Tipper semitrailer

BENALU Agriliner 60m³ Kipper Liftachse Getreidekipper

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform: Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Tjdpfxjl Sl Izs Agmsc Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Tires 235/75 R 17.5 3PMSF Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the bulkhead 2" kingpin One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor

Condition: excellent (used), first registration: 08/2008, color: green, Year of construction: 2008, Extendable body: Yes Tedpfx Aeykz Uiegmsc Technical condition: very good Visual condition: very good

Condition: new, functionality: fully functional, empty load weight: 6,495 kg, overall weight: 39,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, loading space volume: 60 m³, total length: 13,060 mm, total width: 2,530 mm, suspension: air, tire size: 385/65, tire condition: 100 %, ground clearance: 4,000 mm, Year of construction: 2026, NEW – AVAILABLE FOR IMMEDIATE DELIVERY Kassbohrer Silo 60 m³ – SSK 60 Silo for the transport of FLOUR, GRAINS, SUGAR, RICE, CEREALS, and PLASTICS Volume: 60 m³ Length: 13,060 mm Unladen weight: 6,495 kg BPW axles, 1st axle liftable 5 manway access points Storz end coupling Aluminum rims Tjdpfx Agszcaausmoc Pneumatic railing lifting system Electropolished discharge cone

Condition: new, empty load weight: 6,400 kg, maximum load weight: 39,000 kg, axle configuration: 3 axles, total length: 10,600 mm, total width: 2,410 mm, total height: 2,200 mm, suspension: air, Year of construction: 2025, load capacity: 32,600 kg, • Volume 57.3 m³ • Aluminium rims • Spare wheel carrier • Side tarpaulin • Universal twin rear doors • 2 hatches Tjdpfx Asx Hkw Tjgmsc • Aluminium walkway • Liftable first axle • 4 LED work lights • PVC storage box • Tool holder • Aluminium ladder 3.5 m • Automatic suspension lowering • Towing eye • Coupling height 1170 mm • Floor 6 mm • Side walls 4 mm • Water tank 50L • Internal dimensions: 10.60 x 2.41 x 2.20 m

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,410 mm, loading space height: 2,300 mm, loading space volume: 54 m³, Year of construction: 2025, Equipment: ABS, !!FOR SALE, FOR RENT OR RENT WITH PURCHASE OPTION UPON AGREEMENT!! Approx. 52 m³ Grain Tipping Trailer, Aluminum - Manufacturer: Benalu - Model: Grain Tipping Trailer - Year of Manufacture: NEW VEHICLE - Volume: approx. 54 m³ (9.50 m long x 2.41 m wide x 2.30 m high) - Gross Vehicle Weight: 39,000 kg - Unladen Weight: approx. 5,600 kg - Axles: 3 axles / disc brakes - Tires: 385/65 R22.5 on Speedline aluminum rims Tedjtf Sahjpfx Agmoc - Suspension: Air suspension with raise/lower function - EBS Wabco - Combination door (swing doors and pendulum tailgate) - Pneumatic unlocking of the pendulum tailgate during tipping - 2x grain discharge chutes - 5mm floor - Individual wheel mudguards - Unladen support leg - Folding underrun protection - Load pressure gauge - Operator platform at front - Rolling tarpaulin - Toolbox German vehicle!! German papers!! FOR SALE, FOR RENT OR RENT WITH PURCHASE OPTION UPON AGREEMENT!! Images are for reference only!!

Condition: new, maximum load weight: 96,500 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, loading space length: 26,900 mm, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: * Hydraulically extendable/retractable and lowerable gooseneck. Length approx. 3,650 mm Tsdpfx Ajzahp Sjgmsc * For semi-trailer with multiple axles (SZMs): 6 x 4 or 8 x 4 * Truck hydraulic connection with flow control (20 l/min), incl. gantry for suspending the supply lines, the SZM tank must have a minimum capacity of 80 l * With MAX Trailer coupling parts, otherwise coupling parts must be supplied by the customer * Gantry with winch for spare wheel on the front of the gooseneck * 3.5-inch kingpin * Steel front panel approx. 400 mm high * Plug-in aluminum side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish * Control levers on the gooseneck protected by a folding cover * Lighting for the controls on the gooseneck with on/off switch * A 7-pin socket on the left and right at the rear of the gooseneck for the warning sign * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * Hydraulic connections from the gooseneck to the low-bed with screw couplings * Access to the gooseneck * Four warning signs that can be extended by approx. 1,000 mm, approx. 423 x 423 mm, with an LED position light and a mounting bracket for a rotating beacon * Mounting adapter for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Power: 9.5 kW (12.9 hp) at 3000 rpm * Hydraulic connection lines between the power pack and the connector plate on the gooseneck * 1 LED work light on the left and right at the rear of the gooseneck with separate on/off switch * Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of the trailing axle steering, in addition to the cable remote control, with 2 LED indicator lights on the receiver as a single-axle control. - Operation of raising/lowering the gooseneck - Operation of raising/lowering the suspension of the chassis 2-axle front bogie: * Bolt-on coupling at the front and rear. Length: approx. 2,970 mm. Chassis width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle chassis with standard grease NLGI-2. (not connected to the track rods) * A 7-pin socket on the left and right at the rear of the front bogie for the warning signs * Surface of the chassis with a sand-blasted coating for slip resistance * Yellow reflector tape according to EU regulations on the side, on the extension, and at the rear of the trailer * A 7-pin socket for the warning signs, on the left and right on the front chassis, in the area of the axles * Extendable widening elements by approx. 230 mm on each side for a 2-axle chassis * 1 pair of M42 threaded blocks between the axles of the front bogie * 1 pair of brackets for the warning signs for insertion into the pocket recesses in the outer frame of the loading platform Loading platform: * 6-axle double-extendable loading platform with bolt-on coupling at the front and a slope of approx. 500 mm x 8° at the rear * Loading platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Basic width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the loading platform with standard grease NLGI-2 * Surface of the loading platform with a sand-blasted coati

