Low loader

C.C.D. SS480 Low bed / 3 Axle / expandable

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Bodpohlz R Ssfx Ai Eslh Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: new, functionality: fully functional, BERTOJA SEMITRAILER 13.80m NEW, READY FOR REGISTRATION Double galvanized hydraulic ramp Edge rail on neck Winch preparation Self-steering axle CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30 AM - 7:00 PM / SATURDAY 8:30 AM - 2:00 PM WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semitrailer-Refrigerated Semitrailer Tipper – Lamberet - Schmitz Isuzu-Fixed body-Crane-Tipper- 4 axles -4 Rear Axles -Tway-T-Way-540- 460 hp - Xway-X-Way-Trilateral - V8 - Scania - Frost Edition Curtain Sider-Box body-Liftgate - Refrigerated Cell- Insulated with Fridge - Van Domenico Truck srl declines any responsibility for any discrepancies in technical specifications, options, and features, which may in some cases differ from those described. We invite you to verify the specifications of the specific vehicle. Bledpfx Aoxpi A Roi Eeh

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, first registration: 03/2015, loading space length: 134,450 mm, loading space width: 2,550 mm, loading space height: 480 mm, suspension: hydraulics, Year of construction: 2015, Equipment: ABS, = Additional options and equipment = - Central lubrication = Further information = Axle configuration Suspension: hydraulic suspension Rear axle 1: Max. axle load: 12,000 kg; Steered Rear axle 2: Max. axle load: 12,000 kg; Steered Weights Unladen weight: 12,660 kg Payload: 34,340 kg Gross vehicle weight: 47,000 kg Functional Loading platform height: 48 cm Extendable body: Yes Condition Bsdovtc Aijpfx Ai Eslh Technical condition: very good Visual condition: very good Financial information Price: On request Further information Contact David F Middelman for more information.

Condition: good (used), mileage: 109,000 km, power: 405 kW (550.65 HP), first registration: 12/2016, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 6,000 mm, Year of construction: 2016, operating hours: 7,962 h, Equipment: trailer coupling, = Additional Options and Accessories = - Aluminium fuel tank - Brake booster - Low noise - Refrigerator - Air suspension - Reversing camera - Sun visor - Xenon lighting - Tow hitch = Further Information = Axle Configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Lift axle Weights Unladen weight: 25,715 kg Payload: 13,285 kg Gross vehicle weight: 39,000 kg Functionality Body brand: EFFER 955/8S + JIB 6S CE marking: yes Blsdsy Amzyepfx Ai Esh Condition Technical condition: good Visual condition: good Financial Information Price: On request

Condition: new, overall weight: 58,000 kg, Year of construction: 2026, Low loader semitrailer MAX100 4 A 8.60 U Technical data Speed 80 km/h Total weight 60,800 kg Fifth wheel load 18,000 kg Axle load 42,800 kg Empty weight Payload Gooseneck length 3,850 mm Fifth wheel height loaded 1,250 mm Loading area length 8,600 mm Extendable by 5,400 mm Axle spacing 1,360 mm Rear steering radius 2,300 mm Loading height with max. load 860 mm Total width 2,540 mm Suspension travel -55/+145 mm Technical description Gooseneck With bevelled corners at the front 45° and with rear bevel of approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring 30 mm thick Loading area in extendable version with rear slope of approx. 1,000 mm x 8° 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) 1 pair of lashing rings lying in the front of the loading area (LC 10,000) Hardwood flooring approx. 48 mm thick, checkered plate above the axles Ramps Two-part steel ramps A pair of galvanized two-part steel ramps approx. 2750 +1400 mm x 800 mm with approx. 48 mm thick hardwood flooring Ramp with hydraulically foldable and retractable ramp parts, hydraulic lifting mechanism and hydraulically movable. Maximum load per pair 40,000 kg Bedpfsg Sk T Dex Ai Eelh Tires 235/75 R 17.5 Brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc dust primer a high-quality 2-component (2K) top coat in a single color in RAL colors of your choice Rear section metallized and painted in RAL 9010 (pure white). Seat supports: JOST seat supports (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Steel construction made of high-strength fine grain steels. Steel qualities: Steel construction made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system in accordance with EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection panel at the front with sockets 24N, 24S & 15-pin. Connection in accordance with ISO. 24N IS0-1185 24S IS0-3731 15-pin IS0-12098 Accessories included: A galvanized steel front wall approx. 400 mm high. 2" kingpin 4 pieces of brake shoes with holder on the bulkhead. A holder for a rotating beacon at the rear of the trailer. SAF axles, two axles rigid, one axle with self-steering, air-sprung, with drum brake, with lifting/lowering function. The self-steering axle with electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. Holder in the rear area of the gooseneck for aluminum loading ramps. Galvanized folding supports under the slope of the loading area. Mechanical locking of the loading area. A spare wheel with holder in front of the bulkhead. Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer. Yellow-red air couplings on the galvanized connection strip at the front. On the gooseneck and on the rear panel on the left and right there is a holder for the warning signs including a socket. A mud flap at the rear of the trailer. Manual and description On the gooseneck, plug-in aluminum side walls and rear wall approx. 2,440 x 400 mm (LX H). The rear galvanized plug-in stanchions are removable. Length of the body approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container

