Used Unsinn As Trailers for sale (140)

Condition: new, empty load weight: 380 kg, maximum load weight: 920 kg, overall weight: 1,300 kg, loading space length: 2,550 mm, loading space width: 1,280 mm, loading space height: 1,530 mm, tire size: 165R13, Plywood box body WEB40 from trailer manufacturer Unsinn. The car trailer with plywood body made in Germany has white walls and a transparent roof. Ncedpfjq Nzr Dex Akcow The box trailer is equipped with a lockable single-leaf door with espagnolette lock, support wheel, light roof, tubular drawbar and plastic-coated white walls. Accessories for this car trailer include ramps, lashing rails, rear supports, lashing eyes, tool box, anti-theft device, lashing straps and much more.

Condition: new, empty load weight: 390 kg, maximum load weight: 910 kg, overall weight: 1,300 kg, loading space length: 2,300 mm, loading space width: 1,500 mm, loading space height: 300 mm, Product information "UNSINN WEB-HK2315-13-10 1300kg 230x150x30cm rear tipper with PUMPless" Rear tipper from trailer manufacturer Unsinn. Made in Germany! Ncsdpfx Akoq Rvcqocsw The WEBHK2315-13-10 single-axle high-loader is a rear tipper. Easy to load thanks to its foldable and removable aluminum side walls. The load can then be tipped manually using the hydraulic system. A welded base frame makes the tipping trailer very stable. This car trailer is equipped with foldable and removable side walls, a solid steel floor, PUMPless hydraulics for cordless screwdrivers, a support wheel, lashing eyes, a welded, hot-dip galvanized steel frame, and a sturdy V-drawbar. Accessories such as a leaf grid attachment, side wall attachment, tarpaulin and frame, tarpaulin, load securing net and supports are also available for an additional charge.

Condition: new, empty load weight: 630 kg, maximum load weight: 1,970 kg, overall weight: 2,600 kg, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 900 mm, tire size: 165r13, Product information "UNSINN WEB-DK3017-26-13-E 2600kg 306x175x85cm Grated sides, three-way tipper" Three-way tipper with a corrugated grating superstructure from trailer manufacturer Unsinn, model WEB-DK3017-26-13-E. Made in Germany! This flatbed trailer, designed as a three-way tipper, is equipped with electric hydraulics for tipping. The folding and removable side walls allow for easy loading of the trailer from the side and rear using a forklift, wheel loader, or by hand. A welded, hot-dip galvanized steel frame makes the tipper trailer very stable. The tipper with grated sides is equipped with folding and removable side walls, a solid steel floor, electro-hydraulic system, automatic support wheel, lashing eyes, welded hot-dip galvanized frame, rail system, and a very stable V-drawbar. For an additional charge, tipper accessories such as side wall extensions, tarpaulin and frame, flat tarpaulin, net, box, loading ramps, and supports are available. ----- With us, you can also get: · Financing · Leasing (for commercial customers only) · Consultation Nodpfx Aog Un Dzskcecw · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repair · TÜV inspection for car trailers Car trailer center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Condition: used, maximum load weight: 2,000 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,675 mm, loading space width: 1,515 mm, loading space height: 30 mm, Gross weight: 2,600 kg, high-loader, open platform, overrun braked, rear tipper with pump, cordless screwdriver included. Loading height: 700 mm. Errors and prior sale excepted. Ncodpfx Akjym Ih Uscew

Condition: used, maximum load weight: 1,995 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,569 mm, total height: 1,029 mm, Total weight: 2,600 kg, high-loader, open box, overrun braked, rear tipper with hand pump. Errors and prior sale excepted. Ncsdpfx Akeym Ig Dscew

Condition: used, maximum load weight: 615 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2026, loading space length: 2,011 mm, loading space width: 1,100 mm, loading space height: 350 mm, A1 GW2640818, * Unique, torsionally rigid aluminium chassis for safe driving characteristics * 4 recessed, foldable lashing eyes mounted in the side wall for secure load securing * Side walls made of anodised aluminium hollow profiles, rear foldable, with recessed latches * Folding front wall * Loading height 550 mm Ncsdpfeym Ihhjx Akcsw Errors and prior sale reserved

