Low loader semitrailer

MEUSBURGER MTS-3 - TIEFBETT - TELESKOP - Nr.: 798

Condition: used, Equipment: soot filter, - Air conditioning- 3x shovels- Powertilt- Top conditionSuspension: Hydraulic Fodpjvdpn Tjfx Afmjpp

Condition: new, overall weight: 47,000 kg, axle configuration: 2 axles, Year of construction: 2025, Technical data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Total weight: 47,000 kg Fifth wheel load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3,750 mm Fifth wheel height loaded: 1,200 mm Steering radius to the rear: 2,300 mm Loading area length: 6,850 mm Extendable by: 5,500 mm Loading height with max. load: 350 mm Chassis length: 2,600 mm Loading height of rear chassis with max. load approx: 1,005 mm Suspension travel: -150/+450 mm Axle spacing: 1,360 mm Total width: 2,540 mm Total weight depends on fifth wheel load. Low bed: Low bed with external supports in extendable design "SUPER LOW" design, length approx. 6,850 mm. Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking. Fjdpfsizu Nwsx Afmopp The supply lines are protected in the extendable supports and automatically adjust to the respective low bed length. 5 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 6 pairs of threaded blocks on the inner support for mounting screwable RUD rings. Rear chassis: Rear chassis with closed outer frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of tension rings lying in the trough (LC 8,000 daN+5,300 daN). 2 pairs of stake pockets for 100 x 50 mm stakes in the outer frame Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,785 mm. Gooseneck can be raised/lowered hydraulically and removed. Technical fifth wheel load: 23,000 kg For tractor units: 4 x 2, 6 x 2 and 6 x 4 PENDEL-AXLE: "PENDEL-AXLE", all axles hydro-mechanically forcedly steered. Hose rupture valve on the axle compensation cylinder with automatic RESET function. Hydraulic cylinder with shut-off valves and pins for securing in raised position. Final painting of the axles with 2 layers of 2-component paint in a single color in "FAY-Gray-34-0260". Technical axle load: 12,000 kg Hydraulic axle compensation. Axle tool. Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting cables to the tractor unit. Electrical system: Electrical system in accordance with EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: Steel construction made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paint: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) top coat in a single color in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint possible. Tires: Tires 245/70 R 17.5 3PMSF At the manufacturer's discretion. Load index (146/146F) Preparation for screw-on container positioning for 1x 20' or 1x 40' container on the outer supports. Without container locks. i i2" kingpins iA galvanized steel bulkhead, approx. 400 mm high. iA spare wheel with holder in front of the bulkhead. i2 brake shoes with holder on the bulkhead. iYellow-red air couplings on the galvanized connection strip at the front. Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles. (without insta

Condition: used, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, first registration: 03/2024, loading space length: 6,850 mm, loading space width: 25,400 mm, loading space height: 350 mm, tire size: 245/70 R 17.5, color: grey, Year of construction: 2024, Equipment: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,785 mm long - Gooseneck hydraulically liftable/lowerable as well as detachable - Technical kingpin load: 23,000 kg - For tractor units: 4x2, 6x2, and 6x4 Loading Area: - Low-bed with external beams in extendable “SUPER LOW” design, approx. 6,850 mm in length - Low-bed section with fixed hardwood floor, approx. 40 mm thick, and pneumatically actuated locking mechanism - Supply lines are protected inside the extendable beams and automatically adapt to the respective length of the low-bed - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD lashing rings Rear Chassis: - Rear chassis with closed outer frame, checker plate covering, and continuous prism-shaped excavator trough approx. 1,250/700 x 505 mm, open at the rear Axles and Tyres: - Pendulum axles, all axles hydro-mechanically forcibly steered - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and positioning pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Axle tool kit - Tyres: 245/70 R 17.5 Braking System: - Braking system compliant with EU regulations with EBS-E, without connection lines to the tractor unit Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer - Rear section metallized and painted in RAL 9010 Included Accessories: - Prepared for bolted container locks for 1x 20' or 1x 40' containers on the external beams - One galvanized steel front wall approx. 400 mm high - At the galvanized front connection bar, yellow and red air couplings - 2 wheel chocks with holder on the front wall - Rear steering from front and rear via cable remote control with push buttons, including single-track control of the axles - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of threaded couplings Fpsdpfxjrtqyls Afmjp - Electro-hydraulic unit - On the gooseneck and on the rear plate, left and right, a holder for warning panels incl. socket - On the gooseneck, plug-in ALU side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable - 5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area, 2 pairs in the outer frame of the chassis - Folding extensions, approx. 230 mm per side - 1 pair of steel ramps for bridging the low-bed mounting hooks - 80 km/h speed stickers at the rear and on both sides - On the warning boards, a mount for a revolving beacon - Radio remote control for rear steering in addition to the cable remote, with LED indicators on the receiver as single-track control - Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pump - Excavator dipper trough at the rear chassis closed at the rear with a plug-in plate

