Used Kässbohrer Box Trailers for sale (131)

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production run. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis Njdpjzhhmfjfx Akcecw ? Equipped with a hydraulic PALFINGER PK 23002 SH E Power Link Plus loading crane ? Suitable for assembly, lifting, and transport work in difficult terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Can turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60% ? Side slope up to 40% ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Ideal for work off paved roads CAB ? Safety cab with ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Endless slewing ring ? Hydraulic six-stage extension boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning thanks to sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection system ? HPSC stability monitoring system ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Specialized forestry work ? Work in peatlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most challenging conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road capability with powerful crane technology. Due to its extremely low ground pressure, high payload, and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machines.

Condition: used, empty load weight: 6,450 kg, maximum load weight: 31,550 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 04/2018, loading space volume: 24 m³, suspension: air, tire size: -, Year of construction: 2018, Equipment: ABS, ref: VO26-2103 SYLTRAILER FOR SALE? Kassbohrer 24 m³ Tipper Semi-Trailer? 3 Axles? 2018 - General Information Make / Model: Kassbohrer DLTIL1SOR123 Type: Rear Tipper Semi-Trailer Year: 2018 Color: Red Chassis Number: WKVDAC6030008 - Tipper Body Features Capacity: 24 m³ - Structure: 8 mm HARDOX steel floor 7 mm steel side walls - Lifting System: Reinforced hydraulic cylinder for heavy loads - Rear Door: Hydraulic tailgate with automatic release - Axle Configuration Configuration: 3 BPW drum brake axles, including 1 liftable axle - Weights & Capacities Unladen weight: 6,450 kg GVWR: 38,000 kg Tipper body capacity: 24 m³ - Equipment Reinforced 8 mm steel floor 7 mm steel side walls Automatic release tailgate Hydraulic door Reinforced hydraulic cylinder Reinforced Kassbohrer chassis New Cramaro dome cover Front inspection walkway Liftable axle 3 BPW drum brake axles ABS / EBS braking system - General Condition Semi-trailer in very good overall condition. New Cramaro cover Robust structure Reinforced cylinder - Highlights Kassbohrer 2018 24 m³ Tipper body 8 mm steel floor 7 mm side walls Reinforced hydraulic cylinder Automatic release tailgate New Cramaro dome cover 3 BPW drum brake axles 1 liftable axle 38 T GVWR Low unladen weight: 6,450 kg ---- Nodpfxsyt Sdas Akcjcw Price: Contact us Door: Hydraulic Delivery time (in days): 1 ABS Serial number: WKVDAC6030008

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production run. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER PK 23002 SH E Power Link Plus loading crane ? Suitable for assembly, lifting, and transport work in difficult terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine Njdpfx Aozgzavskcecw ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Can turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60% ? Side slope up to 40% ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Ideal for work off paved roads CAB ? Safety cab with ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Endless slewing ring ? Hydraulic six-stage extension boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning thanks to sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection system ? HPSC stability monitoring system ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Specialized forestry work ? Work in peatlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most challenging conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road capability with powerful crane technology. Due to its extremely low ground pressure, high payload, and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machines.

Condition: used, empty load weight: 5,490 kg, maximum load weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2025, suspension: air, tire condition: 40 %, load capacity: 33,510 kg, • ADR compliant • Multiple configurations: 2x20, 40’, 45’ • 1st and 3rd axles can be raised • Pneumatic unlocking • Pneumatic rear extension • Odometer • PVC toolbox Nsdpfszf Rqhox Akcecw • Spare wheel holder

