Used Reisch Tipper Trailers for sale (21)

Year of construction: 2023, Condition: new, Equipment: Compressed Air Brake, Reisch hydraulic 2-axle three-way tipper tipper RD-140.450 Total weight: 14,000 kg Unladen weight (basic equipment): 3,100 kg Payload (basic equipment): 10,900 kg Bridge size: approx. 4,500 x 2,200/2,300 mm Floor thickness: 4 mm Platform height: approx. 1,400 mm Tilt angle: approx. 50° degrees Dropside height: 600 mm Maximum permissible speed: 40 km/h Sturdy frame longitudinal beams cranked in welded construction V-drawbar GNZ 27 Steerable bogie with large Type HE 12 L truck ball race 4-wheel pneumatic brake (two-wire) with automatic load-dependent brake (ALB) Parking brake as parking spindle brake executed Ccclssc Brake connection for 2nd trailer (two-wire) Robust multi-leaf spring VB ADR axle, Teknoax, 400 x 80 mm, Track 1,800 mm Multi-chamber tail light "MULTIPOINT V" in 12 Volt - 2x license plate light - 1 pair of clearance lights - 1 set of side marker lights - 7-pin socket at the rear of the vehicle Tipping hydraulics with lift limiting valve and stopcock Hydraulic connection for 2nd trailer for plug-in Hard chrome-plated hydraulic cylinder Diameter 120 mm, number of cylinder stages cylinder stages 3, cylinder stroke approx. 1800, Oil volume approx. 17.3 liters, Cylinder ball 55 mm, cardan ring type 4 Tires 385/65 R 22.5 NEW, 8-hole, ET 0, A3 Plastic quarter-shell mudguards Automatic trailer coupling with large large coupling jaw, type Rockinger 841, bolt-released version Bolted underride guard, galvanized, with separate light carrier in protected position on the vehicle frame attached. Mudguard bracket and light carrier in galvanized galvanized bolted design Stop for rear drop side Bridge support mounted on the frame Steel bridge floor in torsion-resistant, cavity-sealed profile construction Profiled steel drop sides and attachments with with scuff plates pressed onto the sides and welded-in reinforcement profiles Side walls and rear wall hinged and hinged with central locking, Fixed end wall, removable corner stanchions Climbing aid on the front wall Hestal 664 N locks on front, side and rear walls side and rear walls One-sided vinyl foam adhesive tape approx. 12x3.2 mm black for the side and rear dropside Preparation for spring aid Slider with hand lever in the rear drop side Tensioning chain for continuous drop sides (swinging and foldable, without releasing the chain) releasing the chain) Tarpaulin package: 300 mm extension tips Gable shape, foldable reinforced tarpaulin tube Reinforced tarpaulin tube WITHOUT center support, PVC tarpaulin can be rolled up on one side with ALU slat and crank. Tarpaulin attachment in FR right by means of tarpaulin swivel cramps Lateral tarpaulin rail on the left and right Step platform on the front wall in accordance with UVV Chassis painted in REISCH GREY Bridge floor painted in REISCH-GRAU Drop sides painted in REISCH-GREEN Wheel rims painted in silver

Year of construction: 2023, Condition: new, Equipment: Compressed Air Brake, RT-160.450 Reisch tandem three-way tipper Bridge size: approx. 4,500 x 2,200/2,300 mm Floor thickness: 4 mm Platform height approx. reference tires): 1,210 mm Dropside height: 600 mm 1st attachment height: 600 mm Truck 2-speed geared support winch Air brake system with ALB B9Xipqeiyo Multi-chamber tail light Multipoint V 2x license plate light 1 pair of clearance lights 1 set of side marker lights 7-pin socket at the rear 500/50 R 17 149D BKT FL 693 tires Plastic mudguards Bridge support mounted on frame Tensioning chain dropside with continuous walls COC EU approval document Preparation for spring aid

