Platform trailer

Broshuis TRIPPLE EXTENSION + 22,5 MTR | TOP CONTITION |...

Condition: used, Year of construction: 2007, Empty weight: 950 kg Carrying capacity: 2.550 kg GVW: 3.500 kg Credpfxoyzknne Aafei VAT/margin: VAT qualifying

Condition: excellent (used), first registration: 09/2015, loading space length: 20,180 mm, loading space width: 3,000 mm, color: other, Damages: none YAFTL2007F0017329 = More information = Year of construction: 2015 Empty weight: 13.600 kg Carrying capacity: 28.400 kg GVW: 42.000 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: DW205AH = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. Credpfx Ajymrb Sjafoi No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles Cjdpfev Sw E Asx Aafjri * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: new, empty load weight: 9,500 kg, maximum load weight: 35,500 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, suspension: air, tire size: 435/50 R 19.5, color: grey, operation weight: 9,500 kg, Equipment: ABS, Extendable platform: Platform with hardwood planks with a rear slope of approx. 1,000 mm x 8° 1 pair of permanently installed wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) Cutouts in the outer frame of the platform for attaching tension straps (LC 2,000 daN) Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer High-quality 2-component (2K) topcoat, single-color in Novagrau Rear section metallized and painted in RAL 9010 (pure white) Metallic paint is not possible Fifth wheel: JOST fifth wheel (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system in accordance with EU regulations, lighting 24 Volt Sockets 24N, 24S & 15-pole Axles and tires: BPW axles, air-sprung, with disc brakes (377 mm), with raising/lowering function The trailing lift axles with electro-magnetic reverse lock can be activated via reverse gear or manually Axle tool Tires 435/50 R 19.5 Included accessories: Yellow-red air couplings on the galvanized connecting strip at the front 4 pieces of chocks with holder 2" kingpin A galvanized steel front bulkhead approx. 1600 mm high. EN12642-XL White reflector tape according to EU regulations on the side, on the extension and red at the rear Platform with strong hardwood floor 9 pairs of socket pockets for plug-in profiles 100 x 50 mm in the outer frame of the platform 1 spare wheel holder under the platform on the right in the direction of travel Galvanized folding supports under the slope of the platform Adjustable mounting rails for ALU loading ramps at the rear of the vehicle European reflector signs (red-yellow) at the rear of the semi-trailer One mudflap at the rear of the semi-trailer One bracket for a rotating beacon at the rear of the semi-trailer On the gooseneck and on the rear plate, left and right, one bracket each for the warning signs including socket One tool box HDPE 620x360x610 under the platform on the left in the direction of travel 4 pairs of WADER container pockets in the platform, for 1x 20ft container or 1 x 40ft container, an additional locking point is provided in the extension for a 45ft container 3 pairs of socket pocket strips, mounted transversely in the platform, for plug-in profiles 100 x 50 mm Lift axle on the front axle with control via TEBS E depending on the current axle load and the current loading condition Speed stickers 80 km/h at the rear and on both sides Four warning signs approx. 423 x 423 mm that can be extended by approx. 400 mm with an LED position light. The warning signs have a bracket for a rotating beacon Load manometer for determining the axle loads including load diagram Codpfx Aaek Eammofjri HRM metallization (High Resistance Metallization) of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces are metallized