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2026, loading space length: 20,440 mm, loading space width: 2,540 mm, loading space height: 2,830 mm, total length: 20,440 mm, total width: 2,540 mm, total height: 2,830 mm, suspension: air, tire size: 385/65-R22.5, color: red, Year of construction: 2026, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Air suspension - Disc brakes = Notes = New and unused Kässbohrer flatbed semi-trailer with ABS/EBS. BPW axles with sliding brake cylinders, extendable to 6.90 m, 3rd axle = steering axle (trailing axle), hardwood floor, 11 lashing points per side, 10 stake pockets per side, lashing points in the longitudinal beams, 1 toolbox, steps on the right, unladen weight: 9,350 kg, permissible total weight: 45,000 kg, tires: 385/65-R22.5 (L: 16/16/16 mm; H: 16/16/16 mm), Dutch registration with a valid main inspection until 04/29/2027, year of manufacture: 08/2023 = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW DISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; tire tread depth left: 100%; tire tread depth right: 100% Rear axle 2: Max. axle load: 9000 kg; tire tread depth left: 100%; tire tread depth right: 100% Rear axle 3: Max. axle load: 9000 kg; steering; tire tread depth left: 100%; tire tread depth right: 100% Weights Unladen weight: 9,350 kg Payload: 35,650 kg GVW: 45,000 kg Functional Body brand: Kässbohrer LB3E Extendable body: Yes Maintenance, History and Condition APK (Technical Main Inspection): valid until 04/2027 Technical condition: very good Njdpfx Aszdiriokcecw Optical condition: very good Identification License plate: OX-77-GJ Further information Please contact Arne Honingh for further information.

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,800 kg, color: blue, empty load weight: 1,800 kg, Year of construction: 2010, Beach cleaning trailer: Nedsvnt N Aopfx Akcecw - Kässbohrer - BeachTech 2000 - Year of manufacture 2010 - PTO drive (540 rpm) - Working width 185 cm - Feeler wheels - 543 cm x 230 cm x 210 cm - Empty weight: 1,800 kg; permissible gross weight: 2,800 kg - Area performance: 22,200 m³/h - 30 cm max. working depth - 1.5 m³ collection container can be tilted backwards - Rake / sieve - Smoother - Preparation for irrigation - Working speed 12 km/h - Required tractor: 70 HP Receive all newly listed vehicles by email - sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,800 kg, color: blue, operation weight: 1,800 kg, empty load weight: 1,800 kg, Year of construction: 2003, Beach cleaning trailer: Ncjdpfx Aovnmg Uokcjw - Kässbohrer - BeachTech STR 2000 - Year of manufacture 2003 - PTO drive (540 rpm) - Working width 185 cm - Feeler wheels - 543 cm x 230 cm x 210 cm - Empty weight: 1,800 kg; permissible gross weight: 2,800 kg - Area performance: 22,200 m³/h - 30 cm max. working depth - 1.5 m³ collection container can be tilted backwards - Rake / sieve - Smoother - Working speed 12 km/h - Required tractor: 70 HP Receive all newly listed vehicles by email - sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, maximum load weight: 30,950 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2024, total width: 2,550 mm, total height: 3,570 mm, Equipment: ABS, KÄSSBOHRER K.SLS 3 / ON - 18/30 LOW LOADER - GENERAL ? Brand new Kässbohrer low loader with hydraulic ramps ? Type K.SLS 3 / ON - 18/30 ? Air suspension ? Tire size 245/70 R17.5 ? Tare weight approx. 11,050 kg DIMENSIONS ? Overall length 13,190 mm ? Platform length 9,240 mm ? Platform height 875 mm ? Overall width 2,550 mm ? With side extensions up to 3,150 mm ? Gooseneck length 3,950 mm WEIGHTS ? Permissible gross vehicle weight 48,000 kg at 80 km/h ? Permissible gross vehicle weight 52,800 kg at 60 km/h ? Total axle load 30,000 kg AXLES AND CHASSIS ? 3 SAF axles ? Air suspension ? WABCO EBS 4S/3M ? ABS + RSS ? WABCO SmartBoard RAMPS AND LOADING AREA ? Hydraulically folding 40-ton ramps ? Ramp length 2,750 mm ? Ramp width 850 mm ? Hydraulic sliding system ? 45 mm hardwood floor ? Diamond plate over the wheel arches CARGO SECUREMENT ? Several lashing points with 8,000 daN and 13,400 daN ? 7 pairs of stake pockets with stakes ? Container locking for 1 x 20-foot container ? Front bulkhead 450 mm ? Side and rear walls made of aluminum BODY AND CHASSIS ? High-strength S700 MC steel ? Partially metallized (Zn/Al 85/15) ? Reinforced corrosion protection ? Rear angle 10° ? 2" kingpin ? Mechanical support legs at the front ? 45-ton support at the rear EQUIPMENT ? 2 toolboxes ? Rotating beacon ? LED lighting ? Rear work lights ? Wheel chocks ? Extensions 9 x 2 (up to +300 mm) ? Stake box Ncedpfxozdl Skj Akcow ? Reflective strips on the side and rear * 8.2 t winch mounted in a storage box in front of the front bulkhead PAINTING ? RAL 3020 Traffic red Further information available upon request.