Year of construction: 2023, Condition: new, Equipment: Compressed Air Brake, 550 REISCH - TIPPER BODY - R-STONE Total weight: 22,000 kg Drawbar load: 4,000 kg Axle load (rear): 18,000 kg Unladen weight (basic equipment): 6,090 kg Payload (basic equipment): 15,910 kg Body size: approx. 5,500/5,725 x 2,300 mm Body floor: 6 mm (HB 400/450) mm Body walls: 5 mm (HB 400/450) mm Body height: 1,250 mm Tipping angle approx.: 50° degrees Hydraulic rear wall K80 Height-adjustable cable carrier 4 tons drawbar load Truck 2-speed gear support winch 4-wheel air brake (two-wire) ALB controller on drawbar suspension Spring-loaded parking brake Unsprung pendulum unit with single wheel compensation Cww0Xnbqss Large truck tail light 2x license plate light 1 pair of clearance lights 1 yarn side marker light 7-pin socket at the rear 600/55 R 26.5 169D AEOLUS tires Mudguard Bridge support mounted on the frame bolted RED/WHITE reflective warning signs to the front and rear Body painted in black 22,000 kg permissible total weight COC approval document

Overall weight: 8,000 kg, Maximum load weight: 8 kg, Operation weight: 8,000 kg, Year of construction: 1991, Condition: used, Maximum speed: 25 km/h, Equipment: Compressed Air Brake, Pendulum dropsides, two-axle, turntable_____2 Side tipper, 2-circuit brake system,Storage location:Customer Csx0Ocjh80

Year of construction: 2019, Condition: used, Equipment: Compressed Air Brake, 550 branded Reisch tandem tipper trailer with standard equipment Year of construction 2019 Permissible total weight 22,000kg drawbar load approx. 4,000kg Body size approx. 5,500/5,725 x 2,300mm Body height approx. 1,250mm Dplwl2 40km/h Drawbar Drawbar tube in sprung design K80 ball head coupling 4-wheel air brake (2-wire) with HAND controller Truck tail lights 650/55R26.5 tires Plastic quarter-shell mudguards Additional return on front lever cylinder (quick lowering) Steel round body (floor 6mm / walls 5mm HB400/450) STONE-R steel round body made of highly wear-resistant HARDOX with sloping front wall + front wall protection roof hydraulically opening rear wall, single-acting cylinder and fixed hook lock

Year of construction: 2023, Condition: new, Equipment: Compressed Air Brake, 550 REISCH - TIPPER BODY - R-STONE Total weight: 22,000 kg Drawbar load: 4,000 kg Axle load (rear): 18,000 kg Unladen weight (basic equipment): 6,090 kg Payload (basic equipment): 15,910 kg Body size: approx. 5,500/5,725 x 2,300 mm Body floor: 6 mm (HB 400/450) mm Body walls: 5 mm (HB 400/450) mm Body height: 1,250 mm Tipping angle approx.: 50° degrees Hydraulic rear wall K80 Height-adjustable cable carrier 4 tons drawbar load Truck 2-speed gear support winch 4-wheel air brake (two-wire) ALB controller on drawbar suspension Spring-loaded parking brake Unsprung pendulum unit with single wheel compensation Large truck tail light 2x license plate light 1 pair of clearance lights 1 yarn side marker light 7-pin socket at the rear 600/55 R 26.5 169D AEOLUS tires Mudguard B9Xxmk7Q7O Bridge support mounted on the frame bolted RED/WHITE reflective warning signs to the front and rear Body painted in black 22,000 kg permissible total weight COC approval document

Year of construction: 2023, Condition: new, REDK-79.400 Reisch 1-axle three-way tipper Bridge size: approx. 4,000 x 2,080 mm Floor thickness: 4 mm Platform height approx. reference tires): 1,140 mm Tipping angle approx.: 50° degrees Dropside height: 500 mm 1st attachment height: 500 mm Permitted maximum speed: 30 km/h Multi-chamber tail light Multipoint Hard chrome-plated hydraulic cylinder 105 mm Tires 19.0/45 - 17 AW 18 PR, Bridge support mounted on the frame Preparation for suspension aid COC EU approval document Dpjnrh

Year of construction: 2023, Condition: new, Equipment: Compressed Air Brake, RUTDK-180.513 Reisch tandem three-way tipper Bridge size (internal dimensions): approx. 5,130 x 2,420 mm Platform height approx. reference tires): 1,030 mm Dropside height: 500 mm Platform height approx. reference tires): 1,030 mm Overall length: 7,250 mm Wheelbase: 1,400 mm Trailer height approx.: 700 - 1,000 mm Stopcock for hydraulics 1 pair of aluminum drive-on ramps, load capacity per pair 9,000 kg, length 3,500 mm, width 350 mm, net weight 63 kg/pc DIN towing eye 50 mm, with crank, infinitely variable height-adjustable Front geared support winch 12 t Support legs at the rear under the loading area Air brake system with ALB 24 V lighting system 5-chamber rectangular truck lights protected mounted Sbbmh0Kf0R with rear fog light, license plate light, triangular rear lights, lane departure warning lights, amber side lights, 2x 7-pin connection plugs plug 2 wheel chocks tires (4x) 435/50 R 19.5 Additional bridge cross member 5.0 Recessed lashing rings, DIN arrangement Climbing aid on the bulkhead Spring aid on the front wall with 2 springs Tool box 750 x 350 mm Body and bridge painted anthracite Rims painted silver Galvanized frame