Condition: used, empty load weight: 1,600 kg, maximum load weight: 1,900 kg, overall weight: 3,500 kg, first registration: 05/2011, loading space length: 4,250 mm, loading space width: 2,100 mm, loading space height: 2,250 mm, loading space volume: 20 m³, suspension: steel, color: grey, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, tail-lift, (DE), UNSINN FG35 flatbed with tarpaulin trailer, curtainsider tarpaulin, tandem axle, Dautel 750 kg tail lift, leaf spring suspension, through-loading system with front doors, loading area 4.25/2.10/2.25 m, unladen weight 1,600 kg, gross vehicle weight 3,500 kg, first owner, We also buy your truck or offer a trade-in., Online viewing available via WhatsApp and Viber. We can arrange delivery to your address in Germany and Europe or to international ports for an additional fee. Upon request, we can also offer remote quality assurance by arranging a TÜV inspection for you (for a fee). Fast and easy financing options for customers from Germany. For exports outside the EU, the statutory VAT must be paid as a deposit. Errors and prior sales excepted. You can find more offers on our website. We will gladly answer all your questions. German and English: , Czech, French, Russian, Bulgarian, German and English: . All information without guarantee, including equipment and accessories. Ncodozh Hryjpfx Akcew (EN), UNSINN FG35 flatbed with tarpaulin trailer, curtainsider tarpaulin, tandem axle, Dautel 750 kg tail lift, leaf spring suspension, through-loading system with front doors, loading area 4.25/2.10/2.25 m, unladen weight 1,600 kg, gross vehicle weight 3,500 kg, first owner, Online review is available via WhatsApp and Viber. We can organize a delivery to your address in Germany and Europe or to the international ports for extra charge. On request, we can offer quality assurance from a distance by doing MOT for you (chargeable). Fast and easy financing options for customers from Germany. For export outside the EU, the legal VAT has to be paid as a deposit. Errors and intermediate trade reserved. For more offers visit our website. We are happy to answer all your questions. German and English: , Czech, French, Russian, Bulgarian, German and English: . All data without guarantee incl. equipment and accessories.

Condition: new, 9935090 Ncodpfx Aezb Sp Eskcow Box trailer with double-wing door and side door Manufacturer: Unsinn Type: UKU 301519-20-13 Door Internal dimensions: 3050 x 1570 x 1940 mm (L x W x H) Permissible total weight: 2000 kg Unladen weight: approx. 520 kg Payload approx. 1480 kg (payload specifications may vary depending on equipment and design) Loading height approx. 530 mm Rear door with double wings and aluminum hinges Door latch made of stainless steel Side door on the right side when facing forward Color: white RAL 9016 Unique, torsionally rigid aluminum chassis for safe driving characteristics Walls made of lightweight panels, consisting of GRP-steel-sandwich in RAL 9016 Smooth GRP outer walls for optimal labeling/foil application of the trailer (Unique-Panel) Steel-coated inner walls ensure high impact resistance Loading area made of multi-layer glued screen-printed plywood, 18 mm thick, non-slip and waterproof Lashing system with 8 adjustable lashing eyes for optimal load securing Rod lashing rail on the side walls and front wall, height 900 mm Transparent skylight with high light transmission Rear frame and trim profiles made of special anodized aluminum profiles Magnetic, pivoting LED interior light incl. motion sensor (can be positioned anywhere in the interior) Automatic support wheel, load capacity 500 kg 13-pole connector and reversing light Position lights at the front Two maneuvering handles on the front wall ALKO coupling head with impact protection incl. vehicle documents Possible additional options and accessories for this trailer: Spare wheel Theft protection Locking bar Wheel shock absorbers incl. 100 km/h approval Sliding supports Individual interior design Registration of your new trailer at the vehicle registration office

Condition: new, functionality: fully functional, machine/vehicle number: 14160410, empty load weight: 600 kg, maximum load weight: 2,000 kg, overall weight: 2,600 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,300 kg, permissible axle load (axle 2): 1,300 kg, loading space length: 4,260 mm, loading space width: 2,040 mm, loading space height: 350 mm, total length: 5,620 mm, total width: 2,100 mm, suspension: other, tire size: 14 Zoll, tire condition: 100 %, maximum speed: 100 km/h, color: grey, trailer brake: trailer braked, Year of construction: 2026, Loading area approx. 2040 x 4260 mm External dimensions approx. 2100 mm x 5620 mm Permissible total weight: 2600 kg Payload: approx. 2000 kg (payload may vary depending on additional equipment) Manufacturer: Unsinn Special features: - Recessed stainless-steel locks - 8 lashing points, each with up to 600 daN load capacity and DEKRA certified - 14-inch tires Additional equipment: - Floor plate: 18 mm multiplex wood / phenolic resin-coated plywood - All side walls foldable and removable - Corner posts removable - Drop sides: anodized aluminum, height: 350 mm - Vehicle documents included Njdpfx Akey I Thqecocw Chassis: - Alko | rubber suspension axle with shock absorbers and 100 km/h speed rating | V-drawbar with ball coupling | automatic heavy-duty jockey wheel | automatic reversing system Electrics: - 12 Volt | 13-pin connector | rear fog light | marker lights If you would like to purchase this trailer or have further questions regarding trailers, please refer to our internal high-bed trailer "No. 14160410".