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production year. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane, PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting and transport work in difficult terrain ? Can be used on peatlands, forest paths, tracks, mountainous regions and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot OFF-ROAD CAPABILITIES ? Gradient capability up to 60% ? Lateral inclination up to 40% ? Wade depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Optimal for work away from paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen operating terminal ? Rear view camera Njdpfozdl R Tox Akcecw ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic knuckle boom loading crane ? Continuous slewing system ? Hydraulic six-stage boom extension Performance data ? Lifting moment 21.5 mt (215 kNm) ? Maximum lifting capacity approx. 6,200 kg ? Maximum hydraulic reach approx. 17.10 m ? Lifting capacity at maximum outreach approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pylon construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Forestry special work ? Work in moorlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-access terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road capability ? Safe operation even under the most difficult conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators and specialist civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with a PALFINGER PK 23002 SH E Power Link Plus offers maximum off-road capability combined with powerful crane technology. Thanks to the extremely low ground pressure, high payload and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: used, mileage: 300 km, power: 231 kW (314.07 HP), first registration: 04/2026, fuel type: diesel, overall weight: 30,000 kg, gearing type: automatic, Year of construction: 2026, Equipment: air conditioning, all wheel drive, crane, TECHNICAL CONSTRUCTION DESCRIPTION KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production year. Inspection/Initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in difficult terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting, and transport work in rough terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot TERRAIN CAPABILITIES ? Gradient climb: up to 60% ? Side slope: up to 40% ? Wading depth: up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive areas ? Ideal for work off paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control terminal ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Continuous slewing system ? Hydraulic six-section boom Performance data ? Lifting moment: 21.5 mt (215 kNm) Ncedozdl Sdjpfx Akcsw ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outrigger ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Special forestry work ? Work in moorlands and nature reserves ? Disaster relief and rescue operations ? Assembly and lifting work in hard-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most difficult conditions ? Economical alternative to mobile cranes in rough terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the PALFINGER PK 23002 SH E Power Link Plus mounted on it combines maximum off-road performance with powerful crane technology. Due to the extremely low ground pressure, the high payload, and the reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: used, mileage: 300 km, power: 231 kW (314.07 HP), first registration: 04/2026, fuel type: diesel, overall weight: 30,000 kg, gearing type: automatic, total length: 8,228 mm, total width: 3,077 mm, total height: 3,375 mm, Year of construction: 2026, Equipment: air conditioning, crane, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production period. Acceptance/initial registration is from 2026. Nodpfxjzdl R He Akcscw GENERAL DESIGN ? High-performance tracked vehicle for professional use in difficult terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting and transport work in rough terrain ? Can be used on moorlands, forest paths, tracks, mountainous regions and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60 % ? Side slope up to 40 % ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive areas ? Optimal for work away from paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Reversing camera ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic knuckle boom loading crane ? Continuous slewing ring ? Hydraulic six-section boom Performance data ? Lifting moment 21.5 mt (215 kNm) ? Maximum lifting capacity approx. 6,200 kg ? Maximum hydraulic reach approx. 17.10 m ? Lifting capacity at maximum outreach approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outrigger system ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Forestry operations ? Work in moorlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in hard-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload combined with excellent off-road performance ? Safe operation even under the most difficult conditions ? Economical alternative to mobile cranes in rough terrain ? High flexibility for energy suppliers, network operators and specialist civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road performance with powerful crane technology. Thanks to the extremely low ground pressure, high payload and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, total length: 13,800 mm, total width: 2,750 mm, total height: 3,200 mm, suspension: air, tire size: 245/70 R17.5, color: other, Year of construction: 2019, Equipment: ABS, = Additional options and accessories = - Lift Axle - Steering Axle = Remarks = Chassis Kingpin / fifth wheel diameter: 2 inch Height of coupling pin / drawbar: 120 cm Drum brake: ✓ Special Transport Nodpfozc Eiuex Akcecw 2-piece ramps: ✓ Hydraulic ramps: ✓ Length of loading floor: 920 cm ( 1420 cm extended) Lowbed trailer: ✓ Max width: 325 cm Max. length: 1420 cm Expandable: ✓ Extendable: ✓ NON-EU VEHICLE, REQUIRES CUSTOMS CLEARANCE // 5-axle extendible semi- lowbed trailer, Gross weight 84000 kg, Year of construction 2019, Load bed lenght 920 cm, Max load bed lenght when extended 1420 cm, Max load bed width with outriggers 325 cm, Load bed height 90 cm, Goose neck lenght 410 cm, Hudraulic ramps, Air suspension, 2 lift axles, 2 steering axles, BPW Eco Plus axles, Drum brakes, ABS, Passive steering, Shipment dimensions 1380x275x330 cm = More information = Axle configuration Tyre size: 245/70 R17.5 Make axles: Bpwecoplus Brakes: drum brakes Suspension: air suspension Front axle 1: Double wheels; Lift axle; Tyre profile left outer: 45%; Tyre profile right outer: 45% Front axle 2: Double wheels; Lift axle; Tyre profile left outer: 30%; Tyre profile right outer: 55% Middle axle: Double wheels; Tyre profile left outer: 25%; Tyre profile right outer: 20% Rear axle 1: Double wheels; Steering; Tyre profile left outer: 45%; Tyre profile right outer: 50% Rear axle 2: Double wheels; Steering; Tyre profile left outer: 35%; Tyre profile right outer: 35% Weights GVW: 84.000 kg Identification Registration number: N2627491 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 6,500 kg, permissible axle load (axle 2): 6,500 kg, first registration: 02/1999, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, wheelbase: 8,600 mm, color: white, Year of construction: 1999, Rear axle 1: Max. axle load: 6,500 kg Rear axle 2: Max. axle load: 6,500 kg Ncsdpfx Akozcwq Recow Unladen weight: 10,500 kg Payload: 10,000 kg GVWR (Gross Vehicle Weight): 20,500 kg Max. number of passenger cars: 6 APK (Technical Inspection): valid until 02/2027

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2019, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 8,790 mm, color: other, Year of construction: 2019, Equipment: ABS, = Additional options and accessories = - BPW Axles - Disc brakes = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile: 40% Njdozcfw Eopfx Akcecw Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.940 kg Carrying capacity: 38.060 kg GVW: 42.000 kg Maintenance APK (MOT): tested until 11/2026 Identification Registration number: OR-37-ZF

Condition: new, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 32 m³, Year of construction: 2025, Equipment: ABS, New vehicle - Available immediately! Purchase, rental, or rent-to-own options available upon agreement. Kässbohrer 32,000 Litre V2A Bitumen Tanker Trailer / Insulated / Also for Rent! ---- * Manufacturer: Kässbohrer * Model: STS 32/1-10/24 - Bitumen Tank Semi-Trailer * First registration: - (New vehicle) * Colour: Chassis RAL 9005 Jet Black, Tank RAL 9006 White Aluminium * Volume: 32,000 litres in 1 compartment * Gross weight: 36,000 kg * Unladen weight (manufacturer): 6,400 kg * Payload: 29,600 kg * Axles: 3x BPW axles / 1st axle liftable / disc brakes * Tyres: 385/65 R22.5 NEW on aluminium rims * Suspension: Air suspension with raise & lower function * EBS Wabco * Tank code: L4BH * Working pressure: 2 bar * Operating temperature: 250°C * Access ladder front right with catwalk on both sides * 1x manhole cover * 4x baffle walls * 1x thermometer * 4" bottom valve at rear with right-hand manual operation * 4" shut-off butterfly valve with mechanical control * 2" side air line (aluminium) * 2" top air line with 2-way slide valve * 3" outlet line at rear * 1/2" sampling tap at rear * Fire extinguisher box right and left rear (without extinguisher) * Full load support legs * Single mudguards * Toolbox rear left * Open hose tray right * Wabco Air Suspension Control Box * LED work lights * Additional LED reversing light New vehicle - Available immediately! Purchase, rental, or rent-to-own options available upon agreement. Note regarding potential errors in this listing: Nedpfx Aksxc A Nwjcecw Despite careful preparation, errors may have occurred in the text or information provided. We accept no liability for mistakes, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or to clarify any further questions.

Condition: new, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 32 m³, Year of construction: 2025, Equipment: ABS, New vehicle – available for purchase, rental, or lease with purchase option upon request! Immediately available! Kässbohrer 32,000 Litre V2A Bitumen Tanker Trailer / Insulated / Also for Rent! ---- * Manufacturer: Kässbohrer * Model: STS 32/1-10/24 – Bitumen Tanker Trailer * First registration: – (New vehicle) * Colour: Chassis RAL 9005 Jet Black, Tank RAL 9005 Jet Black * Capacity: 32,000 litres in 1 compartment * Gross weight: 36,000 kg * Unladen weight (manufacturer's spec): 6,400 kg * Payload: 29,600 kg * Axles: 3x BPW axles / 1st axle liftable / disc brakes Ncedpjxc A N Djfx Akcjw * Tyres: 385/65 R22.5 NEW on aluminium rims * Suspension: Air suspension with raise/lower function * EBS Wabco * Tank code: L4BH * Operating pressure: 2 bar * Operating temperature: 250 degrees Celsius * Access ladder front right, walkways left and right * 1x manhole cover * 4x baffle plates * 1x thermometer * 4" outlet valve at rear, manual actuation right * 4" shut-off valve with mechanical control * 2" side air line, aluminium * 2" top air line with 2-way slide valve * 3" discharge line at rear * 1/2" sample extraction tap rear * Fire extinguisher box rear right and left (without extinguisher) * Full-load supports * Individual mudguards * Toolbox rear left * Open hose tray right * Wabco AirSuspension control box * LED work lights * Additional LED reversing light New vehicle – available for purchase, rental, or lease with purchase option upon request! Immediately available! Note regarding possible errors in the listing: Despite carefully preparing this advert, there may occasionally be errors in the text or details. We accept no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or if you have any further questions.

Condition: used, maximum load weight: 27,650 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 04/2021, next inspection (TÜV): 03/2026, loading space volume: 32 m³, Year of construction: 2021, Equipment: ABS, Stock no. 4912 Insulation slightly damaged, tank in good condition! 32,000 Liter Kässbohrer V2A Bitumen Tank Semi-Trailer / Insulated / Accident Damage / Single Owner - Manufacturer: Kässbohrer - Model: STS 32/1 - 10/24 - First registration: 04/2021 - Capacity: 32,000 liters in 1 compartment - Gross weight: 34,000 kg - Unladen weight (per registration papers): 6,350 kg - Payload: 27,650 kg - Axles: 3 x BPW with 1st axle liftable / disc brakes - Suspension: Air suspension with raise and lower function - Tyres: 385/65 R 22.5 approx. 50% on aluminium rims - Colour: Chassis carmine red, tank body white aluminium - EBS Wabco - Roadworthiness certificate (TÜV): valid until 03/2026 - Tank inspection: valid until 04/2027 - Leak test: valid until 04/2030 - ADR certificate valid until 01/04/2026 - Tank code: L4BH - ADR code: FL / AT - Pressure vessel 2 bar - Operating temperature: up to +250°C - 1 dome cover at the front - Access ladder front right with walkway left and right - 4 baffle walls - 1 x thermometer rear right - DN 100 bottom valve at rear, manual operation right side - DN 100 shut-off valve rear right, with handwheel - 3-inch discharge line at rear - 1/2 inch sampling tap at rear - Fire extinguisher box rear right and left (without extinguishers) - Grounding - Open hose tray on right side - LED reversing lights - LED work lamps - Toolbox rear left - Full load support legs - Individual mudguards - Wabco AirSuspension control box - Single owner German trailer!! German documents!! 1st owner!! Insulation slightly damaged, tank in good condition! Disclaimer regarding potential listing errors: Ncsdpoyawklefx Akcjw Despite careful creation of the listing, errors may occasionally occur in the description or details. We accept no liability for mistakes, changes, or prior sale. All information is without guarantee. Please contact us to verify details or clarify any questions.