Condition: excellent (used), first registration: 09/2015, loading space length: 20,180 mm, loading space width: 3,000 mm, Year of construction: 2015, YAFTL2007F0017329 = More information = Empty weight: 13,600 kg Payload: 28,400 kg GVW: 42,000 kg Extendable body: Yes Technical condition: very good Visual condition: very good Damage: none Contact Sales for more information. Fjdjrywukepfx Afmspp = Company information = If you have any questions or suggestions, Don't hesitate to contact us. We guarantee an answer within 8 hours. Prices are without VAT. No rights could be derived from given information. Office Phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano)Available on What's App and Viber. MOB: Nederlands) Available on What's App and Viber. When you pay by bank transfer, the money needs to be tranfered to our Bank Account underneath. Always check the payment details that are stated on our website. In case you have received other information please contact us. In case you have doubts please call us so we can verify the invoice and/or payment. Bench details: Rabobank Lane of Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/BTW/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: used, Year of construction: 2023, operating hours: 11 h, front tire size: 600/70R30, rear tire size: 600/70R30, Equipment: air conditioning, cabin, front power take-off, onboard computer, ref: 6890 60 Km/h Front PTO BKT 600/70R30 4 rear & 2 front spool valves Front hitch Double-acting suspension Ladder and sway bar support 38mm rocker arm on ladder with remote release Fjdem Shg Ijpfx Afmjpp Reinforced axles with hydraulic locking differential Rotating beacon 2 Additional high beam headlights Front 7-pin (lighting) & 3-pin (power) sockets Rear 3-pin socket K80 + 2 x K50 LED work lights: 8 front & 6 rear LED high beam Control of hydr. distributor on rear mudguard Steering wheel-mounted shuttle 3.5mm audio jack Leather driver & passenger seats Automatic stabilizer Field performance pack with radar Active traction & headland management Heated windscreen + heated rear window Field pro pack with GPS predisposition & rapid steer Air brakes + Duomatic Isobus Loas sensing Large rear-view mirrors 900 Kg weight Trimble pre-equipment Power: 230CV DIN Number of drive wheels: 4 Tire or chain information: 600/70R30 Transmission type: Continuous Rear power take-off Front power take-off On-board computer Suspended cab Roll-over bar Differential lock Cab Heating Air conditioning Hydraulic distributor Suspended front axle Rear hitch Front hitch Rotating beacon Car radio Condition: New Power: 169kW

Condition: new, machine/vehicle number: 1, empty load weight: 7,500 kg, maximum load weight: 22,500 kg, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 10,070 mm, loading space width: 252 mm, loading space height: 85 mm, suspension: air, tire size: 245.70 r 17,5, color: yellow, Year of construction: 2022, Equipment: ABS, tail-lift, 10.70m new ceylan 2-axle truck 2 axles, 1st liftable and 2nd steerable, ebs, air suspension, 8 ton side rud hooks cad1, pier seats and slots in dock x belt anchorage, 4.0m total electro hydraulic double ramps, h.from ground platform 85cm, platform length 7.0m, WARRANTY and READY FOR DELIVERY SAFETY, INTERDRIVE SRL-PARMA CONCESSIONARIA Fpedeh Utdlspfx Afmjp

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg Fsdpohlz R Ssfx Afmjpp -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: new, machine/vehicle number: 1, empty load weight: 11,000 kg, maximum load weight: 28,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 870 mm, suspension: air, tire size: 245.70 r 17.5, color: dark red, Year of construction: 2020, Equipment: ABS, new ceylan trailer to be registered , 3 axles with 1st liftable and 3§°steerable, ebs, double full-side electro hydraulic ramps, wideners, winch predisposition, lower part height 87cm, length 9.95m, total 13.65, rud hooks, immediate delivery except sold-warranty-CONCESSIONARY INTERDRIVE SRL-PARMA Fpodpeh S Aw Rjfx Afmep

Condition: like new (used), functionality: fully functional, mileage: 113,000 km, number of beds: 2, number of seats: 4, fuel type: diesel, gearing type: automatic, color: white, Year of construction: 2012, Equipment: ABS, additional headlights, air conditioning, airbag, awning, bathroom, cable winch, central locking, electronic stability program (ESP), fog lights, lift bed, non-smoking vehicle, onboard computer, onboard kitchen, parking heater, satellite antenna, shower, solar array, soot filter, trailer coupling, VEHICLE IN EXCELLENT CONDITION, ELECTRIC REAR DOOR WITH POSSIBILITY TO LOAD A SMART FOR TWO, SKI RACK WITH DEDICATED SKI BOOT WARMERS, UNDERFLOOR HEATING, STATIONARY AIR CONDITIONING, INVERTER FOR SOLAR PANELS, MARINE BED, GENERATOR, SIDE AWNING, DOOR OPENING WITH ACCESS CODE. Possibility to include the Smart in the negotiation. Fpodjw A St Iopfx Afmep

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Axles and tires: -"PENDEL-AXLE", all axles with hydromechanical forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with stopcocks and locking pin for securing in raised position -Technical axle load: 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 / 3PMSF tires Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer Fpjdjh Hm Thspfx Afmjp -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)