Used Schwarzmüller Spa Semitrailers for sale (280)

Condition: new, maximum load weight: 30,540 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, loading space width: 2,550 mm, loading space height: 2,990 mm, total width: 2,550 mm, total height: 1,010 mm, Year of construction: 2025, Equipment: ABS, SCHWARZMÜLLER 3-AXLE FLATBED SEMITRAILER RH100 – EXTENDABLE – For Building Material and Construction Machinery Transport, NEW VEHICLE GVW (technical): 39 t Axle load (technical): 27 t Fifth wheel load (technical): 12 t Kerb weight approx. 9 t (+/- DIN tolerance) Flatbed length approx. 13,500 mm = front approx. 4,150 mm, rear approx. 9,350 mm Flatbed width approx. 2,540 mm Loading height front approx. 1,060 mm at kingpin height approx. 980 mm; rear 1,010 mm Extendable lightweight welded steel frame construction Extension length approx. 4,000 mm, lockable at intervals of approx. 500 mm Reinforced design for building material transport: 20 t/5m at the center of gravity, machinery transport up to 20 t (retracted) Reinforced U-profile outer frame 6 mm Tapered crossmembers 4 mm Rear frame bevel, approx. 15°, approx. 500 mm Psdpswfu N Rjfx Akyogl Visual indicator for pneumatic frame lock on both sides, with Green control lamp = indicator light for pneumatic frame lock at Front left of the trailer Energy drag chain in the central frame Frame lock with integrated grease strip 4 pairs of extendable 8 t lashing rings, rear 9 pairs of extendable 10 t lashing rings in the outer frame profile, foldable outwards on both sides for oversize securing 10 pairs of lashing mushrooms with welded round bar under the outer frame 6 pairs of insert pockets with reinforced brackets for box section stanchions 80x50x5 mm (longitudinal, approx. 3 mm clearance), on both sides of the outer frame 3 insert pocket cross-members for box section stanchions 80x80 mm, at central beams Insert pocket cross-members as empty holders for box section stanchions 6 pairs of recessed container locks for: 2 x 20 ft containers 1 x 20 ft container centered 2 x 20 ft containers 1 x 30 ft container Reinforced rear end plate with continuous rail for loading ramps Manual 2 x 12 t landing gear, single side operation + load equalizer 2 drop-down support feet at the rear SAF Intradisc B9 axles with disc brakes ø370 mm (19.5" disc), Load capacity 9 t/axle, on-road design Axle spacing 1,310 + 1,410 mm Wheelbase 7,650 mm Self-steering SAF trailing axle, approx. 10° steering angle, electrically pneumatic reverse lock activated automatically in reverse, additionally for cab switch with release valve Special axle lift on 1st axle, lifts/lowers automatically depending on weight, with forced lowering, starting aid button in cab / "3 x braking" Odometer 6x tires 435/50 R 19.5, 164J 6x steel rims 14.00 x 19.5 Braking system EU Directive 71/320 ECE R13 2-line air braking system, EBS 2S2M, one axle monitored RSS/RSP stability program Spring-actuated parking brake Steel air tanks Air suspension with lift/lower function, total stroke approx. 200 mm Automatic ride height at 15 km/h Quick release valves SWIT – Schwarzmüller Intelligent Telematics, service package “BASIC” Axle load display EBS-CAN bus signal Tire pressure monitoring per ECE Directive 141 35 mm wooden floor, laid lengthwise, steel chequer plate covers over wheels Wooden floor impregnated on both sides Reinforced steel front wall approx. 1,800 mm + center posts integrated in front wall 2 lashing eyes in upper corner posts Front steel corner posts integrated in front wall (full side loading length) 24-volt lighting system according to EU Directive 76/756/EEC 2 full LED multi-chamber tail lights “Aspöck” with integrated control unit Flashing LED side marker lights

