Low loader semitrailer

FAYMONVILLE MAX TRAILER MAX100 4A 8.60 U

Condition: new, overall weight: 141,200 kg, empty load weight: 34,500 kg, maximum load weight: 106,700 kg, operation weight: 34,500 kg, axle configuration: > 3 axles, loading space length: 7,150 mm, loading space width: 2,850 mm, loading space height: 580 mm, color: grey, tire size: 285/70 R19.5, Equipment: ABS, Gooseneck: -Gooseneck hydraulically raises/lowers and can be removed -Length approx. 3,650 mm -Extensive lashing positions -For tractor units: 6 x 4 or 8 x 4 3-axle compact front chassis: -Hook attachments at the front and rear -Chassis length x chassis width approx. 3,560 mm x 2,850 mm -Extensive lashing positions Excavator bridge "BB-A": -Telescopic excavator bridge "BB-A" with drive-over bridge hooks at the front and with bolt-and-link coupling at the rear -Length x base width approx. 7,150 mm x 2,850 mm -Beam height x beam width approx. 430 mm x 1,350 mm -Loading height 580 mm with ground clearance 150 mm -5 pairs Hanging lashing rings (LC 10,600 daN) -4 pairs of M30 threaded blocks on the inner beam for mounting screwable rings 5-axle rear chassis: -Mechanical bolt-on coupling for attaching a drop-bed at the front, end cross member at the rear -Chassis length x chassis width approx. 6,840 mm x 2,850 mm -Extensive lashing positions Pendulum axle and tires (front and rear chassis): -"PENDULUM AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and cotter pins for securing in the raised position -Final painting of the axles with two coats of 2-component paint, painted in MB 7350 Nova Gray Kjlhccqswhywfekslt -Technical axle load: 14,640 kg (62) km/h) -Hydraulic axle compensation -Axle tool -Tires 285/70 R19.5 Steering: -Steering can be operated from the front and rear using a cable remote control with push buttons, with axle alignment control -Socket for operating the steering on the gooseneck -Cable remote control with push buttons including axle alignment control Accessories included: -Yellow-red air couplings on the galvanized connection strip at the front -Steel bulkhead, approx. 400 mm high -4 wheel chocks with brackets -2 spare wheels 285/70 R19.5 -3.5" kingpin -Gallows with winch for spare wheel on the front of the gooseneck -Truck hydraulic connection with flow regulator (40 l/min), including a boom for suspending the supply lines. The tractor unit's tank must have a capacity of at least 80 liters. Couplings -White reflective tape in accordance with EU regulations on the sides and extension, red at the rear -Aluminum side walls and rear wall, approximately 400 mm high, anodized, attachable to the gooseneck -Operating lever on the gooseneck protected by a hinged cover -A separate air connection with an air gun on the gooseneck -Bekamax central lubrication system with NLGI-2 grease, 1x on the gooseneck, 1x on the 3-axle chassis, and 1x on the 5-axle chassis -Variomax tool kit -Multi-coupling hydraulic connections in the area of the low-bed hook receptacle -Front chassis with a separate air connection for pneumatic screwdrivers -Screw-in option (ø 40 mm) every approximately 500 mm on the outside of the upper chord of the outer tube of the excavator bridge for screw rings -Foldable extensions with steel mattresses, adjustable in width from approximately 2,850 mm to approx. 3,250 mm -Steel mattresses with rubber flooring, approx. 12 mm thick -Two stainless steel toolboxes (855 x 340 x 390 mm) -Radio remote control for the steering in addition to the cable remote control -Painted sand layer as anti-slip protection -1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Condition: used, overall weight: 48,000 kg, maximum load weight: 36,210 kg, axle configuration: 3 axles, first registration: 09/2023, next inspection (TÜV): 10/2025, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck * with bevelled corners at the front approx. 45° and with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area * in extendable version with rear bevel approx. 1,000 mm x 8° * Can be raised and lowered hydraulically after the gooseneck, length approx. 2,800 mm * 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings that can be folded inwards on the central support at the front (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hanging tensioning straps (LC 2000 daN) * Grating flooring C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm) * Checkered sheet covering above the axles Klolhccqevzi E Hjkjt Two-part steel ramps * A pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating covering C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable and unfoldable ramp sections * Hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: approx. 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in the driving position do not have to be taken into account in the vehicle length of 16,500 mm Axles * BPW axles and Suspension * 2 axles rigid, 1 axle with self-steering * Technical axle load: 12,000 kg each * Electro-magnetic reversing lock can be activated via reverse gear and manually Air suspension * with lifting and lowering valve Tires * 235/75 R 17.5 Seat supports * JOST seat supports (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) Brake system * in accordance with EU regulations with EBS-E (2S2M) * without connecting lines to the tractor unit Paintwork * First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * A high-quality 2-component (2K) top coat in a single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Steel construction * made of high-strength fine-grain steel * Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system * in accordance with EU regulations Lighting * 24 volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin. * Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included * 2 inch kingpin * A galvanized steel bulkhead, approx. 400 mm high * A spare wheel holder in front of the bulkhead * Yellow-red air couplings on the galvanized connection strip at the front * 4 brake shoes with holder on the bulkhead * Galvanized folding supports under the slope of the loading area * A bracket for a rotating beacon at the rear of the trailer * Grating in the slope of the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in the slope of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Cover plates to bridge the free space between ramps and loading area * A painted layer of sand on the checker plates, above the kingpin and the loading area as anti-slip protection * Yellow reflective tape in accordance with EU regulations on the side and rear of the trailer * Elec