Condition: new, 9935930 Rotating platform trailer from Unsinn Fahrzeugtechnik, as a 3-axle model The trailer has a day registration but is new and unused! Manufacturer: Unsinn Ncjdpfx Akjza Nfnscjw Type: UD-3 8424-35-13 Bed dimensions: 8460 x 2440 x 350 mm (L x W x H) Permissible total weight: 3500 kg Unladen weight: 1410 kg Payload: 2090 kg (Payload figures may vary depending on equipment and design) Low loading height due to 195/50 R13 C tires 3-axle chassis ensures exceptional ride stability Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics Hollow profile construction, welded and completely hot-dip galvanized 16 sturdy lashing points integrated into the frame on the sides (8 per side) 10 additional lashing eyes under the loading area Aluminum side walls that can be folded down on all sides Side walls and corner posts can be removed without tools Internal long-stroke latches made of metal Loading area made of multi-layered, non-slip screen-printed plywood, 18 mm thick Adjustable stabilizer spring for the drawbar 13-pin plug Outline lights Including vehicle documents Possible additional options and accessories for this trailer: Wheel shock absorbers incl. 100 km/h certificate Spare wheel incl. holder Theft protection Registration of your new trailer at the vehicle registration office Load securing net incl. net hooks mounted on the side wall Retractable loading ramps

Condition: used, maximum load weight: 3,150 kg, overall weight: 4,500 kg, axle configuration: 2 axles, first registration: 04/2003, Equipment: ABS, Unsinn trailer with extendable drop-down sides. Equipped with a separate Briggs & Stratton 9 HP gasoline engine. Features electric starter and manual pull starter, cable remote control, and a galvanized cover. Galvanized frame, loading area 2.46 x 1.46 m, also suitable for mini excavators, ABS, support wheel, 2 hydraulic supports at the rear, AL-KO axles, DUO Matic, adjustable drawbar. ===German registration=== ==Single owner==. Net price: 5,800 EUR. Ncedpfoy Hncaox Akcow =====Daily purchase of commercial vehicles, trade-ins also possible=====

Condition: used, functionality: fully functional, maximum load weight: 1,550 kg, overall weight: 2,000 kg, first registration: 10/2018, next inspection (TÜV): 06/2028, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 500 mm, Many models available online at ANHÄNGERWIRTZ Conveniently and around the clock, purchase online at trailershop.de Pick up yourself or have it delivered. The online pickup marketplace for your new trailer offers strong brand manufacturers! Over 850 new trailers in stock Over 130 used trailers always available. Non-binding sample offer: Nsdpfxsy Sfwxe Akcscw Used flatbed box trailer in almost as-new condition, as it was only used for luggage 50cm internal height – very robust aluminum profile side walls Locks – full aluminum lid with lift assists Crossbeams under multiplex floor Support wheel in well-maintained condition, from private owner Wooden floor panel – sliding lashing eyes mounted inside the loading area Lashing rail with pressed groove – roof support rubberized 2000kg axles, payload approx. 1550kg V-drawbar – robust jockey wheel – lockable ball coupling Recent technical inspection until 06/2028 80 km/h or possible upgrade to 100 km/h (requires new tires!) + 500 Euros !!! Please schedule a viewing appointment and have your Scout ID ready !!! Sales and phone order acceptance at the following times: MON – FRI 8:00-12:30 & 14:00 to 18:00 or around the clock via our trailershop Copyright – Trademark protection used, unsinn deckel diff p 05/26

