Low loader semitrailer

KÄSSBOHRER Tieflader Lowbed SLA3 Radmulde/Wheel Recess

Condition: used, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, first registration: 05/2021, loading space length: 6,850 mm, loading space width: 25,400 mm, loading space height: 350 mm, tire size: 245/70 R 17.5, color: grey, Year of construction: 2021, Equipment: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,785 mm long - Gooseneck hydraulically liftable/lowerable as well as detachable - Technical kingpin load: 23,000 kg - For tractor units: 4x2, 6x2, and 6x4 Loading Area: - Low-bed with external beams in extendable “SUPER LOW” design, approx. 6,850 mm in length Pgsdpfxjrtqylo Aarew - Low-bed section with fixed hardwood floor, approx. 40 mm thick, and pneumatically actuated locking mechanism - Supply lines are protected inside the extendable beams and automatically adapt to the respective length of the low-bed - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD lashing rings Rear Chassis: - Rear chassis with closed outer frame, checker plate covering, and continuous prism-shaped excavator trough approx. 1,250/700 x 505 mm, open at the rear Axles and Tyres: - Pendulum axles, all axles hydro-mechanically forcibly steered - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and positioning pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Axle tool kit - Tyres: 245/70 R 17.5 Braking System: - Braking system compliant with EU regulations with EBS-E, without connection lines to the tractor unit Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer - Rear section metallized and painted in RAL 9010 Included Accessories: - Prepared for bolted container locks for 1x 20' or 1x 40' containers on the external beams - One galvanized steel front wall approx. 400 mm high - At the galvanized front connection bar, yellow and red air couplings - 2 wheel chocks with holder on the front wall - Rear steering from front and rear via cable remote control with push buttons, including single-track control of the axles - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of threaded couplings - Electro-hydraulic unit - On the gooseneck and on the rear plate, left and right, a holder for warning panels incl. socket - On the gooseneck, plug-in ALU side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable - 5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area, 2 pairs in the outer frame of the chassis - Folding extensions, approx. 230 mm per side - 1 pair of steel ramps for bridging the low-bed mounting hooks - 80 km/h speed stickers at the rear and on both sides - On the warning boards, a mount for a revolving beacon - Radio remote control for rear steering in addition to the cable remote, with LED indicators on the receiver as single-track control - Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pump - Excavator dipper trough at the rear chassis closed at the rear with a plug-in plate

Condition: new, axle configuration: > 3 axles, first registration: 03/2023, loading space length: 16,160 mm, loading space width: 2,550 mm, loading space height: 3,770 mm, total length: 16,160 mm, total width: 2,550 mm, total height: 3,750 mm, suspension: air, tire size: 245 / 70 R17.5, wheelbase: 1,410 mm, color: red, Year of construction: 2022, Equipment: tail-lift, Color: Red Loading capacity: 55,200 kg Loading floor height: 89 cm Extendable Manufacturer: Goldhofer Model: STN-L 4 (245) A RM2 - Stepstar VIN: WG0STNL49N0042599 Year: 2022 – New/Unused Weights: King pin load: 18,500 kg Axle load: 12,000 kg Total axle load: 48,000 kg Gross vehicle weight (GVW): 66,500 kg Unladen weight: 11,300 kg Payload: 55,200 kg Dimensions: Length: 13,020 mm Extension: 3,140 mm Max length extended: 16,160 mm Loading floor width: 2,550 mm / 3,000 mm Loading floor height: 855 mm / 895 mm (+100 mm / -100 mm adjustment) Height: 3,755 mm King pin height: 1,300 mm Axles: Axle make: BPW Eco Plus Air suspension 1st axle liftable Axles 1 & 2: rigid Axles 3 & 4: friction-steered High/Low valve ABS Tyres: 245/70 R17.5 dual mounted Load index: 143/141J (146/146F) Additional features: - Radio remote-controlled loading ramps - Hydraulically operated loading ramps - Manual rear supports - Side extensions - Underrun protection - Wheel recesses - Wheel recess covers - 2.0'' king pin - Lashing rings - Stake pockets - Central lubrication - Oversize load marker boards - BPW landing gear - Toolboxes on the gooseneck = Further Information = Axle configuration Tyre size: 245/70 R17.5 Axle make: BPW Eco Plus Suspension: Air suspension Front axle 1: Twin tires; lift axle; Max. axle load: 12,000 kg; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Front axle 2: Twin tires; Max. axle load: 12,000 kg; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear axle 1: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Weights Unladen weight: 11,300 kg Payload: 55,200 kg GVW: 66,500 kg Functional Podpfxjuu Hgdo Aaregw Tail lift: Goldhofer Extendable chassis: Yes Condition General condition: very good Technical condition: very good Optical condition: very good Damages: none Financial information Price: On request For further information, please contact Stefan Schaapveld.

