Used Humbaur Htd 40 V21 for sale (11,169)

Condition: new, empty load weight: 7,500 kg, maximum load weight: 32,500 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 03/2023, loading space length: 9,700 mm, loading space width: 3,000 mm, loading space height: 900 mm, suspension: air, tire size: 235/75r17,5, Year of construction: 2026, Equipment: ABS, center pivot plate, TOP EQUIPMENT => INCLUDING THE FOLLOWING ACCESSORIES: Hot-dip galvanized chassis frame Storage box at the top front of the plateau, with hinged lid Hnedpfx Aaoglblleajk Rear storage box at the top of the plateau, with hinged lid Trough for excavator stick storage, rear low bed area 3 m equipment package without slope Warning package for special permit Sheet steel tool box Stake pocket package in outer frame Basic hydraulics for trucks with rear connection Hydraulic ramp lift for 1-piece ramps Hydraulic lateral ramp displacement Hydraulic support legs left and right 1 1 pair of lashing eyes 6 tons in the outer frame, bolted WABCO-Smart Board conf. SSV cpl. front left HTD409525K COC COC paper OPTIONAL Rubber floor on the ramp 1890€ net Rubber floor on the slope 1250€ net Reversible drawbar 40 / 50 DIN

Condition: new, empty load weight: 9,650 kg, maximum load weight: 30,350 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,740 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 r17,5 zoll, Year of construction: 2026, Equipment: ABS, center pivot plate, 4-AXLE LOWBED TRAILER WITH TOP-SPEC EQUIPMENT! => HOT-DIP GALVANIZED (CHASSIS FRAME, BOGIE FRAME, ACCESS RAMPS) => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE MODULE!) => SAF LOWBED AXLES => LASHING PACKAGE => OUTER FRAME WITH PERFORATIONS FOR ADDITIONAL LASHING POINTS => CLEAT STRIPS AT REAR OF ACCESS SLOPE => 6 LASHING POINTS IN THE EXCAVATOR ARM TROUGH AT THE REAR => LONG ONE-PIECE ACCESS RAMPS => LOW APPROACH ANGLE Permissible gross weight: 40,000 kg Payload approx. 30,350 kg Chassis frame hot-dip galvanized Bogie frame hot-dip galvanized Access ramps hot-dip galvanized Air suspension Hnedpfjhvxgzex Aaask SAF axle with drum brakes EBS electronic braking system Tyres: 235/75R17.5 – 16 units Lowbed length approx. 7,160 mm Trough for excavator arm resting, approx. 3,000 x 730 x 180 mm at rear of lowbed 4 pairs of 10-ton recessed lashing rings in lowbed 2 pairs of 10-ton recessed lashing rings in raised deck 4 pairs of 3-ton lashing points on outer frame of lowbed 3 pairs of 6-ton lashing eyes on outer frame 4 pairs of stake pockets in outer frame of raised deck 4 pairs of stake pockets in outer frame of lowbed 3-meter widening kit with folding outriggers (flat, no slope) 4 x warning panels with lights Rotating beacon at rear LARGE STEEL STORAGE BOX under the loading area 2 storage compartments with hinged lids in raised deck Hydraulic ramp lifters 1-piece ramps, approx. 3,150 x 750 mm Softwood floor on loading area and ramps 40,000 kg GVW only with special permit as per Section 70 => Delivery freight costs: €2.90 plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hauptmann Tel. DOLL Fahrzeugbau *Subject to prior sale and modifications!* *Price valid ex works D-86368 Gersthofen* *Sale to commercial customers only!* *Images may differ and are for general guidance only — may show/accessorise options available at extra cost*

Condition: used, empty load weight: 8,680 kg, maximum load weight: 31,320 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 09/2018, suspension: other, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, ABS, widening with warning signs, vehicle is sold on behalf of., , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Hedsyy I Uvjpfx Aaasnk

Condition: used, empty load weight: 8,680 kg, maximum load weight: 31,320 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 09/2018, suspension: other, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, ABS, widening with warning signs, vehicle is sold on behalf of., , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Hjdoyyzalopfx Aaaenk