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2016, Equipment: ABS, Visit our website, where you can find our complete vehicle inventory with many more photos and information available in several languages. SEL 8270 Schwarzmüller SJ Lift axle German registration / first owner First registration: 15/04/2016 Technical gross weight (kg): 39,000 Permissible total weight (kg): 36,000 Empty weight (kg): 7,100 VIN: VAVXSJ339GH371812 General inspection (HU): 08/2026 / Safety inspection (SP): 02/2026 TIRES AND AXLES: Tires: 235/75 R 17.5 Axle configuration: 3 axles, BPW 1st axle: lift axle Air suspension Drum brakes BODY: Internal dimensions: Height (m): 2.68 / 3.07 Width (m): 2.52 Length (m): 4.25 / 9.30 Pjdpfx Aksxz Nd Ssysgl OTHER SPECIFICATIONS: Portal doors Previous owner's reference deleted digitally VEHICLE DOCUMENTS: Registration certificate, vehicle title M. BUFANO (Italiano, English, Deutsch) J. CORDEIRO (Português, Español, Italiano, English) J. MARJANOVIC (Deutsch, Bosanski) L. OBODYNSKA (Ukrainian, Russian) We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Although every effort has been made to ensure the accuracy of the information, we do not accept liability for any errors or omissions. We kindly ask our customers to consult the available photos. The specified dimensions are approximate values. Our vehicles are sold in the AS-IS condition. We invite customers to visit our company to inspect the vehicle in person. Additionally, we offer the option of a test drive. Please note that the batteries supplied with the vehicle are those currently installed. If the customer would like new batteries, we are available to provide price information.

Condition: used, empty load weight: 5,480 kg, maximum load weight: 28,520 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 05/2021, suspension: air, tire size: 385/65 r22,5, Year of construction: 2021, Equipment: ABS, SCHWARZMÜLLER J-Series ∗ULTRALIGHT∗ Tautliner ∗ BOTH-SIDE LIFTING ROOF ∗! ∗∗LIKE NEW CONDITION∗∗ ===== ∗Lifting roof, can be hydraulically raised 400mm on both sides∗ Make: SCHWARZMÜLLER Model: J-Series First registration: 05/2021 Unladen weight: 5,480 kg Payload: 28,520 kg Gross weight: 34,000 kg Pgedpfx Aek Tu Ncokyol Technically permitted gross weight: 39,000 kg -- ULTRALIGHT, only 5,480 kg -- Lightweight chassis made of high-tensile fine-grained steel -- Lifting roof, 400mm lift on both sides, manual hydraulic operation -- Outer frame with perforations approx. every 100mm, suitable for tie-down points -- 12 pairs of recessed 2.5-ton lashing rings (12 per side) -- SAF Intradisc-B9 axles, disc brakes, 430 mm, 22.5" discs -- Lift axle -- ALCOA aluminum rims with MICHELIN tires ∗Like New∗ -- Aluminum air tanks -- Aluminum front wall -- Interior front wall with 2 lashing rings for load securing -- Front wall reinforced with 2 central supports -- Aluminum double doors -- Curtain tube on rear corner posts with tension ratchet -- Sliding curtain to Code XL standard, integrated horizontal and vertical webbing reinforcements -- Edscha sliding roof system / sliding cover -- Roof tarp, aramid-reinforced, translucent -- Partial LED five-chamber taillights "Europoint III" -- Front LED position lights -- Rear LED outline markers -- Galvanized underrun protection -- Side impact protection, black powder-coated -- Side reflective contour marking strips -- Rear reflective contour marking strips -- Individual wheel mudguards -- Retractable access ladder, right rear -- Air suspension -- Disc brakes -- SAF axles -- Lift axle -- Raise/lower valve -- ABS/EBS -- Aluminum portal doors with 4-point locking -- Aluminum front wall -- Access ladder at rear -- Stainless steel (NIRO) toolbox -- Spare wheel holder -- Tires: 385/65 R22.5 MICHELIN -- etc.... ..:: Please contact us prior to your visit, as the office is not always staffed ::.. Would you like to visit us? We offer a free pickup service from the train station in 4020 Linz. We handle all customs formalities for you. Trading in your used vehicle? If we reach an agreement, we are happy to accept it as part exchange. This offer is non-binding and subject to change. Errors and prior sale excepted.

