Low loader semitrailer

MEUSBURGER MTS-3 Bridge Ramps Winch Remote Control Steering

Condition: new, maximum load weight: 31,500 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, Wiese 3-axle semi-trailer with lift table and fold-down rear. Ideal for transporting forklift trucks and/or work platforms. Technical data. 3 x 10 to. axles Lift axle Steering axle Smart Steering (steers forwards and backwards) Outer beam chassis with slope 18-tonne neck design suitable for 2- and 3-axle semitrailer tractors Lifting table hydraulically movable in 3 positions Rear in folding rear design incl. hydraulic extensions, can be used as drive-on ramps, drive-over ramps or as a loading area (overall length reduction when rear is raised) Remote control for ramps and lift table Front wall Csdpfx Aasvw Hmtoferi Grid floor Numerous lashing points SmartBoard Central lubrication system Spray-galvanized and painted steel construction Numerous optional extras are available: e.g: Cable winch Storage box on the saddle step aluminum rims Further information on request.

Condition: good (used), mileage: 28,063 km, color: blue, Year of construction: 2019, operating hours: 4,535 h, Manufacturer: Liebherr Type: LTF 1045-4.1 Year: 2019 Crodpszb D Rhjfx Aafei Capacity (t): 45 t Main boom: 35 m Jib: 9.5 m Kilometers: 28,063 km Crane hours: 4,535 h Counterweights: 9 t

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-Axle MULTIMAX "PLUS" semi-trailer, air-suspended and with hydraulically forced steering axles. Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h (legal) Total weight: 49500 kg / 31500 kg Fifth wheel load: 18000 kg Axle load: 31500 kg / 31500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin offset to rear approx.: 2,100 mm Fifth wheel height loaded approx.: 1205 mm Platform length approx.: 9,600 mm Extendable by approx.: ? Platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Codpfx Aaoizu Ntoferi Suspension travel approx.: -55 / +145 mm Axle spacing: 1,360 mm Total weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific regulations. Technical description Gooseneck: Gooseneck in SNT design to optimize platform length, length approx. 3,900 mm, rear with a bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor-trailer combinations: 4 x 2 and 6 x 2. Platform: Platform, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6°. Platform behind the gooseneck can be hydraulically raised and lowered, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-piece AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm. Open grating deck. Hydraulically folding ramp ends. Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 365 mm. Maximum load and angle of inclination according to technical data sheet: C470319 Maximum inclination angle with lowered platform: 9° Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tool. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer according to our choice Load index 143/141J (144/144F) Braking system: Braking system of the brand WABCO EBS-E according to EU regulations. Without connection cable to the tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" design according to EU regulations. (ASS 3) Metallization: Complete HRM metallization (High Resistance Metallization) Complete steel structure shot-blasted, then hot-dip galvanized with ZINACOR 850 (Zinc 85% - Aluminum 15%). Painting: 6-coat finish: Complete steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion primer. Top coat with 2 coats of 2-component paint (acrylic), solid color in RAL colors of your choice, followed by sealing of the cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra cost. Steel structure: Steel structure made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders tested according to DIN-EN 287-1. Welding process MAG according to EN ISO 4063. Protective gas M21 according to EN ISO 14175 Front wall made of steel, plug-in, approx. 400 mm high Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the connection strip at the front with sockets 24N, 24S & 15-pole. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pole connection according to ISO-12098 If your pin assignment differs from the ISO connection standard, please inform us. "Anderson" socket on the connection strip at