Condition: like new (used), functionality: fully functional, empty load weight: 835 kg, maximum load weight: 2,165 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 350 mm, tire size: 185R14C, Year of construction: 2024, UDK 3017-30-14 with mesh extension 1 day = €55 2 days = €50 per day 3 days = €45 per day 4 days = €40 per day Prices include VAT. Ncodpfxetq Hmwo Akcjw With steel floor - Spinlock, hook fasteners, and electric hydraulics with emergency pump - Steel-aluminum side wall 350mm / ramp shaft including folding license plate holder Three-way tipper Max. Total weight 3000 kg Payload approx. 2210 kg Box/trunk dimensions (interior L/W/H): 3060 x 1750 x 350 mm Tires 185 R14C 8PR Number of axles: 2 Trailer loading height approx. 770 mm Frame Torsion-resistant longitudinal member chassis (longitudinal members continuous from the overrun device to the light bracket) for excellent directional stability Closed, fully welded, and hot-dip galvanized steel frame profile for optimal stability Integrated ramp shaft with tensioning device and foldable license plate holder for safe and elegant storage of the loading ramps under the loading area With maintenance support to secure the tilted deck during maintenance work Joint wheel Reinforced automatic jockey wheel mounted on a separate crossbeam with a load capacity of 500 kg for safe parking of the trailer Maneuvering handle with Practical tensioning strap reel for easy handling Loading area & bridge Solid steel floor across the entire width of the vehicle Bridge with a maximum number of crossbeams for particularly high point loads Side walls Anodized, fully foldable and removable aluminum side walls Galvanized angle lever locks with spring lock Rear side wall with steel planking, foldable including anti-slip protection for loading ramps Four plug-in steel corner stanchions for heavy loads as well as easy loading and attachment of accessories Load securing Patented Spinlock load securing system for greater flexibility and efficiency in load securing, DEKRA certified Lashing pins on and under the loading area, each with a load capacity of up to 1500 daN (kg) and rotatable 360° Pot magnet with key ring for removing the lashing pins when the side wall is open Hydraulics Protected electric hydraulic system with battery and powerful charger for a long service life Pumpless emergency pump Includes a matching socket wrench for convenient and easy tilting with a cordless screwdriver when the battery is low. Electrics Lighting with a 13-pin connector and protected rear lights for long and safe operation. Function of the electrical components. Cable routing in the longitudinal beams of the chassis —> protection from external influences, therefore particularly durable.

Condition: new, machine/vehicle number: 523058, empty load weight: 625 kg, maximum load weight: 1,975 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 700 mm, tire size: 165 R13, Year of construction: 2022, Rent a WEB32 E 2600kg high-loader rear tipper! 1 day = €45 Nedstk H H Iopfx Akcscw 2 days = €40 per day 3 days = €35 per day 4 days = €30 per day Prices include VAT. Electro-hydraulic system without hand pump Frame: · Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics · Hollow-section construction, welded and fully hot-dip galvanized Joint wheel: · Reinforced, automatic jockey wheel for safe parking of the loaded trailer. Load capacity: 500 kg Side walls: · Hollow aluminum profile, anodized, foldable on four sides, removable, with recessed locks · 4 plug-in steel corner posts for heavy loads Loading area: · Steel floor with 6 recessed lashing rings, each loadable up to 600 kg daN Electrics/Hydraulics: · Lighting with 13-pin connector and reversing light · Electrohydraulic system in tank with battery and charger, without hand pump

Condition: new, functionality: fully functional, machine/vehicle number: 208663, empty load weight: 1,190 kg, maximum load weight: 2,310 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,660 mm, loading space width: 2,040 mm, loading space height: 400 mm, tire size: 185R14C, color: silver, Year of construction: 2024, Equipment: tail-lift, SPECIAL PRICE until June 5, 2025!!! 650 mm mesh extension with integrated pendulum bearing in the corner stanchion, 4-sided, ILxIB 3660x2040 mm, type UH, UDK Aluminum loading ramps, 2560x300 mm, load capacity 2800 kg/pair, and one pair with sturdy pivoting parking supports for 13/14 inch tires UNSINN plastic tool box, splash-proof, mounted under the loading area, on the right in the direction of travel, Inner dimensions LxWxH 430x180x188 mm Frame -Torsion-resistant longitudinal beam chassis (longitudinal beams continuous from the overrun device to the light bracket) for high directional stability -Closed, fully welded, and hot-dip galvanized steel frame profile for optimal stability -Integrated ramp shaft with clamping device and foldable license plate holder for safe and elegant storage of the loading ramps under the Loading Area -With maintenance support for securing the tilted deck during maintenance work Joint Wheel -Reinforced automatic jockey wheel mounted on a separate crossbeam with a load capacity of 500 kg for safe parking of the trailer -Maneuvering handle with practical tensioning strap retractor for easy handling Loading Area & Deck -Solid steel floor extending across the entire width of the vehicle -Bridge with the maximum number of crossbeams for particularly high point loads Ncsdpformlzhjx Akcew Load Securing -Patented Spinlock load securing system for greater flexibility and efficiency in load securing, DEKRA-certified -Lashing pins recessed into the steel floor, symmetrically distributed -Lashing pins on and under the loading area, each capable of withstanding loads of up to 1500 daN (kg) and rotatable 360° -Pot magnet with key ring for removing the lashing pins when the side panel is open Side Panels -Solid steel side panels (400 mm), foldable and removable on four sides, with galvanized angle lever locks and an integrated net and tarpaulin strip, powder-coated in black-gray (RAL 7021). -Four plug-in steel corner posts for heavy loads and easy loading and attachment of accessories. Hydraulics -Protected electric hydraulic system with battery and powerful charger for a long service life. -Pumpless emergency pump including a matching socket for convenient and easy tipping with a cordless screwdriver when the battery is low. Electrics -Lighting with a 13-pin connector and protected rear lights for long and safe operation of the electrical components. -Cable routing in the longitudinal beams of the chassis —> protection from external influences, therefore particularly durable.