Condition: new, maximum load weight: 49,000 kg, overall weight: 60,800 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with beveled corners at the front 45° and with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area in extendable version: -Loading surface in extendable version with rear bevel of approx. 1,000 mm x 8° -5 pairs of lashing rings can be folded outwards (LC 5,000 daN) -3 pairs of lashing rings can be folded outwards (LC 10,000 daN) -1 pair of lashing rings lying in the front of the cargo bed (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps. (LC 2,000 daN) -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Removable two-part ramps: -A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking -Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable -Maximum load per pair: 40,000 kg Seat posts: -JOST fifth wheels (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles, two axles rigid two axles self-steering, air-suspended, with drum brake, with lifting/lowering function The self-steering axles with electro-magnetic reverse lock can be activated via reverse gear or manually -axle tool Pgodpfx Aaeh Etf Rsrow -235/75 R 17.5 tires Brake system: -brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: -steel construction made of high-strength fine-grained steels -Steel grades: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Coating: -First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in nova grey Electrical system: -Electrical system in accordance with EU regulations, 24 volt ASPÖCK-NORDIK lighting (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Accessories included: -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -One spare wheel with holder in front of the bulkhead -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking ramps -Galvanized folding supports under the bevel of the cargo bed -One bracket for a rotating beacon -Cover plates to bridge the gap between ramps and cargo bed -White reflector tape in accordance with EU regulations on the sides, on the extension and red at the rear -Electric hydraulic unit -On the gooseneck and on the ramps on the left and right a holder for the warning signs including socket -Control valves for the ramps mounted on the right-hand side of the trailer -One mud flap at the rear of the trailer -Manual and description on USB stick -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) -4 pairs of WADER container pockets in the loading area for one 20ft, 2x 20ft or one 40ft container -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Galvanized extensions, extendable by approx. 230 mm per side -Lift axle on the front axle with controls -Square climbing rails 20 x 20 mm -BEKAMAX central lubrication system -Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: Pjdpfx Aashlz R Sersgw -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: excellent (used), axle configuration: 3 axles, total length: 15,700 mm, total width: 2,750 mm, total height: 1,290 mm, suspension: air, tire size: 245/70R17.5, color: orange, Year of construction: 2010, Color: Orange Loading capacity: 40,600 kg Loading floor height: 54 cm Extendable Braked Main Features Manufacturer: Goldhofer Model: STZ VKL3 34/80 A Chassis Number: WG0STZV3590030501 Year of manufacture: 2010 Weights/Loading Capacity Fifth-wheel load: 24,000 kg Axle load: 11,200 kg Total axle load: 33,600 kg Gross vehicle weight (GVW): 57,600 kg Unladen weight: 17,000 kg Payload: 40,600 kg Axles Pedpeuu Hifefx Aarjgw Axle make: BPW ECO Air suspension All axles hydraulically steered High/Low valve AGS / ALB / ABS Tires: 245 / 70 R17.5, twin mounted Load index: 143/141G Dimensions Length: 15,700 mm – 26,000 mm Loading floor length: 6,600 mm Extension: 4,300 mm Extension beams: 6,000 mm Max. loading floor length: 16,900 mm Loading floor width: 2,750 mm Beam thickness: 380 mm King pin height: 1,295 mm Additional Information Operated via truck hydraulics Lashing rings Hydraulically operated gooseneck Detachable gooseneck Oversize load marker boards Rear bumper with lights King pin: 2.0'' Central lubrication Removable floor panels 4x extension crossbeams Toolbox at gooseneck = Further Information = General Information Year of manufacture: 2010 Axle Configuration Tire size: 245/70R17.5 Axle make: BPW ECO Suspension: air suspension Rear axle 1: twin tires; max. axle load: 11,200 kg; steered Rear axle 2: twin tires; max. axle load: 11,200 kg; steered Rear axle 3: twin tires; max. axle load: 11,200 kg; steered Weights Unladen weight: 17,000 kg Payload: 40,600 kg Gross vehicle weight: 57,600 kg Functional Loading floor height: 55 cm Extendable body: Yes Condition Technical condition: very good Optical condition: very good Financial Information Price: On request