Condition: new, Year of construction: 2024, HTD 40K-BM 2022 010 Humbaur Dreschemel low loader trailer 020 Technical data: 030 Internal dimensions: approx. 9,230 mm x 2,540 mm 040 Overall dimensions: approx. 11,310 mm x 2,540 mm x 3,810 m 050 Permissible Total weight: 24,000 kg 060 Payload: approx. 15,600 kg 070 Tires: 235/75 R17.5 inch 080 Loading height: approx. 900 mm 090 Drawbar length: approx. 1,500 mm 100 Coupling height: approx. 830-1,010 mm 110 Permissible total weight special version: 40,000 kg 120 Payload special version: approx. 31,600 kg 130 Low bed length: approx. 6,620 mm 140 Total dimension (B dimension): 11,200 mm 150 Total weight (technical): approx. 44,000 kg 160 Technical axle load: approx. 11,000 kg 170 4 pairs of lashing rings, 10,000 kg each Lashing point 180 Lashing rings in the low bed, recessed 190 3 pairs of lashing rings, 10,000 kg per lashing point 200 Lashing rings in the high bed, recessed 210 4 pairs of lashing rings, 2,000 kg per lashing point 220 above wheel cutout 3rd and 4th axle 230 3 pairs of lashing rings, 3,000 kg per lashing point 240 Lashing points in the low bed outer frame 250 4 pairs of lashing rings, 3,000 kg per lashing point 260 Lashing/stanchion pockets 3 t in the high bed outer frame 270 4 pairs of lashing rings, 3,000 kg per lashing point 280 Lashing/stanchion pockets 3 t in the low bed outer frame Hnodsyru Thspfx Aaaek 290 Storage box at the top of the front in the platform, with hinged lid 300 Size approx. L 700 x D 810 x H 140 mm 310 Storage box at the top of the rear of the platform, with hinged lid 320 Size approx. L 700 x D 810 x H 140 mm 340 1 pair of lashing eyes 6 t in the outer frame, screwed 350 => additional 3 pairs of lashing eyes 6 t in the outer frame 360 evenly distributed in the low bed 370 Warning package LED HTD cranked Aspöck 380 Warning signs 4-way, electrics and rotating beacon 390 3m package HTD40K-2022 without slope 400 Folding boom with spruce planks 410 for the straight part of the low bed 420 Sheet steel tool box HTD/HTS 430 as a storage compartment for storing the wooden planks 440 or rubber/aluminum panels mounted lengthways, lockable, 450 approx. L 2,730 x D 580 x H 290 mm 460 SSV front left-sheet metal storage box left 470 Basic hydraulics for trucks with rear connection 480 Operating pressure 200 bar and up to 1501/min 490 with 2-circuit hydraulic connection and return 500 Operating pressure 200 bar and up to 1501/min 510 with 2-circuit hydraulic connection and return 520 Hydraulic ramp jack for 1-part ramps 530 TIM Knorr with cable and holder 540 ECE plate at the rear 550 COC paper

Condition: as good as new (ex-display), empty load weight: 10,000 kg, maximum load weight: 30,000 kg, overall weight: 40,000 kg, axle configuration: 4x2, loading space length: 9,220 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R17,5, Year of construction: 2025, Equipment: ABS, center pivot plate, trailer coupling, HTD 40K-RM-BM_ Internal dimensions: approx. 9,220 mm x 2,540 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Perm. total weight: 24,000 kg Payload: approx. 14,000 kg Tyres: 235/75R17.5 inches Loading height: approx. 900 mm Drawbar length: approx. 1,500 mm Coupling height: approx. 820–1,000 mm Ramp angle: approx. 10° Ramp length: approx. 3,150 mm Ramp width: approx. 750 mm Perm. total weight special equipment: 40,000 kg Payload special equipment: approx. 30,000 kg Low-bed length: approx. 6,610 mm Overall dimensions (LxWxH): 11,200 Technical total weight: approx. 44,000 kg Technical axle load: approx. 11,000 kg 6 pairs of lashing points, 3,000 kg each Lashing points in the low-bed outer frame 4 pairs of lashing points, 3,000 kg each Lashing/pocket sleeves 3 t in the high-bed outer frame 1 pair of lashing points, 3,000 kg each Lashing/pocket sleeves 3 t in the low-bed outer frame Suspension: Air suspension unit including lifting and lowering acting on the rear axle unit Brake system: Brake system according to EC directives with EBS 4S/3M in multivoltage version (12–24V), spring-loaded parking brake including two external test ports for brake/modulator and bellows pressure Electrics: LED lighting with indicator function for side marker lights, multivoltage (12–24V) Turntable: Heavy-duty welded construction with low-maintenance ball-bearing turntable Towing equipment: Cranked drawbar with 50 mm towing eye, low-maintenance silent bushings including height adjustment for drawbar Chassis: Heavy-duty welded construction made of high-tensile fine-grained steel, through-running cross-members for maximum stability Wheel recesses front (approx. 2,500 mm upper length, 410 mm depth) and rear (approx. 1,470 mm upper length, 370 mm depth); without wheel recess covers Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm) Wheel cutouts above the rear wheels with 2,010 mm wheelbase, front corners chamfered, rear with climbing strips on ramp incline for maximum safety during loading and unloading 4 pairs of stake pockets (90x50 mm) on high-bed outer frame 1 pair of stake pockets (90x50 mm) on low-bed outer frame Floor: 50 mm softwood flooring (painted/impregnated) Ramps: One-piece hot-dip galvanized loading ramps (3,150 mm x 750 mm) with 50 mm softwood covering (painted/impregnated), laterally adjustable, direct-acting upright spring-assist for easiest handling Finish: Chassis frame hot-dip galvanized in immersion bath Hnjdpjiciutefx Aaajk Support: 2 foldable supports at the rear left and right of the vehicle Equipment: Folding side underrun protection Front semi-circular plastic mudguards; rear straight steel mudguards with anti-spray 2 wheel chocks with holders; contour markings according to ECE regulation R48 Front wheel recess cover: With 3 pairs of stake pockets, without covering (cover retractable under the longitudinal beams) 975.00888 Hardwood covering for front wheel recess cover Rear wheel recess cover: With 1 pair of stake pockets, without covering (cover retractable under the longitudinal beams) 975.00897 Hardwood covering for rear wheel recess cover 3 pairs of bolted lashing eyes, 6 t 3 m equipment package without incline B=11,200 Folding outriggers with softwood boards 970.04199-36 LED warning package HTD, cranked Aspöck warning boards 4 times, electrics and revolving beacon 1 pair of storage compartments for 3 m wood planks package (2 pieces mounted lengthwise under the loading area in front of the wheel recess) Rubber coat