Year of construction: 2023, Condition: new, REDK-79.400 Reisch 1-axle three-way tipper Bridge size: approx. 4,000 x 2,080 mm Floor thickness: 4 mm Platform height approx. Hu2W8Dk reference tires): 1,140 mm Tipping angle approx.: 50° degrees Dropside height: 500 mm 1st attachment height: 500 mm Permitted maximum speed: 30 km/h Multi-chamber tail light Multipoint Hard chrome-plated hydraulic cylinder 105 mm Tires 19.0/45 - 17 AW 18 PR, Bridge support mounted on the frame Preparation for suspension aid COC EU approval document Lighting system

Year of construction: 2023, Condition: new, RT-140.450 Reisch tandem three-way tipper Total weight: 14,000 kg Drawbar load: 2,000 kg Axle load: 12,000 kg Unladen weight: 2,640 Payload: 11,360 kg Bridge size: approx. 4,500 x 2,200/2,300 mm Floor thickness: 4 mm Platform height approx. 1,210 mm Tipping angle approx.: 49° degrees Dropside height: 600 mm 1st attachment height: 600 mm Maximum permissible speed: 40 km/h Type approval: COC EU approval document Sturdy box-shaped frame Height-adjustable towing eye Truck 2-speed gearbox support winch Robust multi-leaf spring Reinforced tandem unit ADR axle, 350 x 90, track 1,800 mm Multi-chamber tail lights -2x license plate light -1 Pair of clearance lights -1 set of side marker lights -7-pin socket at the rear of the vehicle Tipping hydraulics with lift limiting valve and stopcock Hard chrome-plated hydraulic cylinder Ø120 500/50-17 BKT AW 708 14PR tires Kaykybfu Mudguards Bridge support mounted on the frame Central locking, fixed tailgate, Corner stanchions removable Climbing aid on the bulkhead Tensioning chain dropside with continuous walls Chassis painted in Reisch gray RAL 7021 black-grey Side walls painted in Reisch green RAl 6032 signal green Rims painted in silver Preparation for spring aid

Year of construction: 2023, Condition: new, RTD-80.450 Reisch tandem three-way tipper Total weight: 8,000 kg Drawbar load: 1,000 kg Rear axle load: 7,000 kg Unladen weight: 2,280 kg Payload: 5,720 kg Bridge size: approx. 4,500 x 2,200/2,300 mm Floor thickness: 4 mm Platform height approx. 1,145 mm Tilt angle approx.: 50° degrees Dropside height: 500 mm 1st attachment height: 500 mm Maximum permitted speed: 25 km/h Type approval: ABE/data confirmation Sturdy cranked frame side member ADR RM08 overrun hitch with automatic reverse drive Height-adjustable towing eye through flange plate Height-adjustable support wheel with angular gear 4-wheel automatic reverse drive with Handbrake lever on the towing device Robust multi-leaf spring VB Reinforced tandem axle unit ADR axle Multi-chamber tail light "Multipoint" in 12 V -2x license plate light -7-pin socket at the rear of the vehicle Tipper hydraulics with lift limiting valve and stopcock Hard chrome-plated hydraulic cylinder Ø120 15.0/55 - 17 AW 14 PR tires Plastic quarter-shell mudguards Manual trailer coupling -Only as a maneuvering coupling, not permitted on not permitted on public roads! Steel bridge floor in torsion-free, cavity-sealed profile construction Profiled steel drop sides and extensions with scuff plates pressed onto the sides and welded-in reinforcement profiles Side walls and rear wall hinged and hinged with central locking, Fixed end wall, removable corner stanchions Climbing aid on the front wall Hestal locks 664 N Vinyl foam adhesive tape on one side Slider with hand lever in the Rear drop side incl. integrated stop Chassis painted in Reisch gray Bkariolig3I RAL 7021 black-grey Bridge floor painted in Reisch gray RAL 7021 black-grey Drop sides painted in Reisch green RAL 6032 signal green ABE/data confirmation 25 km/h version Preparation for spring aid

