Used Stas Tipper Trailers for sale (133)

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama tarpaulin 900g -10 mm floor -V-plates 2000x1500x4 -Service door on the front wall -12 pairs of lashing eyes in the front wall Chassis: Reinforced version with continuous chassis, new structure manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version Axle and suspension "disc brake 22.5" Jost axle units version, 3*9 tons with DCA - air suspension, lifting and lowering, Wabco Smartboard, electronic brake wear system BVA, 1st axle with traction aid (without tractor unit equipment) Tires and wheels 6 wheels with tires of size 385/65 R 22.5 premium tires Ww. on steel rims, 11, 75*22.5 ET 120 Seat post mech. Support winches, 2x20 ton support load Braking system EBS E-system Wabco with RSS system (Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear Electrical system According to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear end, 24 volt system with 1*15-pin and 2*7-pin socket, with side outline lights in LED design 2 separate LED reversing lights integrated in the U-protection, Structure/trough: "structure fully welded inside" reinforced side walls Aluminum trough, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, ALU front wall with 600 mm plank profile 2-3 mm thick in straight design, with 2 ALU wing doors 50/30 mm thick, running residual emptying wall with Kevlar tarpaulin approx. 1,500 mm long plus side with Kevlar ? plan seal Hydraulic system: ?Cargo ? Floor? sliding floor system Sliding floor system in the floor with hydraulically moved ALU ? profiles Crob E Hofi Nmpou Sijb on ALU ? Square profiles with approx. 880 PE-HD sliders, type CF 8 mm floor version, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, operating pressure 190 - max. 240 bar, ALU end pieces welded into the moving floor, without hydraulic hoses Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 1 ALU E wheel holder, side aluminum collision protection in foldable version, 1 tool box approx. 860*460*400 mm in plastic, 3.7 m aluminum ladder, roll-up tarpaulin approx. 660gr./m2 with roll-up tarpaulin system including roll-up slats if required with side. Tension belts or with quick release, walkway on the front wall with access, 3 steel bows with locking mechanism that can be swung out and locked, aluminum protective cover with hinges that can be folded down for lighting, etc... +590¤ transfer costs Empty weight: approx. 7,700 kg Offer and images subject to change

Condition: used, overall weight: 42,000 kg, maximum load weight: 33,650 kg, axle configuration: 3 axles, loading space volume: 90 m³, first registration: 07/2015, next inspection (TÜV): 11/2024, Year of construction: 2015, * Stas S 300 ZX C1A L21 DA Crjb Esu Rkq Ho Hu Sieb * Year of construction : 07/2015 * 3 axles * Air suspension * Walkingfloor * Tarpaulin * Unladen weight : 8,350 kg * 42,000 kg * Tüv until 11/24 Internal number : 24A044