Condition: used, power: 312 kW (424.20 HP), axle configuration: 4x4, Year of construction: 2018, operating hours: 9,991 h, Equipment: all wheel drive, = Additional options and accessories = - AdBlue system = Notes = Used Caterpillar 980M Wheel Loader – 2018 – For Sale at BIG Machinery This Caterpillar 980M wheel loader is now available for sale at BIG Machinery in the Netherlands. Built in 2018 in France, this machine has 9,991 operating hours and is CE certified. It is powered by a CAT C13 engine and equipped with 4x4 drive, an unused bucket, joystick steering, air conditioning, automatic lubrication, and AdBlue. The machine complies with Stage 4 emission standards. • Model: Caterpillar 980M • Year: 2018 • Made in: France • Hours: 9,991 • Engine: CAT C13 • CE certified • Stage 4 • 4x4 drive • Unused bucket attached • Joystick steering • Air conditioning • Michelin tires • AdBlue • Auto lube Interested in this Caterpillar 980M? Contact BIG Machinery for more information, inspection details, or a quotation. We deliver worldwide and can arrange complete export documentation and transport from our headquarters in the Netherlands. Why Choose BIG Machinery? At BIG Machinery, you benefit from over 30 years of experience in the trade of new and used machines. With our headquarters in the Netherlands, a dedicated and cohesive team, and extensive expertise in sea transport, we ensure reliable and fast delivery worldwide. We stand out with our competitive market prices, carefully selected machine quality, and the assurance of a long-term partnership. With our own transport services, we provide seamless and efficient service from start to finish. Choose BIG Machinery as your trusted partner and discover why we are the preferred choice for customers worldwide. Quality, speed, and reliability – Buy BIG! = Further information = AdBlue system: Yes Dimensions (L x W x H): 950 x 330 x 390 cm CE marking: Yes Serial number: CAT0980MAWW300236 Todpszz Sw Uefx Agmsc

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space volume: 52 m³, Year of construction: 2025, !!FOR SALE, FOR RENT, OR RENT WITH PURCHASE OPTION UPON AGREEMENT!! Benalu Agriliner 9500 approx. 52 m³ grain tipping semi-trailer, full aluminum construction/ribbed frame with combination tailgate --- * Manufacturer: Benalu * Model: Grain tipping semi-trailer * Year: NEW VEHICLE * Gross technical weight: 39,000 kg * Unladen weight: approx. 5,400 kg * Capacity: approx. 52 m³ * Axles: 3x axles / disc brakes * Tires: 385/65 R 22.5 on Speedline aluminum rims * Suspension: Air suspension with lifting/lowering device * Color: Tipping body and chassis in natural aluminum / blue tarpaulin * EBS Wabco * Universal tailgate (pendulum flap and double-wing doors) * 2x grain discharge slides * Pneumatic release of pendulum flap when tipping * Load gauge * Floor: 5 mm * Aluminum landing legs * Front operator platform with access ladders left and right * Manual roll tarp * Roof bows built with curve (roof-shaped) * 3.5 m aluminum ladder Tjdpfxoxl Nt Is Agmsc German vehicle! German documents! The photos are archive images!

Condition: used, maximum load weight: 32,780 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2023, next inspection (TÜV): 01/2027, loading space length: 11,418 mm, loading space width: 2,475 mm, loading space height: 2,390 mm, loading space volume: 65 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, * Platform with ladder and roll cover * 1st axle can be lifted * Portal swing doors with grain slide ----* LED tail lights * Aluminum storage boxes * Underrun protection * Alloy wheels Tjdjy Ubnxjpfx Agmsc ----* JOST axles with disc brakes * HYVA hydraulic system * Wabco SmartBoard unit * Wabco Trailer EBS-E ----* Tire size: 385/65R22.5 * Technically permissible total weight: 39,000 kg * Tare weight: 6,220 kg * Overall length: 12,830 mm * Wheelbase: 8,760 mm * Next inspection due: 07.2026 ----Vehicle number: 12083----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/inspection approval, complete export handling, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport.----Your VTS team