Condition: new, empty load weight: 9,300 kg, maximum load weight: 38,700 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,200 mm, suspension: air, tire size: 385/65 R 22,5, color: grey-black, Equipment: ABS, Loading platform: • Extendable loading platform with pneumatically operated locking mechanism • Loading platform with approximately 30 mm thick wooden floor • 7 pairs of lashing rings, foldable outwards (LC 5,000 daN) • 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) • Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) Axles and tires: • BPW axles and suspension, all axles with hydro-mechanical forced steering • With disc brakes • Technical axle load: 10,000 kg • Air suspension with lifting and lowering valve • Axle tool • Tires: 385/65 R 22.5 • TPMS tire pressure monitoring system according to ECE R 141 Braking system: • WABCO braking system according to EU regulations with EBS-E (2S2M) Electrical system: • Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets • Connection according to ISO • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Included accessories: • Trailing function at the front and rear, operable via cable remote control with push buttons, with single-axle steering control • 4 wheel chocks with holder on the front panel • 2" kingpin • One galvanized steel front panel, approx. 1,600 mm high Credpfx Aajiu Etrofei • Yellow-red air couplings on the galvanized connection bar at the front • White reflector tape according to EU regulations on the sides, on the extension, and at the rear of the trailer in red • European reflector plates (red-yellow) at the rear of the trailer • One mudflap at the rear of the trailer • Manual and description • One bracket for a rotating beacon at the rear of the trailer • Loading platform with approximately 30 mm thick wooden floor, framed in omega profiles • 10 pairs of socket pockets for 100 x 50 mm lashing bars in the outer frame of the loading platform • 1 spare wheel holder under the loading platform on the right side in the direction of travel • Electro-hydraulic unit • One bracket for warning signs on the gooseneck and the rear panel, left and right, including socket • A painted sand layer on the center beam as a non-slip coating • 6 pairs of WADER container pockets in the loading platform, for 1x20ft, 2x 20ft or 1x 40ft container, an additional locking point is provided on the extension for a 45ft container • 4 pairs of socket pocket strips, mounted transversely in the loading platform, for 100 x 50 mm lashing bars • Access ladder mounted on the right side in the direction of travel • One tool box, HDPE, approx. 1,200 x 500 x 480 mm, at the front under the loading platform on the left side in the direction of travel • Central lubrication system BEKAMAX (Pico) with removable protection around the pump • Lift axle on the front axle, controlled by TEBS E depending on the current axle load and the current load condition • Wireless remote control for the trailing function in addition to the cable remote control, with indicator lights on the receiver as single-axle steering control • Four warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light • A bracket for a rotating beacon on the warning signs • Speed stickers 80 km/h at the rear and on both sides • Load manometer to determine the axle loads, including load diagram • HRM metallization (High Resistance Metallization) of the outer frame • Complete steel construction blasted with shot, then the defined visible surfaces are hot-dip coated with metallization with ZINACOR 8

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2005, total width: 2,530 mm, suspension: air, Equipment: ABS, = Additional Options and Accessories = - Air suspension - Central lubrication system = Additional Information = General Information Crjdpsw S Dnhjfx Aafoi Year of manufacture: 2005 Axle Configuration Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 9,500 kg Payload: 32,500 kg GVW: 42,000 kg Functional Features Extendable body: Yes Financial Information Price: On request Further Information Please contact David F. Middelman for more information.