Condition: new, overall weight: 36,000 kg, maximum load weight: 28,160 kg, axle configuration: 3 axles, loading space length: 13,513 mm, loading space width: 2,475 mm, Year of construction: 2025, Equipment: ABS, Kingpin load national (t) 12 Cjb E Hjvy Rc Dju Sijrb Axle load national (t) 8 Axle distance (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1200 Internal height front (mm) 2641 Internal height rear (mm) 2778 Total width (mm) 2550 Total length (mm) 14000 Chassis steel Axles JOST Brake type JOST - DCA-T7 Offset (ET) 120 Option 1st axle with lift axle and traction aid Activation of traction aid via button in the truck Option 3rd axle with lift axle Brake pad wear indicator connected Tire pressure monitoring Wabco Trailerpulse Air suspension ECAS with raising and lowering valve Lowering of the air suspension via smartboard, as well as raising Lowering valve Coupling head pneumatic European Palm coupling Rims steel Weweler landing gear as steel gear landing gear, Weweler type, with leveling feet, one-sided operation and 2 speed levels Fixed underrun protection operation Mud flaps underrun protection across the entire width of the underrun protection EBS operation in the direction of travel on the left, behind the axles Operating console moving floor in the direction of travel on the left, behind the axles Tool box in the direction of travel on the left, behind the axles Manufacturer lighting Aspöck Lighting ECOLED II 2 LED reversing lights, rear in the direction of travel on the left and right on the lamp holder Position of work lights (operated via switch) 2 LED reversing lights at the front left and right Hydraulic coupling rotary coupling Hydraulic coupling - size 3/4" Hydraulic coupling - gender female Hydraulic coupling - hose 3,000 mm Hydraulic coupling - position Connection option on the front wall (additional connection option on the support legs) Standard Smartboard Air connection on the side of the dashboard Aluminum lean-to ladder 3.80 m - right in the direction of travel Position of broom and shovel holder on the side impact protection on the left Two plastic chocks including bracket Moving floor system made by Cargo Floor Air and electrical console in the middle in the direction of travel Construction Rear wall type with hinged doors A-plate foldable on the door, right Cover plate between floor and front wall Solid aluminum plate and PVC strips Front wall profile 3 mm - 2 mm Side wall profile 3 mm - 2 mm in smooth design inside and outside, double-walled profiles 600 mm wide - 30 mm thick Wear plates Rectangular 1500 x 1000 x 4mm Distance between lower corner profile and upper side wall on the back 2649 Operation of floor system radio remote control Cargofloor Control type CF 500 SL-C - "E"-CONTROL Floor profiles 21 Floor profile type 8 mm flat Stainless steel sliding floor end plate With additional plastic guides below the floor profiles End cap reinforcement Stainless steel shoes above the end caps of the floor profiles, with aluminum wear plate above the end caps Oil temperature sensor sliding floor system Complete emptying wall Type of complete emptying wall aluminum Storage of complete emptying wall 6 wheels with bidirectional cleaning (loading floor) Rear wall aluminum Design of wing door, 1/2 to 1/2 division, with door crossbar Opening of the door wings, right door wing opens first Door crossbar in pivoting design Material of door crossbar aluminum Locking of rear doors 1x turning rod / door half Left door wing 2 door handles per turning rod Right door wing 1 door handle per turning rod Fastening of the opened door wings spring holder with plastic protection Seal Rear wall with standard rubber seal Additional locking rear wall

Condition: used, overall weight: 39,000 kg, maximum load weight: 31,550 kg, axle configuration: 3 axles, first registration: 12/2002, Equipment: ABS, Fahrzeug-Ident-Nr.: YE6SZ336V200R0665 DE HU due Tare weight: 7,450 kg Volume: approx. 84.0 m³ Dimensions: 13,470 x 2,480 x 2,430 / 2,600 mm SAF axles with disc brakes LIFTACHSE Air suspension Support legs Platform Roll-up tarpaulin Tires: 385/65 R 22.5 Crjb Ejvdg Sie Hu Sijb Spare wheel holder WITHOUT spare wheel 5 x aluminum rims - 1 x steel rim

Condition: used, axle configuration: 3 axles, loading space length: 13,350 mm, loading space width: 2,470 mm, loading space height: 2,750 mm, first registration: 07/2006, suspension: air, color: other, tire size: 385/65 R22.5, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Hydraulics = Remarks = Chassis Chassis height: 100 cm Height of coupling pin / drawbar: 120 cm Structure Hydraulics: ✓ Cebeu H Di Io E Hu Sisrb Aluminium walking floor trailer, Internal dimensions 1335x247x275 cm, Volume approx 90 m3, Floor height 110 cm, Aluminium/plastic partition (manually adjustable), ABS, Air suspension, Disc brakes, Mercedes axles, Max. gross trailer weight 39000 kg, Shipment dimensions 1395x250x400 cm = More information = Axle configuration Tyre size: 385/65 R22.5 Make axles: Mercedes Brakes: disc brakes Suspension: air suspension Axle 1: Tyre profile left: 65%; Tyre profile right: 10% Axle 2: Tyre profile left: 75%; Tyre profile right: 15% Axle 3: Tyre profile left: 70%; Tyre profile right: 15% Measures Dimensions (LxBxH): 1395 x 250 x 400 cm Weights Empty weight: 7.960 kg Carrying capacity: 31.040 kg GVW: 39.000 kg Functional Make of bodywork: Stas Height of cargo floor: 110 cm Identification Registration number: QAZ297 Serial number: YE6SZ339V600R0459 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, overall weight: 38,000 kg, empty load weight: 8,000 kg, maximum load weight: 30,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 92 m³, first registration: 10/2005, next inspection (TÜV): 10/2020, suspension: air, color: red, tire size: 385.65 r 22.5, Year of construction: 2005, machine/vehicle number: 1, Equipment: ABS, tail-lift, stas 92m3 semi-trailer, 21-slatted moving floor ideal for waste with hydraulic adjustable sealed tailgate and closed roof for 2\3 , 3 disc axles with 3rd steerer, walkway in header, year 2005, overhauled until 31.10.2020-CONCESSIONARY INTERDRIVE SRL-PARMA Csb Ejh I Id No Hu Sierb