Condition: new, maximum load weight: 38,953 kg, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Total weight: 49,500 kg Saddle load: 18,000 kg Axle load: 31,500 kg Unladen weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck length: 3850 mm Saddle height loaded: 1200 mm Loading platform length: 9300 mm Extendable by: 0 mm Axle distance: 1360 mm Rear deflection radius: 2300 mm Loading height at max. load: 860 mm Overall width: 2540 mm Suspension travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with beveled front corners at 45° and a rear bevel of approx. 750 mm x 10°. Crodjg Sk Tropfx Aafji 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, 30 mm thick. Loading platform: Loading platform after the gooseneck, hydraulically raisable and lowerable, length approx. 2,800 mm, with a rear bevel of approx. 1,000 mm x 8°. 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings that can be folded inwards on the central beam at the front (LC 10,000 daN). Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN). Hardwood flooring approx. 48 mm thick, with non-slip steel plate flooring over the axles. Ramps: Two-piece steel ramps, one pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood flooring. Ramp with hydraulically raising and folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable. Maximum load per pair: 40,000 kg Kingpin: JOST kingpins (mechanical) with a 2-speed gearbox for a 24t lifting capacity (50t test load). Tires: Tires 235/75 R 17.5, as selected by the manufacturer. Axle: SAF axles, air-suspended, with drum brakes, with raising/lowering function. The last axle is steered with an electro-magnetic reverse steering lock, which can be activated via reverse gear or manually. Axle tool. Braking system: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel structure: Steel structure made of high-strength fine-grained steels. Steel qualities: S355J2+N / S355MC (yield strength 355 MPa) S690QL / S700MC (yield strength 690 MPa) Painting: First-class and durable corrosion protection of the standard bead-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat in a single color in RAL colors of your choice. Rear part metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Electrical system: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection bar at the front with 24N, 24S & 15-pin sockets. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories 2" kingpin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connection bar at the front. 4 pieces of wheel chocks with holders on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or the electric winch (35mm², 3.5 m long, max. 250A) between the semi-trailer and the tractor unit with plug connection (ANDERSON-ANDERSON) Galvanized folding supports under the bevel of the loading platform. One bracket for a rotating beacon on the rear of the semi-trailer. Operating valves for the ramps mounted on the right side of the semi-trailer. (± 4 kg) Yellow reflector tape according to EU regulations on the side and r

Condition: good (used), first registration: 03/2017, Equipment: tail-lift, Year of manufacture: 2017 Crjdpfxjzlt Hrj Aafei GVWR: 48,000 kg Technical condition: good Optical condition: good Damage: none

Condition: new, functionality: fully functional, machine/vehicle number: NRKPARSB07RA3XXXX, empty load weight: 5,600 kg, maximum load weight: 24,000 kg, axle configuration: 1 axle, tire size: 245/70 R 17,5 C (143/141 J), wheelbase: 7,550 mm, Year of construction: 2024, Equipment: ABS, We offer truck semi-trailers for hire or sale: from €1,350 ex VAT per month. Rental with possibility of maintenance included (see contract). Short, medium or long-term rental at your convenience. Possibility of rental by : Day / Week / Month / LDD. Additional information : Single axle - 4+1 SAF wheels Pneumatic + EBS (Wabco 2S2M) Stowable ramps Hydraulic winch Storage box Dimensions : Length: 11.46 m Width: 2.55 m Height: 1.6 m Options : ABS Credpou Dkk Hefx Aafji EBS Mass in running order: 5,600 kg Distribution of this weight between axles: CP: 2,000 kg / 1: 3,680 kg Technically permissible maximum laden mass: 24,000 kg Technically permissible mass on each axle: CP : 15,000 kg / 1 : 9,000 kg Technically permissible mass on each group axle: 15,000 kg Approval number or approval mark of coupling device: OMS-E20 55R-01 3753 Contact us for a rental quote or more information.

Condition: used, empty load weight: 5,600 kg, maximum load weight: 18,400 kg, overall weight: 24,000 kg, axle configuration: 1 axle, first registration: 01/2024, suspension: air, tire size: -, Year of construction: 2024, Equipment: ABS, ref: LOC-MOD24-103 We offer truck carrier semi-trailers for rental and sale: Starting from €1,350 (excl. VAT) per month. Rental with maintenance option available (see contract). Short, medium, or long-term rental according to your needs. Flexible rental periods: Day / Week / Month / Long-Term Lease. Additional information: - Single axle - 4+1 SAF wheels - Pneumatic system + EBS (Wabco 2S2M) - Stowable ramps - Hydraulic winch - Storage box Unladen weight: 5,600 kg Weight distribution between axles: KP: 2,000 kg / 1: 3,680 kg Maximum technically permissible laden mass: 24,000 kg Technically permissible mass per axle: KP: 15,000 kg / 1: 9,000 kg Technically permissible mass per axle group: 15,000 kg Crodpfxouy T Dus Aafoi Approval number or approval mark of the coupling device: OMS-E20 55R-01 3753 Contact us for a rental quote or more information. Tyre specifications: 245/70 R 17.5 C (143/141 J) Deck area: 29.223 m² Width: 2.55 m Height: 1.6 m ABS Serial number: NRKPARSB07RA3XXXX Condition: New