Condition: used, maximum load weight: 27,580 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/2015, next inspection (TÜV): 09/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, Equipment: ABS, * Semi-trailer from first owner * TÜV valid until 9/26 Pgedpfx Asy Hngrjkyel * Sliding curtain left + right * Edscha roof * Portal doors * MB axles * Tyres 385/65R22.5 * Pallet box * Toolbox left * Spare wheel * Textile bar holders * Storage space in trailer floor * Fire extinguisher box * Information: * All information without guarantee – subject to prior sale.

Condition: used, maximum load weight: 31,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2020, next inspection (TÜV): 04/2026, loading space length: 13,376 mm, loading space width: 2,468 mm, loading space height: 2,753 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Schwarzmüller S1 J02VLN3 Moving Floor Walkingfloor 91 m³, 1st Lift Axle, Aluminium 21-plank 6 mm smooth floor, 13 lashing rings per side left and right, Permissible total weight: 39,000 kg, Unladen weight: 7,400 kg, Payload: 31,600 kg, Coupling height unladen: 1,160 mm, Pgjdpfx Akoyvwtteyel Hydraulic connection at the front wall, Cable remote control, SAF axles, 1st lift axle, Air suspension, Disc brakes, Portal doors, each with one external rotating rod lock per door wing, Pneumatically operated safety lock on the rear doors, Side and rear underrun protection, 2x crank supports, Access ladder at rear right, Residual discharge moving wall, Storage box on the left, Metal bumpers, Standing platform at the front wall with maximum tread width, railing, and access for roll tarp operation, Aluminium 21-plank 6 mm smooth floor, Roll tarp, Load protection tarp, 1x positioning ladder, Holder for shovel and broom, Air coupling head (red + yellow), 2x 7-pin plug connectors, 1x 15-pin plug connector, 2x hydraulic couplings, 3x hoops, 3x aluminium clamping beams, 13 lashing rings per side left and right, Knorr brake system, ABS, EBS, ALB, DIN EN 12642 Code XL, Wheelbase: 6,500 + 1,300 + 1,300 mm, Loading area LxWxH (up to tarp): 13,376 x 2,468 x 2,753 mm, External dimensions LxWxH: 13,950 x 2,550 x 4,000 mm, Rear upper crossbar pivoting, Clear loading height at rear with crossbar closed: 2,641 mm, Foldable protective cover for lighting on lamp carrier, Spare wheel holder, Tyres: 385/65R22.5 on steel rims, Tyre tread depth left front: 4 mm, Tyre tread depth left centre: 4 mm, Tyre tread depth left rear: 4 mm, Tyre tread depth right front: 4 mm, Tyre tread depth right centre: 3 mm, Tyre tread depth right rear: 8 mm, Additional Equipment: Axle load monitoring via Canbus STATT, Hydraulic connections: 2-line hydraulic system, connections between support legs, pressure left, return right; 2-line hydraulic system, connections at the front wall, pressure right, return left, 4,500 mm maximum distance from the tractor's front edge to the fifth wheel centre, 2,240 mm minimum clear front distance from fifth wheel centre, 1,900 mm maximum rear swing radius, Internal length approx. 13,500 mm (without dividing wall), Internal width approx. 2,470 mm, Loading volume approx. 91 m³ (without dividing wall), Internal loading height front approx. 2,680 mm, Internal loading height rear approx. 2,780 mm, Rear entry height approx. 2,630 mm, Total height unladen front approx. 4,000 mm, Total height unladen rear approx. 3,990 mm, Coupling height unladen approx. 1,160 mm, Loading height front approx. 1,320 mm, Loading height rear approx. 1,220 mm, Welded aluminium frame construction, Short lightweight chassis up to the support legs, Frame height front approx. 150 mm, SAF Intradisc B9 axles with disc brakes Ø430 mm (22.5" disc), load capacity 9 t/axle, reinforced axle bodies, offroad version, Axle spacing 1,310 + 1,310 mm, Lift axle on 1st axle, lifts and lowers automatically depending on weight, with forced lowering and speed-limited drive-off assistance for button operation in the cab and operation by “3 x braking”, RSS – roll stability program, Spring-loaded parking brake on 2 axles, Aluminium air tanks, Air suspension with raise/lower facility, total lift approx. 200 mm, Moving floor body: Aluminium construction from hollow profiles 30/3/2.5 mm, profile width 600 mm, with upper stabilising frame, side with integrated track for dividing wall, re

Condition: used, maximum load weight: 13,700 kg, overall weight: 18,000 kg, first registration: 12/2010, loading space length: 7,300 mm, loading space width: 2,450 mm, loading space height: 2,700 mm, Equipment: ABS, Schwarzmüller Trailer First registration: 12/2010 Payload: 13,500 kg Sliding tarpaulin left & right Edtscha sliding roof cover Mercedes axles Air suspension Disc brakes German vehicle TÜV (roadworthiness test) renewed on request Delivery available Pedpsy Hgf Hofx Akysgl ----German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran german/english/p?????/?????..... Roman We are happy to assist with your financing or leasing. EU sale: net price upon submission of company documents and VAT number VAT deposit €2,000 Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer to Munich airport or Passau train station

Condition: used, maximum load weight: 13,700 kg, overall weight: 18,000 kg, first registration: 10/2009, loading space length: 7,300 mm, loading space width: 2,450 mm, loading space height: 2,700 mm, Equipment: ABS, Schwarzmüller Trailer First Registration: 10/2009 Payload: 13,700 kg Sliding curtain left & right Pedoy Hgf Tepfx Akyjgl Edtscha sliding roof cover Mercedes axles Air suspension Disc brakes German vehicle New TÜV (technical inspection) available on request Delivery possible ----German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran German/English/Polish/?????..... Roman We are happy to assist with your financing or leasing needs. EU Sales: Net pricing provided upon submission of company documents and VAT Number VAT deposit €2,000 Our services for you: - Customs plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich airport or Passau train station

Condition: used, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2015, loading space length: 710 mm, loading space width: 250 mm, Equipment: ABS,

Condition: used, maximum load weight: 32,550 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2016, next inspection (TÜV): 02/2026, Equipment: ABS,

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, suspension: steel, Year of construction: 2019, 40-ton low-loader with ramps – extensions – hooks for securing machinery – total weight 40,000 kg – unladen weight 8,200 kg – 1st to 2nd axle = 1,410 mm 2nd to 3rd axle = 4,530 mm 3rd to 4th axle = 1,410 mm = Further Information = Suspension: Leaf spring suspension Front axle 1: Steered Front axle 2: Steered Unladen weight: 8,200 kg Payload: 31,800 kg Gross vehicle weight: 40,000 kg Reference number: 48 Please contact Miguel Cubas for further information. Podpfx Aoym Aluskysgl = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: used, axle configuration: 3 axles, first registration: 08/2018, next inspection (TÜV): 08/2026, Year of construction: 2018, Equipment: ABS, Schwarzmüller Light Pallet Box SAF Axles TÜV 08/26 At a glance: · First registration: 14.08.2018 · Year of construction: 2018 · Color: Blue · Unladen weight: 5.0 kg · Tires: 385/65 R 22.5 · Note: Immediately available Pgsdpfxoy E Em He Akyel Special equipment: Closed pallet box, SAF axles, Light version, XL certificate, lashing eyes, 2 toolboxes, 4 rows of slats, spare wheel carrier with spare wheel, 2x7 + 1x15-pin E-connection, Jost landing legs, document box, customs cord, ADR plate, A-plate. Standard equipment: 3 axles, disc brakes, ABS, EBS, lift and lowering valve, reinforced front wall, tail rear access ladder, underrun protection. Errors, typographical mistakes and prior sale excepted. The seller reserves the right to withdraw from sale. _____ Internal reference number for inquiries: TR26140 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Sales contacts: Mr. Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: also WhatsApp t: @: Mr. Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / also WhatsApp t: -104 @: Mr. Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / also WhatsApp t: -123 @: We speak 13 languages. Certainly yours too. Contact us! Homepage: Facebook: Instagram: Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks, and vans. Michael Doblhofer (German, English) p: also WhatsApp t: -102 @: Bastian Wagner (German, English) p: WhatsApp t: -103 @:

Condition: used, maximum load weight: 31,050 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 06/2016, next inspection (TÜV): 06/2026, loading space length: 9,500 mm, loading space width: 2,500 mm, loading space height: 900 mm, total width: 2,550 mm, total height: 3,650 mm, Equipment: ABS, * Schwarzmüller 4-Axle Low Loader with 2-piece hydraulic folding ramps - high-coupling with 50 mm towing eye - * Air suspension - BPW axles - disc brakes - Tyres: 245/70R17.5 Podoy Dy Enjpfx Akyjgl * Overall length: 11,900 mm - Width: 2,500 mm (3,000 mm possible) - Height: 3,650 mm * Gross vehicle weight: 40,000 kg - Unladen weight: 8,950 kg - Payload: 31,050 kg * German vehicle - German registration documents - immediately available - from first owner * The left rear hydraulic support needs to be repaired * Viewing by appointment only * Contact: Mr. Andreas Vogel * The information provided online is non-binding and for description purposes only. * These do not constitute guaranteed characteristics. * The seller accepts no liability for typographical or data transmission errors. * Subject to alterations, errors and prior sale.

Condition: used, Year of construction: 2023, color: green, loading space volume: 11 m³, loading space width: 2,420 mm, loading space length: 5,100 mm, loading space height: 900 mm, mileage: 1,001 km, first registration: 01/2023, gearing type: other, driver cabin: other, Vehicle location: Bovenden, swing doors. Body: roll-off container with foldable aluminium side walls, approx. 11m³, total container length approx. 5800mm! The roll-off frame is from 2023 and the Schwarzmüller body is considerably older. The exact year of manufacture cannot be determined, as there is no type plate present! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to change, prior sale, and errors excepted! Pgjdpfx Akey Dvdtsysl

Condition: used, empty load weight: 3,660 kg, maximum load weight: 14,340 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2012, next inspection (TÜV): 12/2025, suspension: air, tire size: 235/75R17.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axles, BPW axles, air suspension, ABS (anti-lock braking system), container lock, U-protection, side aluminum driving protection, twin tires, storage box Construction: 2-axle roll-off trailer for transporting containers up to 7m, 2x 9t BPW axles, drum brakes! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - . Pedevy Uz Rjpfx Akysgl

Condition: excellent (used), functionality: fully functional, machine/vehicle number: VAVJS1339PH522406, empty load weight: 8,520 kg, maximum load weight: 30,480 kg, overall weight: 39,000 kg, first registration: 01/2024, loading space length: 13,500 mm, suspension: air, tire size: 385/55 R22.5, color: yellow, Year of construction: 2024, Equipment: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE BUILDING MATERIAL FLATBED SEMITRAILER RH230 – forced-steered Vehicle ID No.: VAVJS1339PH522406 Mileage: 7,700 km - Weights Gross weight (technical): 39 t Axle aggregate load (technical): 27 t Fifth wheel load (technical): 12 t DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Overall width max. 2,550 mm Loading height front approx. 230 mm above ASH = approx. 1,360 mm Unladen fifth wheel height approx. 1,130 mm CHASSIS - Welded steel frame construction - Reinforced for 20 t point load over 4 m loading length - Frame height at front approx. 230 mm - 2" interchangeable king pin - Frame for unladen fifth wheel height approx. 1,120 mm – approx. 1,200 mm with air-suspended tractor unit - Outer frame with 4 mm perforated plate, hole center spacing approx. 100 mm, elongated hole 50/30 mm, for lashing of 3.5 t per lashing point - 10 pairs of 5 t lashing rings, recessed in floor, foldable, can also be folded outwards - 8 pairs of square tube sockets with plug-in mounting for square tube stanchions 80x80 mm, both sides of outer frame - 6 square tube sockets with plug-in mounts for 80x80 mm square tube stanchions, positioned transversely across the full width, max. pulling force 2,000 daN AXLES - BPW EcoDisc axles with disc brakes Ø430 mm (22.5" disc) - Load capacity 9 t/axle, on-road version - 1st axle fixed - 2nd and 3rd axles fitted with turntable installation for forced steering STEERING - Forced steering "Tridec TR" on two turntable-guided axles, for heavy-duty applications - Automatic forced steering, front fifth wheel plate with steering wedge - Power transmitted via two steering rods, rear axles with turntable installation - Central lubrication points for steering at the front fifth wheel plate and rear turntable - Axle lift on 1st axle, lifts and lowers automatically depending on weight, start-up aid with speed limitation BRAKING SYSTEM / SUSPENSION - EBS system 2S2M, one axle sensored - RSS/RSP – stability program - Spring-actuated parking brake on 2 axles - Aluminium air tanks - Brake/air connectors with Quattromatic quick coupling - EBS/ABS socket at the front - Air suspension with lift/lower function, total travel approx. 200 mm - Automatic adjustment to programmed driving level above 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for in-cab display - Wabco SmartBoard for data reading via display (mileage, axle aggregate load, brake diagnostics, etc.) FLOOR - Phenolic plywood floor 27 mm with steel hat profile rails over longitudinal beams - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminium forklift guard strip bolted on both sides of outer frame - Aluminium forklift guard strip screwed transversely at rear - Enclosed SPECIAL steel toolbox by Schoch, black coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, load capacity approx. 1 t, asymmetrical with doors on both sides - Galvanized steel toolbox / Monochrome painted lid - 8 removable hardwood crossbeams approx. 100/100 mm with steel edging, fixable in plug-in sockets in outer frame Pjdpfxsxq S H Is Akyogl Very good condition, German registration documents, immediately available.

Condition: used, maximum load weight: 29,340 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 07/2026, loading space length: 7,700 mm, loading space width: 2,300 mm, loading space height: 1,470 mm, loading space volume: 26 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, THERMO steel semi-circular tipper body approx. 26 cbm, HYVA tipping cylinder, roll tarp, front drop-down supports, ABS, EBS, BPW axle(s), disc brake system, air suspension with lift/lower function, 1st and 3rd axle – lift axle, SmartBoard, automatic lowering of air suspension when tipping. Vehicle may have advertising stickers and/or lettering. SI86716 Our offer generally does not include a new roadworthiness inspection (TÜV). If a new inspection is desired, we are happy to provide a quote from our partner workshops! Vehicle may have advertising stickers and/or lettering. Our general terms and conditions for delivery and payment apply. We are glad to provide you with a financing or leasing offer for this unit. Pgedpfxjyu Epfo Akyel Please contact us!

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2021, Equipment: ABS, Vehicle Identification No.: VAVKSK339MZ477050 Automatic tarpaulin roof - Marcolin German inspection (HU) due Unladen weight: 6,020 kg Bed dimensions: 7,600 x 2,330 x 1,650 mm Volume: approx. 28 m³ SAF axles with drum brakes AXLE 1 + 3 = LIFT AXLE WabcoSmartControl Crank-operated landing legs - aluminium External pendulum tailgate Adjustable underrun protection Tyres: 385/65 R 22.5 Pgedpsxv Ndzefx Akysl Aluminium wheels Subject to change, prior sale, and errors excepted. The description serves for general vehicle identification and does not constitute a warranty in the legal sense. The terms as stated in the purchase contract are decisive. Our offer is generally without new TÜV approval. If a new TÜV approval is required, we are happy to provide a quote from our partner workshops! Vehicle may be stickered and/or labeled with advertisements. Our general terms and conditions of delivery and payment apply.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2021, Equipment: ABS, Vehicle ID no.: VAVKSK339MZ477054 Automatic tarpaulin - Marcolin German MOT valid until 10/2026 - Safety Inspection until 04/2026 Unladen weight: 6,020 kg Tipping body dimensions: 7,600 x 2,330 x 1,650 mm Volume: approx. 28 m³ SAF axles with drum brakes Axle 1 + 3 = lift axles WabcoSmartControl Crank support legs - aluminium External pendulum tailgate Adjustable underrun protection Tyres: 385/65 R 22.5 Aluminium wheels Pgsdpfxsx A Nwnj Akyel Modifications, interim sale, and errors are explicitly reserved. The description serves general vehicle identification and does not constitute a warranty in the legal sense of purchase law. The description in the sales contract is decisive. Our offer is generally without a new MOT inspection. If a new inspection is desired, we are happy to provide a quote from our partner workshops! The vehicle may display or bear advertising decals and/or graphics. Our general terms and conditions of delivery and payment apply.

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Weights: * Gross vehicle weight (permissible): 24 t * Gross vehicle weight (technical): 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, beveled corners approx. 5,350 mm = lowbed platform – flat loading area approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm) * Loaded loading height approx. 870 mm * When assembling trains, the legally permissible overall height and total train length must be observed! Chassis: * Steel welded construction with front gooseneck and rear bevel * Ramp slope with central excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the lowbed, 1x on the raised platform) * 7 pairs of recessed, retractable approx. 10 t lashing rings (4x in the lowbed, 1x on the ramp slope, 2x on the raised platform) * Standard ball-bearing turntable Chassis attachments: * Lowbed platform can be extended on both sides with approx. 50 mm softwood boards (track width of machines to be transported must not exceed the external frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform between the longitudinal beams, 1 pair at the very back in the bucket recess left and right, 1 pair at the front on the raised platform in front of the gooseneck between the longitudinal beams, 1 pair at the rear of the lowbed in front of the ramp slope in the bucket recess left and right Drawbar: * Fixed drawbar with swivel eye approx. 40 + 50 mm, cranked design, silent bushing mounting, drawbar retaining spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support system: * 2 automatic folding supports at the rear Axles: * SAF air suspension low-bed axles with drum brakes, axle load capacity 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand according to manufacturer’s selection Brake system/Suspension: * Brake system compliant with ECE regulation R13 * Dual-line compressed air brake system * Wabco make, EBS system 4S3M, sensors on 1st and 2nd axle * RSS/RSP – stability program * Spring-actuated parking brake on 2nd and 3rd axle * Brake/air connection lines with 2 individual couplings (yellow/red) Pedpfsy Aug Rsx Akysgl * EBS/ABS connection cable * Air suspension with lift and lower function (rear axles only), automatic ride height adjustment from 15 km/h (RTR), with axle stop on front axle Assistance/Safety systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS Canbus signal for display in the cab (truck must be properly prepared; not a calibrated scale) * Tire pressure monitoring according to ECE regulation 141, with pressure sensor in the wheels, for display in cab (display must be present in tractor unit) Flooring: * Approx. 50 mm impregnated softwood floor, protruding approx. 5–10 mm above the top of the frame * Steel chequer plate cover above the wheels Ramps: * 2 foldable, single-piece lightweight steel loading ramps, length approx. 2,800 mm, width approx. 750 mm, with approx. 35 mm impregnated hardwood floor * Ramps adjustable

Condition: new, maximum load weight: 30,860 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available upon request. Chassis: * Steel welded construction with front neck, front corners chamfered and rear taper, drive-on ramp with central excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed retractable approx. 10 t lashing rings (2x on the raised platform, 1x in the front neck slope, 3x in the low bed between the wheel recesses, and 1x in the entry ramp) 2 pairs of wheel recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located in front after the neck with one-piece drive-over aluminium cover, for max. surface load approx. 11,650 daN/piece * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between the 3rd and 4th axle with one-piece drive-over aluminium cover, suitable for the transport of wheel loaders with wheelbase approx. 2,700 - 3,600 mm and wheel diameter approx. 1,485 - 1,740 mm, maximum rear wheel loader overhang 2,220 mm * Width between the wheel recesses approx. 1,255 mm (outer/outer longitudinal beams) Chassis attachments: * 5 pairs of stake pockets in the outer frame for box section posts approx. 100 x 50 x 5 mm (3x in the low bed and 2x on the raised platform) * Extensions with softwood planks approx. 50 mm, extendable on both sides of the low bed platform (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distribution: 1 pair front on the raised platform, inside the longitudinal beams, 1 pair fully at the rear in the excavator bucket recess left and right, 1 pair front on the raised platform before the neck, inside the longitudinal beams, 1 pair rear in the low bed before the drive-on slope, in the excavator bucket recess left and right Drawgear: * Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked design, with silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Support equipment: * 2 hydraulic rear supports - operated individually, controls installed in separate stainless steel box underneath Axles: * SAF air-suspended low loader axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic slack adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, make Conti HTR2 (tyre load capacity approx. 12 t / axle) Brake system/Suspension: * Brake system per ECE directive R13, dual-line pneumatic brake system * Brake system make Wabco EBS system 4S3M, 1st + 3rd axles with sensors * RSS/RSP – stability program * Spring-actuated parking brake on 3rd + 4th axle Pedpoy Auhnsfx Akyogl * Aluminium air tanks for gross weight 44 t * Brake/air connection lines with 2 single coupling heads yellow/red * EBS/ABS connection cable * Tensioning rubber as holder for EBS and electrical plug * Air suspension with lift/lowering facility, operated separately front and rear * Automatic leveling to programmed driving height from 15 km/h Assistance/Safety systems: * SWIT - Schwarzmüller Intelligent Telematics Floor: * Softwood floor approx. 50 mm, impregnated, protruding approx. 5 - 10 mm above frame upper edge * Steel chequer plate cover over rear wheels

Condition: used, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 05/2017, loading space length: 5,100 mm, loading space width: 2,400 mm, loading space height: 1,000 mm, Year of construction: 2017, Equipment: ABS, Schwarzmüller tandem 3-way tipper with side-mounted roll tarp, air suspension, steel side walls, disc brakes, very well-maintained condition from first owner, used only for bulk materials. Contact person: Mr. Hinz Email: hv. WhatsApp: Pgjdpey D E Ibjfx Akyol

Condition: used, empty load weight: 5,350 kg, maximum load weight: 30,650 kg, first registration: 05/2014, next inspection (TÜV): 04/2025, total width: 25,500 mm, suspension: air, tire size: 385 / 65 R 22.5 / 5mm, front tire size: 385 / 65 R 22.5 / 5mm, operation weight: 36,000 kg,

Condition: used, empty load weight: 5,650 kg, maximum load weight: 30,350 kg, first registration: 11/2013, next inspection (TÜV): 12/2024, total width: 25,500 mm, suspension: air, tire size: 385 / 65 R 22.5 / 5mm, front tire size: 385 / 65 R 22.5 / 5mm, operation weight: 36,000 kg,

Condition: used, empty load weight: 5,600 kg, maximum load weight: 30,400 kg, first registration: 01/2014, next inspection (TÜV): 12/2024, total width: 25,500 mm, suspension: air, tire size: 385 / 65 R 22.5 / 8mm, front tire size: 385 / 65 R 22.5 / 8mm, operation weight: 36,000 kg,

Condition: used, empty load weight: 5,350 kg, maximum load weight: 29,650 kg, first registration: 07/2010, next inspection (TÜV): 05/2025, total width: 25,500 mm, suspension: air, tire size: 385 / 65 R 22.5 / 5mm, front tire size: 385 / 65 R 22.5 / 5mm, operation weight: 35,000 kg,