Condition: new, axle configuration: 3 axles, Equipment: ABS, Availability: approx. 4 months after receipt of order! Kässbohrer 3-axle low loader, rigid / not extendable, NEW VEHICLE Axles / brake system: # BPW axles with drum brakes 17.5" # 3rd as self-steering axle # 1st axle as lift axle # WABCO brake system 4S/3M # 13 x branded tires 245 / 70 / 17.5" on steel rims Low loader: # Fifth wheel height: 1250 mm # Low bed length: 9,240 mm # 7 x 2 stake pockets 52 x 102 mm # Lashing eyes gooseneck: 1 x 2 10 tonnes, 2 x 2 5 tonnes # Lashing eyes rear platform: 3 x 2 10 tonnes, 4 x 2 5 tonnes # Extra-wide brackets 300 mm extendable # Hardwood floor 45 mm # Color: RAL 3020 traffic red Ramps: # hydraulically movable ramps with 40 mm hardwood floor # 4,200 mm long x 850 mm wide x 9° ramp angle # Electro-hydraulic pump 2kW # NATO socket for operating the electro-hydraulics including cable Other: # 4 x over-width signs with bracket for rotating beacon Pgedpfx Ajht Tt Hoarew # 1 x tool box on the right in the direction of travel # JOST full trailer support at the front # manual rear support galvanized # 2 inch kingpin + 2nd position for kingpin # 24V lighting system Aspöck # E-bike holder with spare wheel

Condition: new, axle configuration: > 3 axles, total length: 9,300 mm, total width: 2,540 mm, suspension: air, tire size: 245/70 R17.5, wheelbase: 1,360 mm, color: blue, Year of construction: 2023, Equipment: tail-lift, Colour: Blue Payload: 54,465 kg Main Features: Manufacturer: Faymonville Model: MAX 110-Z-4AA-9.30-U Chassis Number: YAMT14XX4N0107629 Year of Manufacture: New and unused (2023) Weights / Payload: - King-pin load: 23,000 kg - Axle load: 12,000 kg - Total axle load: 48,000 kg - Gross vehicle weight (GVW): 71,000 kg - Unladen weight: 16,535 kg - Payload: 54,465 kg Axles: - Axle make: BPW - Hydraulic steering - Pneumatic suspension with lifting/lowering valve - WABCO brake system - Tyres: 245/70 R17.5 – Michelin (Load index: 146/146 F) - 1st axle liftable Dimensions: - Load length: 9,300 mm - Extensions: 6,500 + 6,800 mm - Load platform width: 2,540 mm - Load height: 900 mm Additional Information: - Double-extendable loading platform - Container locks - Width outriggers + wooden outriggers for extension - Lashing rings - Pair of double-folding loading ramps - Central lubrication - 1x spare wheel with holder - JOST landing gear - 24 Volt electrical system - 2.0'' king-pin - One galvanised steel front wall - Electrically driven hydraulic pump Pedpfxsuu Hcfo Aarjgw - Manual steering - Twist locks = Further Information = General Information Year of manufacture: 2023 Axle configuration Tyre size: 245/70 R17.5 Suspension: Air suspension Rear axle 1: Twin tyres; Lift axle; Max. axle load: 12,000 kg; Steered; Axle make: BPW; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Weights Unladen weight: 16,535 kg Payload: 54,465 kg Gross vehicle weight: 71,000 kg Functionality Load platform height: 655.35 mm (Note: Please verify source, as figure seems inconsistent) Extendable body: Yes Condition General condition: Very good Technical condition: Very good Optical condition: Very good Financial Information Price: On request Further Information Please contact Stefan Schaapveld for more information.

