Used Unsinn Car Trailers for sale (64)

Condition: used, Year of construction: 2022, Payload: 2,067 kg Gross vehicle weight: 533 kg Front tire condition: 95% Rear tire condition: 95% Front tires: - Rjdpfx Abjutwalszep Rear tires: - Please contact PFEIFER GROUP for further information.

Condition: new, empty load weight: 630 kg, maximum load weight: 1,970 kg, overall weight: 2,600 kg, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 300 mm, tire size: 165r13, Product information "UNSINN WEB-DK3017-26-13-E 2600kg 306x175x85cm Mesh Extension Three-Way Tipper" Three-way tipper with corrugated mesh extension from trailer manufacturer Unsinn, model WEB-DK3017-26-13-E. Made in Germany! The high-loader, three-way tipper, is equipped with electric hydraulics for tipping. The foldable and removable side walls make the car trailer easy to load from the side and rear with a forklift, wheel loader, or by hand. A welded and hot-dip galvanized steel frame makes the tipping trailer very stable. The tipper is equipped with a mesh extension, folding and removable side walls, a solid steel floor, electro-hydraulics, an automatic support wheel, lashing eyes, a welded, hot-dip galvanized frame, a rail shaft, and a very sturdy V-shaped drawbar. Tipper accessories such as a side wall extension, tarpaulin and frame, flat tarpaulin, net, box, loading rails, and supports are available for an additional charge. ----- You can also get: · Financing · Leasing (businesses only) · Consulting · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repairs · TÜV inspection for car trailers Rjdpfx Abog Un Dzjzjp Ahrens Car Trailer Center, Moordeicher Landstraße 37, 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Condition: new, empty load weight: 560 kg, maximum load weight: 2,040 kg, overall weight: 2,600 kg, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, tire size: 165r13, Product information "UNSINN WEB-HK2715-26-13 2600kg 276x150x30cm rear tipper with PUMPless" Rear tipper from the manufacturer Unsinn. Made in Germany! The WEB-HK2715-26-13 high-loader rear tipper can be easily loaded from the side and rear with a forklift or by hand thanks to the foldable and removable aluminum side walls. The load is tipped back out using manual hydraulics. A welded subframe makes the tipping trailer very stable. The car trailer is equipped with foldable and removable side walls, a solid steel floor, PUMPless hydraulics for cordless screwdrivers, an automatic support wheel, lashing eyes, a welded, hot-dip galvanized frame, and a very stable V-drawbar. Rjdpfx Abeqv Ec Hjzep Trailer accessories such as a leaf grid attachment, side wall attachment, tarpaulin and frame, tarpaulin, net and supports are also available for an additional charge.

Condition: new, empty load weight: 380 kg, maximum load weight: 920 kg, overall weight: 1,300 kg, loading space length: 2,550 mm, loading space width: 1,280 mm, loading space height: 1,530 mm, tire size: 165R13, Plywood box body WEB40 from trailer manufacturer Unsinn. Rodpfxoq Nzr Ds Abzsp The car trailer with plywood body made in Germany has white walls and a transparent roof. The box trailer is equipped with a lockable single-leaf door with espagnolette lock, support wheel, light roof, tubular drawbar and plastic-coated white walls. Accessories for this car trailer include ramps, lashing rails, rear supports, lashing eyes, tool box, anti-theft device, lashing straps and much more.

Condition: new, empty load weight: 390 kg, maximum load weight: 910 kg, overall weight: 1,300 kg, loading space length: 2,300 mm, loading space width: 1,500 mm, loading space height: 300 mm, Product information "UNSINN WEB-HK2315-13-10 1300kg 230x150x30cm rear tipper with PUMPless" Rjdpfoq Rvcqox Abzsp Rear tipper from trailer manufacturer Unsinn. Made in Germany! The WEBHK2315-13-10 single-axle high-loader is a rear tipper. Easy to load thanks to its foldable and removable aluminum side walls. The load can then be tipped manually using the hydraulic system. A welded base frame makes the tipping trailer very stable. This car trailer is equipped with foldable and removable side walls, a solid steel floor, PUMPless hydraulics for cordless screwdrivers, a support wheel, lashing eyes, a welded, hot-dip galvanized steel frame, and a sturdy V-drawbar. Accessories such as a leaf grid attachment, side wall attachment, tarpaulin and frame, tarpaulin, load securing net and supports are also available for an additional charge.

Condition: new, empty load weight: 230 kg, maximum load weight: 520 kg, overall weight: 750 kg, loading space length: 2,600 mm, loading space width: 1,550 mm, loading space height: 150 mm, tire size: 175/70R13, Drop-down trailer single-axle unbraked Unsinn AS826-13-1550. Rsdeq Nm A Nopfx Abzsp The platform of this car trailer is tilted so that motorcycles, quad bikes, ATVs, sweepers and similar vehicles can be easily loaded. The tiltable car trailer is equipped with a perforated railing, support wheel, lashing eye and tubular drawbar. Accessories include a motorcycle stand rail, motorcycle rocker, tarpaulin and frame, side wall attachments, lashing eyes, motorcycle lashing strap, tool box, anti-theft device and lashing straps.

Condition: new, functionality: fully functional, empty load weight: 365 kg, maximum load weight: 935 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,550 mm, loading space width: 1,280 mm, loading space height: 1,530 mm, tire size: 165R13, color: white, Year of construction: 2024, Single-axle plywood box trailer with door Trailer loading height approx. 550 mm Frame: - Unique, torsion-resistant aluminum chassis for safe driving characteristics Support wheel: - Drawbar support wheel 48 mm mounted, for safe parking of the loaded trailer trailer Body: - Plywood elements with PP surface, similar to white RAL 9010 - Transparent light roof for good visibility when loading - Rear frame and frame profiles made of special anodized aluminium profiles for Rsdpfeuzvmnjx Abzjp aesthetically pleasing - Rear door with aluminum hinges. - Loading area made of multi-glued 18 mm screen printing plate, slip-resistant and waterproof Electrics: - Lighting with 13-pin plug and reversing light

Condition: like new (used), functionality: fully functional, empty load weight: 835 kg, maximum load weight: 2,165 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 350 mm, tire size: 185R14C, Year of construction: 2024, UDK 3017-30-14 with mesh extension 1 day = €55 2 days = €50 per day 3 days = €45 per day 4 days = €40 per day Prices include VAT. With steel floor - Spinlock, hook fasteners, and electric hydraulics with emergency pump - Steel-aluminum side wall 350mm / ramp shaft including folding license plate holder Three-way tipper Max. Total weight 3000 kg Payload approx. 2210 kg Box/trunk dimensions (interior L/W/H): 3060 x 1750 x 350 mm Tires 185 R14C 8PR Number of axles: 2 Trailer loading height approx. 770 mm Frame Torsion-resistant longitudinal member chassis (longitudinal members continuous from the overrun device to the light bracket) for excellent directional stability Closed, fully welded, and hot-dip galvanized steel frame profile for optimal stability Integrated ramp shaft with tensioning device and foldable license plate holder for safe and elegant storage of the loading ramps under the loading area With maintenance support to secure the tilted deck during maintenance work Joint wheel Reinforced automatic jockey wheel mounted on a separate crossbeam with a load capacity of 500 kg for safe parking of the trailer Maneuvering handle with Practical tensioning strap reel for easy handling Loading area & bridge Solid steel floor across the entire width of the vehicle Bridge with a maximum number of crossbeams for particularly high point loads Side walls Anodized, fully foldable and removable aluminum side walls Galvanized angle lever locks with spring lock Rear side wall with steel planking, foldable including anti-slip protection for loading ramps Four plug-in steel corner stanchions for heavy loads as well as easy loading and attachment of accessories Load securing Patented Spinlock load securing system for greater flexibility and efficiency in load securing, DEKRA certified Lashing pins on and under the loading area, each with a load capacity of up to 1500 daN (kg) and rotatable 360° Pot magnet with key ring for removing the lashing pins when the side wall is open Hydraulics Rjdpfxstq Hmwo Abzep Protected electric hydraulic system with battery and powerful charger for a long service life Pumpless emergency pump Includes a matching socket wrench for convenient and easy tilting with a cordless screwdriver when the battery is low. Electrics Lighting with a 13-pin connector and protected rear lights for long and safe operation. Function of the electrical components. Cable routing in the longitudinal beams of the chassis —> protection from external influences, therefore particularly durable.

Condition: new, functionality: fully functional, machine/vehicle number: 208663, empty load weight: 1,190 kg, maximum load weight: 2,310 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,660 mm, loading space width: 2,040 mm, loading space height: 400 mm, tire size: 185R14C, color: silver, Year of construction: 2024, Equipment: tail-lift, SPECIAL PRICE until June 5, 2025!!! 650 mm mesh extension with integrated pendulum bearing in the corner stanchion, 4-sided, ILxIB 3660x2040 mm, type UH, UDK Aluminum loading ramps, 2560x300 mm, load capacity 2800 kg/pair, and one pair with sturdy pivoting parking supports for 13/14 inch tires UNSINN plastic tool box, splash-proof, mounted under the loading area, on the right in the direction of travel, Inner dimensions LxWxH 430x180x188 mm Frame -Torsion-resistant longitudinal beam chassis (longitudinal beams continuous from the overrun device to the light bracket) for high directional stability -Closed, fully welded, and hot-dip galvanized steel frame profile for optimal stability -Integrated ramp shaft with clamping device and foldable license plate holder for safe and elegant storage of the loading ramps under the Loading Area -With maintenance support for securing the tilted deck during maintenance work Joint Wheel -Reinforced automatic jockey wheel mounted on a separate crossbeam with a load capacity of 500 kg for safe parking of the trailer -Maneuvering handle with practical tensioning strap retractor for easy handling Rjdpfermlzhsx Abzop Loading Area & Deck -Solid steel floor extending across the entire width of the vehicle -Bridge with the maximum number of crossbeams for particularly high point loads Load Securing -Patented Spinlock load securing system for greater flexibility and efficiency in load securing, DEKRA-certified -Lashing pins recessed into the steel floor, symmetrically distributed -Lashing pins on and under the loading area, each capable of withstanding loads of up to 1500 daN (kg) and rotatable 360° -Pot magnet with key ring for removing the lashing pins when the side panel is open Side Panels -Solid steel side panels (400 mm), foldable and removable on four sides, with galvanized angle lever locks and an integrated net and tarpaulin strip, powder-coated in black-gray (RAL 7021). -Four plug-in steel corner posts for heavy loads and easy loading and attachment of accessories. Hydraulics -Protected electric hydraulic system with battery and powerful charger for a long service life. -Pumpless emergency pump including a matching socket for convenient and easy tipping with a cordless screwdriver when the battery is low. Electrics -Lighting with a 13-pin connector and protected rear lights for long and safe operation of the electrical components. -Cable routing in the longitudinal beams of the chassis —> protection from external influences, therefore particularly durable.

Condition: new, functionality: fully functional, empty load weight: 835 kg, maximum load weight: 2,165 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 350 mm, tire size: 185R14C, Year of construction: 2025, Three-way tipper UDK 3017-30-14 Spinlock®, 350 mm drop sides with corner lever locks, rear drop side with steel paneling, electric hydraulics with emergency "Pumpless" pump, integrated ramp compartment incl. foldable license plate holder, maintenance support. Internal body dimensions: 3,060 × 1,750 × 350 mm Loading height: 750 mm Payload: 2,160 kg Rjdpfxoxc Eh Ao Abzjp Tyres: 185 R14C 8PR Chassis Torsion-resistant longitudinal chassis frame (continuous from the coupling device to the rear lamp bracket) for superior tracking stability. Enclosed, fully welded and hot-dip galvanized steel frame profile for optimum durability. Integrated ramp compartment with tensioning device and foldable license plate holder for secure and elegant storage of ramps under the loading platform. Supplied with maintenance support to secure the tilted bed during servicing. Jockey Wheel Reinforced automatic jockey wheel, mounted on a separate crossmember, with a load capacity of 500 kg for safe parking of the trailer. Manoeuvring handle with practical ratchet strap winder for easy handling. Load Platform & Bed Continuous heavy-duty steel floor across the full vehicle width. Bed with maximum number of crossmembers for superior point load capacity. Load Securing Patented Spinlock load securing system for greater flexibility and efficiency, DEKRA certified. 10 recessed lashing pins symmetrically distributed in the steel floor. Lashing pins above and below the platform, each loadable up to 1,500 daN (kg) and rotatable 360°. Pot magnet with key fob for easy removal of lashing pins when the drop side is open. Drop Sides Anodised, fully foldable and removable aluminium drop sides. Galvanized corner lever fasteners with spring-loaded safety catch. Rear drop side with steel paneling, foldable, including slip protection for ramps. 4 plug-in steel corner stanchions for high load capacity and easy loading & mounting of accessories. Hydraulics Protected mounting of the electric hydraulics with battery and high-performance charger for long service life. Pumpless emergency pump incl. matching socket wrench insert for convenient and simple tipping operation using a cordless screwdriver in case of low battery.

Condition: new, functionality: fully functional, machine/vehicle number: 209942, empty load weight: 860 kg, maximum load weight: 1,740 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,660 mm, loading space width: 1,660 mm, loading space height: 1,920 mm, tire size: 185/65R14, color: silver, Year of construction: 2024, Equipment: cooling unit, Rent a trailer from Unsinn UKT 6C 3617-26-14! 1 day = €95 2 days = €90 per day 3 days = €85 per day 4 days = €70 per day Prices include VAT. Rsdpfx Abstk Hx Dezop Frame Torsion-resistant aluminum chassis for excellent directional stability Joint wheel Reinforced automatic jockey wheel mounted on a separate crossbeam with a load capacity of 900 kg for safe parking of the trailer 4 sturdy crank supports (including crank) mounted on solid hot-dip galvanized crossbeams, for a weight of up to 6000 kg Construction One-piece sandwich panels (= without glued joints) with a wall thickness of 45 mm for optimal stability and insulation Inner and outer layers made of galvanized and powder-coated sheet steel for robust use Elegant exterior color in silver (RAL 9006), interior color in white (RAL 9010) Rear frame and edging profiles made of anodized Aluminum profiles Double-leaf rear door with rubber seal and aluminum hinges Cooling compartment lock with two keys and stainless steel door stop Two maneuvering handles mounted on the bulkhead profile Galvanized skirting board on three sides (height: 200 mm) Refrigeration unit Renowned Arktik 1600 N refrigeration unit with emergency hotline 1600 watts of cooling capacity at a cold compartment temperature of +6°C and an ambient temperature of 30°C Temperature control range from +2°C to +10°C 230 V 50 Hz power supply 750 m³/hour air flow rate Evaporator Fully encapsulated unit with an attractive front cover made of impact-resistant ABS plastic, mounted on the top of the front panel Operates with environmentally friendly CFC-free refrigerant Electronic automatic defrosting of the evaporator

Condition: new, machine/vehicle number: 523058, empty load weight: 625 kg, maximum load weight: 1,975 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 700 mm, tire size: 165 R13, Year of construction: 2022, Rent a WEB32 E 2600kg high-loader rear tipper! 1 day = €45 2 days = €40 per day 3 days = €35 per day 4 days = €30 per day Prices include VAT. Electro-hydraulic system without hand pump Frame: · Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics · Hollow-section construction, welded and fully hot-dip galvanized Joint wheel: · Reinforced, automatic jockey wheel for safe parking of the loaded trailer. Load capacity: 500 kg Side walls: · Hollow aluminum profile, anodized, foldable on four sides, removable, with recessed locks · 4 plug-in steel corner posts for heavy loads Loading area: · Steel floor with 6 recessed lashing rings, each loadable up to 600 kg daN Electrics/Hydraulics: · Lighting with 13-pin connector and reversing light Rjdpfxstk H H Io Abzep · Electrohydraulic system in tank with battery and charger, without hand pump

Condition: new, functionality: fully functional, empty load weight: 340 kg, maximum load weight: 1,060 kg, overall weight: 1,400 kg, axle configuration: 1 axle, loading space length: 2,550 mm, loading space width: 1,420 mm, loading space height: 1,530 mm, tire size: 185/65R14, color: white, Unsinn UKU 251415-14-14 (ULK 1325-14-1420N) Unique panel box series from Unsinn with high payload - NEW VEHICLE - Redpewx N I Ujfx Abzop NEW: LED interior light works anywhere, with motion sensor Lashing rod rails on the sides Unique Panel walls: sandwich design with steel on the inside, GRP on the outside – ultra-light and stable Recessed lashing rings in interior side rails, adjustable and expandable Shock absorbers, 100 km/h approval Also available with rear ramp door (surcharge - on request). Tech. data: Gross vehicle weight: 1300 kg Unladen weight: 345 kg Payload: 955 kg Braked, single axle Box internal dimensions: 255 x 142 x 153 cm Overall dimensions: 393 x 192 x 211 cm Tyres: 185/65R14 new tyres Loading height approx. 55 cm Construction and Equipment: Axle and drawbar galvanised, maintenance-free rubber spring axle Overrun brake with reversing mechanism and AL-KO handbrake Very torsion-resistant aluminium chassis with 2 additional cross members for safe driving characteristics 18mm phenolic resin-coated plywood floor, continuous, non-slip, waterproof Walls made from lightweight sandwich panels Inside: powder-coated steel (for stability) Outside: GRP, white RAL 9016, very suitable for wrapping/branding Translucent roof Perfect load securing: sliding rails on each side of the loading floor with 8 integrated lashing hooks, freely adjustable and foldable Lashing rod rail at 900 mm height on side walls Lighting bar with protected, multi-function lamps Double-wing rear door, fitted with side wall holder, lockable, with rubber seal Box is water-resistant Stainless steel rotary bar lock, aluminium hinges Automatic jockey wheel, 500 kg load capacity for safe stationary support under load Easy installation of attachments thanks to system profile rail Rear carrier with protected multi-function lights Electrics: 12V, 13-pin plug, reversing light NEW: LED interior light with magnetic holder, attaches anywhere inside, with motion sensor Optional extras at additional cost: - Rear support legs - Additional system brackets - Load bars - General load securing accessories - Anti-theft devices ! Many more trailers at >>> trelex.de ! * Financing and trade-in available! * Huge selection: Over 300 trailers always in stock, visit us! * Expert and fair advice, fast processing. * Any questions? Just call! ATTENTION: No immediate pickup without prior order possible!

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, Vehicle Data – Certificate of Conformity (GTP 35) Manufacturer: Unsinn Fahrzeugtechnik GmbH Type: GTP 35 Variant: 3.V. Version: E.T.M.K.3.R.1 Trade designation: UDK 3030-14-1750 Vehicle category: O2 Vehicle Identification Number (VIN): WUF2H5800S0217734 Date of manufacture: 07.03.2025 Type approval location: e12007/4601164*04 Approved speed: 140 km/h ⸻ Dimensions • Axles: 2 / 4 • Wheelbase: 3292 mm • Axle spacing: • 1st: 2572 mm • 2nd: 720 mm • Length: 4530 mm • Width: 1930 mm • Height: 1100 mm • Distance from center of coupling to rear: 4492 mm • Cargo area length: 3060 mm • Rear overhang: 1200 mm ⸻ Weights • Unladen weight (ready-to-drive): 489 kg • Axle 1: 232 kg • Axle 2: 232 kg • Technically permissible gross weight: 3000 kg • Axle 1: 1500 kg • Axle 2: 1500 kg • Axle group 1: 3000 kg • Permissible nose weight (techn.): 100 kg ⸻ Tyres and Rims • Wheel/tyre combination (e.g., standard tyres): 185R14C 104N on 5.5Jx14 ET30 • Permissible combinations according to notes: Redpfewywyzex Abzep 195R14C, 185R14C, 185/60R12C, 195/60R12C, 195/50R13C – with various rim sizes (e.g., 5.5Jx14, 6Jx14, 5.5Jx13, etc.) Offset (ET): 25–35 mm ⸻ Towing Device • Approval number: E1 55R-011594 ext.02 • Specifications: • D-value: 26.9 kN • Nose weight (S): 325 kg ⸻ Brakes, Body, Equipment • Brake: Mechanical • Body code: DC10 • TPMS (tyre pressure monitoring system): No • Shock absorbers required for 100 km/h approval • Not certified according to UN ECE R 155/156 - - - All information without guarantee - - - Illustrations may differ - - -