Condition: used, axle configuration: > 3 axles, first registration: 09/2010, loading space length: 9,030 mm, loading space width: 2,540 mm, loading space height: 820 mm, total length: 13,850 mm, total width: 2,540 mm, suspension: air, tire size: 205/65R17.5, wheelbase: 8,630 mm, color: red, Equipment: ABS, Nooteboom MCO-50-04V 4 x steering axles. BPW axles. Remote steering with cable. 95 cm coupling height. Total length extended: 26.53 m. Loading bed: 903 cm + 650 cm + 650 cm. Loading height (loaded) 82.5 cm. = Further Information = Axle configuration Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Steered; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Credpfxoyf A Srj Aafsi Rear axle 2: Dual tires; Steered; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Rear axle 3: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle 4: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Weights Unladen weight: 14,960 kg Payload: 33,440 kg GVWR: 48,400 kg Identification Model number: MCO-50-04V / 25MTR / 2X EXTENDABLE = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, axle configuration: 3 axles, first registration: 02/2001, total length: 13,350 mm, total width: 2,550 mm, suspension: air, tire size: 245/70R17.5, color: red, Total length: 1334 cm + 1950 cm. Loading bed length: 915 cm + 1950 cm. Loading height: 100 cm. = Further information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Steerable; Tire tread depth, left inner: 30%; Tire tread depth, left outer: 30%; Tire tread depth, right inner: 30%; Tire tread depth, right outer: 30% Rear axle 2: Twin tires; Steerable; Tire tread depth, left inner: 50%; Tire tread depth, left outer: 50%; Tire tread depth, right inner: 50%; Tire tread depth, right outer: 50% Rear axle 3: Twin tires; Steerable; Tire tread depth, left inner: 30%; Tire tread depth, left outer: 30%; Tire tread depth, right inner: 30%; Tire tread depth, right outer: 30% Weights Unladen weight: 15,650 kg Crjdpfx Asycf Htsafoi Payload: 29,350 kg GVW: 45,000 kg Identification Model number: 3 ABSD-48/3 / 3 x EXTENDABLE / 3 = Company information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, maximum load weight: 43,640 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 10/2013, Semi-trailer with air suspension and hydraulic dual-circuit forced steering (turntable steering) Loading platform from 15,475 mm up to 54,575 mm Loading Platform - "Flatbed" design, quadruple extendable, stepped gooseneck - Mechanical landing gear - Front corners at 90°, closed external frame - Integrated steering linkage in the front frame - Turntable-mounted fifth wheel plate with interchangeable 2" kingpin and adjustable steering wedge - Rear crossmember as sturdy underride protection Credpfx Aasyltm Hofei Chassis - 4-axle chassis with air suspension including lifting and lowering valve - BPW axles with adjustable tapered roller bearings Braking System - Dual-line, full-air, all-wheel brake system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABV (ABS) Loading Platform L x W 15,475 mm x 2,520 mm Extendable: 9,800 mm + 9,700 mm + 9,800 mm + 9,800 mm, total length up to 54,575 mm Loaded loading height: 1,305 mm At a loaded saddle height: 1,300 mm Rear steering radius: 2,350 mm Gooseneck: 25,000 kg Axle loads: 4 x 10,000 kg Steering 1st – 4th axle hydromechanically forced-steered (dual-circuit steering) (turntable steering) Electric power pack with radio remote control

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, loading space length: 15,570 mm, loading space width: 2,520 mm, loading space height: 1,670 mm, total length: 15,570 mm, total width: 2,520 mm, total height: 1,670 mm, suspension: hydraulics, tire size: 295/80 R22.5, wheelbase: 1,650 mm, color: red, Year of construction: 2009, Colour: Red Payload weight: 85,240 kg Main Features Manufacturer: Nooteboom Type: 0VB-102-06 Ballast Trailer Chassis number: XMR0VB00090001126 Year: 2009 Cedpouu Hgwofx Aaferi Weights/Loading Capacity Axle load: 12,000 kg per axle Total axle load: 12,000 kg x 6 = 72,000 kg Gooseneck load: 30,000 kg GVW: 102,000 kg Empty weight: 16,760 kg Loading capacity: 85,240 kg Axles Axle brand: SAF Hydraulic suspension 1st axle: Friction steering + liftable 2nd axle: Rigid Axles 3 to 6: Hydraulic steering Tyres: 295/80R22.5, double fitted Dimensions Total length: 15,570 mm Loading floor width: 2,520 mm Height (empty): 1,670 mm Height (loaded): 1,605 mm King-pin height: 1,345 mm Radius to rear: 2,750 mm Radius to front: 1,560 mm Additional Information NATO plug Hydraulic landing gear Hand-controlled steering Spare tyre Lashing rings Stake pockets Rear bumper with lights King-pin: 3.5 inches Stairs on frame Central lubrication = Further Information = General Information Year of manufacture: 2009 Axle Configuration Tyre size: 295/80 R22.5 Axle brand: SAF Suspension: Hydraulic suspension Rear axle 1: Double tyres; Lift axle; Max. axle load: 12,000 kg; Steerable Rear axle 2: Double tyres; Lift axle; Max. axle load: 12,000 kg Rear axle 3: Double tyres; Max. axle load: 12,000 kg; Steerable Rear axle 4: Double tyres; Max. axle load: 12,000 kg; Steerable Rear axle 5: Double tyres; Max. axle load: 12,000 kg; Steerable Rear axle 6: Double tyres; Max. axle load: 12,000 kg; Steerable Weights Empty weight: 16,960 kg Payload: 85,040 kg GVW: 102,000 kg Functional Height of loading platform: 167 cm Condition Technical condition: very good Optical condition: very good Damage: none Financial Information Price: On request