Condition: used, maximum load weight: 31,240 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 05/2012, B 11,710 mm, unladen weight 8,760 kg Loading length over turntable 2,570 mm incl. 300 mm bevel Loading length 7,300 mm incl. 1,000 mm bevel Hodpfx Aoyxvb Ieaajnk Loading height 870 mm Width 2,550 mm, extendable to 3,000 mm Excavator trough in rear chassis: length 2,900 mm, width 800 mm, depth 180 mm SAF axles with air suspension and axle load scale One-piece hydraulic ramps, 3,000 mm long, 750 mm wide Ramps hydraulically adjustable Foldable rear support Front storage box Central lubrication system

Condition: used, empty load weight: 6,740 kg, maximum load weight: 23,260 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2019, next inspection (TÜV): 01/2027, suspension: air, tire size: 235/75 R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75 R17,5 ---/140J, rear tire size: 235/75 R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing rings, stake pockets, -- Printing errors, mistakes and changes reserved, sample images -- More data at: !, More details: ! Hsdpfx Aey Dkavsaajnk

Condition: new, maximum load weight: 2,140 kg, overall weight: 270 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,140 mm, loading space height: 610 mm, total width: 2,190 mm, total height: 900 mm, Year of construction: 2026, Humbaur Vehicle Transporter FTK 27 40 22 - Winch Mount with Winch Base price: €4,855 Our price: €4,350 incl. VAT, including winch mount with winch (worth €438), delivery costs (pick-up in Nuremberg), and vehicle documents. Description: With the new tiltable vehicle transporter FTK from Humbaur, you can transport your vehicle comfortably and safely. The FTK brings the benefits of tilt-bed vehicle trailers to the compact class for the first time. Ideal for car repair service providers as well as private users for transporting small vehicles such as a Smart or VW Golf. The new Humbaur FTK offers all the advantages of tiltable vehicle transporters, now also in a compact version. The deck can be tilted mechanically using shock absorbers, allowing you to easily drive the trailer up ribbed steel ramps. The winch and hydraulic tilting system make loading even easier. Four variants with payloads of up to two tonnes and different dimensions let you select a tailor-made, cost-effective model. The carefully considered and robust design ensures optimal use of the loading area and a low loading angle. Galvanized components and numerous load securing points demonstrate Humbaur's attention to quality and detail. Hnodpfeyxz A Dox Aaajk Technical Data: Trailer type – tandem axle * Unladen weight – 610 kg * Gross weight – 2,700 kg * Payload – 2,140 kg * Load bed length – 4,000 mm * Overall length – 5,515 mm * Load bed width – 2,140 mm * Overall width – 2,190 mm * Total height – 900 mm * Load height – 610 mm * Tyres – 10 inch * Drawbar length: approx. 1,425 mm * Coupling height: approx. 435 mm * Approach angle: approx. 10° * Ramp length: approx. 1,380 mm Standard Equipment: V-drawbar, hot-dip galvanized * 13-pin connector and reversing light * 18 mm thick floor panel * 2 hot-dip galvanized ramps with grating, stored under the load bed * 2 support legs standard on 3,500 kg models * 7 lash rings per side in the external frame profile * Perforated external frame profile * Winch with cable and triple-depth adjustable mounting bracket * Automatic jockey wheel