Condition: new, Long material trailer with extendable rear lighting carrier and extendable drawbar The flexible combination of a long material trailer and a standard flatbed Manufacturer: Unsinn Type: ULM 4820-35-14 Internal dimensions: 4860 x 2040 x 350 mm (L.W.H.) Permissible total weight: 3500 kg Curb weight: approx. 1285 kg Payload: 2215 kg (Payload may vary depending on equipment and configuration) Loading height: approx. 780 mm Rear lighting carrier extendable by 2000 mm, flush with upper edge of loading area, max. load capacity 200 kg for long materials Drawbar can be extended without tools (usable drawbar length 3100 mm) Support bracket on tow bar, variable mounting positions 4 stake pockets 100x100 mm, mounted flush with the loading area (Note: Unlike the photos, the trailer has 4 instead of 2 stake pockets) 2 insertable stakes 90x90 mm with various lashing options, total length approx. 3000 mm Reinforced jockey wheel for safe parking of the loaded trailer, load capacity 500 kg Premium maneuvering handle with strap roller mounted on the jockey wheel Ncedpsy Rbwfjfx Akcow 8 robust folding lashing recesses, countersunk in the floor frame profile 8 lashing eyes under the loading area Unique, torsionally rigid longitudinal frame chassis for safe driving characteristics Hollow profile construction, welded and fully hot-dip galvanized Corner and center stakes removable without tools Robust long-path locks made of metal on side walls Floor plate made of multi-glued phenolic plywood, 18 mm, anti-slip and waterproof Lighting with 13-pin plug Reversing lights Marker lights Incl. vehicle registration documents Available options and accessories for this trailer: Shock absorbers incl. certificate for 100 km/h Spare wheel incl. holder Anti-theft device Registration of your new trailer at the vehicle registration office

Condition: new, Long material trailer with extendable rear light bracket and extendable drawbar The flexible combination of a long material trailer and a standard flatbed Manufacturer: Unsinn Model: ULM 5420-35-14 Internal dimensions: 5460 x 2040 x 350 mm (L x W x H) Permissible gross weight: 3500 kg Unladen weight: approx. 1285 kg Payload: 2215 kg (Payload may vary depending on equipment and design) Loading height approx. 780 mm Rear light bracket extendable by 2000 mm, flush with the loading platform, max. load capacity 200 kg for long materials Drawbar extendable without tools (free drawbar length 3100 mm) Support bracket on coupling drawbar, variably mountable 4x stake pockets 100x100 mm, flush-mounted with the loading platform 2x insertable stanchions 90x90 mm with multiple lashing options, total length approx. 3000 mm (Note: Contrary to the photos, this trailer is equipped with 2 instead of 4 insertable stanchions) Reinforced jockey wheel for safe parking of the loaded trailer, load capacity 500 kg Premium maneuvering handle with strap reel mounted on the jockey wheel 8 robust foldable lashing recesses, flush-mounted into the floor frame profile 8 lashing rings under the loading platform Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics Hollow profile construction, welded and fully hot-dip galvanized Corner and center stanchions removable without tools Robust long-stroke metal locks on the side boards Floor plate made of multiply bonded phenolic plywood, 18 mm, non-slip and waterproof Lighting with 13-pin plug Reversing lights Nedoy Rbvbspfx Akcjcw Marker lights Incl. vehicle documents Optional features and accessories for this trailer: Wheel shock absorbers incl. 100 km/h certification Spare wheel incl. bracket Anti-theft device Registration of your new trailer with the road traffic authority