Condition: good (used), functionality: fully functional, empty load weight: 7,100 kg, maximum load weight: 29,600 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 06/2004, loading space volume: 27 m³, suspension: air, tire size: 315.80 r 22.5, color: white, Year of construction: 2004, Equipment: ABS, sem Andreoli tipping tank 27m3 round steel, 8mm bottom 7mm walls, 10 tires 315.80 r 22.5, 3 disc axles with 1st lift + steering, abs, air suspension, manual sliding cover Cramaro, ebs, tilting rear door with pneumatic stops and finisher, tool box, front cylinder with hydraulic couplings, year 2004, inspected until 05/31/2026 - INTERDRIVE SRL DEALER - PARMA Pgsdewq Ef Topfx Aarow

Condition: new, maximum load weight: 33,440 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,550 mm, loading space height: 2,900 mm, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, WhatsApp SCHWARZMÜLLER 3-AXLE STANK SEMI-TRAILER NEW VEHICLE AVAILABLE IMMEDIATELY!! Tractor data and equipment 4,500 mm maximum distance from tractor front edge to fifth wheel center 2,240 mm minimum free front distance from fifth wheel center 1,900 mm max. rear turning radius Total train weight (permissible) 44 t in front and rear traffic or with special permit Total weight (technical) 39 t Axle unit load (technical) 27 t Fifth wheel load (technical) 12 t Dimensions Frame length approx. 13,000 mm Total width max. 2,550 mm Loading height front+rear approx. 1,340 mm Semi-trailer horizontal position at approx. 1,150 mm Loading height approx. 1,510 mm Welded steel frame construction Lightweight frame made of high-strength fine-grain steel Straight frame design, all stakes on the frame mounted Frame height at the front approx. 190 mm (without stakes) Replaceable 2" kingpin Frame for fifth wheel height unloaded approx. 1,150 mm - approx. 1,250 mm, with air-sprung tractor unit Screen-printed plate cover 12 mm between the longitudinal members, screwed, extended at the front to approx. support winches (to protect the tractor unit) and at the rear above the chassis, flush with the upper edge of the longitudinal member Support winches, 2 x 12 t, one-sided operation on the right, thrust compensation, Reinforced cross brace, for loading/unloading when the vehicle is uncoupled 3x SAF-Intradisc-Plus integral axles with disc brakes ø430 mm (22.5" disc), Load capacity 9 t/axle, reinforced axle body, off-road version Axle spacing 1,310 + 1,410 mm Axle lift on 1st axle, raises and lowers automatically depending on weight, with forced lowering and speed-limited starting aid for button operation in the driver's cab and operation via "3 x brakes" 6 x 385/65 R 22.5, 164K steel rims 11.75 x 22.5, ET120 mm, silver Brake system in accordance with EC Directive 71/320 or ECE R13 Two-line compressed air brake system as selected by the factory EBS system 2S2M, one axle sensed RSS - stability program Spring-loaded parking brake on 2 axles Aluminum air tank Brake/air connections with 2 individual coupling heads yellow/red EBS/ABS socket at the front Air suspension with lifting and lowering device Automatic adjustment to programmed driving level from 15 km/h Bellows diameter 360 mm Pgodpfsn Hrg Rjx Aarsw SWIT - Schwarzmüller Intelligent Telematics, "LOCAL TRAC" performance package Axle load display via EBS CAN bus signal for display on display in the driver's cab Extra-strong steel profile front wall approx. 2,500 mm high, with 2 stable center supports, corners beveled at the top approx. 300mm/45° Rail posts attached/replaceable, division: approx. 600 mm, then every 2,400 mm 6 pieces of Exte 144 stanchions, with screwed bracket clamp fastening Rail inclination approx. 0.8° inwards (also suitable for lumber transport) 6 pairs of Exte 144-S stanchions with screw fastening, 2-part telescopic stanchions, load capacity per stanchion pair max. 7t, coated in original signal color orange Telescopic key for operating the Stanchions Stanchion loading height = max. approx. 2,800 mm 8 gripper deflector plates approx. 200 mm long, between the stanchion posts, on the side 6 pairs of lashing hooks on stanchion posts 24-volt lighting system in accordance with EC Directive 76/756/EEC 2 FULL-LED five-chamber tail lights "Aspöck" with integrated ballast 2 LED position lights at the front 2 LED outline lights at the rear Flashing LED side marker lights, controlled by indicator signal 2 license plate lights 2

Condition: like new (used), mileage: 70,000 km, Year of construction: 2023, Volvo FMX 510 8x4, year 2023, Euro 6, 70,000 km, rear tipper body, hydraulic tailgate, tarpaulin with open/close mechanism. Pjdpfx Aexvzf Rjarsgw