Condition: used, axle configuration: 3 axles, first registration: 10/2008, color: other, Equipment: ABS, = Additional options and accessories = - Air suspension - Steering axle = Remarks = Broshuis, 2008, SAF axles, As 3 sent, Extendable = More information = Year of construction: 2008 Rear axle 1: Steering = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U Credpfjzn Ariox Aafoi - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: excellent (used), functionality: fully functional, empty load weight: 11,700 kg, maximum load weight: 33,300 kg, overall weight: 48,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 07/2019, total length: 13,980 mm, total width: 2,550 mm, total height: 3,630 mm, suspension: air, tire size: 235/75R17,5, wheelbase: 1,310 mm, maximum speed: 90 km/h, color: orange, trailer brake: trailer braked, Year of construction: 2019, Equipment: ABS, MEUSBURGER MTS-3 Low loader trailer, single owner, workshop maintained, and in very good condition! New TÜV inspection, 3x BPW ECO axles with air suspension, Cjdpjzv Ianefx Aafori 1 axle can be lifted, 3rd axle as a friction-guided trailing axle with electric and mechanical lock. Steering of the 3rd axle via two hydraulic cylinders to enable maneuvering using a remote control, Total weight (2-axle configuration) 48,000 kg, Total weight (3-axle configuration) 57,000 kg, Payload (2-axle configuration) 28,500 kg, Payload (3-axle configuration) 36,000 kg Fifth wheel load 18,000 kg, Rear axle load 30,000 kg, Unladen weight 11,700 kg, Overall width 2,550 mm, Length of gooseneck platform approx. 3,950 mm, front bevel approx. 500x56 mm, Length of low-bed platform approx. 9,750 mm, rear bevel approx. 1,000x100 mm, Loading height approx. 920 mm, Fifth wheel coupling height approx. 1,150 mm, Front outrigger supports, Hydraulic rear supports powered by an electro-hydraulic unit for the ramps, Distance between supports 1,310 / 1,410 mm, Central grease lubrication system with electric pump, LED work lights, Floor: Pressed grating 30/30/5 mm (hot-dip galvanized) over the entire loading area in the low bed, ramps, and on the upper platform, Ramps: 2-part ramps in special design with mechanical extension, length approx. 2,850 + 1,850 mm, with a maximum slope of 8°. Ramp width approx. 800 mm, can be slid together in the middle to approx. 50 mm. Hydraulically adjustable laterally to an overall width of 2,750 mm. Load capacity 25 tons. Ramp operation via hydraulic pump unit. Power supply via NATO socket, Hydraulically liftable ramp on the gooseneck, approx. 3,450 mm long for accessing the upper bed over the entire vehicle width, with a load capacity of 10 tons, 4x PVC toolboxes 600/450/400 mm, Electric winch RUNVA 24 Volt, 8.0 tons pulling force, with steel cable 25m x 12 mm, with hook, incl. cable guide window and remote control, Total of 64 heavy-duty lashing rings (8 tons), Paint: RAL 2002 blood orange, Tires 235/75R17.5 13/13/13/13 mm 9/6/9/9 mm 10/10/10/10 mm, Upon request, leasing/financing options are available - quick processing, even without a down payment! More information and requirements on request. The vehicle description is for general identification of the vehicle only. The information, images and descriptions are without guarantee! Equipment must be checked separately if necessary. The seller assumes no liability for any typing and data transmission errors. Errors and prior sale are reserved. Thank you for your interest! We look forward to your visit. Our SERVICE: We will gladly accept your used vehicle in part exchange, Customs license plates for 30 days including insurance, EUR-1 + all customs documents for export, TÜV / SP / UVV / Tachograph inspection / OBU installation, Professional transport to the customer, Transfer from Stuttgart Airport / Sindelfingen train station to our location by arrangement, Retrofitting of additional attachments and other individual customer requirements possible by arrangement.

Condition: used, maximum load weight: 33,400 kg, overall weight: 46,000 kg, axle configuration: 3 axles, first registration: 09/1998, Year of construction: 1998, Equipment: ABS, * DOLL S3H Crodpfxozhy A Ss Aafsi * Extendable * Radio-controlled steering axle * Tires approximately 80% tread * Total weight 46,000 kg * Payload 33,400 kg * Year of manufacture 1998 * Good condition * Working hours: Mon-Fri 07:30-12:00, 13:00-18:00, Saturday 07:30-17:00. * E-mail: * Tel/WhatsApp/Viber: Alexandar Ilic * Tel/WhatsApp/Viber (English): Magdalena Ilic