Condition: new, Three-way tipper with electric pump & cordless drill pump Manufacturer: Unsinn Model: UDK 4220-35-14 Dimensions: 4260 x 2040 x 350 mm (LxWxH) Loading height: 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 1145 kg Payload approx.: 2355 kg (payload details may vary depending on equipment and configuration) Electrohydraulic pump with emergency function 'Pumpless', allows tipping operation with a cordless drill in case of low battery Integrated battery charger with 230 V socket Battery and pump unit safely stored and protected from dirt inside the battery box Integrated ramp compartment with tensioning device and foldable license plate holder for stowing loading ramps under the bed (easy retrofit of ramps possible) Unique, torsion-resistant longitudinal beam chassis for stable driving characteristics and high stability Fully closed, fully welded, hot-dip galvanized steel frame profile Solid steel floor spanning the entire width of the trailer Maintenance support for securing the raised tipper platform Reinforced automatic jockey wheel Shunting handle with practical strap winder for easy handling Load securing system for more flexibility and efficiency, DEKRA certified 18 recessed tie-down points in the steel floor Tie-down points on and under the loading surface, each rated up to 1500 kg and rotatable 360° Side panels fully tiltable and removable Rear drop-side with steel cladding, drop-down with anti-slip safety for driving ramps Sturdy lever locks on side panels 4 removable steel corner posts Lighting with 13-pin plug and reversing light Including vehicle documents Available options & accessories for this trailer: Ncedpoy Rbuqsfx Akcsw Whether mesh, steel, or side panel extensions – choose the right variant and customize your trailer. Thanks to the smart KOMBILINE system, extensions can be easily combined; e.g., mesh extensions at front and rear perfectly combined with steel or side panel extensions on the sides, without extra effort. Loading ramps Load securing net Anti-theft device Registration of your new trailer at the vehicle licensing authority

Condition: new, empty load weight: 675 kg, maximum load weight: 1,925 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 650 mm, total length: 4,200 mm, total width: 1,660 mm, total height: 1,100 mm, suspension: other, tire size: 165R13, tire condition: 100 %, trailer brake: trailer braked, Unsinn WEB HK 2715-26-13 UHK 2627 web32 - NEW VEHICLE - Pump-less system as standard (electro-hydraulic system available at an extra cost) NEW: SPINLOCK cargo securing system Offer INCLUDES original aluminum extension 35 cm, with 4-way pivoting Technical data: Permissible total weight 2600 kg Unladen weight 675 kg - Payload 1925 kg Internal box dimensions 276 x 150 x 30 + 35 cm Overall dimensions 420 x 166 x 110 + 35 cm Tires 165R13 Tandem axle, braked Loading height approx. 73 cm Structure and equipment: Frame / Chassis: Maintenance-free rubber spring axles, independent wheel suspension Unique, torsionally rigid longitudinal member chassis for safe driving characteristics Frame closed hollow profile construction, welded and completely hot-dip galvanized Overrun brake with reverse automatic function Support wheel, heavy-duty, metal rim, automatically foldable, load capacity 500 kg Side panels: Side panels 25mm aluminum hollow profile, anodized, four-sided foldable and removable, recessed fittings 4 pluggable steel corner posts for high load capacity Ncjdpfx Akjzcvrmecow Cargo securing / Loading area: Steel floor, continuous, bent in one piece Many cross members for high point load capacity NEW: Spinlock cargo securing system: 10 lashing points with 1000 kg tensile force each, flush-mounted, integrated, can be rotated 360°, usable on and under the loading area Electrical system / Hydraulics: Electrical system 12V 13-pole plug, with reversing light Compact lighting unit, mounted protected Hydraulic tilting to the rear Automatic roller tipper locking mechanism at the front

Condition: new, Lowerable trailer – ideal for transporting motorcycles Manufacturer: Unsinn Model: UA 3118-18-13 Internal dimensions: approx. 3150 x 1800 x 150 mm (L x W x H) Gross vehicle weight: 1,800 kg Unladen weight: approx. 440 kg Payload: approx. 1,360 kg (Payload figures may vary depending on equipment and configuration) Loading height: 460 mm Unique, torsion-resistant longitudinal chassis for safe handling, fully hot-dip galvanised Three-sided body made of robust steel profiles Continuous loading ramp allows access over the entire width of the loading area Shock absorbers incl. 100 km/h certification Automatically adjusting brakes Foldable license plate holder mounted Robust plastic mudguards fitted Safe and fast load securing via tie-down points along the outer frame 1 lashing ring mounted centrally at the rear of the loading area Reinforced automatic jockey wheel for safe parking when trailer is loaded Nedpey Nb Nlofx Akcocw Loading platform made of multi-bonded phenolic plywood, 18 mm thick, seamless, slip-resistant and water-resistant Ramp angle when lowered: approx. 5° Lighting with 13-pin plug and reversing light Hand pump with hydraulic lowering system and lowering lock (only available with braked version) Including vehicle documents Optional equipment and accessories for this trailer: Motorcycle wheel chock Motorcycle tie-down straps Drop side extension Winch Spare wheel including holder Anti-theft device * Registration of your new trailer at the vehicle registration office

