Used Hapert K Trailers for sale (166)

Condition: new, functionality: fully functional, empty load weight: 700 kg, maximum load weight: 2,000 kg, overall weight: 2,700 kg, loading space length: 5,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, Product information "HAPERT AZURE H2 2700kg 505x200x90cm Low Mesh Extension 13" High Loader" Extremely sturdy high loader from trailer manufacturer HAPERT, model AZURE H-2 2700kg 505x200. Thanks to its foldable aluminum side walls, the flatbed can be used very universally. Pallets can be easily loaded from the side or rear. All flaps and corner stanchions are removable, quickly transforming the flatbed into a clean platform. Rjdpfxowiwvhs Abzsp The standard equipment of the Hapert flatbed high loader is very extensive, including sturdy aluminum side walls, a low 13" chassis, center stanchions, eccentric locks, lashing eyes, net hooks on the hinged bottom sections, an automatic support wheel, an extremely sturdy welded and hot-dip galvanized steel frame, and a reinforced and bolted V-drawbar. Technical specifications can be found below. We also offer a wide range of trailer accessories for Hapert car trailers. These include higher side walls, corrugated mesh extensions, side wall extensions, a gross vehicle weight of up to 3500 kg, parabolic suspension, a raised front frame, loading ramps, rear supports, 100 km/h approval, a tool box, lashing straps, and a trailer lock, all available for an additional charge.

Condition: new, empty load weight: 680 kg, maximum load weight: 2,820 kg, overall weight: 3,500 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, tire size: 195/50R13C, Extremely robustly built and low-profile flatbed trailer with parabolic suspension from trailer manufacturer HAPERT, model AZURE H-2, 3500kg, 405x200. Thanks to its folding sideboards, the flatbed is extremely versatile in use. Pallets can be easily loaded from the sides or the rear. All drop sides and corner posts are removable, quickly converting the high-loader into a standard platform. The standard equipment of the Hapert platform trailers is extensive, featuring sturdy aluminium sideboards, eccentric locks, 13" low-profile running gear, parabolic spring suspension, lashing eyes, net hooks on the lower hinge assemblies, automatic jockey wheel, extremely stable welded steel frame hot-dip galvanized in a dipping bath, as well as a reinforced and bolted V-drawbar. Rodpfxjq Nzwdo Abzjp Additionally, we offer a wide range of accessories for Hapert car trailers. For a surcharge, you can choose higher sideboards, mesh extensions, additional sideboard extensions, front rack, loading ramps, rear props, 100 km/h type approval, toolbox, lashing straps, and trailer lock.

Condition: new, empty load weight: 820 kg, maximum load weight: 1,880 kg, overall weight: 2,700 kg, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, tire size: 195/50r13c, *3-S-K* tipper with leaf grid from *trailer manufacturer* HAPERT model COBALT HM-2 2700kg 305x180x30. In our opinion, *cobalt tippers* from *Hapert* are extremely stable, very well equipped and also have a fair price. The *car trailer* as a *high loader* is designed for durability. High-quality equipment comes as standard with this three-way tipper. The extensive standard equipment of the *tipper trailer* at a glance. A corrugated grid attachment, extremely stable steel frame hot-dip galvanized, electro-hydraulics with battery, removable illuminated control unit, double-walled anodized aluminium side walls, all walls are foldable and removable, easy-to-operate eccentric locks, low chassis with 195/50R13C tyres, lashing eyes with 1000kg load capacity, net hooks, steel plate on wooden floor, automatic support wheel and a reinforced V-drawbar. Redpoqv Eidsfx Abzjp We offer useful accessories for *Hapert three-way tipping trailers*. Here you will find an inexpensive side wall attachment, tarpaulin with frame, emergency hand pump, ramps, rear supports, 100km/h approval, tool box, lashing straps and lock.

Condition: new, empty load weight: 1,260 kg, maximum load weight: 2,240 kg, overall weight: 3,500 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, suspension: steel, tire size: 195/50r13c, *Large three-way tipper from *trailer manufacturer* HAPERT model COBALT HM-2-FERRO 3500kg 405x200x30. Rjdpfx Abeqxbknozep In our opinion, the *Cobalt tipper series* from *Hapert* is extremely stable, very well equipped and has a fair price. The *car trailer* as a *high loader* is designed for durability. High-quality equipment and a very comfortable chassis (parabolic suspension) come as standard with this* three-way tipper trailer*. Here is an overview of the extensive standard equipment of the *tipping trailer*. Built with an extremely sturdy hot-dip galvanized steel frame, solid steel floor, slide-in ramps under the loading area, crankable rear support set, parabolic suspension with shock absorbers and 100 km/h, electro-hydraulics with battery in the container with cover, removable illuminated control unit, double-walled anodized aluminium side walls, all walls are foldable and removable, easy-to-operate eccentric locks, low chassis with 195/50R13C tyres, lashing eyes with 1000kg load capacity, net hooks, steel plate on wooden floor, automatic support wheel and a reinforced V-drawbar. We offer useful accessories for *Hapert three-way tippers*. We can provide you with a side wall attachment, grid attachment, tarpaulin, bows, flat tarpaulin, charger, emergency hand pump, tool box, lashing straps and anti-theft device at a reasonable price.

Condition: new, empty load weight: 860 kg, maximum load weight: 2,640 kg, overall weight: 3,500 kg, loading space length: 3,550 mm, loading space width: 200 mm, loading space height: 1,690 mm, tire size: 195/50r13c, *Low loader *construction machinery transporter tandem *for construction machinery, excavators, platforms, scissor lifts and many other vehicles. Redpfjn E Rm Eex Abzop Hapert builds extremely stable *car trailers* such as this INDIGO LF-2 355x169cm. The *construction machinery trailer* is easy to load via a very stable lattice access flap. An absolute *universal trailer* not only for construction equipment but also for transporting lawn mowers, tractors, bulk goods and small vehicles. Full-length and accessible wheel arches make it easier to get out of a wheel loader. Here, the driver no longer damages the mudguard of the *car trailer*. The *machine transporter* is equipped with a stable lattice flap, parabolic suspension, automatic support wheel, accessible wheel arches, extremely stable welded and hot-dip galvanized frame and V-drawbar. We also offer accessories for machine transport trailers such as bucket storage, aluminum floor, tarpaulin with frame, lashing straps and anti-theft devices at a reasonable price.

Condition: new, empty load weight: 1,060 kg, maximum load weight: 2,440 kg, overall weight: 3,500 kg, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 400 mm, tire size: 185/70r13c, Three-way tipper from trailer manufacturer HAPERT model COBALT HM2+ 3500kg 335x180x40. In our opinion, Cobalt tippers from Hapert are extremely stable, very well equipped and also have a fair price. The high loader car trailer is designed for durability. High-quality equipment comes as standard with this three-way tipper. The extensive standard equipment of the tipper trailer at a glance. An extremely sturdy steel frame is hot-dip galvanized, parabolic suspension with shock absorbers, slide-in ramps under the loading area, crankable rear support set, electro-hydraulics with battery and emergency hand pump, removable illuminated control unit, double-walled 40 cm aluminium side walls anodized in anthracite, all walls are foldable and removable, H-frame, easy-to-operate eccentric locks, low chassis with coarse-tread tyres, LED lighting with light protection, lashing eyes with 1000 kg load capacity, net hooks, solid steel floor, extremely stable automatic support wheel, charger and a reinforced V-drawbar. We offer useful accessories for Hapert three-way tipping trailers. Here you will find a grid attachment, side wall attachment, tarpaulin with frame, tool box, lashing straps and lock at a reasonable price. ----- You can also find all our inexpensive offers on our homepage Germany-wide delivery (except islands) possible! for the prices. ----- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Rjdjf Nt Dijpfx Abzsp Pick-up times: Monday - Friday - o'clock Saturday is not possible!

Condition: used, empty load weight: 1,050 kg, maximum load weight: 1,650 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2022, next inspection (TÜV): 12/2027, loading space length: 4,050 mm, loading space width: 2,200 mm, loading space height: 2,100 mm, loading space volume: 18.9 m³, color: white, construction height: 2,810 mm, working width: 2,250 mm, Equipment: second-hand vehicle warranty, Manufacturer: Hapert Model: Sapphire H-2 Box Trailer Permissible total weight: 2,700 kg Payload: 1,650 kg Unladen weight: 1,050 kg Box dimensions: 4,050 x 2,200 x 2,100 mm Tyres: 195/50 R13C Load height: 640 mm Included: reversing camera - ALKO anti-sway coupling - V-drawbar, hot-dip galvanized - 13-pin plug and reversing lights - 15 mm thick floor plate - Side walls made of 15 mm thick ABS panels with UV-resistant plastic coating, smooth surface - Interior light installed - Rear loading ramp - Side door front right - Front wind deflector - 8 lashing rings - Jockey wheel - 100 km/h approval - Internal lashing rails with locking bars included Used trailer, new TÜV until 11/2027, trailer is in very good condition as it has hardly been used. Price includes registration documents (Part II Registration Certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can supply a free transit license plate. We repair trailers of all makes. Additional accessories available on request. Technical modifications, price changes, and errors excepted. No liability is accepted for errors or typographical mistakes. Features: automatic reversing system, rubber suspension axle, loading ramp, box body, jockey wheel, side marker lights, hot-dip galvanized, braked. Redpjxyumijfx Abzep

Condition: new, machine/vehicle number: Hapert Indigo HF-2 4,05x2,01m 3000kg +abgeschrägtes Heck, empty load weight: 696 kg, maximum load weight: 2,304 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,010 mm, loading space height: 80 mm, Dropside, railing and co. - 8 cm high Combi-Protect railing - Strong, adjustable winch with winch bracket Drive-on package - integrated rail shaft in the frame, behind the license plate - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection Chassis and frame - Chassis completely welded and fully galvanized - Low loading platform - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened castor - U-profile at the rear, for easier attachment of the loading rails Loading area and floor - Sloping rear side approx. 1.30 m - Drive-on angle 11° - Anti-slip and waterproof screen-printed wooden floor - 15 mm thick - Finnish birch plywood, 11-ply waterproof press-glued Lighting equipment - Modern multifunctional lighting - with reversing light - with rear fog light - with two LED front marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 14 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Redsi A D S Dspfx Abzjp Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Indigo LF-2 3,55×1,69m 3500kg niedriges Fahrwerk, empty load weight: 787 kg, maximum load weight: 2,713 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,540 mm, loading space width: 1,690 mm, loading space height: 195 mm, Drive-on tailgate - Full-length tailgate 1.20 m high Rsdpoi A D S Sofx Abzjp - with support brackets - Optimized drive-on angle of 16 - Steel spring supported ramp, lifting aid - HAPERT locking system: robust locks with double action Chassis and frame - Low loading surface of 34 cm - Towing ball coupling with safety indicator - Chassis completely welded and fully galvanized - bolted V-drawbar - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - continuous, non-slip and waterproof screen-printed wooden floor - Finnish birch plywood, 11-ply waterproof press-glued - 15 mm thick - Footboard at the rear Lighting equipment - with reversing light - with rear fog light - with two LED front marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Robust, impact-resistant side edges with HAPERT Safety Steps - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 10 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Combi Protect Rail Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Indigo HT-2 4,05×2,01m 3500kg, empty load weight: 820 kg, maximum load weight: 2,680 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,010 mm, loading space height: 300 mm, Equipment: uploader, Dropside, railing and co. - Combi-Protect railing ramp flap - Welded and hot-dip galvanized ramp - One meter high ramp - With gas pressure damper, lifting and lowering aid - Drive-on angle 13° Chassis and frame - Hydraulically tilting platform - Low loading platform - Towing ball coupling with safety indicator - Chassis completely welded and fully galvanized - Frame extra reinforced with two additional longitudinal beams. - V-drawbar Loading area and floor - Continuous, non-slip and waterproof screen-printed wooden floor Rsdpfx Absi Td Nbjzop - 15 mm thick - Finnish birch plywood, 11-ply waterproof press-glued Lighting equipment - Modern multifunctional lighting - with reversing light - with rear fog light - with two LED front marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - Maintenance-free compact wheel bearings - with automatic reverse - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 8 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet Further standard accessories - Adjustable winch bracket with cable winch - Height-adjustable Hapert automatic support wheel with hardened roller Documents and freight costs - Freight costs to us already included - incl. vehicle registration document (registration certificate part 2) - incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine.

Condition: new, machine/vehicle number: Hapert Indigo LF-2 3,05×1,59m 3500kg niedriges Fahrwerk, empty load weight: 762 kg, maximum load weight: 2,738 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,040 mm, loading space width: 1,590 mm, loading space height: 195 mm, Drive-on tailgate - Full-length tailgate 1.20 m high - with support brackets - Optimized drive-on angle of 16 - Steel spring supported ramp, lifting aid - HAPERT locking system: robust locks with double action Chassis and frame - Low loading surface of 34 cm - Towing ball coupling with safety indicator - Chassis completely welded and fully galvanized - bolted V-drawbar - Height-adjustable Hapert automatic support wheel with hardened castor Rodpfji A D Taex Abzjp Loading area and floor - continuous, non-slip and waterproof screen-printed wooden floor - Finnish birch plywood, 11-ply waterproof press-glued - 15 mm thick - Footboard at the rear Lighting equipment - with reversing light - with rear fog light - with two LED front marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Robust, impact-resistant side edges with HAPERT Safety Steps - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 10 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Combi Protect Rail Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Indigo HT-2 5,05x2,21m 3500kg mit Bordwänden, empty load weight: 1,156 kg, maximum load weight: 2,344 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 5,050 mm, loading space width: 2,210 mm, loading space height: 300 mm, Dropside, railing and co. - 30 cm high aluminum drop sides, removable - Plug-in corner stanchions - HAPERT locking system: robust, recessed locks with double action Drive-on flap - Welded and hot-dip galvanized ramp - One meter high ramp - With gas pressure damper, lifting and lowering aid - Drive-on angle 10.5° Suspension option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Hydraulically tiltable platform - Low loading area Rjdpfx Absh Ewxxozop - Towing ball coupling with safety indicator - Chassis completely welded and fully galvanized - Frame extra reinforced with two additional longitudinal beams. - V-drawbar Loading area and floor - Continuous, non-slip and waterproof screen-printed wooden floor - 15 mm thick - Finnish birch plywood, 11-ply waterproof press-glued Lighting equipment - Modern multifunctional lighting - with reversing light - with rear fog light - with two LED front marker lights - 13-pin plug Wheels and axles - Combination suspension/wheel suspension system - Parabolic suspension incl. shock absorbers - Smooth ride comfort - With automatic reverse - 195/50R13C tires with black rims - Maintenance-free compact wheel bearings Lashing and securing options - TÜV-certified load securing system from HAPERT - 12 recessed fastening brackets integrated in the frame in accordance with the DIN standard with 1000 dAN (kg) per eyelet Further standard accessories - Adjustable winch bracket with cable winch - Height-adjustable Hapert automatic support wheel with hardened roller Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Indigo LF-2 4,05×1,79m 3500kg, empty load weight: 859 kg, maximum load weight: 2,641 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 1,790 mm, loading space height: 195 mm, Drive-on tailgate - Full-length tailgate 1.20 m high - with support brackets - Optimized drive-on angle of 16 - Steel spring supported ramp, lifting aid - HAPERT locking system: robust locks with double action Chassis and frame - Low loading surface of 34 cm - Towing ball coupling with safety indicator - Chassis completely welded and fully galvanized - bolted V-drawbar - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - continuous, non-slip and waterproof screen-printed wooden floor - Finnish birch plywood, 11-ply waterproof press-glued - 15 mm thick - Footboard at the rear Lighting equipment - with reversing light - with rear fog light - with two LED front marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Robust, impact-resistant side edges with HAPERT Safety Steps - Equipped with splash guards - Wheel chocks with holder Redpoi A D S Isfx Abzjp Lashing and securing options - TÜV-certified load securing system from HAPERT - 10 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Combi Protect Rail Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, functionality: fully functional, machine/vehicle number: Hapert Cobalt Plus Tandemachser 4,05×2,00×0,40m 3500kg Dreiseitenkipper, empty load weight: 1,316 kg, maximum load weight: 2,184 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 400 mm, loading space volume: 3.24 m³, Hydraulics (tipping and lowering system) - Electric three-way tipper - rear tipping angle 49 degrees, side 45 degrees Rodpfx Ajvf Nvmebzep - Battery charger - Large 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering via emergency hand pump possible - 12V battery and hydraulic unit protected in steel box - Removable tilt control unit with long spiral cable - 3-phase charge status display via tipper control unit - 7-pin socket mounted on the trailer with charging cable Drive-on package - in the frame, behind the license plate, integrated rail shaft - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection - Two sturdy crank supports, foldable by pulling mechanism - one hand crank with carrier Dropside, railing and co. - High front grille - Additional dropside hinges for more stability and pressure resistance - Three hinges at the front and six at the sides - Double-walled powder-coated aluminum drop sides, 40 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading rails - Low chassis - Towing ball coupling with safety indicator - Reinforced jockey wheel and reinforced jockey wheel bracket Loading area and floor - Galvanized steel floor in one piece - 3 mm thick galvanized steel plate Lighting equipment - LED lighting and lighting protection - Modern multifunctional lighting - with rear fog light - with reversing light - with front marker lights - 13-pin plug Wheels and axles - Combination suspension/wheel suspension system - Parabolic suspension incl. shock absorbers - Smooth ride comfort - 185/70R13C tires with black rims - Maintenance-free compact wheel bearings - with automatic reverse Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame according to DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: hapert Cobalt HM-2 3,05x1,80m 2700kg Dreiseitenkipper Handpumpe niedriges Fahrwerk, empty load weight: 824 kg, maximum load weight: 1,876 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, Hydraulics (tipping and lowering system) - Three-way tipper - Tipping angle 51 degrees rear, 45 degrees sideways - Powerful OMFB pump, centrally mounted and protected Rsdpfx Ash Ewxmsbzop - Double-stroke pump system - 4-stage hydraulic cylinder Dropside, railing and co. - Additional dropside hinges for more stability and pressure resistance - Three hinges at the front and five at the sides - Double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading ramps - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof multiplex floor - Finnish birch plywood, 11-ply waterproof press-glued - 15 mm thick Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - with LED front marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, functionality: fully functional, machine/vehicle number: Hapert Cobalt Plus Dreiachser 4,05×2,00×0,40m 3500kg Dreiseitenkipper, empty load weight: 1,458 kg, maximum load weight: 2,042 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 400 mm, loading space volume: 3.24 m³, Hydraulics (tipping and lowering system) - Electric three-way tipper - rear tipping angle 49 degrees, side 45 degrees - Battery charger - Large 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering via emergency hand pump possible - 12V battery and hydraulic unit protected in steel box - Removable tilt control unit with long spiral cable - 3-phase charge status display via tipper control unit - 7-pin socket mounted on the trailer with charging cable Drive-on package - in the frame, behind the license plate, integrated rail shaft - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection - Two sturdy crank supports, foldable by pulling mechanism - one hand crank with carrier Dropside, railing and co. - High front grille - Additional dropside hinges for more stability and pressure resistance - Three hinges at the front and six at the sides - Double-walled powder-coated aluminum drop sides, 40 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading rails - Low chassis - Towing ball coupling with safety indicator - Reinforced jockey wheel and reinforced jockey wheel bracket Loading area and floor - Galvanized steel floor in one piece - 3 mm thick galvanized steel plate Lighting equipment - LED lighting and lighting protection - Modern multifunctional lighting - with rear fog light - with reversing light - with front marker lights - 13-pin plug Wheels and axles - Combination suspension/wheel suspension system - Parabolic suspension incl. shock absorbers - Smooth ride comfort - 185/70R13C tires with black rims - Maintenance-free compact wheel bearings - with automatic reverse Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame according to DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved. Rodpfxevf Nvto Abzjp

Condition: new, machine/vehicle number: Hapert Cobalt HM-2 4,05×2,00m 3500kg elektrisch +Nothandpumpe +Parabelfeder, empty load weight: 1,182 kg, maximum load weight: 2,318 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, Installed accessories - Parabolic suspension incl. wheel shock absorbers - Drive-on package (ramp shaft, two aluminum ramps, two crank supports) - E-pump including emergency hand pump Hydraulics (tipping and lowering system) - Electric three-way tipper - rear tipping angle 49 degrees, side 45 degrees - Large 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering via emergency hand pump possible - 12V battery and hydraulic unit protected in steel box - Removable tilt control unit with long spiral cable - 3-phase charge status display via tipper control unit - 7-pin socket mounted on the trailer with charging cable Drive-on package - in the frame, behind the license plate, integrated rail shaft - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection - Two sturdy crank supports, foldable by pulling mechanism - one hand crank with carrier Dropside, railing and co. - additional dropside hinges for more stability and pressure resistance - Three hinges on the front and seven on the sides - double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading ramps - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof multiplex floor - Finnish birch plywood, 11-ply waterproof press-glued - 15 mm thick Rsdpfxsi Awa Ds Abzsp Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - with LED front marker lights - 13-pin plug Wheels and axles - Combination suspension/wheel suspension system - Parabolic suspension incl. shock absorbers - Smooth ride comfort - 195/50R13C tires with black rims - Maintenance-free compact wheel bearings - with automatic reverse Lashing and securing options - TÜV-certified load securing system from HAPERT - 8 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. Simply enter "Dapper trailer" in your search engine.

Condition: new, machine/vehicle number: Hapert Cobalt HM-2 3,05x1,80m 3000kg Dreiseitenkipper +E-Pumpe+Nothandpumpe+niedriges Fahrwerk, empty load weight: 837 kg, maximum load weight: 2,163 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, Equipment: tail-lift, uploader, Built-in accessories - E-pump including emergency hand pump - Drive-on package (ramp shaft, two aluminum ramps, two crank supports) Hydraulics (tipping and lowering system) - Electric three-way tipper - rear tipping angle 51 degrees, side 45 degrees - Large 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering via emergency hand pump possible - 12V battery and hydraulic unit protected in steel box - Removable tilt control unit with long spiral cable - 3-phase charge status display via tipper control unit - 7-pin socket mounted on the trailer with charging cable Rodpjh Ewuxsfx Abzep Drive-on package - in the frame, behind the license plate, integrated rail shaft - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection - Two sturdy crank supports, foldable by pulling mechanism - one hand crank with carrier Dropside, railing and co. - additional dropside hinges for more stability and pressure resistance - Three hinges at the front and five at the side - double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading ramps - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof multiplex floor - Finnish birch plywood, 11-ply waterproof press-glued - 15 mm thick Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - with LED front marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Cobalt Plus 3,35x1,80m 3500kg Dreiseitenkipper, empty load weight: 1,056 kg, maximum load weight: 2,444 kg, overall weight: 3,500 kg, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 400 mm, Hydraulics (tipping and lowering system) - Electric three-way tipper - rear tipping angle 55 degrees, side 45 degrees - Battery charger - Large 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering via emergency hand pump possible - 12V battery and hydraulic unit protected in steel box - Removable tilt control unit with long spiral cable - 3-phase charge status display via tipper control unit - 7-pin socket mounted on the trailer with charging cable Drive-on package - in the frame, behind the license plate, integrated rail shaft - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection - Two sturdy crank supports, foldable by pulling mechanism - one hand crank with carrier Dropside, railing and co. - High front grille - Additional dropside hinges for more stability and pressure resistance - Three hinges at the front and six at the sides - Double-walled powder-coated aluminum drop sides, 40 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading rails - Low chassis - Towing ball coupling with safety indicator - Reinforced jockey wheel and reinforced jockey wheel bracket Loading area and floor - Galvanized steel floor in one piece - 3 mm thick galvanized steel plate Lighting equipment - LED lighting and lighting protection - Modern multifunctional lighting - with rear fog light - with reversing light - with front marker lights - 13-pin plug Wheels and axles - Combination suspension/wheel suspension system - Parabolic suspension incl. shock absorbers - Smooth ride comfort - 185/70R13C tires with black rims - Maintenance-free compact wheel bearings - with automatic reverse Rsdpoh Ewxqsfx Abzsp Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, functionality: fully functional, machine/vehicle number: Hapert Cobalt HB-2 2,80x1,60x0,30m 2700kg Rückwärtskipper niedriges Fahrwerk, empty load weight: 657 kg, maximum load weight: 2,043 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,800 mm, loading space width: 1,600 mm, loading space height: 300 mm, loading space volume: 1.34 m³, suspension: other, tire size: 195/50R13C, number of cylinders: 3, operation weight: 657 kg, Equipment: tail-lift, trailer coupling, uploader, Hydraulics (tipping and lowering system) - Reverse tipper - Tipping angle 61 degrees - Powerful OMFB pump, centrally mounted and protected - Optimized pump system with double stroke - 3-stage hydraulic cylinder Dropside, railing and co. - double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action - Sturdy and durable hinges Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened roller - U-profile at the rear, for easier attachment of the ramps Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof screen-printed wooden floor - Finnish birch plywood, 11-ply waterproof press-bonded - 15 mm thick Lighting equipment Redpfx Ajuqqdfebzop - Modern multifunctional lighting - with rear fog light - with reversing light - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse function - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Cobalt HB-1 Rückwärtskipper 2,80x1,60m 1800 kg niedriges Fahwerk, empty load weight: 527 kg, maximum load weight: 1,273 kg, overall weight: 1,800 kg, axle configuration: 1 axle, loading space length: 2,800 mm, loading space width: 1,600 mm, loading space height: 300 mm, Hydraulics (tipping and lowering system) Redpfx Aei Awa Isbzep - Reverse tipper - Tipping angle 55 degrees - Powerful OMFB pump, centrally mounted and protected - Optimized pump system with double stroke - 3-stage hydraulic cylinder Dropside, railing and co. - double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action - Sturdy and durable hinges Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened roller - U-profile at the rear, for easier attachment of the ramps Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof screen-printed wooden floor - Finnish birch plywood, 11-ply waterproof press-bonded - 15 mm thick Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse function - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Cobalt HB-1 2,60x1,50m 1500kg Rückwärtskipper, empty load weight: 449 kg, maximum load weight: 1,051 kg, overall weight: 1,500 kg, loading space length: 2,600 mm, loading space width: 1,500 mm, loading space height: 300 mm, Equipment: uploader, Hydraulics (tipping and lowering system) - Reverse tipper - Tipping angle 50 degrees - Powerful OMFB pump, centrally mounted and protected - Optimized pump system with double stroke - 3-stage hydraulic cylinder Dropside, railing and co. - double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action - Sturdy and durable hinges Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened roller - U-profile at the rear, for easier attachment of the ramps Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof screen-printed wooden floor - Finnish birch plywood, 11-ply waterproof press-bonded - 15 mm thick Lighting equipment Rjdpfxei Ah Hlj Abzjp - Modern multifunctional lighting - with rear fog light - with reversing light - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse function - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Cobalt HB-1 2,60x1,50m 1800kg niedriges Fahrwerk, empty load weight: 527 kg, maximum load weight: 1,273 kg, overall weight: 1,800 kg, loading space length: 2,600 mm, loading space width: 1,500 mm, loading space height: 300 mm, Hydraulics (tipping and lowering system) - Reverse tipper - Tipping angle 50 degrees - Powerful OMFB pump, centrally mounted and protected - Optimized pump system with double stroke - 3-stage hydraulic cylinder Dropside, railing and co. - double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action - Sturdy and durable hinges Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened roller - U-profile at the rear, for easier attachment of the ramps Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof screen-printed wooden floor Rjdji Ah Hhopfx Abzsp - Finnish birch plywood, 11-ply waterproof press-bonded - 15 mm thick Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse function - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Sapphire L-1 3,00x1,50x1,50m 1500kg, empty load weight: 550 kg, maximum load weight: 950 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 1,500 mm, Structure - Choice of colors: grey or white coating on the outside - PPL-coated multiplex walls, 15 mm thick - Finnish birch plywood, 11-ply waterproof press-glued - Double-wing door with stainless steel espagnolette lock - Stainless steel fittings - Case body profiles made of anodized aluminium - Lockable with cylinder lock and can be secured with a padlock - Two maneuvering handles on the front Chassis and frame - Towing ball coupling with safety indicator - Chassis completely welded and fully galvanized - bolted V-drawbar - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - Continuous, non-slip and waterproof screen-printed wooden floor - 15 mm thick - Finnish birch plywood, 11-ply waterproof press-glued Lighting equipment - Interior lighting with rechargeable battery, removable, can be used as a flashlight - Modern multifunctional lighting - with reversing light - with rear fog light - with marker lights - 13-pin plug Rodei Awa Sspfx Abzsp Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Galvanized steel mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Sapphire L-2 3,00x1,50x1,80m 2000kg Kofferanhänger, empty load weight: 638 kg, maximum load weight: 1,362 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 1,800 mm, Structure - Choice of colors: grey or white coating on the outside - PPL-coated multiplex walls, 15 mm thick - Finnish birch plywood, 11-ply waterproof press-glued - Double-wing door with stainless steel espagnolette lock - Stainless steel fittings - Case body profiles made of anodized aluminium - Lockable with cylinder lock and can be secured with a padlock - Two maneuvering handles on the front Chassis and frame - Towing ball coupling with safety indicator - Chassis completely welded and fully galvanized - bolted V-drawbar - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - Continuous, non-slip and waterproof screen-printed wooden floor - 15 mm thick - Finnish birch plywood, 11-ply waterproof press-glued Lighting equipment - Interior lighting with rechargeable battery, removable, can be used as a flashlight - Modern multifunctional lighting - with reversing light - with rear fog light - with marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Galvanized steel mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT Redpfxoiif R Ie Abzjp - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.