Condition: new, overall weight: 48,000 kg, maximum load weight: 34,030 kg, axle configuration: 3 axles, total width: 2,480 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area Loading area after the gooseneck can be raised and lowered hydraulically, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of tension rings that can be folded inwards on the central beam at the front (LC 10,000 daN) * Grating flooring C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm) Kljlhev Dz Ifeccqkjt * above the axles Checkered sheet covering Two-part steel ramps * A pair of galvanized two-part steel ramps in a reinforced design, approx. 3,185 + 1,420 x 1,250 mm, with grating covering C40/5 (point load approx. 8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable and unfoldable ramp parts and hydraulic lifting mechanism, maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in the driving position do not have to be taken into account in the vehicle length of 16,500 mm Seat supports * JOST seat supports (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) Tires * 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system in accordance with ECE R 141 Axles * BPW axles and suspension * 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electro-magnetic reversing lock can be activated via reverse gear and manually * Air suspension with raising and lowering valve Braking system * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Colors Trailer RAL 3002 carmon red * Rims silver * Tarpaulin in RAL 9006 silver Incl. accessories 1 spare wheel holder under the loading area on the right in the direction of travel * 2 inch kingpin * A galvanized steel bulkhead * On the galvanized connection strip at the front, yellow-red air couplings * 4 brake shoes with holders on the front wall * 3 heights of wooden boards * Galvanized folding supports under the slope of the loading area * Height-adjustable tarpaulin structure - 3,960 mm? * Galvanized front wall with a tensioning mechanism for the sliding curtains * EDSCHA roof, height-adjustable by approx. 400 mm, can be moved forwards on aluminum roof belt profiles (screwed to the front and rear walls) * 3 pairs of movable stanchions in the loading area * The structure can be moved hydraulically to the left and right by approx. 750 mm at the rear. can be extended * Sliding tarpaulin with approx. 700 mm reserve in length, with tensioning belts at intervals of approx. 600 mm * Height of top edge of body approx. 3,960 mm (loaded) Driving with the sliding roof open is not permitted and will damage the tarpaulin * A layer of sand painted on the checker plates on the gooseneck and on the loading area to prevent slipping * Cover plates to bridge the space between the ramps and the loading area * Electro-hydraulic unit at the rear under the loading area * A holder for the warning signs on the gooseneck and on the ramps on the left and right, including a socket * Control valves for the ramps mounted on the right-hand side of the trailer * Grating in the slope of the gooseneck C30/3 (point load approx. 2 t on an area of 20 x 20 cm) * Grating in the slope of the loading area C40/5