Condition: new, empty load weight: 10,650 kg, maximum load weight: 39,350 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, loading space length: 9,830 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 r17,5 zoll, Year of construction: 2026, Equipment: ABS, center pivot plate, 5-AXLE TURNTABLE LOW-LOADER HOT-DIP GALVANIZED => FULLY AIR-SUSPENDED => HOT-DIP GALVANIZED IN TOP - EQUIPMENT!!!! * AS LIFT AXLE * AS SELF-STEERING AXLE -SAF - LOW LOADER AXLES -LIFT SPRING -1-PART LONG RAMPS -HYDRAULIC RAMP JACK -HYDRAULIC REAR STABILIZERS -HYDRAULIC SIDE SHIFT -HYDRAULIC SYSTEM UP TO 150 LITERS/MINUTE -EXCAVATOR STICK TROUGH -HOT-DIP GALVANIZED CHASSIS AND BOGIE FRAME -EXTERIOR FRAME ADDITIONALLY PAINTED IN RED DRIVE-ON RAMPS HOT-DIP GALVANIZED -10 to. LASHING POINTS RECESSED IN THE LOADING AREA -3 to. LOCKING POINTS IN THE EXTERIOR FRAME High plateau -6 to. LASHING POINTS IN THE OUTDOOR FRAME Low bed -4 pairs of lashing points 3 tons in the outer frame low bed -LASHING POINTS IN THE EXCAVATOR TROUGH -3 METER WIDENING PACKAGE -KLAPPAUSLEGER -WOODEN PLANKS IN THE STEEL BOX UNDER THE LOADING AREA -SECOND STEEL STOWAGE BOX UNDER THE LOADING AREA -WARNING TABLES -ROTATING BEACON AT THE REAR -CLIMBING RAILS AT THE REAR -2 STOWAGE BOXES IN THE HIGH PLATEAU -DIGITAL AXLE LOAD INDICATOR -WABCO-SMART-BOARD -AIR SUSPENSION -LIFT/LOWER VALVE AT THE REAR (REAR LOWERING FOR LOADING AND UNLOADING) -stake pockets in the outer frame -TWO STAKE POCKETS INCL. STANCHIONS ON THE FRONT SIDE -EBS - ELECTRONIC BRAKING SYSTEM B-DIMENSION = approx. 11,790 MM => Freight costs for delivery: 2.90 euros plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU Hnodpfx Aohmm Rcsaaek *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Condition: new, empty load weight: 6,000 kg, maximum load weight: 24,000 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,540 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 r17,5, Year of construction: 2026, Equipment: ABS, center pivot plate, 3-AXLE HUMBAUR LOW LOADER including: 3 pairs of 6-tonne outer frame => HOT-DIP GALVANIZED CHASSIS FRAME => HOT-DIP GALVANIZED BOGIE FRAME => HOT-DIP GALVANIZED ACCESS RAMPS => 10 PIECES 10 TONS LASHING POINTS => 10 PIECES 3 TON lashing points, outer frame => 8 PIECES 2 TONS OF TOWING POINTS, above wheels Hsdpfod U A Tgox Aaaonk => SPRING LIFTING MECHANISM FOR THE ACCESS RAMPS => Ø 40 mm DRAWING FORK => DRIVING RAMPS approx. 2,700 MM LONG => EXPANDING ROMPS approx. 750 MM WIDE => TWIN TIRES 235/75 R17.5 INCH => LOAD HEIGHT LOADED ONLY approx. 860 MM => CUPD SIZE / B SIZE approx. 10,720 MM => FRONT CORNERS BEVELED => TWO FOLDING SUPPORTS AT THE REAR => UVM. => freight costs for delivery: 2.90 Euro plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Condition: new, empty load weight: 6,650 kg, maximum load weight: 23,350 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,540 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 r17,5 zoll, Year of construction: 2026, Equipment: ABS, center pivot plate, 3-AXLE LOW-LOADER => FULL-SUSPENSION (front and rear) => HOT-DIP GALVANIZED Perm. total weight 30,000 kg Payload approx. 23,350 kg Chassis frame hot-dip galvanized Air suspension SAF axle with drum brake EBS electronic braking system 235/75R17.5 tires - 12-ply Drop deck length approx. 6500 mm Hedpfx Ajhmm N Ujaaonk 3 pairs of lashing rings 10 to. recessed in the low bed 2 pairs of lashing rings 10 to. recessed in the high bed 4 pairs of lashing points 3 to. on the outer frame 3 pairs of lashing eyes 6 to. on the outer frame 6 pairs of stanchion pockets 90 x 50 mm in the outer frame Storage box at the top front of the plateau, with hinged lid 3-meter widening package without slope, with hinged extension arm Spring ramp jack 4 x warning signs Rotating beacon Storage compartment under the cargo bed 1 part ramps approx. 3150 x 750 mm Softwood flooring for loading area and ramps Extras if required : Hydraulic ramp lift 2690.00 + VAT => Freight costs for delivery: 2,90 Euro plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact person: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Condition: used, maximum load weight: 23,700 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2023, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, total width: 2,550 mm, Total weight: 24,000kg / 30,000kg Empty weight: 6,300kg Hnedpewrv Saofx Aaask Payload: 17,700kg / 23,700kg Total length: 10,900mm Loading length: Total 8,600mm, 6,500mm including rear incline, 2,100mm cranking Width: 2,550mm Loading height: 900mm Additional info: - Robust welded construction from high-strength fine-grained steel - Hot-dip galvanized - Rear support - Twin tires 235/75R17.5 - Warning signs - LED reverse lights - Lashing points outer frame - Lashing eyes 4x cranking, 6x low bed (10,000 daN) - One-piece hot-dip galvanized drive-on ramps (3,100mm x 750mm) with 50 mm softwood covering, laterally movable - Storage box in cranking - Plastic toolbox - Collision protection - Floor with 50mm softwood covering - Climbing strips at the rear end of the drive-on ramp

