Hoet Trailers

Hoet Trailers

Condition: new, axle configuration: 3 axles, color: other, Unladen weight: 10,500 kg Lhjdey A Irgspfx Akkon Payload: 45,500 kg Gross vehicle weight (GVW): 56,000 kg Damage: none

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,350 kg, maximum load weight: 33,650 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,650 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information: Chassis, semi-trailer tipper Fine-grained steel welded construction, in basic lightweight design, trailer plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, uncoupling with load is not possible; when uncoupled, the vehicle must be tilted backwards. Wedge blocks with holder Rear underrun protection, foldable Half-shell fenders Integrated fender holder, surface repels stones Tarpaulin rod with holder Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Ledpfx Aji Ri Dpekkohn Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display on the towing vehicle's display, via EBS, without installation in the truck (this must be available in the truck). Only on standard tires. Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides linked to the turn signal ("flashing side lights") 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinders with access ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a hinged flap with double-hinge hinge, externally mounted with double hook lock. 2 clamping screws with lever locks on the lower side. Side walls continuous, 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with access ladder, connection plate for air/electricity and brake with large clearance for best possible operation. Roller cover on one side for placement on the right side, with central locking on the left side Country of registration / signs Germany Type approval according to EC 2007/46 Superstructure strength according to EN 12642 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust-through" Support legs galvanized Body RAL desired color, solid color Roller cover RAL 7035 light gray

Condition: new, axle configuration: 2 axles, suspension: steel, color: other, Suspension: leaf spring suspension Rear axle 1: Tyre tread left: 100%; Tyre tread right: 100% Rear axle 2: Tyre tread left: 100%; Tyre tread right: 100% Damages: none Lhsdpoyzgmmsfx Akken

Condition: new, axle configuration: 3 axles, suspension: air, color: other, Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 2: Tire tread depth left: 100%; Tire tread depth right: 100% Lhedszx Slaspfx Akksn Rear axle 3: Tire tread depth left: 100%; Tire tread depth right: 100% Damage: None

Condition: new, maximum load weight: 29,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total width: 2,550 mm, Vehicle is from ongoing production – available in approx. 2 weeks Vehicle / Body: Tipper body Gross weight: 35,000kg / 39,000kg Tare weight: 5,500kg!!! Payload: 29,500kg / 33,500kg Overall length: 8,600mm Volume: 25 cbm Further Information: - Overall height approx. 3,160mm - Internal width approx. 2,350mm - Fifth wheel height approx. 1,200mm Chassis Semi-Trailer Tipper: - Fine-grain steel welded construction, in basic lightweight design - 1x central landing gear leg - Retractable underrun protection - Underrun protection with “spring assist” for easier operation - Half-shell mudguards - Integrated "mudguard bracket" with stone-repellent surface - With anti-spray mudflaps only on the last axle - 2 towing hooks at the rear Axles & Suspension: - SAF disc brake axles with 430 mm disc diameter Lodpfxjvhyf Rj Akkehn - "Axle/chassis laser alignment" for reduced tire wear and lower fuel consumption - Axles in off-road specification - Air suspension - Air bag pressure gauge, mounted at the front on curved chassis - 1st axle with automatic lift axle, additionally controllable electrically from the truck, including forced lowering and start-up aid, no truck installation required (Start-up aid function up to 30% axle overload and up to a speed of max. 25 km/h) Braking System: - 2-line compressed air braking system Color-coded line routing for easier service. - Spring-loaded parking brake - 2 foolproof coupling heads at the front, without connecting line - 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable - With lift & lower valve - Vehicle stability control system - Automatic tipping lowering with shut-off valve Wheels and Tyres: - 6 x 385/65 R22.5” European brand, manufacturer’s choice Electrics: - 24 Volt, multi-chamber LED lights, side yellow LED lighting, LED license plate lighting (Note: Some towing vehicles may display fault codes despite full functionality) - Side yellow LED lighting linked to indicator "flashing side marker lights" - Premium LED side marker lights, each with 20 LEDs per light - 2 white front position lights, LED included - 2 white/red lane position lights at the rear, LED included - 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without connecting cable - LED work lights both sides (switched via reversing light) - 2 additional LED work lights, recessed at rear Hydraulics: - High-pressure cylinder max. 250 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed section, NW 48 mm - Manufacturer Hyva - Operation hydraulic via truck PTO - Hydraulic connection with hose and vehicle screw connector NW = 54 mm with large wing nut Body: HARDOX steel round tipper body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount. Interior with access at front wall. - Greenline – conical and aerodynamic body design - External shovel and broom holder at front wall - "Membrane" rear wall - Rear wall as pendulum tailgate with "double joint hinge", external, with dual hook locking. 2 clamping screws with toggle locks at lower side - Rear wall with rubber seal Note: Heat resistant up to max. 170°C! - Side walls continuously 4 mm thick, floor 4/5 mm thick, wear and weight-optimized construction - Fliegl S.T.E.P. – swiveling standing platform at the front with foldable access ladder for side entry front left

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902032084, empty load weight: 4,140 kg, maximum load weight: 33,860 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,240 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: white, 25 m³ Aluminium Tipper Body Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. --- ## Wheels * Alcoa Dura-Bright aluminium wheels --- ## Axles & Suspension * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid * Traction aid activated via “3x braking” * Function active up to 30% axle overload and max. 25 km/h * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust --- ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 1 × 15-pin front socket (without connecting cable) * 2 integrated rear LED work lights, activated via reverse gear --- ## Hydraulic System * High-pressure tipping cylinder, max. 250 bar * Hard-chrome plated first stage * HDK screw coupling, fixed section, NW 48 mm (without hose connection) * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut * Cylinder transferred from the replaced vehicle --- ## Tipping Body – Aluminium Box Body (25 m³) * High-quality wear-resistant aluminium body construction * Sloped 5 mm front wall with external hydraulic cylinder mounting * Side walls made of 30 mm hollow chamber profiles, fully welded * Upper edge profile designed to prevent material build-up * Internal access ladder at front wall (not compatible with Cramaro system) * External shovel and broom holder on front wall * Aerodynamic tapered “Greenline” body design ### Tailgate * “Membrane” rear wall with double-joint hinge system * Externally mounted pendulum tailgate with double hook locking system * Rubber-sealed tailgate * Heat resistant up to max. 170°C ### Floor & Equipment * Continuous 6 mm steel floor * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation Lodpfx Aowhfiyekkjhn * Sliding tarpaulin system, one-sided storage (right-hand side driving direction) * Central locking on left-hand side --- ## Paint / Finish * Aluminium natural finish (body) * Galvanised or coated components depending on specification --- Optional Note: The cylinder shown may originate from a previous vehicle and is reused depending on configuration.