Condition: new, Lowerable trailer with extremely flat ramp angle Manufacturer: Unsinn Model: UA 3118-15-13 Motorcycle trailer, machine transporter Gross vehicle weight: 1,500 kg Unladen weight: 455 kg Payload: approx. 1,045 kg (payload may vary depending on equipment and configuration) Dimensions: 3,150 x 1,800 x 150 mm Loading height: 460 mm Unique, torsion-resistant longitudinal chassis for safe driving characteristics, fully hot-dip galvanized 3-sided body made of sturdy steel profile Shock absorbers incl. 100 km/h type approval Continuous ramp allows loading across the entire width of the loading area Foldable license plate holder installed Durable plastic mudguards installed Reinforced, automatic jockey wheel for safe parking of the loaded trailer Loading surface made of multi-layer, phenolic resin-coated plywood, 18 mm thick, seamless, anti-slip and waterproof Ncsdpfx Aoy Nb H Dokcsw Fast and secure lashing possible around the outer frame 1 lashing ring on the loading surface, rear center Ramp angle when lowered approx. 6° Lighting with 13-pin connector and reverse light Hand pump with hydraulic lowering device and mechanical lowering safety lock Tires: 195/50 R13C Braked Incl. vehicle documents Available options and accessories for this trailer: Spare wheel incl. holder Anti-theft lock Registration of your new trailer with the road traffic authority

Condition: new, Lowerable box trailer with side door and aerodynamic slant from Unsinn Fahrzeugtechnik Manufacturer: Unsinn Model: UKA 3717-18-13 Internal dimensions: 3750 x 1770 x 1940 mm (L x W x H) Permissible total weight: 1800 kg Unladen weight: approx. 680 kg Payload: approx. 1120 kg (payload may vary depending on equipment and configuration) Walls made from lightweight composite panels (GRP-steel sandwich) Colour: white RAL 9016 Aerodynamic front slant Swivelling LED interior light with motion sensor Unique Panels with smooth external GRP coating for easy application of decals/wraps Steel-coated interior walls for high impact resistance Translucent roof for maximum daylight entry Shock absorbers including 100 km/h type approval Robust steel frame with tubular drawbar, fully hot-dip galvanized Rear frame and edging profiles made from anodized aluminium Reinforced automatic jockey wheel with practical manoeuvring handle Rear tailgate opens upwards Heavy-duty stainless-steel bar lock on the tailgate (lockable) Side door (1600 x 750 mm) with heavy-duty stainless-steel bar lock (lockable) and aluminium hinges Rubber lip on tailgate protects the interior from splash water Continuous loading ramp allows easy, safe loading across the entire trailer width Load floor made of continuously laminated anti-slip and waterproof phenolic plywood, 18 mm thick, seamless Ramp angle in lowered position: approx. 5° Extremely flat ramp angle allows easy loading with a pallet truck Ncedpjy Nb Egsfx Akcsw 6 fold-down lashing rings on the sides inside Lighting system with 13-pin plug Position/marker lights Two manoeuvring handles at the front Incl. vehicle documents Optional equipment and accessories for this trailer: Side lashing rails Load bars for optimal cargo securing Spare wheel including holder Anti-theft device Registration of your new trailer at the vehicle licensing office

Condition: used, Nearly new trailers from our extensive rental fleet! 9930809 Lowerable box trailer by Unsinn Fahrzeugtechnik Manufacturer: Unsinn Model: UKA 3717-18-13 Internal dimensions: 3750 x 1770 x 1940 mm (LxWxH) Gross weight: 1800 kg Unladen weight: approx. 680 kg Payload: approx. 1120 kg (Payload figures may vary depending on equipment and construction) Ncedpfoy Nb Axox Akcjw Walls made of lightweight GFRP-steel sandwich panels Colour: white RAL 9016 Swivelling LED interior light with motion sensor Unique panels with smooth GFRP coating on the exterior for easy wrapping Steel-coated interior walls for high impact resistance Transparent light roof providing excellent light transmission Shock absorbers including 100 km/h approval certificate Durable steel frame with tubular drawbar, fully hot-dip galvanised Rear frame and edging profiles made of anodised aluminium Reinforced automatic jockey wheel with convenient manoeuvring handle Upward-opening tailgate Robust stainless steel drop bolt lock on tailgate (lockable) Rubber lip on the tailgate protects the interior from spray water Continuous loading ramp enables easy and secure loading across the entire trailer width Load floor made from multiple-bonded birch plywood, 18 mm, seamless, anti-slip and waterproof Ramp angle when lowered: approx. 5° Extremely low ramp angle allows easy access with a pallet truck 6 side-folding lashing rings inside Lighting with 13-pin plug Marker lights Two front manoeuvring handles First registration: 09.02.2024 Workshop inspected Optionally with new TÜV inspection Available options and accessories for this trailer: Side lashing rails Load-securing bars for optimal cargo safety Spare wheel including mount Anti-theft device Registration of your new trailer with the vehicle registration office