Condition: new, maximum load weight: 23,600 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2025, Equipment: ABS, * Humbaur HTD 308525 * New vehicle * Low loader * Year of manufacture 2025 * Total weight: 30,000 kg * Empty weight: 6,400 kg * Payload: 23,600 kg * Overall dimensions: 10,780 mm x 2,540 mm x 3,780 mm Hodpstyh Dpofx Aaasnk * Internal dimensions: 6,500 mm x 2,520 mm * Loading height: 890 mm * Tires: 12-fold 235/75 R17.5 * Ramp angle 10 degrees * Parabolic suspension or air suspension * 24 V EBS braking system * 24 V electrical system * Solid welded construction made of fine-grain steel * 4-fold warning sign * Rotating beacons * 3 pairs of 10 ton lashing rings sunk in the low bed * 2 pairs of 10 ton lashing rings sunk in the high bed * 4 pairs of 3.0 ton lashing rings on the outer frame * 4 pairs of 2.0 ton lashing rings above the wheel cutout * Floor made of 50 mm softwood flooring * Chassis frame and bogie hot-dip galvanized in a dip bath * One-piece hot-dip galvanized ramps * We would be happy to make you an individual offer * Several vehicles in stock * Also available in other sizes and weight classes ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to sell the item prior to purchase, as we also offer this item on other portals. We strongly recommend an inspection and test so that the buyer does not have any false ideas about the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired !!! Images are similar, may contain accessories for which an additional charge is required. The internal dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! EXCHANGES AND PAYMENTS POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday - Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 new and used trailers in stock at all times!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, empty load weight: 690 kg, maximum load weight: 2,310 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 300 mm, loading space volume: 1.7 m³, color: other, construction height: 970 mm, working width: 1,890 mm, Manufacturer: Humbaur Model: Rear Tipper Tandem HUK 303117 Permissible total weight: 3,000 kg Payload: 2,310 kg Unladen weight: 690 kg Body dimensions: 3,140 x 1,750 x 300 mm Tires: 13 inch Loading height: 670 mm Platform hydraulically tiltable via hand pump Tipping angle 45°, with leaf grille attachment 600 mm With AkkuFlex pump, allows tilting of the platform using a cordless screwdriver Demonstration trailer at a special price - Chassis and tipping platform welded and hot-dip galvanized - Galvanized platform floor (3mm) - V-groove outer frame with 4 pairs of recessed lashing rings - Drop-down side panels 300 mm all around - 13-pin plug and reversing lights - Rod-type closures - Conical corner posts - Automatic jockey wheel - Humbaur multifunctional lighting integrated into the underrun protection - 3-stage telescopic cylinder - Hand pump Price includes registration certificate (Part II registration document and COC papers) We have a wide range of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, you will receive a free temporary number plate from us. We repair trailers from all manufacturers. Further accessories available on request. Technical modifications, price changes, and errors excepted. No liability is assumed for errors or misprints. Automatic reversing system, rubber suspension axle, independent wheel suspension, tiltable platform, automatic jockey wheel, marker lights, galvanized platform floor (3mm), braked, including warranty, chassis and tipping platform welded and hot-dip galvanized, V-groove outer frame with 4 pairs of recessed lashing rings, 300 mm fold-down side panels all around, 13-pin plug and reversing lights, rod-type closures, conical corner posts, Humbaur multifunctional lighting integrated into the underrun protection, 3-stage telescopic cylinder, hand pump. Hjdpfex Iv I Tex Aaasnk

Condition: used, empty load weight: 600 kg, maximum load weight: 1,400 kg, overall weight: 2,000 kg, first registration: 01/1989, next inspection (TÜV): 05/2027, loading space length: 4,000 mm, loading space width: 1,700 mm, loading space height: 2,000 mm, loading space volume: 13.6 m³, color: other, construction height: 2,700 mm, working width: 1,780 mm, Equipment: second-hand vehicle warranty, Manufacturer: Humbaur Type: High-loader box trailer Permissible total weight: 2000 kg Payload: 1400 kg Unladen weight: 600 kg Cargo box dimensions: 4000 x 1700 x 2000 mm Tyres: 14 inch Loading height: 540 mm The trailer is in good condition. The trailer is fitted with a tarpaulin above the roof, making it waterproof. TÜV valid until 05/2027. Price includes vehicle registration certificate (Part II and COC document). We have a large selection of trailers from the following brands in stock: Brenderup, Humbaur, Hapert, Unsinn, and Neptun. Upon request, we provide a free transit licence plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical modifications, price changes, and errors reserved. No liability is accepted for errors or typographical mistakes. Rubber suspension axle, jockey wheel, hot-dip galvanized, unbraked. Hnedjyw E Dcopfx Aaajk

Condition: new, empty load weight: 1,040 kg, maximum load weight: 2,460 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, loading space volume: 2.2 m³, color: silver, construction height: 1,260 mm, working width: 1,903 mm, Manufacturer: Humbaur Type: 3-way tipper HTK Alu 3500.31 Gross vehicle weight: 3500 kg Payload: 2460 kg Empty weight: 1040 kg Box dimensions: 3140 x 1750 x 350 mm Tires: 13 inches Loading height: 740 mm Loading area can be tilted hydraulically with a hand pump and an electric pump Tipping angle at the rear 42, at the side 50 - V-drawbar hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized - Tipping bridge made of steel, made from a single piece - 4-stage hard-chrome-plated tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing light - Side walls made of aluminum 350 mm high, cpl. removable - rear flap can be pivoted - 6 tie rings mounted on the bridge floor, pulling force 800 kg per tie ring, Dekra tested - support wheel - plank shaft as preparation for aluminum planks for easy retrofitting - silver side walls - parabolic suspension Price includes vehicle registration document (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, you can receive a free transfer license plate from us. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints. Automatic reversing, rubber spring axle, independent wheel suspension, tilting loading area, support wheel, marker lights, chassis and tipping bridge hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipping bridge made of steel, made in one piece, 4-stage hard chrome-plated tipping cylinder, electric pump with hand pump, 13-pin plug and reversing light, aluminum side walls 350 mm high, completely removable, swinging rear flap, 6 tie rings mounted on the bridge floor, pulling force 800 kg per tie ring, Dekra tested, plank shaft as preparation for aluminum planks for easy retrofitting, silver side walls, parabolic suspension. Hnedswlabxspfx Aaajk

