Used Hapert Heavy Equipment Trailers for sale (192)

Condition: as good as new (ex-display), overall weight: 3,500 kg, loading space length: 4,550 mm, loading space width: 2,000 mm, loading space height: 300 mm, Large construction machinery transporter, low loader tandem for construction machines, excavators, platforms, scissor lifts, and many other vehicles. Hapert manufactures extremely robust car trailers such as this INDIGO HT-2 455x200cm. Dkjdey Au Nlepfx Akkjn The construction machinery trailer can be tilted and conveniently loaded via a very sturdy mesh ramp. An absolute universal trailer, suitable not only for construction equipment but also for transporting lawnmowers, tractors, pallets, bulk goods, and small vehicles. The high-loader car trailer can also be conveniently side-loaded. The machine transporter is equipped with a robust mesh ramp, hand hydraulics for tilting, winch with holder, lashing eyes with 1000kg load capacity, automatic jockey wheel, three-sided foldable aluminum side walls, an extremely durable welded and dip galvanized frame, and a V-drawbar.

Condition: new, 9935918 Tandem Tilt Trailer Manufacturer: Hapert Type: Azure H-2 Permissible total weight: 2700 kg Unladen weight: 529 kg Payload: approx. 2171 kg (payload specifications may vary depending on equipment and design) Internal dimensions: 3350 x 1800 x 400 mm L.W.H. Fully welded and hot-dip galvanized frame Low loading height of 640 mm due to 195/50 R 13 tires Multiplex floor with non-slip coating Tie-down loops integrated into the side edges Folding support wheel Bolted V-drawbar 4 removable corner posts 400 mm high aluminum side panels with integrated locking mechanisms Lighting protected and mounted in the frame Folding front panel Tie-down hooks on the chassis Including vehicle documents Possible additional options and accessories for this trailer: Djdezaxx Djpfx Akkskn Aluminum loading ramps integrated under the loading platform Rear supports Front grille for transporting long materials 100 km/h approval with wheel shock absorbers Lashing strips, anchor rails, additional load securing, locking bar, lashing straps, etc. Registration of your new trailer at the vehicle registration office

Condition: new, 9935920 Tandem tilt trailer Manufacturer: Hapert Type: Azure H-2 Permissible total weight: 3500 kg Unladen weight: approx. 653 kg Payload: approx. 2847 kg (payload specifications may vary depending on the equipment and design) Internal dimensions: 4050 x 2000 x 400 mm L.W.H. Fully welded and hot-dip galvanized frame Low loading height: 640 mm Multiplex floor with non-slip coating Tie-down eyes integrated into the side rails Folding support wheel Bolted V-drawbar 4 removable corner posts 400 mm high aluminum side walls with integrated locking mechanisms Front wall folds down Tie-down hooks on the chassis Tires 195/50R13 C with black rim Dsdpfx Aezaxv Ajkkekn Includes vehicle documents Possible additional options and accessories for this trailer: Aluminum loading ramps integrated under the loading platform Rear supports Front grille for transporting long materials 100 km/h approval with wheel shock absorbers Lashing strips, anchor rails, additional load securing, locking bar, tension straps, etc. Registration of your new trailer with the vehicle registration office

Condition: used, Year of construction: 2012, AZURE H-2 0010 Used Hapert car trailer 0020 Tires: 185/70 R13 Dksdpfx Aozbnvujkken 0030 Dimensions: 335 x 185 cm 0040 TÜV (German Technical Inspection Association) valid until: 06/2026

Condition: new, machine/vehicle number: Hapert Indigo HF-2 4,05x2,01m 3000kg +abgeschrägtes Heck, empty load weight: 696 kg, maximum load weight: 2,304 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,010 mm, loading space height: 80 mm, Dropside, railing and co. - 8 cm high Combi-Protect railing - Strong, adjustable winch with winch bracket Drive-on package - integrated rail shaft in the frame, behind the license plate - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection Chassis and frame - Chassis completely welded and fully galvanized - Low loading platform - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened castor - U-profile at the rear, for easier attachment of the loading rails Loading area and floor - Sloping rear side approx. 1.30 m - Drive-on angle 11° - Anti-slip and waterproof screen-printed wooden floor - 15 mm thick - Finnish birch plywood, 11-ply waterproof press-glued Lighting equipment - Modern multifunctional lighting - with reversing light - with rear fog light - with two LED front marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 14 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved. Dedpfxsi A D S Ds Akkekn