Condition: new, overall weight: 50,960 kg, maximum load weight: 39,590 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck * with hardwood covering approx. 30 mm thick. Gooseneck at the rear in a straight design * 3 pairs of lashing rings (LC 5,000 daN) Loading area * in an extendable design * 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) Kljlhccsvz Rfusqkjt * 1 pair of lashing rings lying in the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hanging tensioning straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checkered sheet metal flooring above the axles Seat supports * JOST seat supports (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) Axles * BPW axles, two axles rigid, two axles with trailing steering * air-suspended, with lifting/lowering function * Self-steering axles with electro-magnetic reversing lock, activated via reverse gear or manually * Drum brakes Tires * 205/65 R 17.5 Brake system * in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction * made of high-strength fine-grain steel * Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork * First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * A high-quality 2-component (2K) top coat in a single color in RAL 3002 carmine red * Rear section metallized and in RAL 9010 (pure white) painted * Rims in silver Accessories included * 2 inch kingpins * A spare wheel holder in front of the bulkhead * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with holders on the bulkhead * Galvanized folding supports under the slope of the loading area * A bracket for a rotating beacon at the rear of the trailer * Yellow reflective tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer * A bracket for the warning signs on the gooseneck and on the rear panel on the left and right, including a socket * A mud flap at the rear of the trailer * Manual and description on USB stick * European reflector signs (red-yellow) on the rear of the trailer * Speed sticker 80 km/h at the rear and on both sides * Load gauge for determining the axle loads including load diagram * A galvanized steel bulkhead (EN12642-XL), approx. 1,200 mm high * Support stand with 1 pair of WADER container pockets, load capacity approx.: 20,000 kg * 7 pairs of WADER container pockets for: 1x 20' container or 1x 40' container in the loading area, 1x 40' container above the gooseneck or 2x 20' containers * 7 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area * A galvanized bracket across the loading area * Galvanized extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading status * Movable suspension rails for aluminum docking ramps at the rear of the vehicle * Bracket for aluminum docking ramps, across the loading area in front of the axles * 1 pair of recessed lashing rings along the central beam at the rear in the bevel (LC 10 000 daN) * 2 LED reversing lights mounted on the rear panel * 2 pairs of Ferry rings under the gooseneck and 2 pairs at the rear * An acoustic warning signal when

Condition: new, overall weight: 48,000 kg, maximum load weight: 36,210 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck * Gooseneck with bevelled corners at the front approx. 45° and with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area * in extendable version with rear bevel approx. 1,000 mm x 8° * Can be raised and lowered hydraulically after the gooseneck, length approx. 2,800 mm * 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings that can be folded inwards on the central support at the front (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hanging tensioning straps (LC 2000 daN) * C40/4 grating (point load approx. 2.3 t on an area of approx. 20 x 20 cm) * Checkered sheet covering above the axles Two-part steel ramps * A pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable and unfoldable ramp parts * Hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: approx. 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in the driving position do not have to be taken into account in the vehicle length of 16,500 mm Axles * BPW axles and suspension * 2 axles rigid, 1 axle with self-steering * Technical axle load: 12,000 kg each * Electromagnetic reversing lock can be activated via reverse gear and manually Air suspension * with lifting and lowering valve * Axle tool Tires * 235/75 R 17.5 3PMSF Seat supports * JOST seat supports (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) Braking system * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Painting * First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * A high-quality 2-component (2K) top coat in a single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) * No metallic painting possible Steel construction made of * high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system * in accordance with EU regulations Lighting * 24 volts ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included * 2 inch kingpin * A galvanized steel bulkhead, approx. 400 mm high * A spare wheel holder in front of the bulkhead Kslheu Enyueccqkolt * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with holder on the bulkhead * Galvanized folding supports under the slope of the loading area * A bracket for a rotating beacon at the rear of the trailer * Grating in the slope of the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in the slope of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Cover plates to bridge the free space between ramps and loading area * A painted layer of sand on the checker plates on the gooseneck and the loading area as anti-slip protection * Yellow reflective tape on the sides and rear i