Condition: new, empty load weight: 907 kg, maximum load weight: 2,130 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, loading space volume: 2.2 m³, color: other, construction height: 1,260 mm, working width: 1,930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3,000 kg Payload: 2,130 kg Unladen weight: 870 kg Body dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading height: 750 mm Load platform hydraulically tiltable via manual and electric pump Tipping angle: rear 42°, lateral 50° Equipped with 600 mm high steel plate extensions, four-sided swinging Includes flat tarpaulin - V-drawbar hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized - Tipping bridge constructed from single-piece steel - 4-stage hard-chrome tipper cylinder - Manual pump; with electric pump and manual pump from 3,000 kg permissible total weight - 13-pin connector and reversing lights - Sidewalls made of aluminium, 350 mm high, fully removable - Rear flap pendulum-suspended - 6 lashing rings mounted on the platform floor, each with 800 kg traction force, Dekra certified - Jockey wheel - Plank compartment pre-fitted for easily retrofitting with aluminium planks Price includes vehicle registration document (Type Approval Part II and COC papers) We have a large stock of trailers from these manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit registration plate. We offer repair services for trailers of all makes. Further accessories available on request. Hodsyw Ez Uepfx Aaaenk Technical modifications, price changes, and errors excepted. No liability for errors or printing mistakes. Features: automatic reversing system, rubber suspension axle, independent wheel suspension, tiltable platform, jockey wheel, position lights, chassis and tipping bridge hot-dip galvanized, braked, warranty included, V-drawbar hot-dip galvanized, tipping bridge from single-piece steel, 4-stage hard-chrome tipper cylinder, manual pump, from 3,000 kg permissible total weight electric pump with manual pump, 13-pin connector and reversing lights, aluminium sidewalls 350 mm high, fully removable, rear pendulum flap, 6 lashing rings on the platform floor (800 kg traction force each, Dekra certified), plank compartment pre-fitted for aluminium planks for easy retrofitting.

Condition: new, empty load weight: 1,040 kg, maximum load weight: 2,460 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, loading space volume: 2.2 m³, color: black, construction height: 1,260 mm, working width: 1,903 mm, Manufacturer: Humbaur Type: 3-way tipper HTK Alu 3500.31 Black edition Total permissible weight: 3500 kg Payload: 2460 kg Empty weight: 1040 kg Box dimensions: 3140 x 1750 x 350 mm Tires: 13 inches Loading height: 740 mm Loading area can be tilted hydraulically with hand pump and electric pump Tipping angle at the rear 42, at the side 50 - V-drawbar hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized - Tipping bridge made of steel, made in one piece - 4-stage hard-chrome-plated tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing light - Side walls made of aluminum 350 mm high, cpl. removable - Rear flap can be pivoted - 6 tie rings mounted on the bridge floor, pulling force 800 kg per tie ring, Dekra tested - support wheel - plank shaft in preparation for aluminum planks for easy retrofitting - black side walls - parabolic suspension Price includes vehicle registration document (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun If you wish, you can get a free transfer license plate from us. We repair trailers from all manufacturers. Additional accessories on request. Technical changes, price changes and errors reserved. No liability is accepted for errors and misprints. Automatic reversing, rubber spring axle, independent wheel suspension, tiltable loading area, support wheel, side lights, chassis and tipping bridge hot-dip galvanized, braked, includes guarantee, V-drawbar hot-dip galvanized, tipping bridge made of steel, made in one piece, 4-stage hard-chrome-plated tipping cylinder, electric pump with hand pump, 13-pin plug and reversing light, aluminum side walls 350 mm high, completely removable, swinging rear flap, 6 tie rings mounted on the bridge floor, pulling force 800 kg per tie ring, Dekra tested, plank shaft in preparation for aluminum planks for easy retrofitting, black side walls, parabolic suspension. Hnsdpfxovtf Nfs Aaaek