Condition: new, machine/vehicle number: Hapert Indigo LF-2 3,55×1,69m 3500kg niedriges Fahrwerk, empty load weight: 787 kg, maximum load weight: 2,713 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,540 mm, loading space width: 1,690 mm, loading space height: 195 mm, Drive-on tailgate - Full-length tailgate 1.20 m high - with support brackets - Optimized drive-on angle of 16 - Steel spring supported ramp, lifting aid - HAPERT locking system: robust locks with double action Chassis and frame - Low loading surface of 34 cm - Towing ball coupling with safety indicator - Chassis completely welded and fully galvanized - bolted V-drawbar - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - continuous, non-slip and waterproof screen-printed wooden floor - Finnish birch plywood, 11-ply waterproof press-glued - 15 mm thick - Footboard at the rear Lighting equipment - with reversing light - with rear fog light - with two LED front marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Robust, impact-resistant side edges with HAPERT Safety Steps - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 10 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Combi Protect Rail Dodpfoi A D S Ssx Akkskn Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Indigo HT-2 4,05×2,01m 3500kg, empty load weight: 820 kg, maximum load weight: 2,680 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,010 mm, loading space height: 300 mm, Equipment: uploader, Dropside, railing and co. - Combi-Protect railing ramp flap - Welded and hot-dip galvanized ramp - One meter high ramp - With gas pressure damper, lifting and lowering aid - Drive-on angle 13° Chassis and frame - Hydraulically tilting platform - Low loading platform - Towing ball coupling with safety indicator - Chassis completely welded and fully galvanized - Frame extra reinforced with two additional longitudinal beams. - V-drawbar Loading area and floor - Continuous, non-slip and waterproof screen-printed wooden floor Dsdpfx Aoi Td Nbskkekn - 15 mm thick - Finnish birch plywood, 11-ply waterproof press-glued Lighting equipment - Modern multifunctional lighting - with reversing light - with rear fog light - with two LED front marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - Maintenance-free compact wheel bearings - with automatic reverse - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 8 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet Further standard accessories - Adjustable winch bracket with cable winch - Height-adjustable Hapert automatic support wheel with hardened roller Documents and freight costs - Freight costs to us already included - incl. vehicle registration document (registration certificate part 2) - incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine.

Condition: new, machine/vehicle number: Hapert Indigo LF-2 3,05×1,59m 3500kg niedriges Fahrwerk, empty load weight: 762 kg, maximum load weight: 2,738 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,040 mm, loading space width: 1,590 mm, loading space height: 195 mm, Drive-on tailgate - Full-length tailgate 1.20 m high - with support brackets - Optimized drive-on angle of 16 - Steel spring supported ramp, lifting aid - HAPERT locking system: robust locks with double action Chassis and frame - Low loading surface of 34 cm - Towing ball coupling with safety indicator - Chassis completely welded and fully galvanized - bolted V-drawbar - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - continuous, non-slip and waterproof screen-printed wooden floor - Finnish birch plywood, 11-ply waterproof press-glued - 15 mm thick - Footboard at the rear Lighting equipment - with reversing light - with rear fog light - with two LED front marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Robust, impact-resistant side edges with HAPERT Safety Steps - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 10 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Combi Protect Rail Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Dsdpfx Akji A D Taskokn Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Indigo HT-2 5,05x2,21m 3500kg mit Bordwänden, empty load weight: 1,156 kg, maximum load weight: 2,344 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 5,050 mm, loading space width: 2,210 mm, loading space height: 300 mm, Dropside, railing and co. - 30 cm high aluminum drop sides, removable - Plug-in corner stanchions - HAPERT locking system: robust, recessed locks with double action Drive-on flap - Welded and hot-dip galvanized ramp - One meter high ramp - With gas pressure damper, lifting and lowering aid - Drive-on angle 10.5° Suspension option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Hydraulically tiltable platform - Low loading area - Towing ball coupling with safety indicator - Chassis completely welded and fully galvanized - Frame extra reinforced with two additional longitudinal beams. - V-drawbar Loading area and floor - Continuous, non-slip and waterproof screen-printed wooden floor - 15 mm thick - Finnish birch plywood, 11-ply waterproof press-glued Lighting equipment - Modern multifunctional lighting - with reversing light - with rear fog light - with two LED front marker lights - 13-pin plug Wheels and axles - Combination suspension/wheel suspension system - Parabolic suspension incl. shock absorbers - Smooth ride comfort - With automatic reverse - 195/50R13C tires with black rims - Maintenance-free compact wheel bearings Lashing and securing options - TÜV-certified load securing system from HAPERT - 12 recessed fastening brackets integrated in the frame in accordance with the DIN standard with 1000 dAN (kg) per eyelet Further standard accessories - Adjustable winch bracket with cable winch - Height-adjustable Hapert automatic support wheel with hardened roller Documents and freight costs - Freight costs to us already included Dedpfoh Ewxxex Akkekn - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Indigo LF-2 4,05×1,79m 3500kg, empty load weight: 859 kg, maximum load weight: 2,641 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 1,790 mm, loading space height: 195 mm, Drive-on tailgate - Full-length tailgate 1.20 m high - with support brackets - Optimized drive-on angle of 16 - Steel spring supported ramp, lifting aid - HAPERT locking system: robust locks with double action Chassis and frame - Low loading surface of 34 cm - Towing ball coupling with safety indicator - Chassis completely welded and fully galvanized - bolted V-drawbar - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - continuous, non-slip and waterproof screen-printed wooden floor - Finnish birch plywood, 11-ply waterproof press-glued - 15 mm thick - Footboard at the rear Lighting equipment - with reversing light - with rear fog light - with two LED front marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Robust, impact-resistant side edges with HAPERT Safety Steps - Equipped with splash guards - Wheel chocks with holder Lashing and securing options Dsdpoi A D S Iefx Akkskn - TÜV-certified load securing system from HAPERT - 10 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Combi Protect Rail Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: hapert Cobalt HM-2 3,05x1,80m 2700kg Dreiseitenkipper Handpumpe niedriges Fahrwerk, empty load weight: 824 kg, maximum load weight: 1,876 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, Hydraulics (tipping and lowering system) - Three-way tipper - Tipping angle 51 degrees rear, 45 degrees sideways - Powerful OMFB pump, centrally mounted and protected - Double-stroke pump system - 4-stage hydraulic cylinder Dropside, railing and co. - Additional dropside hinges for more stability and pressure resistance - Three hinges at the front and five at the sides - Double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading ramps - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof multiplex floor - Finnish birch plywood, 11-ply waterproof press-glued - 15 mm thick Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - with LED front marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings Dksdpfxjh Ewxmo Akkjn - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, functionality: fully functional, machine/vehicle number: Hapert Cobalt Plus Tandemachser 4,05×2,00×0,40m 3500kg Dreiseitenkipper, empty load weight: 1,316 kg, maximum load weight: 2,184 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 400 mm, loading space volume: 3.24 m³, Hydraulics (tipping and lowering system) - Electric three-way tipper - rear tipping angle 49 degrees, side 45 degrees - Battery charger - Large 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering via emergency hand pump possible - 12V battery and hydraulic unit protected in steel box - Removable tilt control unit with long spiral cable - 3-phase charge status display via tipper control unit - 7-pin socket mounted on the trailer with charging cable Drive-on package - in the frame, behind the license plate, integrated rail shaft - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection - Two sturdy crank supports, foldable by pulling mechanism - one hand crank with carrier Dropside, railing and co. - High front grille - Additional dropside hinges for more stability and pressure resistance - Three hinges at the front and six at the sides - Double-walled powder-coated aluminum drop sides, 40 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading rails - Low chassis - Towing ball coupling with safety indicator - Reinforced jockey wheel and reinforced jockey wheel bracket Loading area and floor - Galvanized steel floor in one piece - 3 mm thick galvanized steel plate Lighting equipment - LED lighting and lighting protection - Modern multifunctional lighting - with rear fog light - with reversing light - with front marker lights - 13-pin plug Wheels and axles - Combination suspension/wheel suspension system - Parabolic suspension incl. shock absorbers - Smooth ride comfort Dkjdpovf Nvmefx Akken - 185/70R13C tires with black rims - Maintenance-free compact wheel bearings - with automatic reverse Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame according to DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, functionality: fully functional, machine/vehicle number: Hapert Cobalt Plus Dreiachser 4,05×2,00×0,40m 3500kg Dreiseitenkipper, empty load weight: 1,458 kg, maximum load weight: 2,042 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 400 mm, loading space volume: 3.24 m³, Hydraulics (tipping and lowering system) - Electric three-way tipper - rear tipping angle 49 degrees, side 45 degrees - Battery charger - Large 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering via emergency hand pump possible - 12V battery and hydraulic unit protected in steel box - Removable tilt control unit with long spiral cable - 3-phase charge status display via tipper control unit - 7-pin socket mounted on the trailer with charging cable Drive-on package - in the frame, behind the license plate, integrated rail shaft - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection - Two sturdy crank supports, foldable by pulling mechanism - one hand crank with carrier Dropside, railing and co. - High front grille - Additional dropside hinges for more stability and pressure resistance - Three hinges at the front and six at the sides - Double-walled powder-coated aluminum drop sides, 40 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading rails - Low chassis - Towing ball coupling with safety indicator - Reinforced jockey wheel and reinforced jockey wheel bracket Loading area and floor - Galvanized steel floor in one piece - 3 mm thick galvanized steel plate Lighting equipment - LED lighting and lighting protection - Modern multifunctional lighting - with rear fog light - with reversing light - with front marker lights - 13-pin plug Wheels and axles - Combination suspension/wheel suspension system Dsdpsvf Nvtefx Akkekn - Parabolic suspension incl. shock absorbers - Smooth ride comfort - 185/70R13C tires with black rims - Maintenance-free compact wheel bearings - with automatic reverse Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame according to DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Cobalt HM-2 4,05×2,00m 3500kg elektrisch +Nothandpumpe +Parabelfeder, empty load weight: 1,182 kg, maximum load weight: 2,318 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, Installed accessories - Parabolic suspension incl. wheel shock absorbers - Drive-on package (ramp shaft, two aluminum ramps, two crank supports) - E-pump including emergency hand pump Hydraulics (tipping and lowering system) - Electric three-way tipper - rear tipping angle 49 degrees, side 45 degrees - Large 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering via emergency hand pump possible - 12V battery and hydraulic unit protected in steel box - Removable tilt control unit with long spiral cable - 3-phase charge status display via tipper control unit - 7-pin socket mounted on the trailer with charging cable Drive-on package - in the frame, behind the license plate, integrated rail shaft - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection - Two sturdy crank supports, foldable by pulling mechanism - one hand crank with carrier Dropside, railing and co. - additional dropside hinges for more stability and pressure resistance - Three hinges on the front and seven on the sides - double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading ramps - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof multiplex floor - Finnish birch plywood, 11-ply waterproof press-glued - 15 mm thick Dedpfx Aksi Awa Dskokn Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - with LED front marker lights - 13-pin plug Wheels and axles - Combination suspension/wheel suspension system - Parabolic suspension incl. shock absorbers - Smooth ride comfort - 195/50R13C tires with black rims - Maintenance-free compact wheel bearings - with automatic reverse Lashing and securing options - TÜV-certified load securing system from HAPERT - 8 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. Simply enter "Dapper trailer" in your search engine.

Condition: new, machine/vehicle number: Hapert Cobalt HM-2 3,05x1,80m 3000kg Dreiseitenkipper +E-Pumpe+Nothandpumpe+niedriges Fahrwerk, empty load weight: 837 kg, maximum load weight: 2,163 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, Equipment: tail-lift, uploader, Built-in accessories - E-pump including emergency hand pump - Drive-on package (ramp shaft, two aluminum ramps, two crank supports) Hydraulics (tipping and lowering system) - Electric three-way tipper - rear tipping angle 51 degrees, side 45 degrees - Large 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering via emergency hand pump possible - 12V battery and hydraulic unit protected in steel box - Removable tilt control unit with long spiral cable - 3-phase charge status display via tipper control unit - 7-pin socket mounted on the trailer with charging cable Drive-on package - in the frame, behind the license plate, integrated rail shaft - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection - Two sturdy crank supports, foldable by pulling mechanism - one hand crank with carrier Dropside, railing and co. - additional dropside hinges for more stability and pressure resistance - Three hinges at the front and five at the side - double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading ramps - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof multiplex floor - Finnish birch plywood, 11-ply waterproof press-glued - 15 mm thick Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - with LED front marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT Dodpfx Ash Ewuxjkkekn - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Cobalt HM-2 Ferro 3,75x1,80m 3500kg +Auffahrpaket +E-Pumpe + Nothandpumpe, empty load weight: 1,138 kg, maximum load weight: 2,362 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,750 mm, loading space width: 1,800 mm, loading space height: 300 mm, Installed accessories - Parabolic suspension incl. wheel shock absorbers - Drive-on package (ramp shaft, two aluminum ramps, two crank supports) - E-pump including emergency hand pump Hydraulics (tipping and lowering system) - Electric three-way tipper - rear tipping angle 53 degrees, side 45 degrees - Large 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering via emergency hand pump possible - 12V battery and hydraulic unit protected in steel box - Removable tilt control unit with long spiral cable - 3-phase charge status display via tipper control unit - 7-pin socket mounted on the trailer with charging cable Drive-on package - in the frame, behind the license plate, integrated rail shaft - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection - Two sturdy crank supports, foldable by pulling mechanism - one hand crank with carrier Dropside, railing and co. - additional dropside hinges for more stability and pressure resistance - three hinges at the front and six at the side - double-walled aluminum drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection Dkedpfxoh Ewyys Akken - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading rails - Low chassis - Drawbar coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened roller Loading area and floor - Galvanized steel floor in one piece - 3 mm thick galvanized steel plate Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - with front marker lights - 13-pin plug Wheels and axles - Combination suspension/wheel suspension system - Parabolic suspension incl. shock absorbers - Smooth ride comfort - 195/50R13C tires with black rims - Maintenance-free compact wheel bearings - with automatic reverse Lashing and securing options - TÜV-certified load securing system from HAPERT - 8 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Cobalt Plus 3,35x1,80m 3500kg Dreiseitenkipper, empty load weight: 1,056 kg, maximum load weight: 2,444 kg, overall weight: 3,500 kg, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 400 mm, Hydraulics (tipping and lowering system) - Electric three-way tipper - rear tipping angle 55 degrees, side 45 degrees - Battery charger - Large 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering via emergency hand pump possible - 12V battery and hydraulic unit protected in steel box - Removable tilt control unit with long spiral cable - 3-phase charge status display via tipper control unit - 7-pin socket mounted on the trailer with charging cable Drive-on package Dedpfx Aeh Ewxqekkekn - in the frame, behind the license plate, integrated rail shaft - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection - Two sturdy crank supports, foldable by pulling mechanism - one hand crank with carrier Dropside, railing and co. - High front grille - Additional dropside hinges for more stability and pressure resistance - Three hinges at the front and six at the sides - Double-walled powder-coated aluminum drop sides, 40 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading rails - Low chassis - Towing ball coupling with safety indicator - Reinforced jockey wheel and reinforced jockey wheel bracket Loading area and floor - Galvanized steel floor in one piece - 3 mm thick galvanized steel plate Lighting equipment - LED lighting and lighting protection - Modern multifunctional lighting - with rear fog light - with reversing light - with front marker lights - 13-pin plug Wheels and axles - Combination suspension/wheel suspension system - Parabolic suspension incl. shock absorbers - Smooth ride comfort - 185/70R13C tires with black rims - Maintenance-free compact wheel bearings - with automatic reverse Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, functionality: fully functional, machine/vehicle number: Hapert Cobalt HB-2 2,80x1,60x0,30m 2700kg Rückwärtskipper niedriges Fahrwerk, empty load weight: 657 kg, maximum load weight: 2,043 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,800 mm, loading space width: 1,600 mm, loading space height: 300 mm, loading space volume: 1.34 m³, suspension: other, tire size: 195/50R13C, number of cylinders: 3, operation weight: 657 kg, Equipment: tail-lift, trailer coupling, uploader, Hydraulics (tipping and lowering system) - Reverse tipper - Tipping angle 61 degrees - Powerful OMFB pump, centrally mounted and protected - Optimized pump system with double stroke - 3-stage hydraulic cylinder Dropside, railing and co. - double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action - Sturdy and durable hinges Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened roller - U-profile at the rear, for easier attachment of the ramps Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof screen-printed wooden floor - Finnish birch plywood, 11-ply waterproof press-bonded - 15 mm thick Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse function - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Dkedpfx Ajuqqdfjkksn Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Cobalt HB-1 2,60x1,50m 1500kg Rückwärtskipper, empty load weight: 449 kg, maximum load weight: 1,051 kg, overall weight: 1,500 kg, loading space length: 2,600 mm, loading space width: 1,500 mm, loading space height: 300 mm, Equipment: uploader, Hydraulics (tipping and lowering system) - Reverse tipper - Tipping angle 50 degrees - Powerful OMFB pump, centrally mounted and protected - Optimized pump system with double stroke - 3-stage hydraulic cylinder Dropside, railing and co. - double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action - Sturdy and durable hinges Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened roller - U-profile at the rear, for easier attachment of the ramps Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof screen-printed wooden floor - Finnish birch plywood, 11-ply waterproof press-bonded - 15 mm thick Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse function - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs Dkjdpfx Asi Ah Hlokksn - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Cobalt HB-1 2,60x1,50m 1800kg niedriges Fahrwerk, empty load weight: 527 kg, maximum load weight: 1,273 kg, overall weight: 1,800 kg, loading space length: 2,600 mm, loading space width: 1,500 mm, loading space height: 300 mm, Hydraulics (tipping and lowering system) - Reverse tipper - Tipping angle 50 degrees - Powerful OMFB pump, centrally mounted and protected - Optimized pump system with double stroke - 3-stage hydraulic cylinder Dropside, railing and co. - double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action - Sturdy and durable hinges Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened roller - U-profile at the rear, for easier attachment of the ramps Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof screen-printed wooden floor - Finnish birch plywood, 11-ply waterproof press-bonded - 15 mm thick Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse function - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Dksdpfxei Ah Hho Akkon Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Cobalt HB-1 Rückwärtskipper 2,80x1,60m 1800 kg niedriges Fahwerk, empty load weight: 527 kg, maximum load weight: 1,273 kg, overall weight: 1,800 kg, axle configuration: 1 axle, loading space length: 2,800 mm, loading space width: 1,600 mm, loading space height: 300 mm, Hydraulics (tipping and lowering system) - Reverse tipper - Tipping angle 55 degrees - Powerful OMFB pump, centrally mounted and protected - Optimized pump system with double stroke - 3-stage hydraulic cylinder Dropside, railing and co. - double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action - Sturdy and durable hinges Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened roller - U-profile at the rear, for easier attachment of the ramps Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof screen-printed wooden floor - Finnish birch plywood, 11-ply waterproof press-bonded - 15 mm thick Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse function - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included Dksdpfxoi Awa Io Akkjn - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, functionality: fully functional, machine/vehicle number: Hapert Cobalt HB-2 3,05x1,60x0,30m 2700kg Rückwärtskipper niedriges Fahrwerk, empty load weight: 675 kg, maximum load weight: 2,025 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,600 mm, loading space height: 300 mm, loading space volume: 1.46 m³, suspension: other, tire size: 195/50R13C, number of cylinders: 3, operation weight: 675 kg, Equipment: tail-lift, trailer coupling, uploader, Hydraulics (tipping and lowering system) - Reverse tipper - Tipping angle 61 degrees - Powerful OMFB pump, centrally mounted and protected - Optimized pump system with double stroke - 3-stage hydraulic cylinder Dropside, railing and co. - double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action - Sturdy and durable hinges Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened roller - U-profile at the rear, for easier attachment of the ramps Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof screen-printed wooden floor - Finnish birch plywood, 11-ply waterproof press-bonded - 15 mm thick Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - 13-pin plug Djdpfx Aourytxskkskn Wheels and axles - Robust rubber spring axle - with automatic reverse function - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Sapphire L-1 3,00x1,50x1,50m 1500kg, empty load weight: 550 kg, maximum load weight: 950 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 1,500 mm, Structure - Choice of colors: grey or white coating on the outside - PPL-coated multiplex walls, 15 mm thick - Finnish birch plywood, 11-ply waterproof press-glued - Double-wing door with stainless steel espagnolette lock Dksdsi Awa Sepfx Akkjn - Stainless steel fittings - Case body profiles made of anodized aluminium - Lockable with cylinder lock and can be secured with a padlock - Two maneuvering handles on the front Chassis and frame - Towing ball coupling with safety indicator - Chassis completely welded and fully galvanized - bolted V-drawbar - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - Continuous, non-slip and waterproof screen-printed wooden floor - 15 mm thick - Finnish birch plywood, 11-ply waterproof press-glued Lighting equipment - Interior lighting with rechargeable battery, removable, can be used as a flashlight - Modern multifunctional lighting - with reversing light - with rear fog light - with marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Galvanized steel mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Sapphire L-2 3,00x1,50x1,80m 2000kg Kofferanhänger, empty load weight: 638 kg, maximum load weight: 1,362 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 1,800 mm, Structure - Choice of colors: grey or white coating on the outside - PPL-coated multiplex walls, 15 mm thick - Finnish birch plywood, 11-ply waterproof press-glued - Double-wing door with stainless steel espagnolette lock - Stainless steel fittings - Case body profiles made of anodized aluminium - Lockable with cylinder lock and can be secured with a padlock - Two maneuvering handles on the front Chassis and frame - Towing ball coupling with safety indicator - Chassis completely welded and fully galvanized - bolted V-drawbar - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - Continuous, non-slip and waterproof screen-printed wooden floor - 15 mm thick - Finnish birch plywood, 11-ply waterproof press-glued Lighting equipment - Interior lighting with rechargeable battery, removable, can be used as a flashlight - Modern multifunctional lighting - with reversing light - with rear fog light - with marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Galvanized steel mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) Dkodpfx Aoiif R Iskksn - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: Hapert Sapphire L-1 2,50x1,30x1,50m 1350kg Koffer, empty load weight: 454 kg, maximum load weight: 896 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,300 mm, loading space height: 1,500 mm, Structure - Choice of colors: grey or white coating on the outside - PPL-coated multiplex walls, 15 mm thick - Finnish birch plywood, 11-ply waterproof press-glued - Double-wing door with stainless steel espagnolette lock - Stainless steel fittings - Case body profiles made of anodized aluminium - Lockable with cylinder lock and can be secured with a padlock - Two maneuvering handles on the front Chassis and frame - Towing ball coupling with safety indicator - Chassis completely welded and fully galvanized - bolted V-drawbar - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - Continuous, non-slip and waterproof screen-printed wooden floor - 15 mm thick - Finnish birch plywood, 11-ply waterproof press-glued Lighting equipment - Interior lighting with rechargeable battery, removable, can be used as a flashlight - Modern multifunctional lighting - with reversing light - with rear fog light - with marker lights - 13-pin plug Wheels and axles Dksdpjiif R Sofx Akkjn - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Galvanized steel mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.