Condition: used, maximum load weight: 38,048 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 10/2020, loading space length: 13,190 mm, loading space width: 3,150 mm, loading space height: 890 mm, total width: 2,550 mm, total height: 3,550 mm, Year of construction: 2020, Equipment: ABS, Kaessbohrer LB3E semi low loader with hydraulic ramps First registration BPW Eco Plus axles Lifting axle Drum brakes with ABS and EBS Air suspension Tyres: 245/70 R17.5, 40/45% Gross weight: 48,000 kg, unladen weight: 9,952 kg, payload: 38,048 kg Gooseneck length: 3.95 m Nodpfx Asy Eupwskcscw Low bed length: 9.24 m Width: 2.55 m + 2x30 cm Loading platform height: 89 cm Hydraulic ramps with side shift Rear supports Lashing rings Stake pockets Errors and prior sale excepted

Condition: used, maximum load weight: 43,860 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 01/2020, loading space length: 18,640 mm, loading space width: 3,250 mm, loading space height: 890 mm, total width: 2,750 mm, total height: 355 mm, Year of construction: 2020, Equipment: ABS, Kaessbohrer LB4E Semi Low Loader First registered in 2020 BPW Eco Plus axles 1 lift axle 2 last axles self-steering Drum brakes ABS/EBS Tyres: 245/70 R17.5 34/40% Air suspension Ncodpfsx Ianqjx Akcow Gross weight: 58,000 kg, unladen weight: 14,140 kg, payload: 43,860 kg. Neck length: 3.40 m Low bed length: 9.24 m + 6.00 m extendable Total loading length: 18.60 m Width: 2.75 m + 2x30 cm Loading platform height: 89 cm Hydraulic ramps 2 rear supports Lashing rings 24V powerpack for ramp hydraulics Subject to errors, typos, and prior sale.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2004, next inspection (TÜV): 01/2024, * BPW axles * Disc brakes * 5x dome covers * Folding guardrail * Additional rear supports * Unladen weight: 7,020 kg Njdpfx Akjq A E D Nscecw ----Internal vehicle number: 8512-----Subject to errors and prior sale. WhatsApp support available! If you have any questions about the vehicle or require further information, feel free to contact us easily via WhatsApp. WhatsApp WhatsApp

Condition: used, maximum load weight: 29,580 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 11/2019, total width: 2,550 mm, total height: 3,020 mm, Equipment: ABS, Kässbohrer low-loader semi-trailer with 3 axles and 2 ramps Ncedpfxoy H Tfme Akcew Equipment: + 1st axle is liftable + Last axle is a steering axle + 2x hydraulic 300 mm loading ramps + 2x outriggers + 4 meters extendable + Removable wheel recesses for 3.40 m machines + Axles by BPW + Air suspension + ABS We would also be happy to assist you with financing/leasing options through our partners. All information is subject to change without notice. Errors and prior sale excepted.

Condition: new, maximum load weight: 36,565 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer SPS Mega heavy-duty platform trailer available immediately! Technical data: * Fifth wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Total width: 2,550 mm * Technical total weight [80 km/sa] 45,000 kg * Technical total weight [60 km/h] 46,000 kg * Empty weight: 7,827 kg Ncjdpfx Akerukt Rjcow Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle can be lifted * Wabco braking system * Tires 445/45/R 19.5 Chassis: * Chassis, made of high-quality and high-strength S700 MC steel, in accordance with ISO 1726 * 2 mm Omega profile reinforced 30 mm hardwood floor * 8x2 units of side extensions extendable up to 300 mm * Support winch at the front, foldable supports at the rear Ramp: * Mounts for ramps at the rear of the vehicle * Ramp storage box at the rear Load securing: * Lashing rings * Stake pockets * 6 x 2 pcs. container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. containers) + 2 x 2 pcs. container locks * Front wall made of steel material with a height of 1,500 mm with Code XL certificate Accessories: * 1x stainless steel tool box * Stake box Chassis color: RAL 3020 traffic red We are happy to provide you with further information

Condition: new, maximum load weight: 24,855 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SOK extendable truck/car transporter Immediately available TECHNICAL DATA: * Outer length 13,200 mm * Center distance 8,350 mm * Overall width 2,550 mm * 1,000 mm coupling height * Axle load 24,000 kg * Kingpin capacity 12,000 kg * Unladen weight ±%3 11,145 kg * Total weight 36,000 kg * Vehicle extension 1,800 mm * Bumper extension 1,200 mm CHASSIS: * BPW brand axles, 9,000 kg technical capacity with air suspension and drum brakes * Last axle self-steering * First axle liftable * Wabco brake system * 12-ply 205/65 R17.5 tires CHASSIS: * Made of high-strength steel * Front ramp: 2 3,800 mm long hydraulically folding and hydraulically sliding galvanized ramps (max. 1,000 mm extension angle between 2° and 15°) Load capacity 7 t * Middle ramp: 2 pieces, 1,200 mm long, hydraulically folding, galvanized ramps (angle between 0° and 44°) Load capacity 7 t. * Front axle ramp: 1 piece, 4,000 mm long, hydraulically folding, galvanized ramps (angle between 0° and 29°) Load capacity 7 t. * Loading ramp: 2 aluminium loading ramps measuring 2000 x 400 x 75 mm (L x W x H) with a capacity of 3.5 tons are available for loading the vehicles onto the truck transporter. The ramp angle is 10° with the rear bumper closed and 8° with the bumper extended * Wheel recess in the size of 800 x 460 x 70 * Vehicle extension type 1,800 mm every 300 mm LOAD SECURING: * Lashing eyes are included, 1 x 2 pieces with 8 tons load capacity on the gooseneck, 2 x 2 pieces with 8 tons load capacity on the front ramp and 2 x 2 with 8 tons load capacity on the rear area Ncedpfx Akeumzz Tscjw MISCELLANEOUS: * Tool box made of aluminum 400x300x500 mm * Color of the chassis: RAL 3020 traffic red, galvanized For further information please do not hesitate to contact us

Condition: new, maximum load weight: 35,450 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 12,740 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLA_RJ 3 / 1N ? 18/24 | Low Loader | Extendable | Wheel Wells | Ramps | 3 Axles Low gooseneck height, small tires! 770 mm loading height Manufacturer: Kässbohrer Model: K.SLA_RJ 3 / 1N ? 18 / 24 Vehicle type: Extendable jumbo low-bed trailer with wheel wells Registration country: Germany Year of manufacture: 2026 Color: RAL 3020 Traffic Red ----Technical Data Dimensions* External length: 13,190 mm * Platform length: 9,240 mm * Extension: 3,500 mm * Gooseneck length: 3,950 mm * Platform height: 770 mm * Fifth wheel height: 1,150 mm * Overall width: 2,550 mm + 600 mm side extension * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm * Locking position: 500 mm * Rear swing door: 2,300 mm ----Weights Unladen weight: approx. 12,556 kg * Permissible total weight (80 km/h): 48,000 kg * Permissible total weight (60 km/h): 52,800 kg * Axle load: 24,000 kg * Axle capacity per axle: 8,000 kg * Fifth wheel load capacity: 15,000 kg ----Chassis / Axles 3 BPW axles * Air suspension * 2 fixed front axles * 1 trailing rear axle * Lift axle on 1st axle (load-dependent) * Automatic axle lift control from tractor unit * Air suspension with load gauge * ECAS electronic air suspension system ----Braking System / Electrics WABCO EBS 4S/3M Ncjdpfx Aksyrkpxecsw * ABS * RSS roll stability support * Electro-pneumatic dual-circuit braking system * Lighting according to ECE R48 * Aspöck lighting system * Sockets: * 24N (ISO 1185) * 24S (ISO 3731) * 15-pin ADR (ISO 12098) ----Wheels / Tyres Tyre size: 205/65 R17.5 * 12 wheels * Steel rims * M+S tyres * 3PMSF winter tyres * Tyre pressure monitoring system * Spare wheel holder on front wall ----Chassis / Superstructure High-strength S700 MC steel chassis * 2" kingpin (bolted) * Gooseneck with 90° vertical corners * Partial metallization Zn/Al corrosion protection * 45 mm hardwood floor * Tread plate over wheels ----Loading Area / Extensions Side extension up to 300 mm * 100x100 box section sockets * Galvanized steel extensions * Hardwood boards (3 × 100 mm) * Storage box for extension boards ----Wheel Wells / Excavator Trough Wheel well for vehicle transport * Excavator trough at rear * Width: 750 mm * Depth: 310 mm * Length: 3,000 mm * Wheel well bridges made of hardwood ----Ramps Foldable drive-on ramps * Ramp capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulic sliding system * Ramp surface made of hardwood * Ramp safety with tension chain ----Load Securing Lashing points: Gooseneck: * 2 × 2 pcs 5 t * 1 × 2 pcs 10 t * Platform outside: * 3 × 2 pcs 5 t * 4 × 2 pcs 10 t * Under outer frame: * 2 × 2 pcs 8 t * Platform: * 4 × 2 pcs 6 t (see purchase contract 20186783) Additional securing: * 5 × 2 stake pockets * 3 × 2 multiple stake pockets * 8 × 2 plug-in stakes * Container locks for 20 ft / 30 ft containers ----Equipment / Accessories Toolbox (700 × 400 × 360 mm) * Revolving warning lamp * Rear work lamp * Extendable warning signs with LED * Side marking tape * Rear marking tape * Wheel chocks * Wabco Smartboard * Connection cable (NATO socket) For further information, please do not hesitate to contact us.

Condition: new, maximum load weight: 37,619 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 9,240 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture 2025 | NEW | 40t Ramps | Top Specification Location: Germany Condition: New / Unused Availability: Immediately --- Description For sale is a brand-new Kässbohrer K.SLS 3 / 0N ? 18/30 low-loader, year of manufacture 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps — ready for immediate use. --- Technical Data Dimensions: - Overall length: 13,190 mm - Platform length: 9,240 mm - Platform height: 875 mm - Overall width: 2,550 mm (+600 mm with side extensions) - Gooseneck length: 3,950 mm - Unladen weight: approx. 10,381 kg Ncedpfx Akox Efzuecjw Weights: - Permissible gross weight at 80 km/h: 48,000 kg - Permissible gross weight at 60 km/h: 52,800 kg - Total axle load: 30,000 kg - Kingpin load: up to 18,000 kg --- Chassis & Axles: - 3 BPW axles, air suspension, drum brakes - 1 trailing axle at rear - Lift axle (load-dependent + automatic control from the cab) - Tyres: 245/70 R17.5, M+S + 3PMSF - Tyre pressure monitoring R141 - Wabco EBS 4S/3M, ABS + RSS - Wabco Smartboard (axle load, suspension, diagnostics, etc.) --- Ramps & Loading Area: - Foldable 40t access ramps - Ramp length: 2,750 mm - Ramp width: 850 mm - Hydraulic sliding system - 45 mm hardwood floor + chequer plate over wheel arches --- Load Securing: - Multiple 8,000 daN and 13,400 daN lashing points - 7×2 stake pockets + plug-in stakes - Container locks for 1×20 ft - 450 mm front wall, side and rear walls made of aluminium --- Body & Chassis: - High-strength S700 MC steel - Partially metallised (Zn/Al 85/15) — strong corrosion protection - Rear angle: 10°, 500 mm - 2" kingpin - Mechanical landing legs at front - 45t supports at rear --- Equipment: - 2× toolboxes - All-round warning beacon - LED lighting - Rear work lights - Wheel chocks - 9×2 extensions (up to +300 mm) - Stake box - Reflective strips on sides & rear --- Colour: RAL 3020 Traffic Red We are happy to provide further information upon request.