Condition: used, empty load weight: 907 kg, maximum load weight: 2,130 kg, overall weight: 3,000 kg, axle configuration: 2 axles, first registration: 08/2023, next inspection (TÜV): 08/2026, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, loading space volume: 2.2 m³, color: other, construction height: 1,260 mm, working width: 1,930 mm, Equipment: second-hand vehicle warranty, Manufacturer: Humbaur Model: 3-way Tipper HTK Alu 3000.31 Permissible total weight: 3000 kg Payload: 2130 kg Unladen weight: 870 kg Platform dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 750 mm Load platform hydraulically tiltable with manual pump and electric pump Tipping angle: rear 42°, sideways 50° with mesh side extension / steel mesh extension, 600 mm high, swinging on all four sides Incl. aluminium ramps and 2 supports The trailer was repurchased due to business closure. It is in as-new condition and has only been used approx. 3 times. - V-drawbar, fully hot-dip galvanized - Chassis and tipping bridge fully hot-dip galvanized - Tipping bridge made from one-piece steel - 4-stage hard-chrome plated tipping cylinder - Manual pump, from 3000 kg permissible total weight with electric pump and manual pump - 13-pin plug and reverse light - Aluminium side panels, 350 mm high, fully removable - Rear flap, swinging - 6 lashing rings mounted on the platform floor, tensile load 800 kg per ring, Dekra tested - Jockey wheel - Stake pocket pre-fitted for easy retrofitting of aluminium ramps Hodpfx Asxyulfjaasnk Price includes vehicle registration documents (registration certificate part II and COC papers) We stock a large number of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide a free temporary registration plate. We repair trailers from all manufacturers. Further accessories available on request. Technical changes, price adjustments, and errors reserved. No liability is accepted for errors or printing mistakes. Features: auto-reverse braking, rubber suspension axles, independent suspension, tilting platform, jockey wheel, marker lights, chassis and tipping bridge fully hot-dip galvanized, braked, V-drawbar fully hot-dip galvanized, tipping bridge made from one-piece steel, 4-stage hard-chrome plated tipping cylinder, manual pump, from 3000 kg permissible total weight with electric pump and manual pump, 13-pin plug and reverse light, aluminium side panels 350 mm high, fully removable, rear flap swinging, 6 lashing rings mounted on the platform floor, tensile load 800 kg per ring, Dekra tested, stake pocket pre-fitted for easy retrofitting of aluminium ramps.

Condition: reconditioned (used), functionality: fully functional, empty load weight: 2,400 kg, maximum load weight: 1,596 kg, overall weight: 804 kg, axle configuration: 2 axles, first registration: 02/2015, next inspection (TÜV): 09/2027, loading space length: 3,150 mm, loading space width: 1,670 mm, loading space height: 2,300 mm, total length: 4,640 mm, total width: 2,230 mm, total height: 2,800 mm, suspension: other, tire size: 195/65R15, tire condition: 100 %, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2014, Humbaur Xanthos 2400 - Used vehicle, VAT deductible! - - Completely workshop overhauled - New overrun brake system and tires - 1 previous owner - Very good condition - TÜV (roadworthy inspection) valid until September 2027 Standard features: EquiDrive® chassis with shock absorbers 100 km/h approval (valid only in Germany) Body made of double-walled, anodized aluminum profiles Side step protection 13-pin plug with reversing and fog lights AluBiComp floor plate, 21 mm thick Rubber flooring, 8 mm thick, glued and sealed Robust, all-round, hot-dip galvanized frame profile Elegant, hot-dip galvanized rear props with integrated lighting Entry and tack room doors with 3-point locking system Ramp with anti-slip rubber and side stops Divided and padded breast and rear bars, height and length adjustable, with panic release Tinted, newly designed tilting windows, 5-way adjustable Interior lighting and hay net ring Exclusive wind deflector for draft-free interior ventilation Automatic jockey wheel, centrally mounted with maneuvering handle Poly hood in black metallic Special equipment: Spare wheel with holder at the front Technical specifications: - For 2 horses Hjdpfsyz Tliex Aaaenk - Permissible total weight: 2,400 kg - Braked tandem axle - Internal dimensions: 315 x 167 x 230 cm - Unladen weight: 804 kg - Payload: 1,596 kg - Loading height approx. 45 cm - Overall dimensions (L x W x H): approx. 464 x 223 x 280 cm

Condition: new, maximum load weight: 1,590 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 4,064 mm, loading space width: 1,774 mm, loading space height: 2,000 mm, total width: 2,292 mm, total height: 2,634 mm, Year of construction: 2026, Box Trailer - HK 254018-20P FlexxZurr Base price: €9,080 Special offer price: €7,400 incl. 19% VAT, including freight costs (self-collection in Nuremberg), and registration certificate included! Description: The tandem plywood box trailer impresses with its well-designed detailed solutions and versatile applications. The chassis and frame are made of hot-dip galvanized steel, ensuring a long service life for the plywood box series. The structure is completely made of 15 mm multi-layered plywood with a special plastic coating, which can be customized with your company advertising for an additional charge upon request. An interior light is installed for improved visibility. All plywood box trailers are equipped with galvanized steel hinges and a lockable bar lock. The doors are fitted with plastic seals allowing water-protected transport of your goods. Aluminum reinforcements in the roof area and at the lower front panel provide the Humbaur plywood box trailers with exceptional stability. The floor is made from specially bonded, water-resistant plywood with an anti-slip phenolic resin coating and a thickness of 15 mm. The integrated side lashing system is mounted in the anodized side frame profiles. Each lashing point has a tested tensile strength of 400 kg (Dekra-certified). This system can be expanded upon request and offers sufficient flexibility to secure the load effectively. Trim profiles, a torsion-resistant rear frame, and rain gutters are made of anodized aluminum, offering maximum protection against corrosion. The Humbaur tandem plywood box trailer is the ideal partner for transporting your goods. Technical Specifications: * Trailer type: Twin axle * Construction: Plywood * Unladen weight: 890 kg * Gross vehicle weight: 2,500 kg * Payload: 1,610 kg * Internal length: 4,064 mm * Overall length: 5,546 mm * Internal width: 1,774 mm * Overall width: 2,292 mm * Internal height: 2,000 mm * Overall height: 2,634 mm * Loading height: 560 mm * Tyres: 15" Hnsdpfx Aaeyxkg Eeajk Standard Equipment: * V-drawbar, fully hot-dip galvanized * 13-pin plug and reversing light * 15 mm thick floor plate * Side walls and roof made from 15 mm multi-layered plywood with UV-resistant plastic coating * Interior light installed * Rear double-wing doors * Galvanized bar lock and hinges * Lashing rings movable along the frame profile, tensile strength 400 kg per ring, Dekra certified * Automatic jockey wheel