Condition: new, overall weight: 73,000 kg, maximum load weight: 58,760 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck * with bevelled corners at the front approx. 45° and with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Klslhccovcvizjqkot Loading area * in extendable version with rear bevel approx. 500 mm x 8° * 8 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings lying in the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hanging tensioning straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checkered sheet flooring above the axles Two-part steel ramps * A pair of galvanised two-part steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber covering. Ramp with hydraulically foldable and unfoldable ramp parts * Hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: 40,000 kg Axles * BPW axles and suspension, 1st axle with leading steering, 2nd and 3rd axles rigid, 4th and 5th axles with trailing steering, air suspension, with lifting/lowering function, drum brakes * Trailing steering axles with electro-magnetic reversing lock, can be activated via reverse gear or manually * Technical axle load: 12,000 kg each Tires * 235/75 R 17.5 3PMSF Seatposts * JOST seatposts (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) Braking system * Wabco Brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction * made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system * in accordance with EU regulations * Lighting 24 volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin connection in accordance with ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork * First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * A high-quality 2-component (2K) top coat in a single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Incl. the following additional equipment * 2 inch kingpin * A galvanized steel bulkhead, approx. 400 mm high * A spare wheel holder in front of the bulkhead * Yellow-red air couplings on the galvanized connection strip at the front * 4 brake shoes with holder on the bulkhead * Mount in the rear area of the gooseneck for aluminum docking ramps * A bracket for a rotating beacon at the rear of the trailer * Galvanized Supports under the slope of the loading area * Super Grip 25 rubber covering in the slope of the loading area * Cover plates to bridge the space between the ramps and the loading area * Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer * Electro-hydraulic unit at the rear, under the loading area * A holder for the warning signs on the left and right of the gooseneck and on the rear panel, including a socket * TPMS tire pressure monitoring system in accordance with ECE R 141 * Load gauge for determining the axle loads, including load diagram * Aluminum side walls and rear wall on the gooseneck, plug-in, approx. 2,440 x 400 mm (L x H), the rear galvanized plug-in stanchions are removable (length of the structure approx. 2,560 mm) * A galvanized tool

Condition: new, overall weight: 50,960 kg, maximum load weight: 39,720 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck * with bevelled corners at the front approx. 45° and with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area Loading area in extendable version * 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings lying in the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hanging tensioning straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checkered sheet metal flooring above the axles Seat supports * JOST (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles * BPW axles, two axles rigid, two axles self-steering, with drum brake * Air suspension with lifting/lowering function * Self-steering axle with electro-magnetic reversing lock, can be activated via reverse gear or manually * Tires: 205/65 R 17.5 Braking system * Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction * made of high-strength fine-grain steel * Steel qualities: S355J2+N/S355MC (yield strength 355MPa)S690QL/S700MC (yield strength 690MPa) Paintwork * First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) coating Zinc dust primer * A high-quality 2-component (2K) top coat in a single color in RAL 3002 carmine red * Rear part metallized and painted in RAL 9010 (pure white) * Rims in silver Accessories included * 2 inch kingpin * A galvanized steel bulkhead approx. 400 mm high * A spare wheel holder in front of the bulkhead * Yellow-red air couplings on the galvanized connection strip at the front Kelhccqsu Sd U Uskjlt * 4 brake shoes with holder on the bulkhead * Mount in the rear area of the gooseneck for aluminum docking ramps * Galvanized folding supports under the slope of the loading area * A bracket for a rotating beacon at the rear of the trailer * Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer * A bracket for the warning signs including a socket on the gooseneck and on the rear panel on the left and right * TPMS tire pressure monitoring system in accordance with ECE R 141. The data is transferred to the towing vehicle via the standardized EBS interface according to ISO 11992. For correct display, the towing vehicle must be able to transfer and display this data. * On the gooseneck aluminum side walls and rear wall, pluggable, approx. 2,440 x 400 mm (L x H), the rear galvanized plug-in stanchions are removable. (Length of the body approx. 2,560 mm) * A galvanized toolbox, integrated in the beveled gooseneck * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' container or 1 x 40' container * Movable hanging rails for aluminum docking ramps at the rear of the vehicle * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * A galvanized bracket across the loading area * Galvanized extensions, extendable by approx. 230 mm on each side * Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading condition * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * 1 pair

Condition: used, overall weight: 61,000 kg, empty load weight: 18,500 kg, maximum load weight: 42,500 kg, operation weight: 18,500 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, first registration: 02/2025, color: grey, tire size: 245/70 R 17.5, Year of construction: 2025, Equipment: ABS, You will receive a current and complete inspection and functional report for every used trailer. Gooseneck: - Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm - Gooseneck hydraulically raises/lowers and can be removed - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external supports in extendable design, "SUPER LOW" design, length approx. 7,550 mm - Lowbed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: - Rear chassis with closed outer frame, checker plate flooring, and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear - Extensive lashing positions Axles and tires: - "PENDEL-AXLE", all axles hydromechanically steered - Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinders with shut-off valves and cotter pins for securing in the raised position -Final painting of the axles with two coats of 2-component paint in a single color, "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires: 245/70 R 17.5 Braking system: -WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Accessories included: -Prepared for screw-on container positioning for 1x 20ft or 1x 40ft container on the outer beams -2" kingpins -One galvanized steel bulkhead, approximately 400 mm high -Yellow-red air couplings on the galvanized front connection strip -Steering from the front and rear via Cable remote control operated via push buttons, with axle alignment control - Hydraulic connections from the gooseneck to the lowbed with multi-coupling instead of screw coupling - Electro-hydraulic unit - White reflective tape in accordance with EU regulations on the sides, on the extension, and at the rear (red) - Two wooden blocks (500x250x200 mm) - European reflective signs (red-yellow) on the rear of the trailer - One bracket for warning signs, including a power outlet, on the gooseneck and on the rear panel on the left and right - Central lubrication system with two BEKAMAX pumps - Load gauge for determining axle loads, including a load diagram - Aluminum side walls and rear wall, attachable to the gooseneck, approx. 2,000 x 400 mm - A separate air connection with an air gun on the gooseneck - Duomatic air coupling from the gooseneck to the lowbed - Gooseneck closed in the rear upper area with a removable cover - One pair Steel ramps for bridging the low-bed's hooks -Four warning signs, approximately 423 x 423 mm, extendable by approximately 400 mm -Radio remote control for the self-steering system in addition to the cable remote control, with indicator lights on the receiver for tracking control -6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting RUD VLBG-4 screw-on rings -7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area -Foldable extensions, approximately 230 mm per side -2 pairs of RUD VLBG-4 M24 screw-on rings (LC 8,000 daN) -A coated layer of sand on the loading area acts as a slip guard Kjlhccqjwk Hk Dskolt -Dipper handle recesses of the rear chassis, closed at the front and rear with a plug-in plate -HRM (High Resistance Metallization) coating of the outer frame -Complete Steel construction shot blasted, then the defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminum 15%) and hot-coated

Condition: used, Functionality: fully functional, empty load weight: 10,700 kg, first registration: 06/2015, Year of construction: 2015, FAYMONVILLE Max Trailer F-S44-1A1Y Length: 13,050 mm Width: 2,550 mm Front tire: 235/75R17.5 Rear tire: 235/75R17.5 Wheelbase: 1,360 mm Total permissible weight: 40,000 kg Payload: 29,300 kg Empty weight: 10,700 kg Equipment: Cable winch 2" kingpin Operation via 2-pin NATO connector 4 SAF axles 2x steerable ABS Rear support Kjlsvx R Nhehccqkelt ESB Hydraulic loading ramps (steel ramps) Telescopic Drum brake

Condition: used, overall weight: 38,000 kg, empty load weight: 9,870 kg, maximum load weight: 28,130 kg, axle configuration: 3 axles, first registration: 02/2018, suspension: air, tire size: -, Year of construction: 2018, Equipment: ABS, Ref: VO25-1753 For Sale: Max Trailer Faymonville Semi-Trailer, 2018, 49.5T Exceptional Convoy Make/Model: Faymonville Max Trailer Year: 2018 Type: Semi-trailer Chassis: YAMT13XX4H010 GVW: 38 tonnes Exceptional Convoy: Approved up to 49.5 tonnes Technical Specifications: Axles: 3 axles Lifting axle Suspension system: Pneumatic with steerable axles Platform: Reinforced high-strength steel floor Loading ramps: Hydraulic ramps Additional equipment: Hydraulic system: Power take-off for use with additional equipment LED lights Braking system: Air brakes with force distribution Special load compatibility: Complies with current regulations for the transport of heavy and wide objects up to 49.5 tonnes Contact us for more information. Kljlsv Tdmcohccqkjt Lifting axle Tire information: 235/75 R17.5 Surface area: 33,401 m² Width: 2.54 m Height: 3.4 m ABS Serial number: YAMT13XX4H010