Condition: used, branded REISCH three-way tipper Top suspension Towing eye for towing jaw Bii2Inka88 Turntable 2nd axle overrun brake Lighting system

Year of construction: 2023, Condition: new, REDK-79.400 Goltuc Reisch 1-axle three-way tipper Bridge size: approx. 4,000 x 2,080 mm Floor thickness: 4 mm Platform height approx. reference tires): 1,140 mm Tipping angle approx.: 50° degrees Dropside height: 500 mm 1st attachment height: 500 mm Permitted maximum speed: 30 km/h Multi-chamber tail light Multipoint Hard chrome-plated hydraulic cylinder 105 mm Tires 19.0/45 - 17 AW 18 PR, Preparation for suspension aid COC EU approval document

Year of construction: 2023, Condition: new, Equipment: Compressed Air Brake, RUTDK-180.513 Reisch tandem three-way tipper Bridge size (internal dimensions): approx. 5,130 x 2,420 mm Platform height approx. reference tires): 1,030 mm Dropside height: 500 mm Platform height approx. reference tires): 1,030 mm Overall length: 7,250 mm Wheelbase: 1,400 mm Trailer height approx.: 700 - 1,000 mm Stopcock for hydraulics 1 pair of aluminum drive-on ramps, load capacity per pair 9,000 kg, length 3,500 mm, width 350 mm, net weight 63 kg/pc DIN towing eye 50 mm, with crank, infinitely variable height-adjustable Front geared support winch 12 t Support legs at the rear under the loading area Air brake system with ALB 24 V lighting system 5-chamber rectangular truck lights protected mounted with rear fog light, license plate light, triangular rear lights, lane departure warning lights, amber side lights, 2x 7-pin connection plugs plug 2 wheel chocks tires (4x) 435/50 R 19.5 Additional bridge cross member 5.0 Recessed lashing rings, DIN arrangement Climbing aid on the bulkhead Spring aid on the front wall with 2 springs Tool box 750 x 350 mm Bnhnct2Sen3 Body and bridge painted anthracite Rims painted silver Galvanized frame

Year of construction: 2023, Condition: new, RTAS-200.775 PRO Reisch push-off trailer Total length: 10,000 mm Trough size: approx. 7,000/7,750 x 2,370 mm Trough height: 2,100 mm Volume: 40.3 m Truck - 2-speed gear support winch 21-22 t permissible total weight incl. K80 Reinforced 4 leaf parabolic suspension 32 Sbbodnvk2F self-steering axle BPW 410 x 180, track 2250 mm Hydraulically folding underride guard 710/50-R26.5 BKT FL-630 tires Mudguards and warning signs Floor made of 5 mm sheet steel, Side walls 3 mm, front wall 4 mm Grain pusher 500 x 300 with lever Side wall increase by 100 mm due to larger end profile attachment 150 mm

Year of construction: 2022, Condition: used, Equipment: Compressed Air Brake, REISCH tandem three-way tipper for excavator train with standard equipment Total weight: 14,000 kg Drawbar load: 600 kg Axle load (rear): 13,400 kg Unladen weight (basic equipment): 3,580 kg Payload (basic equipment): 10,420 kg Bridge size (interior dimensions): approx. 5,130 x 2,420 mm Platform height approx. reference tires): 1,020 mm Dropside height: 500 mm 1st attachment height: mm Overall length: 7,250 mm Wheelbase: 1,040 mm Trailer height approx.: 750 - 1,150 mm Permitted maximum speed: 105 km/h Toolbox 750 x 350 mm Stopcock for hydraulics 1 pair of aluminum drive-on ramps, load capacity Eetsyqqb7 Load capacity 10,000 kg per pair, Length: 3,500 mm Width: 400 mm Weight: 59 kg/each DIN drawbar eye 40 mm, with crank, infinitely variable height-adjustable Front geared support winch 12 to, Support legs at the rear under the loading area Tandem unit with parabolic suspension and mech. axle compensation Axles with automatic slack adjusters (AGS) Leading manufacturer 2-line air brake system with ALB controller 24 volt lighting system 5-chamber rectangular truck lights Triangular reflectors Rear fog light License plate light Lane departure warning lights Yellow side lights 2 x 7-pin connector plug 2 wheel chocks Tires: 4 x wheel 385/55 R 19.5 Steel bridge floor Additional bridge cross members (4 pieces per side and 6 pieces between longitudinal bridge girders) 5 lashing rings, recessed Spring aid on the end wall side with 2 springs and deflection roller right and left Paint finish: RAL 7016 - anthracite gray Rim: silver Frame: galvanized

Year of construction: 2023, Condition: new, REDK-79.400 Reisch 1-axle three-way tipper Total weight: 7,800 kg Drawbar load: 1,000 kg Axle load: 6,800 kg Unladen weight: 1,780 kg Payload: 6,020 kg Bridge size: approx. 4,000 x 2,080 mm Floor thickness: 4 mm Platform height approx. 1,140 mm Tilt angle approx.: 50° degrees Dropside height: 500 mm 1st attachment height: 500 mm Maximum permitted speed: 30 km/h Type approval: COC EU approval document Sturdy, torsion-free frame made from closed C-profiles ADR RM08 overrun hitch with automatic reverse drive Height-adjustable support wheel 2-wheel automatic reverse drive with handbrake lever on the towing device ADR axle, automatic reverse drive, 350 x 90, Track 1,650 mm, Multi-chamber tail light 12 Volt -2x license plate light -1 Pair of clearance lights -1 set of side marker lights -7-pin socket at the rear of the vehicle Tipping hydraulics with lift limiting valve and stopcock Hard chrome-plated hydraulic cylinder Ø105 Tires 19.0/45-17 AW 18 PR WITHOUT trailer coupling Bridge support mounted on the frame Support aid on the bulkhead Preparation for spring aid Dpfnbl Slider with hand lever Chassis painted in Reisch gray RAL 7021 black-grey Drop sides painted in Reisch green RAL 6032 signal green

Year of construction: 2023, Condition: new, Equipment: Compressed Air Brake, RUTDK-119.513 Reisch tandem three-way tipper Base unit Bridge size (internal dimensions): approx. 5,130 x Bnhmzm0Gdsz 2,420 mm Dropside height: 500 mm Stopcock for hydraulics 1 pair of aluminum ramps Load capacity per pair 8000 kg Length 3,500 mm Width 400 mm DIN towing eye 40 mm, with crank, infinitely variable height adjustable Front geared support winch 12 t Support legs at the rear under the loading area Tandem unit with parabolic suspension and mechanical axle compensation Air brake system with ALB 24 V system with 5-chamber truck rectangular lights protected mounted 2 wheel chocks with bracket tires (4-ply) 385/55 R 19.5 Additional bridge cross members 5 recessed lashing rings, arranged according to DIN Climbing aid on the bulkhead Spring aid on the end wall with 2 springs Tool box 750 x 350 mm Body and bridge in municipal orange Rims painted silver Galvanized frame

Overall weight: 32,000 kg, Axe configuration: 2 axles, First registration: 02/2007, Suspension: other, Color: grey, Condition: used, Gearing type: mechanical, , 2 axles dumper/rear tipper permissible total weight 32,000 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION ARE DECISIVE, THE PRICE TAKES SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller on the number. //*EXCHANGE, DEPOSIT OR RENTAL OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You can find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Djkej2

Year of construction: 2023, Condition: new, RTAS-200.675 ECO Reisch push-off trailer Total length: 9,000 mm Body size: approx. 6,000/6,750 x 2,370 mm Skip height: 2,100 mm Volume: 35.1 m Truck - 2-speed gear support winch 21 t permissible total weight incl. K80 Reinforced 4 leaf parabolic suspension 32 tons power unit self-steering axle BPW 410 x 120, track 2150 mm Hydraulically folding underride guard 710/50-R26.5 BKT FL-630 tires Mudguards and warning signs Floor made of 5 mm sheet steel, Doxbvl Side walls 3 mm, front wall 4 mm Grain pusher 500 x 300 with lever Side wall increase by 100 mm due to larger end profile Attachment 150 mm high for slide

Year of construction: 2023, Condition: new, RTD-80.450 Reisch tandem three-way tipper with standard equipment Bridge size: approx. 4,500 x 2,200/2,300 mm Floor thickness: 4 mm Platform height approx. reference tires): 1,145 mm Tilt angle approx.: 50° degrees Dropside height: 500 mm C9077K3 1st attachment height: 500 mm Multipoint multi-chamber tail light Tires 15.0/55 - 17 AW 14 PR Mudguards Bridge support mounted on the frame ABE/data confirmation Pre-tensioning for spring aid