Condition: new, Special offer! Stock vehicle from 2023! No first registration! 9930301 Refrigerated trailer by Unsinn Fahrzeugtechnik with three ceiling rail tracks Manufacturer: Unsinn Nodpfjy Nau Tsx Akcocw Model: KIK 3536-14-1750 with 3 ceiling rail tracks Internal dimensions: 3660 x 1750 x 2250 mm (L x W x H) Permissible total weight: 3500 kg Unladen weight: approx. 1545 kg Payload: approx. 1955 kg (Payload specifications may vary depending on equipment and design) Loading height: 650 mm Color: silver RAL 9006 3 ceiling rail tracks 200 mm high, three-sided stainless steel scuff rail inside Additional locking bar on left rear door Unique, torsion-resistant longitudinal chassis for safe handling Frame constructed from robust hollow profiles, welded and fully hot-dip galvanized ALKO axles with self-adjusting brakes Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg 4 crank-type extendable supports Thermo-sandwich body Interior and exterior surfaces made of hot-dip galvanized and powder-coated steel sheet for durability Insulation: 60 mm PU core Insulated floor Double rear wing doors with heavy-duty stainless steel locking bar and aluminium hinges Stainless steel rear portal Cooling capacity: 2,035 watts at 0°C cold room temperature and 30°C ambient temperature Temperature regulation range: -2°C to +15°C Starting current reduction for refrigeration unit operation with 230 V generators instead of 400 V generators Mains connection: 230 volts Evaporator air flow: 1130 m³/h Fully encapsulated unit with outdoor aluminium housing mounted at the front Environmentally friendly, CFC-free refrigerant Electronic cooling controller with defrost management Self-explanatory control display for simple and intuitive temperature setting Control display is lockable for protection against unauthorized use Digital temperature display for easy monitoring of trailer temperature 230 V interior lighting High-quality workmanship – Made in Germany Lighting with 13-pin plug and reversing light Manoeuvring handles at the front Marker lights Including vehicle documents Possible additional options and accessories for this trailer: Shock absorbers incl. 100 km/h approval Spare wheel mounted sideways or on the front wall Lashing rail on side walls Load locks for optimal cargo securing Custom interior fit-out 230 V generator for independent power supply during transit Anti-theft device

Condition: new, Special offer! Stock vehicle from 2022! No initial registration! Refrigerated trailer by Unsinn Fahrzeugtechnik with two roof tube rails Manufacturer: Unsinn Model: KIK 3530-14-1500 Ncedpoy Naf Sefx Akcew Internal dimensions: 3060 x 1500 x 2250 mm (LxWxH) Gross vehicle weight: 3,500 kg Unladen weight: approx. 1,230 kg Payload: approx. 2,270 kg (payload may vary depending on equipment and construction) Loading height: 650 mm Color: silver RAL 9006 2 roof tube rails 3-sided stainless steel rubbing strip in interior Stainless steel rod lock on both rear doors Aluminum hinges Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics Frame made of robust hollow-profile construction, welded and fully hot-dip galvanized by immersion AL-KO axles with self-adjusting brakes Reinforced, automatic jockey wheel for secure parking of the loaded trailer, load capacity 500 kg 4 sturdy crank supports Thermo-sandwich construction Interior and exterior surfaces made from galvanized and powder-coated steel sheet, for heavy-duty use 60 mm PU-core insulation Insulated floor with slip-resistant plastic covering Stainless steel rear portal Cooling capacity 2,035 W at a cold room temperature of +0° C and an ambient temperature of 30° C Temperature control range from -2° C to +15° C Mains connection 230 V Evaporator air volume: 1,130 m³/hour Fully encapsulated unit with weatherproof aluminum cover, mounted on the front Environmentally friendly, CFC-free refrigerant Electronic refrigeration controller with defrost management Self-explanatory control display for easy and intuitive temperature adjustment Control display is lockable, providing protection against unauthorized use Digital temperature display for easy monitoring of the trailer temperature 230 V interior lighting High-quality workmanship – Made in Germany Lighting with 13-pin connector and reversing light Maneuvering handles at the front Marker lights Incl. vehicle documents Optional extras and accessories available for this trailer: - Shock absorbers including 100 km/h type approval - Spare wheel, mounted on the side or front bulkhead - Side lashing rail - Restraining bars for optimum load securing - Custom interior fitting - Anti-theft device - Registration of your new trailer at the vehicle registration office