Condition: new, maximum load weight: 1,570 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,800 mm, loading space height: 2,000 mm, total width: 2,318 mm, total height: 2,640 mm, Year of construction: 2025, * Humbaur HK 254018-20P * Tandem box trailer * Car trailer * Box trailer * New vehicle * Total weight: 2500kg * Empty weight: 930 kg * Payload: 1570 kg * Overall dimensions: 5434mm x 2316mm x 2640mm * Internal dimensions: 4070 x 1810 x 2000 * Double-wing door at the rear * Rotating rod lock and hinges made of stainless steel * Door opening dimensions 1685 x 1960 mm * 13-pin plug and reversing light * Base plate 18 mm thick * Side walls made of 18 mm thick multi-layer wood with GRP coating * Roof 18 mm thick with GRP coating * Interior lighting * Rotating rod lock and hinges made of stainless steel * Automatic support wheel * V-drawbar The Humbaur box trailers can be customized to your requirements, and a large range of accessories and equipment options are available. The individual models are available in different weight classes and sizes, also with a Sandwich PurFerro structure. We would be happy to make you an individual, non-binding offer. Hodpfxoi Twucs Aaaonk ATTENTION !!!!! READ THIS ESSENTIALLY !!!!! We expressly reserve the right to sell the item prior to purchase, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer does not have any false ideas about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! The internal dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! EXCHANGES AND PAYMENTS POSSIBLE !!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday ? Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, maximum load weight: 2,140 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 03/2024, loading space length: 4,000 mm, loading space width: 2,140 mm, Humbaur FTK274022 G1 Used CAR TRANSPORTER Technical Specifications: * Trailer Type: Humbaur FTK274022 G1 Used * First Registration: 03/2024 * TÜV: NEW * Gross Vehicle Weight: 2,700 kg * Payload: 2,140 kg * Internal Dimensions: L: 400 cm, W: 214 cm, H: 5 cm * External Dimensions: L: 552 cm, W: 219 cm, H: 90 cm * Loading Height: approx. 61 cm * Floor: Galvanized perforated steel sheet * Lashing Points: Perforated sheet * Frame: Bolted, galvanized steel * Electrical System: 13-pin, 12V * Tires: 195/55R10C * Axle Manufacturer: AL-KO or KNOTT * Number of Axles: 2 * Braked Axle Hjdpfx Aasyw Rw Ueaenk * Support Wheel standard * Loading Ramps standard: 139 cm * Wheel Chocks: 2 * Suspension: 100 km/h approval * Winch standard Offer valid while stocks last!!! Offer only valid in Reichertshofen. All prices include VAT. Opening hours Reichertshofen: Monday to Friday from 08:00 to 12:00 and 13:00 to 17:00 Saturday and Sunday closed Visit us also at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=. You can also find your desired trailer and accessories by prior arrangement at: B L Y S S transporttechnik GmbH Burenkamp 18-20 46286 Dorsten-Wulfen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: B L Y S S transporttechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel.: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=. Please note: Images may not depict standard equipment, and technical changes (e.g., tire sizes) are subject to change.

Condition: used, maximum load weight: 2,080 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 02/2026, next inspection (TÜV): 02/2026, loading space length: 4,093 mm, loading space width: 1,864 mm, loading space height: 2,175 mm, total width: 2,374 mm, total height: 2,786 mm, Year of construction: 2026, Humbaur HTV 354018 SRA Livestock Transporter Livestock Trailer First Registration: 02/2026 TÜV Valid Until: 02/2028 FULL ALUMINIUM VERSION Year of manufacture: 2026 Overall dimensions: 5570mm x 2330mm x 2720mm Internal dimensions: 4100mm x 1870mm x 2170mm Gross weight: 3500 kg Unladen weight: 1420 kg Payload: 2080 kg Poly roof in metallic grey Partition grid, easily and flexibly adjustable 2 interior tie rings 6 exterior tie rings Rotatable and swiveling ramp Spare wheel with holder 9 ventilation flaps Hnsdpfx Aajxiuyzjajk Drainage flaps Side door left with additional cam lever locks LED rear reflectors Interior lighting Grid above rear ramp 100 km/h type approval Automatic jockey wheel V-drawbar Tyres: 185/R14C Livestock grids on both sides of the access ramp IMPORTANT!!!! PLEASE READ!!!! We expressly reserve the right to prior sale, as we also offer this item on other platforms. We strongly recommend viewing and inspection to avoid any misconceptions regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! All stated internal measurements are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Showground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday 8:30am to 5:00pm, Saturday 8:30am to 2:00pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax: