Used Fliegl Trailer for sale (24,305)

Condition: new, maximum load weight: 30,310 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Total weight 40,000 kg Payload 30,310 kg Empty weight 9,690 kg Total length 12,000 mm Loading length 10,000 mm Loading bed 7,150 mm including 850 mm approach slope Loading height 900 mm 1st pair of wheel recesses after offset in the loading bed, bottom length approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the loading bed, bottom length 600 mm, 300 mm deep Extensions to 3,000 mm, warning signs, rotating beacon, large lashing package Ijdonzlg Djpfx Anksia 5 pairs of stake pockets in the outer frame Excavator arm recess 1,800 mm long, 150 mm deep Drawbar 50 mm Air suspension with lifting and lowering valve, can be operated separately BPW drum brakes Tires 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Ramps 2,800 mm x 750 mm with hydraulic actuation Hydraulic side shift Rent-purchase offer: term 48 months, residual value 40%, down payment only VAT on the rental rates, monthly rate EUR 970.00 net Vehicle will be available from September 11th, 2023 from the Neumünster trade fair. Visit us at Nordbau - Stand West 121 right next to the main entrance. Other 3, 4 and 5 axle low loaders new and used available immediately

Condition: new, maximum load weight: 31,100 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 10,410 mm, loading space width: 2,500 mm, loading space height: 900 mm, total width: 2,520 mm, Total weight: 24,000kg/40,000kg Empty weight: 8,900kg Payload: 15,100kg/31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm offset, 7,920mm loading bed including rear bevel Width: 2,520mm Loading height: 900mm Iedsrducpjpfx Ankjia Further information plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 €/net Steel welded construction Turntable with strong ball bearing ring Foldable rear support Wheel chocks with holder Aluminum side impact protection Rear splash guards across the entire width (not in conjunction with forklift bracket) Half-shell mudguards 1st + 2nd axle with anti-spray splash guards behind each axle, Anti-spray flaps in front of and behind the 3rd and 4th axle Excavator arm recess above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes each 5 tons. in the excavator arm recess on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear bevel 1 plastic tool box, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in the floor on a crank with lid, W=720 mm/ L=520 mm / D= 170 mm Extensions extendable to 3,000 mm (not in the rear bevel) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width 2,550 mm) Storage compartment for wooden planks below the low-loading area Wooden planks 70 mm for widening to 3,000 mm Lashing eyes for low-loader 1 pair of lashing cutouts in the longitudinal beam at the front on a crank, 10 tons each. 4 pairs of lashing holes in the outer frame, each with 5 tons (tension belt attachment) 9 pairs of lashing mushrooms, embedded in the outer frame at the top and sides, each with 10 tons 2 x at the front on the bend 7 x in the low bed First lashing eye 250 mm from the front and last max. 250 mm from the back, distance between the lashing eyes not greater than 1100 mm 3 additional pairs of folding lashing eyes, each with 10 tons 1 x on the bend (sticks out) 1 x at the beginning of the low bed, embedded inside on the longitudinal beams 1 x embedded in the floor behind the last axle Towbar with tested 50 mm towing eye Towbar height adjustment via spring Axles + suspension Drum brake axles, as selected by the manufacturer "Laser-measured axle/chassis" Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free Steel-rubber bearings and mechanical axle load compensation at the front and rear (rocker compensation) Wheels and tires 235 / 75 R 17.5" at the manufacturer's discretion Steel rims in twin arrangement, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 interchangeable coupling heads at the front, with connecting lines to the towing vehicle, 24 volt ABS and ALB, with ABS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrics 12-24 volts, multi-chamber LED lights, yellow LED lighting on the side, license plate lighting in LED, (Note! Incorrect diagnoses can occur with certain towing vehicles, although the function is present) 2 white position lights at the front in LED 2 white/red lane keeping lights at the rear in LED 2 x 7-pin, interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (light removable) 2 pairs of warning signs with double LED lighting and extendable

Condition: new, machine/vehicle number: 7383bc2b7f580f0cb319b52f7, empty load weight: 5,400 kg, maximum load weight: 33,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,960 mm, suspension: air, tire size: 385/65 R 22.5, Further information Chassis: Semi-Trailer Tipper Fine-grained steel welded construction, lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front end, patented Telescopic support centrally mounted, uncoupling when loaded not possible; when uncoupled, the vehicle must be positioned tilted toward the rear. Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard holders with stone-repellent surface Iisdsi Rix Iepfx Anksa Splash guards behind the last axle, asphalt version, hinged to the mudguard, with hanging option at top of mudguard, mudguard shortened Tow hook at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment reduces tire wear and fuel consumption Axles in off-road version Air suspension 1st axle: automatic lift axle, including forced lowering and traction assistance Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty Brake System 2-line compressed air brake system, color-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be towed by tractors that ensure effective ABS function! With lift & lower valve Vehicle driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System compliant with ECE R 141, display via tractor head unit through EBS, not installed in truck (must be prepped in truck, only for basic tire set) Electrics 24 volt system, multi-chamber lights, yellow LED side lighting Yellow LED side lights linked to indicator – "flashing side marker lights" 2 white position lights at front 2 white/red lane marking lights at rear 2 x 7-pin fail-safe sockets at front, without connection cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body Steel round body in Stone Master design made from highly wear-resistant HB 400/450 steel. Slanted front wall with external hydraulic components and access steps at the front wall. Membrane rear wall Rear wall as pendulum flap, externally mounted with double hook lock. 2 clamping bolts with T-locks on the lower sides. Side walls throughout 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized design Body insulated design, Fliegl Asphalt Profi Thermo, insulated at front, side, bottom and rear with Fliegl Isotherm. Cover: BASIC, tarpaulin side cover Standing platform with access, connection plate for air/electric and brake with large space for optimal operation. Side roll tarp, stowed to the right side, central locking on left Approval/Country/License Plates Germany Type approval per EG 2007/46 Body strength per EN 12642 24/7 service hotline Manufacturer certificate for thermal vehicles as per RS 10 - 2013 Prepared for single-line license plate holder Warning panel per ECE 70 Paintwork Frame: DB 7350 novagrau (new gray) "10-year anti-corrosion warranty" Support legs: galvanized Body/Side tarp: RAL color as desired, single-color Roll tarp: RAL 7035 light gray Thermal insulation also available in BASICplus (sheet metal cover) and Premium (stainless steel cover)!

Condition: new, machine/vehicle number: 7d479432c7290a73a46ff6365, empty load weight: 5,000 kg, maximum load weight: 34,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,960 mm, suspension: air, tire size: 385/65 R 22.5, Further Information Chassis: Semi-trailer Tipper Fine-grain steel welded construction in basic lightweight design, fifth wheel plate with replaceable 2" kingpin Patent-protected curved front end Central telescopic landing leg, uncoupling while loaded not possible, when uncoupled vehicle must be parked at a backward angle Wheel chocks with holders Foldable underrun protection Half-shell fenders Integrated fender bracket with stone-repellent surface Tarp rod with bracket Tow hook at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis for reduced tire wear and lower fuel consumption Axles in off-road version Air suspension 1st axle is a lift axle with automatic lowering function and traction aid Hot-dip galvanized lift axle mechanism – 10 years warranty against rust-through Iodpfxji Ri Dps Anksia Braking System 2-line compressed air brake system, color-coded line routing for easy servicing Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, no connecting cable included Note: The trailer may only be towed by tractor units that ensure ABS function! With lift & lower valve Vehicle stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System per ECE R 141, display via tractor unit and EBS, without truck installation (prerequisite must be met in the truck, applies to standard tires only) Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting Side yellow LED lighting linked with indicators (“flashing side marker lights”) 2 x 7-pin swap-proof sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (no hose connection) Operated hydraulically via truck PTO Body Steel round trough in Stone Master design made from highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic system and ladder on the front wall Greenline – conical and aerodynamic trough design Shovel and broom holder outside on the front wall Membrane tailgate Tailgate as swing door with double hinge, external mounting with double hook locking. 2 clamp screws with toggle fasteners at lower sides Side walls continuous 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized structure Standing platform with ladder, connection plate for air/electrics and brakes with generous space for easy operation Roll tarp, stows to the right (FR-right), with central locking on FR-left Country of Registration/Plates Germany Homologation according to EC 2007/46 Superstructure strength according to EN 12642 24/7-Service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Chassis: DB 7350 Nova Grey "10-year warranty against rust-through" Support legs: galvanized Trough: RAL of choice, single-color Roll tarp: RAL 7035 light grey

Condition: new, machine/vehicle number: 74dd481d88dffaf9218e6ee58, empty load weight: 5,200 kg, maximum load weight: 33,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65 R 22,5, Further information Chassis Semi-trailer Tipper Fine-grain steel welded construction in basic lightweight design, fifth wheel plate with replaceable 2" kingpin. Curved front end, patented. Central telescopic support leg; unhitching with load is not possible, and when unhitched, the vehicle must be parked on a rearward slope. Wheel chocks with holder. Folding underrun protection. Half-shell mudguards. Integrated mudguard holder with stone-repellent surface. Tarp pole with holder. Tow hook at the rear. Axles & Suspension SAF disc brake axles with 430 mm disc diameter. Axle/chassis laser alignment reduces tire wear and fuel consumption. Axles in off-road configuration. Air suspension. 1st axle lift axle, automatic, including forced lowering and starting aid. Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through. Brake system 2-line compressed air brake system, color-coded line routing for easy service. Spring-loaded parking brake. 2 fool-proof coupling heads at the front, without connecting line. Iodpji Ri A Iofx Ankeia EBS (Electronic Braking System) with EBS socket at the front, without connection cable. Note: The trailer may only be towed by vehicles that guarantee the effectiveness of the ABS! With lift & lower valve. Vehicle stability control system. Wheels and tires 385/65 R22.5. Steel rims, factory silver. TPMS (Tire Pressure Monitoring System) according to ECE R 141, display via truck dashboard over EBS system, not installed in the trailer (prerequisite: must be available in the truck; applies to basic tires only). Electrics 24 Volt, multi-chamber tail lights, lateral yellow LED lighting. Side yellow LED lights linked to turn signal (“flashing side marker lights”). 2 white front position lamps. 2 white/red lane control lights rear. 2 x 7-pole fool-proof sockets at the front, without connection cable. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed section, NW 48 mm (without hose connection). Operated hydraulically via truck PTO. Bodies Steel round tipping body in Stone Master design made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic system and ladder at the front wall. Greenline – conical and aerodynamic body shape. Shovel and broom holder externally on front wall. Membrane Rear Wall Rear wall as pendulum flap with double-joint hinge, externally mounted with dual hook lock. 2 clamping screws with wing nut locks at lower sides. Side walls are 4 mm thick throughout, floor 4/5 mm thick; wear- and weight-optimized design. Standing platform with ladder, connection plate for air/electrics and brake with ample space for optimum operation. Roll tarp with stowage to passenger side (FR-right), with central locking on driver’s side (FR-left). Approval country/plates Germany Type approval per EC 2007/46 Body strength per EN 12642 24/7 service hotline Prepared for single-line registration plate holder Warning plate per ECE – 70 Outline marking with reflective tape according to ECE R 048, side white, rear red. Paintwork Frame: DB 7350 Novagrau '10-year warranty against corrosion' Support feet: galvanized Body: RAL of choice, single color Roll tarp: RAL 7035 light grey

Condition: new, machine/vehicle number: 637ca014c140e4e48dc3231a0, empty load weight: 5,700 kg, maximum load weight: 33,300 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,700 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 31 m³, total length: 9,090 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65 R 22,5, Further Information Chassis: Semi-Trailer Tipper Fine grain steel welded construction in basic lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front end, patented design 24t 2-speed landing gear, single-sided operation, with straight lower section, without load compensation Wheel chocks with holders Foldable underrun protection Half-shell mudguards Integrated mudguard holder with stone-repellent surface With anti-spray mudflaps on the rearmost axle only Tarp support bar with bracket Tow hook at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment for reduced tire wear and fuel consumption Air suspension 1st axle: automatic lift axle including forced lowering and start-up aid Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty Braking System 2-line compressed air brake system, color-coded piping for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without interconnecting lines EBS – Electronic Braking System, with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure ABS functionality! With lift & lower valve Vehicle – Driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver TPMS "Tire Pressure Monitoring System" per ECE R 141, display via the towing vehicle (via EBS, without separate truck installation; availability must be provided in the truck; applies to standard tire fitment only) Electrics 24 V, multi-chamber lights, yellow side LED lighting Iiodji Rivdjpfx Ankea Yellow side LED lighting linked to indicators "Flashing side markers" 2 x 7-pin fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chromed, with HDK screw coupler, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Tipper Body Steel round body in "Stone Master Design" made of high abrasion resistant HB 400/450 steel. Slanted front wall with external hydraulic cylinder mounting. Internal ladder at front wall. Greenline – conical and aerodynamic body shape Shovel and broom holders on exterior front wall. Membrane tailgate Tailgate as pendulum flap with double-joint hinge, externally mounted with double hook locking. 2 clamping screws with hand levers at lower sides. Sidewalls continuous 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized construction. Standing platform with steps, connection plate for air/electrics and brakes with ample free space for optimum handling. Roll tarp stowed on right side (FR-right), with central locking on left (FR-left) Country of Registration / Signs Germany Approval according to EC 2007/46 Body strength per EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on sides and red at rear Paintwork Chassis: DB 7350 Nova Grey "10 years anti-corrosion warranty" Landing legs: Black coated Body: RAL of choice, single color Roll tarp: RAL 7035 light grey

Condition: new, machine/vehicle number: 8b1f4087611d72661dc0b3869, empty load weight: 4,750 kg, maximum load weight: 30,250 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, Further information Chassis Semi-Tipper Fine-grained steel welded construction in basic lightweight design, kingpin plate with replaceable 2-inch kingpin Curved front end (patented) 24t 2-speed landing gear, single-sided operation, with straight base, without thrust compensation Foldable underrun protection Half-shell mudguards Tow hook at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axles in off-road specification Air suspension 1st axle automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10 years warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy service Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at front (no connecting cable included) Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver TPMS (Tire Pressure Monitoring System) according to ECE R 141, display via the tractor display, via EBS, without truck installation (prerequisite must be met in the truck. Only for standard tires) Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lights coupled with turn signal "flashing side marker lights" 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Tipping Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic unit and access at the front wall Greenline - conical and aerodynamic body shape Shovel and broom holder outside on the front wall Membrane rear wall Rear wall as pendulum flap with double-joint hinge, external with double hook locking. 2 clamping screws with wing latches at the lower sides Side walls 4 mm thick throughout, floor 4/5 mm thick, wear and weight-optimized construction Standing platform with access, connection plate for air/electricity and brake with large clearance for best possible operability Roll tarp stored to the right, with central locking on the left Country of Registration/Plates Germany With Dekra inspection and report (according to §13 EC-FGV) Body strength according to EN 12642 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau (Nova grey) 10 years warranty against rust-through Landing legs black coated Body in desired RAL color, single color Roll tarp in desired RAL color, single color Iisdpfsi Ri Nfjx Ankea Available with thermal insulation version!

Condition: new, machine/vehicle number: 2f960ff7c44de83fd060ec5df, empty load weight: 6,750 kg, maximum load weight: 32,250 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space width: 2,480 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,670 mm, suspension: air, tire size: 385/65 R 22,5, Further information Chassis Tipper Semi-Trailer Fine-grain steel welded construction, in Basic lightweight design, fifth wheel plate with replaceable 2" king pin Patented curved front wall 24 t, 2-speed landing gear, single-sided operation, with straight base, without sliding compensation Wheel chocks with holders Foldable underride guard Half-shell mudguards Integrated mudguard bracket with stone-repellent surface Tarpaulin pole with holder Tow hook at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10 years warranty against rust-through Brake system 2-line air brake system with color-coded line layout for easy service Spring-loaded parking brake 2 interchangeable coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via towing vehicle display through EBS, without truck installation (must be pre-equipped on the truck. Only applies to standard tires). Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting combined with indicator function 'blinking side markers' 2 x 7-pin interchangeable sockets at front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body/Tipper body Steel box body made of highly wear-resistant HB 400 steel, inclined front wall with external hydraulic cylinder mount. Shovel and broom holder outside on front wall. Interior with climb access on the front wall. Continuous 3 mm side walls, 3 mm continuous floor Membrane tailgate Internal width at bottom approx. 1440 mm Aluminum tailgate with 'double joint hinge', split 1/2 to 1/2, with swing arm at top, each leaf equipped with a grain chute. Standing platform with access, connection plate for air/electric and brake with large clearance for optimal handling. Roll tarp stored on right side, central locking on left side Registration country/plates Germany Approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE - 70 Contour marking stripes according to ECE R 048, side white and rear red Paintwork Frame: DB 7350 Nova Gray Iijdpfx Ansi Rizfjksa '10-year warranty against rust-through' Body: RAL of choice, single color Roll tarp: RAL 7035 light gray

Condition: new, machine/vehicle number: 113bec9dd54d24fa34a088424, empty load weight: 4,400 kg, maximum load weight: 28,600 kg, overall weight: 33,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,400 mm, suspension: air, tire size: 385/65 R 22,5, Further information Chassis, Semi-Tipper Fine-grain steel welded construction in lightweight design; fifth wheel plate with replaceable 2-inch kingpin Patented curved front wall 24 t two-speed landing gear, single-sided operation, with straight lower part, without load compensation 2 wheel chocks with holders Folding underrun protection Half-shell mudguards Tarp bar with holder 2 rear towing hooks Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axles in off-road version Air suspension 1st axle with automatic lift axle function, including forced lowering and traction aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake System 2-line air brake system, color-coded piping for easier servicing Spring-actuated parking brake 2 anti-mistake coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With raise and lower valve Vehicle stability system Wheels and Tires 385/65 R22.5, brand at manufacturer’s discretion Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display through towing vehicle dashboard via EBS, does not include truck installation (Truck must be equipped accordingly; applies only to standard tire fitment). Ijdpfx Ansi Riziekoia Electrical System 24 Volt, multi-chamber tail lights, side-mounted amber LED lighting Side amber LED lighting linked to indicators ("flashing side marker lights") 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin anti-mistake sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest section hard-chromed, with HDK screw coupling, fixed part, nominal width 48 mm (without hose connection) Operated hydraulically via truck PTO Body Aluminum box body, high-quality, wear-resistant; front wall 5 mm thick, with external end walls made from 30 mm hollow chamber profiles, neatly welded, with spill-resistant top rail profile. Interior includes ladder on the front wall (not in combination with Cramaro cover system). External shovel and broom holder on front wall Greenline – conical and aerodynamic body shape Membrane – tailgate Tailgate as pendulum flap with double-joint hinge, externally mounted with double hook lock Tailgate with rubber seal (note: heat resistant up to max. 170°C!) Continuous floor, 6 mm thick Standing platform with ladder, connection plate for air/electric and brake with ample space for optimal operation Roll tarp, stowable on right side, with central lock on left side Registration Country/Plates Germany With Dekra certificate and inspection report (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides, red at rear Paintwork Frame: DB 7350 Novagrau "10-year warranty against rust-through" Body: Single color as desired (RAL) Roll tarp: RAL 7035 light grey

Condition: new, machine/vehicle number: aaa375d3c15c697ac80fb51f9, empty load weight: 7,900 kg, maximum load weight: 31,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space width: 2,330 mm, loading space height: 1,950 mm, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,470 mm, suspension: air, tire size: 385/65 R 22,5, Further information Chassis Semi-trailer Tipper Fine-grain steel welded construction, lightweight design, with slight offset, fifth wheel plate with replaceable 2" kingpin 24-ton 2-speed landing gear, single-sided operation, with straight lower section, without sliding compensation Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard holders with stone-repellent surface Tarp rod with holder Tow hook at the rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axles and running gear laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism with 10-year warranty against rust-through Braking System 2-line compressed air brake system with color-coded hoses for easy maintenance Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, without connector line EBS (Electronic Braking System) with EBS socket at the front, without connector cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle – driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via tractor dashboard (via EBS, without truck installation — vehicle must support this; only for standard tires) Electrics 24 volt, multi-chamber tail lights, side yellow LED lighting Side yellow LED lighting linked to indicators – flashing side marker lights 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connector cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Hydraulic actuation via truck PTO Body Steel half-pipe body made of highly abrasion-resistant HB 400 steel, inclined front wall with external hydraulic cylinder mount. Folding aluminium splash guard on front right for tarpaulin. Shovel and broom holder mounted on exterior of front wall. Access inside at the front wall. Side walls continuous 4 mm thick, floor continuous 5 mm thick Membrane-type rear wall Rear wall with 2-leaf door division 1/2 to 1/2, with 1 slider in the right leaf With external locking bar and mechanical bottom lock Standing platform with access ladder, connection plate for air/electric and brake with ample space for optimal handling Tarpaulin rolls to right side (FR-right), with central locking on FR-left Registration country/License plates Germany Type approval according to EC 2007/46 Body strength in compliance with EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE - 70 Contour marking with reflective tape according to ECE R 048, side white and rear red Iisdji Rizqspfx Anksa Painting Frame: DB 7350 Nova Grey 10-year warranty against rust-through Landing legs: black coated Body: RAL as requested, single color Tarpaulin: RAL 7035 light grey

Condition: new, machine/vehicle number: 4499ca1b286f9f653066b5693, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: 385/65 R 22.5, Further Information Chassis Semitrailer Tipper Fine-grained steel welded construction in basic lightweight design, kingpin plate with exchangeable 2'' kingpin Patented curved front wall 24t two-speed landing gear, single-sided operation, with straight base section, without thrust compensation Foldable underrun protection Half-shell mudguards Towing hook at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-measured to reduce tire wear and fuel consumption Axles in off-road configuration Air suspension 1st axle with automatic lift axle function, including forced lowering and traction aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake System 2-line compressed air braking system with color-coded line routing for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front, without interconnecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With raise/lower valve Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System compliant with ECE R 141, display via truck dashboard through EBS, without truck installation (the system must be pre-equipped in the truck; only on standard tires) Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights Yellow LED side marker lights linked with indicator – "flashing side marker lights" 2x 7-pin foolproof sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (no hose connection included) Operated hydraulically via truck PTO Body Steel round trough in Stone Master design made from highly wear-resistant HB 400/450 steel. Slanted bulkhead with external hydraulic components and ladder at the bulkhead. Greenline: conical and aerodynamic trough shape Shovel and broom holder outside on the bulkhead Membrane – Tailgate Tailgate as swinging door with double hinge, externally mounted, with dual hook locking. 2 clamping screws with T-handle locks at the bottom sides. Side walls throughout 4 mm thick, floor 4/5 mm thick, wear and weight-optimized design Standing platform with ladder, connection plates for air/electric and brake lines with ample space for optimal operation Roll tarp stows to right-hand side, with central locking on the left-hand side Iedpfx Aei Ri Nionkjia Registration / Licences Country: Germany With DEKRA approval and certification (according to §13 EG - FGV) Body strength per EN 12642 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective striping per ECE R 048, white at sides, red at rear Painting Frame: DB 7350 Nova Gray 10-year warranty against rust-through Support legs: black coated Trough in RAL color of choice, single color, subject to availability Roll tarp in RAL color of choice, single color Also available with hydraulic tailgate.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2012, Equipment: ABS, *Tautliner Isdpfxjypa Ewj Ankjia *Through-loading system *Tyres 385/65R22.5 *3 rows of aluminium slats *Air suspension with ride height control All information provided without guarantee!

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,540 mm, total height: 1,250 mm, Equipment: ABS, WEB Trailer PRSH 27 NEW | Flatbed Semi-Trailer | Hardwood Floor | Container-Compatible | for €30,500 !!! New vehicle – customized configuration available to suit your application. Robust flatbed semi-trailer with hardwood floor for a wide range of transport tasks. Suitable for container transport (20 ft / 40 ft) as well as conventional general cargo and machinery transport. --- Highlights --- • Flatbed trailer with 27 mm hardwood floor • Container-compatible: 1×40 ft / 1×20 ft (centered) / 2×20 ft • Single tires R22.5 • High lashing forces – certified lashing points • Lift axle with start-assist function • Durable WEB-Trailer quality for daily use --- Technical Data --- • Chassis length: approx. 13,510 mm • Chassis width: approx. 2,540 mm • Ride height unladen: approx. 1,250 mm (at 1,120 mm fifth-wheel height) • Max. kingpin load: approx. 16,000 kg • Axles: 3 × 9,000 kg, disc brakes • Axle spacing: 1,310 / 1,310 mm • Tires: 385/65 R22.5 --- Standard Equipment --- • Crossmembers IPE 80, spacing approx. 400 mm Iiedpfxjypa Ilj Anksa • Outer frame U-profile 160×120×5 mm • Lashing bars top & bottom every 1,200 mm, certified (5 t) • 8 pairs of stake pockets 80×50 mm • 6 pairs of container locks (twistlocks) • Front wall 1,200 mm, sheet metal paneling • Holder for plug-in stanchions on the front wall • 24 t telescopic landing gear • EBS braking system • 1st axle lift axle, automatic, with start-assist function • LED lighting system 24 V, 15-pin • Rear underrun protection, rectangular tubing • Rear access ladder with platform --- Floor & Cargo Securing --- • 27 mm hardwood floor in omega profiles • Weatherproof floor for open flatbeds • Certified forklift axle load 9.0 t according to DIN EN 283 • Comprehensive lashing options for flexible cargo securing --- Included Options --- • Extending red/white warning boards (rear & landing gear) • Large bent lamp bracket • Open toolbox made of perforated sheet metal • License plate lighting & track marker lamps • Front wall painted in RAL 9006 silver • Chassis MB 7350 nova gray • KTL coating with zinc phosphating + powder Further equipment and custom modifications available upon request. We configure your vehicle precisely to your specifications. Sample photo. Equipment may vary depending on configuration.

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, Equipment: ABS, WEB Trailer WF/W 22.5 NEW – Swap Body Chassis | from €17,500!!! New vehicle – can be individually configured for your application. Swap body chassis for professional use with 7,150–7,450 mm swap bodies. Robust design with air-suspended running gear and high-quality corrosion protection. --- Highlights • Swap body chassis for symmetrical swap bodies 7,150–7,450 mm • 2 cantilevers + 4 retractable twistlock fasteners (20 t) • Rear-aligned support 7,150 mm (including impact buffers) • Air-suspended bogie with low-maintenance ball bearing slewing ring • Extendable tow bar Iedsypazrspfx Anksia • Hot-dip galvanized chassis for maximum longevity --- Technical Data • Unladen ride height: approx. 1,240 mm • Stand height: approx. 1,220–1,320 mm • Coupling height unladen: approx. 850 mm • Total air suspension travel: approx. 180 mm • Axle load: 9,000 kg • Tyres: 385/65 R22.5 • Drawbar eye: Ø 40 mm (for turntable trailer) --- Standard Equipment • Chassis for swap bodies 7,150–7,450 mm • Foldable, adjustable front stop • Bogie with air suspension & ball bearing slewing ring (90 mm) • Height adjustment via tension springs (e.g., with extendable tow bar) • Extendable tow bar 6 × 100 • Light/brake connection lines on the right side of the tow bar • EBS brake system (Knorr or Wabco) incl. Roll Stability Program • Lift/lower valve on the left in the direction of travel • Steel air tanks 2 × approx. 80 l • Side underrun protection on both sides • LED lighting according to EU regulations --- Inclusive Options • Hot-dip galvanized chassis (without topcoat) • Hot-dip galvanized tow bar (as per customer specification) • Lamp carrier galvanized & painted in RAL 9005 • Prepped for E-spare wheel carrier (winch version) • Free choice of axle brand (SAF / BPW / JOST) • Branded tyres of choice WEB Trailer • Red/yellow coupling heads • COC documents via System Trailers --- Other features and individual adaptations possible at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, Equipment: ABS, WEB Trailer WF/W-18 NEW ? Swap Body Trailer | for €19,500 !!! New vehicle ? Custom configurable to your specific application. Swap body trailer for symmetrical swap bodies measuring 7,150 to 7,450 mm. Low center of gravity, air-suspended chassis, and hot-dip galvanized frame for professional distribution and intermodal operations. ----Highlights ? Swap body chassis for 7,150–7,450 mm ? 18 t axle load (2 × 9 t) ? Very low ride height ? 2 outriggers + 4 retractable twist-locks (20 t) ? Air-suspended bogie with low-maintenance ball bearing turntable ? Extendable drawbar ? Hot-dip galvanized frame for maximum corrosion protection ----Technical data ? Unladen ride height: approx. 1,050 mm ? Unladen coupling height: approx. 720 mm ? Support height: approx. 1,020–1,320 mm ? Underride height: approx. 1,000 mm ? Axle loads: 18,000 kg (2 × 9,000 kg) ? Spring center: approx. 1,300 mm Iisdpeypa Hnefx Ankja ? Drawbar swivel angle: ±3° ? Tyres: 445/45 R19.5 ----Standard equipment ? Chassis for swap bodies 7,150–7,450 mm ? Folding & adjustable front stop ? Air suspension bogie incl. ball bearing turntable (90 mm) ? Height adjustment via tension springs ? Stepless extendable drawbar (approx. 600 mm) ? Towing eye Ø 40 mm (for turntable trailers) ? EBS brake system (Knorr or WABCO) incl. Roll Stability Program ? Lift and lower control left side in direction of travel ? Steel air reservoirs, painted ? Side underride protection on both sides ? LED lighting 24 V with multifunction lamps ----Included options ? Hot-dip galvanized chassis (without top coat) ? Galvanized drawbar (per customer spec) ? Ready for e-spare wheel holder (winch version) ? Free choice of axle brand (SAF / BPW / JOST) ? Branded tyres 445/45 R19.5 M+S ? Lamp carrier painted RAL 9016 traffic white ? Wheels painted aluminum/silver (similar to RAL 9006) ? Lane departure & side marker lamps in LED ? COC papers provided by System Trailers ----Further options and customizations available — we configure your vehicle precisely to your requirements. Sample photo. Equipment may vary depending on configuration.

Condition: used, maximum load weight: 31,410 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, total width: 2,550 mm, Year of construction: 2020, Equipment: ABS, You can find our entire vehicle stock with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete equipment details available upon request. - 3 SAF axles - Disc brakes - 1st axle with automatic lift axle - Air suspension - 24 t, 2-speed landing gear, single side operation - Rear extension ladder - Plastic toolbox with drawer and shelf - 2-line air brake system, EBS/ABS - 385/55 R22.5 tires - Cargo Floor moving floor, approx. 10 mm floor profile Iodpfx Asw Tpr Uenkjia - Rear wall made of aluminum hollow profiles, double-winged door - LED work lights - Frame painted in DB 7350 Novagrau - Body painted in RAL 7035 light grey - Rolling tarp similar to RAL 3002 carmine red

Condition: used, maximum load weight: 33,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2018, next inspection (TÜV): 02/2026, Equipment: ABS, Fliegl SDS 390 curtain side trailer, BPW axles, air suspension, height adjustment, lift axle, EBS, ABS Iisdpfxox A Rkpo Ankea Next inspection 02/26 Trailer has been in an accident. Fully operational. Tarp is damaged.

Condition: new, * IMMEDIATE AVAILABILITY * Latest BJT model, upgradeable with numerous options: including hydraulic tilting function, additional ramps, and more. Technical Data: • Brand: Brian James • Model: Race Sport MY2025 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Not yet registered • TÜV/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 550 x 210 x 199 cm • External dimensions (LxWxH): 715 x 250 x 253 cm • Loading height (floor): 48 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,445 kg • Payload: 2,055 kg • Chassis: Low loader (wheels positioned beside body) • Tyres: 155/70R12 • Suspension: ALKO rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofit possible DESCRIPTION • Black superstructure made from high-quality, glass fibre-reinforced plastic. Lightweight yet extremely robust • Full-length daylight roof • Manoeuvring handles front and rear • Dual front hatch doors facilitate lashing of the front wheels • Large, lockable side flaps on both left and right for easy access • Full-height, full-width locking rear loading ramp with internal rotary-bar lock • Rollers at the rear for easy loading • Internal height: 1990 mm; rear entry height: 1880 mm • Perforated steel lashing floor offers superior slip resistance and is extremely wear-resistant, even under the toughest working conditions • Numerous lashing points and a highly durable floor allow for flexible securing options and optimal grip • Closed multiplex floor panel • Electric winch, 12V with cabled remote control. 2,250 kg pulling force, with roller fairlead, winch cable, and snap hook. Powered by on-board battery • Very robust welded steel frame • Frame completely hot-dip galvanized • Spare wheel with bracket mounted • Reinforced, heavy-duty V-drawbar • AL-KO overrunning device and parking brake • Automatic reversing mechanism • Cast steel coupling head with integrated high-security AL-KO lock • Plastic mudguards • 13-pin plug • Reversing lights • Large-format safety lighting • Integrated rear fog lamp • Multiple marker lights, front, side, and rear • Heavy-duty jockey wheel • 5-year chassis warranty Accessories retrofit available—please inquire! New vehicle with warranty and TÜV. Iodpsx Tcfcsfx Ankjia - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or export/temporary registration plates (Germany) can be provided - Export plates including customs declaration available Descriptions and images are copyright protected!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been an authorized dealer and service workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, omissions, and prior sale excepted -

Condition: new, * IMMEDIATELY AVAILABLE * Includes pendulum tailgate / Tridem / Double hydraulics / Steel side panels TECHNICAL DATA • Brand: Brian James • Model: Tipper 526 • Vehicle type: Rear tipper • Vehicle condition: New vehicle • First registration: None • MOT/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 400 x 200 x 30 cm • External dimensions (LxWxH): 530 x 211 x 102 cm • Platform height: 71 cm • Gross vehicle weight: 3,500 kg • Unladen weight: 1,200 kg • Payload: 2,300 kg • Chassis: High loader (wheels under body) • Tyres: 195/60R12C • Suspension: ALKO rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Steel side panels • Click & Clamp: The new "Click & Clamp" system for maximum strength and rapid addition/removal of various optional side panels and accessories • Automatically adjustable stanchions and clamped side panels ensure smooth travel without unwanted rattling • Robust built-in latches on all side panels • All side panels foldable and removable • Removable steel corner stanchions • Socket mounts on all 4 corners for tarp frames, mesh extensions, side panel extensions, or front panel extensions • Welded-on net hooks under the platform • Sturdy, rattle-free tension latches on side panels • Galvanized steel sheet on multiplex flooring • Reinforced, solidly bolted V-drawbar • Very robust welded steel frame • Frame completely hot-dip galvanized • Multiple cross members for high point load capacity • Additional continuously welded longitudinal beams • 8 recessed lashing points inside the floor (1000DaN/kg), TÜV certified! Covered with spring steel plates beneath • Swinging rear tailgate on hot-dip galvanized steel • U-profile at rear for easy ramp attachment • Integrated ramp slots for optional loading ramps • Twin heavy-duty 4-stage XL hydraulic cylinders • Electric hydraulic pump with battery (12V/90AH) • Detachable remote control for electric hydraulics • External battery charging socket for optional 230V charger • Battery trickle charge: Battery is charged via the vehicle's ignition when the engine is running (depends on towing vehicle) • Battery charge status display • Battery master switch • Maintenance support bar under the platform for service work • ALKO rubber suspension axles • Automatic reversing mechanism • ALKO overrun device and parking brake • Cast steel coupling head with integrated ALKO high-security lock • Tool/storage box mounted on the drawbar • Spare wheel at the rear of the trailer • 13-pin connector • Reversing lights • Complete LED lighting: Extremely bright, durable, and reliable • Dynamic LED indicators • Integrated rear fog light • Various marker lights front, side, and rear • Rear frame lighting recessed • Heavy-duty jockey wheel • 5-year chassis warranty Additional accessories can be retrofitted – please enquire! New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration document can be sent in advance, or export plates (Germany) can be provided - Export plates including customs clearance possible Descriptions and images are copyright protected! Iiedpfx Anex Tcfiokja Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg - Errors, omissions, and prior sale excepted -

Condition: new, functionality: fully functional, empty load weight: 1,000 kg, maximum load weight: 2,500 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 5,800 mm, loading space width: 2,080 mm, tire size: 10, Year of construction: 2026, ++ Freshly manufactured!!! ++ Currently available from stock for immediate delivery (subject to prior sale) ━━━━━ MARTZ GT TILTING 580/3 (3.5 t) ━━━━━ Currently available from stock for immediate delivery (subject to prior sale) New vehicle from an authorized dealer – incl. invoice, warranty & VAT. Martz & Temared: same production, same quality, just different branding. We offer the complete MARTZ product range! ━━━━━ APPLICATION & ADVANTAGES: ━━━━━ • Hydraulically tiltable loading platform (drive-on angle only approx. 10%) • Perfect for cars, machinery & equipment with low ground clearance • Low center of gravity thanks to compact 10-inch wheels • Tridem running gear (3 braked axles) by AL-KO/Knott • Very robust, hot-dip galvanized ladder chassis (long service life) • Steel support rails + central aluminium checker plate (with robust phenolic plywood underneath) ━━━━━ TECHNICAL DATA: Ijdjxq Ehfjpfx Ankjia ━━━━━ • Manufacturer/Model: Martz GT Tilting 580/3 S Alu • Internal dimensions (L×W): approx. 5800 × 2074 mm • Perm. total weight: 3500 kg • Payload: approx. 2500 kg • Tires: 195/55 R10C • Loading platform: tilting (hand pump) • Cable winch with winch post & redirect pulley • Axles: 3 × AL-KO or Knott (each 1350 kg) • Lighting & license plate bracket: foldable • Automatic jockey wheel included • 13-pin plug, reverse automatic function ━━━━━ OPTIONAL ACCESSORIES: ━━━━━ • 100 km/h package: €300 incl. VAT • Wheel chock: €50 each incl. VAT ✅ Our business hours: Mon–Fri: 9 am–7 pm, Sat: 9 am–2 pm ✅ Collection or delivery possible

Condition: new, empty load weight: 12,000 kg, maximum load weight: 54,000 kg, overall weight: 66,000 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood floor Extendable load platform: - Load platform in extendable design with rear chamfer approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the deck (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Hardwood floor approx. 48 mm thick, over the axles checker plate flooring Landing legs: - JOST landing gear (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Brake system: - WABCO brake system in accordance with EU regulations, with EBS-E (4S3M) Steel construction: - High-strength fine-grain steel construction Axles and tires: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle service kit - TPMS tire pressure monitoring system as per ECE R 141 - Tires 245/70 R 17.5 3PMSF Included accessories: - 2" king pin Iiedpfx Aoykpbksnkja - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized connection rail at the front - 4 wheel chocks with holder at the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power pack - Remote steering, operable from front and rear via cable remote with push buttons, with steering alignment indicator - European reflective signs (red-yellow) at the rear of the trailer - White reflective tape as per EU regulations on the sides and on the extension, rear in red - Holder for warning panels on both sides of the gooseneck and at the rear, including socket - Galvanized, extendable side extensions, extendable by approx. 230 mm per side - One beacon bracket at the rear of the trailer - Galvanized folding supports under the rear bevel of the deck - One mudflap at the rear of the trailer - Manual and documentation on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable protective cover around the pump - Removable ALU side boards and rear board on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized drop-in stanchions are removable (body length approx. 2,560 mm) - One INOX toolbox 1,350x400x400 mm on the gooseneck - Note: the box covers the oil filler plug - 4 pairs of WADER container locks in the deck for 1x 20ft, 2x 20ft, 1x 40ft, or 1x 45ft container - 7 pairs of pockets for drop-in posts 100 x 50 mm in the outer frame of the load platform - Adjustable hanging rail for ALU loading ramps at the rear of the vehicle - Square anti-slip strips 20 x 20 mm every 200 mm on the outer frame of the deck slope - Lift axle on the front axle controlled by TEBS-E depending on the actual axle load and loading condition - Four extendable warning signs, approx. 400 mm each, approx. 423 x 423 mm with position lamp - Mounting bracket for beacon on warning signs - Radio remote control for remote steering, in addition to cable control, with indicator LEDs on receiver for tracking alignment - Coated sand layer on checker plate surfaces on the gooseneck and deck as slip protection - 80 km/h speed stickers at rear and both sides - Load gauges for determining axle loads, including load chart

Condition: new, axle configuration: 3 axles, Equipment: ABS, Fliegl Container Chassis ADR, 1x20 / 2x20 / 1x30 / 1x40 / 1x45 Highcube Gooseneck, Fully Galvanized Frame, BPW ? Axles, Lifting Axle, FOR RENT At a Glance · First Registration: New vehicle · Color: Silver (fully galvanized) · Unladen Weight: 4,940 kg · Tires: 385/55 R 22.5 · Note: Several units immediately available Special Equipment Gooseneck container chassis suitable for: 1x20 / 2x20 / 1x30 / 1x40 / 1x45 / High Cube containers, ADR: EX1, EX2, and EX3, front and rear extension, FULLY GALVANIZED, adjustable rear height and foldable centre supports for containers without tunnel, plug-in and removable front container guides, plug adapters for front locking, extendable underride guard for 25 ft containers, BPW ? axles, lifting axle (including forced lowering and start-up aid, activated via 3 x braking), EBS, ABS, axle load detection, rear and brake lights in LED, 2x7 + 1x15 pin electrical connectors, contour marking, 2 wheel chocks, aluminium side underrun protection, spare wheel holder, toolbox, document box. Ijdpfx Asxynqnonkjia Standard Equipment 3 axles, 430mm disc brakes, lifting and lowering valve Subject to errors, typographical mistakes, and prior sale. The seller reserves the right to withdraw the vehicle from sale. _____ Internal Ref. for inquiries: TR26051 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Sales contacts/contact: Mr. Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: also on WhatsApp t: @: Mr. Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / also on WhatsApp t: -104 @: Mr. Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / also on WhatsApp t: -123 @: We speak 13 languages. Certainly yours as well. Contact us! Homepage: Facebook: Instagram: Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks, and transporters. Michael Doblhofer (German, English) p: also on WhatsApp t: -102 @: Bastian Wagner (German, English) p: WhatsApp t: -103 @:

Condition: new, axle configuration: 3 axles, Equipment: ABS, Fliegl Container Chassis ADR, 1x20/2x20/1x30/1x40/1x45 Highcube Gooseneck, fully galvanized frame, BPW ? axles, lift axle All at a glance · First Registration: New vehicle · Color: Silver (fully galvanized) · Curb weight: 4,940 kg · Tires: 385/55 R 22.5 · Remark: Multiple units available for immediate delivery Special equipment Gooseneck container chassis suitable for: 1x20 / 2x20 / 1x30 / 1x40 / 1x45 / Highcube containers, ADR: EX1, EX2 and EX3, front and rear extension, FULLY GALVANIZED, adjustable rear height and foldable center supports for containers without tunnel, pluggable and removable front container guide, plug-in adapter for front lock, extendable underrun protection for 25-foot containers, BPW ? axles, lift axle (including forced lowering and drive-off aid, controlled via 3x brakes), EBS, ABS, axle load detection, LED rear and brake lights, 2x7 + 1x15-pin electrical connectors, contour marking, 2 wheel chocks, aluminum side underrun protection, spare wheel holder, toolbox, document box, listed price per vehicle – also available individually. Standard equipment 3-axle, 430mm disc brakes, lift and lower control valve. Errors, typographical mistakes and prior sale excepted. The seller reserves the right to withdraw from the sale. _____ Internal reference number for inquiries: TR26051 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Sales Contacts: Mr. Ing. Christoph Wimmer (German, English, Czech, Polish, Italian) p: also WhatsApp t: @: Mr. Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / also WhatsApp t: -104 @: Mr. Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / also WhatsApp t: -123 @: We speak 13 languages. Certainly yours as well. Contact us! Homepage: Iiedpfx Ajxynq Usnkea Facebook: Instagram: Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks, and vans. Michael Doblhofer (German, English) p: also WhatsApp t: -102 @: Bastian Wagner (German, English) p: WhatsApp t: -103 @:

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT45001013946, empty load weight: 12,100 kg, maximum load weight: 37,900 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 01/2025, loading space length: 9,200 mm, loading space width: 2,480 mm, loading space height: 3,200 mm, total length: 13,750 mm, total width: 2,550 mm, total height: 4,070 mm, suspension: air, tire size: 205/65 R 17,5 ", maximum speed: 90 km/h, color: blue, Year of construction: 2024, Equipment: tail-lift, The images shown are archive photos; the vehicle may still be in use! Iijdpfx Anoylkywekoa Jumbo Low Loader Chassis for construction machinery transport up to 36,000 kg and a maximum external machine width of 2,500 mm. Fifth wheel plate with replaceable 2" king pin. Rear slope approximately 1,500 mm long at 7°. Ramp shaft closed at top with steel/checker plate. Trailer B-dimension: 12,000 mm Free rear swing radius approx.: 2,350 mm Spare wheel carrier with 1 spare wheel Plastic toolbox In the low-bed: Omega rail laterally below the outer frame as a lashing bar for tarpaulin and spacer holders for lashing pins, not within the wheel area. Lashing Points: Gooseneck: - 5 pairs of lashing points recessed in outer frame, each rated at 5 t - 2 pairs of lashing pins recessed on top and side of outer frame, each rated at 10 t Low-bed: - 7 pairs of lashing pins recessed on top and side of outer frame, each rated at 10 t - 9 pairs of lashing points recessed in outer frame, each rated at 5 t - 3 pairs of additional folding lashing points recessed in the low-bed floor, each 10 t (1x before the drop, 1x in front of the 1st axle, 1x behind the 3rd axle) Axles & Suspension: - Drum brake axles - Last 2 axles self-steering - Air suspension with lift & lower valve + auto-reset function - Raise & lower function with quick release Wheels and Tires: - 205 / 65 R 17.5 for 8,000 kg axle load technical max. at 90 km/h - Steel rims twin arrangement Brake System: - 2-line air brake system - Spring-loaded parking brake - 2 non-interchangeable coupling heads at front, without connecting line - Knorr EBS Electrics: - 2 pairs of double LED warning panels, extendable - 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front - 24 Volt, multi-chamber LED lights - Flashing side marker lights - Beacon with holder - Interior LED work light on front wall - 2 additional LED work lights at rear, switched via reversing light Floor: - Floor designed for maximum forklift axle load of 10,000 kg at minimum 300 mm tire width (note: deformation possible!) Stakes: - 3 pairs of sliding stakes, movable along entire length, with four insert sockets each; only the rear 2 zones are of equal length! - Stake positions: 1x gooseneck, 3x in low-bed Insert Slats: - 5 rows of wooden insert slats Access Ramps: - Ramp surface with "Mega Grip" serrated grating (max. forklift axle load 9,000 kg at min. 200 mm tire width) - Hydraulically operated via independent electric unit installed in stainless steel box front-right, including ramp control; additional operation via radio remote control incl. rear support operation, customer's responsibility! NATO socket on truck required, including connecting line to truck as spiral cable; connection line must NOT be connected while driving! Truck not included. - Steel ramp full width, approx. 3,300 mm long + 3-part aluminium foldable section approx. 900 mm for total ramp length 4,100 mm; if necessary, additional phenolic board max. 9 mm thick under aluminium sections for reduced ramp angle; ramp load capacity 26,000 kg, heavy-duty version; over ramp shaft steel/checker plate; ramp secured during transit with top link. Exact specification available on request!

Condition: used, machine/vehicle number: WSJPRS110BTB22533, axle configuration: 1 axle, first registration: 11/2011, suspension: air, tire condition: 40 %, color: other, Year of construction: 2011, Equipment: tail-lift, = Additional options and accessories = - Air Suspension - Disc brakes - Steering Axle Iijdpfsyiav Tex Ankea = More information = Make axles: SAF Tyre profile: 40% Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels Tail lift: MBB, tail lift, 2500 kg