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength? Aggregate chassis made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering? Wabco Smartboard? electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment)? 1st + 3rd axle separately liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and wheels 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel + approx. 120 kg) Seatposts Aluminum drop supports, Made of aluminum alloy, 2 - 10 tonne support load, we use swivel feet for air suspension Crsb Ejgcw Rio Hu Siob Brake system according to E.E.G. standard, dual-line braking system, EBS E - system Wabco with RSS system (roll stability support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical system according to the STVZO guidelines with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear end, 24 volt system with lx 15-pin and 2x 7-pin socket, with side contour lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the seat supports, 1 LED work light inside at the front left can be operated from the outside Structure/trough "structure fully welded inside" Front wall load 17,250 dkn? Rear and side walls 10,250/13,400 dkn aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside ! ! , floor as moving floor system laid on 140 mm aluminum cross beams, floor stacker load approx. 7 ton/m2 cross beams mounted accordingly closely (approx. 350mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design smooth rear wall in straight design with 2 aluminum wing doors 50/30mm thick with 4 rotating rod locks in the welded aluminum rear frame fixed in Teflon bearing and stainless steel bearing. ,running aluminum wall suspended in the reinforced aluminum top belt with "Kevlar tarpaulin" for complete emptying, side brush seal and additional Kevlar tarpaulin on the side, integrated discharge funnel with folding cover plate in the floor closure, operable from the outside on the left at the back, viewing window on the left at the back, 1 test slider in each of the rear doors, so 2 pieces, service door on the left in the front wall Hydraulic system "Cargo Floor" 24 board system - smooth design! Push floor system in the floor with hydraulically moved aluminum profiles mounted on aluminum square profiles with approx. 880 PE-HD sliders, approx. 8mm floor thickness, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, power supply at the rear left with cable operation in a lockable waterproof box, without hydraulic hoses Accessories PVC mudguard with rubber mud flaps, aluminum spare wheel holder, side

Condition: new, overall weight: 36,000 kg, maximum load weight: 28,320 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Version with continuous chassis, newly manufactured in self-supporting ALU construction with corresponding reinforcements in the lower chord for particularly high stability and strength, cross member 140mm high reinforced version (for high floor load) additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to support structure Axles and suspension: Disc brake 22.5, Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA readable in the SZM (display), 1st axle with starting aid (new EC regulation, without SZM equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims silver, 11, 75x22.5 ET 120 Kingpin: 2" - screwed into a 10 mm thick plate Fifth wheels: mechanical landing gear with two speeds, 2x 20 tons drawbar load with swivel foot Brake system: according to E.G. standard, EBS E system Wabco with RSS system (Roll-Stability-Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, ALU air reservoir system Cjb E Hefi Nmweu Sijrb Electrical system: according to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the ALU rear end, 24 volt system with 1x15 pole and 2x7 pole socket, with side outline lights in LED design, 2 reflective panels on the rear, front pole lights 2x white, rear 2x red, 2 sep. halogen reversing lights integrated in the U-protection Body/body: Body fully welded on the inside, reinforced side walls Side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400 aluminum trough, side walls 30mm thick ALU plank profiles (2-3 mm) 600mm wide completely welded in with bottom and top chord, plank profiles fully welded inside, floor laid as a moving floor system on 140mm ALU cross beams, floor stacker load approx. 9 to/m2 Cross beams mounted correspondingly narrow (approx. 350mm), design, special aluminum corner profiles in bevelled design smooth rear wall in straight design with 2 ALU hinged doors 50/30mm thick with 2 espagnolettes Locks in welded-in ALU rear frame fixed in Teflon bearing and Inox bearing, Doors secured in open position with one chain on each side, hard wear plates on the side walls approx. 2000x1500x4mm fully welded, moving residual emptying wall with Kevlar tarpaulin approx. 1800mm long plus side brushes with Kevlar tarpaulin seal, service door in front wall with ladder turning inwards Hydraulic system: Moving floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders plus anti-lifting plain bearings, type CF 10mm floor version, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate possibility for connection of the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design still to be specified, operating pressure 190-max.240 bar, ALU end pieces welded into the sliding floor, electrical operation behind left with remote control integrated in a lockable watertight box, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash plates above the wheels, 1 ALU e-wheel holder, lateral ALU collision protection in folding design, 1 tool box approx. 860x460x400mm in plasti