Condition: used, mileage: 362,000 km, power: 375 kW (509.86 HP), first registration: 07/2015, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 4,100 mm, fuel: diesel, brakes: engine braking, color: orange, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, traction control, = Other Options and Accessories = - Remote-controlled central locking - Leather interior - Hub reduction - Radio Bedpfey A I Axjx Ai Ejlh - Sun visor - Toolbox = Notes = Mercedes-Benz Arocs 3251 8x4/4 drive 410 cm wheelbase Full leaf suspension Palfinger PK 65002-SH E 6x hydraulic extension Fly jib PJ 125 C 4x hydraulic extension 2x manual extension Adjustable fifth wheel 24V NATO connector = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Leaf suspension Front axle 1: Tire size: 385/65R22.5; Steered; Left tire tread: 80%; Right tire tread: 80% Front axle 2: Tire size: 385/65R22.5; Steered; Left tire tread: 80%; Right tire tread: 80% Rear axle 1: Tire size: 315/80R22.5; Twin tires; Left inner tread: 40%; Left outer tread: 40%; Right inner tread: 40%; Right outer tread: 40% Rear axle 2: Tire size: 315/80R22.5; Twin tires; Left inner tread: 40%; Left outer tread: 40%; Right inner tread: 40%; Right outer tread: 40% Weights Unladen weight: 23,407 kg Payload: 8,593 kg GVW: 32,000 kg Functional Crane: Palfinger Interior Upholstery: Leather Financial Information Price: Upon request Identification Type Number: Arocs 3251 8X4 / PALFINGER PK 65 = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po-russki. We strive to provide accurate information, however, no rights can be derived from the content of these texts.

Condition: excellent (used), first registration: 05/2013, total length: 123,500 mm, total width: 2,550 mm, total height: 900 mm, color: blue, Year of construction: 2013, Unladen weight: 9,100 kg Payload: 48,900 kg Gross vehicle weight (GVW): 58,000 kg Technical condition: very good Visual condition: very good Bledpfx Aieyuphfj Esh 4 air-suspended axles 2 steered axles, 1 lift axle 10,000 kg per axle Technically permissible total weight: 58,000 kg Tyre size: 245/70 R17.5 Loading platform length: 855 cm + 335 cm gooseneck Loading platform width: 255 cm Loading platform height: 90 cm Lashing rings and round tie-down points

Condition: excellent (used), mileage: 153,000 km, power: 412 kW (560.16 HP), first registration: 08/2013, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2013, Equipment: ABS, AdBlue, air conditioning, crane, cruise control, differential lock, electric window regulation, fog lights, parking heater, power mirror, retarder, soot filter, = Additional Options and Accessories = - Aluminum fuel tank - High beam headlights - Speed limiter - Refrigerator - Air suspension - Particulate filter - Sun visor - Auxiliary heater (parking heater) - Toolbox - Power take-off (PTO) - Central lubrication system = Further Information = Blodpfxjyiun Hs Ai Ejh Axle configuration Brakes: Disc brakes Front axle 1: Tire size: 385/65/22.5; Steered; Suspension: leaf suspension Front axle 2: Tire size: 385/65/22.5; Steered Rear axle 1: Tire size: 295/80/22.5; Twin tires; Differential lock; Suspension: air suspension Rear axle 2: Tire size: 275/70/22.5; Twin tires; Lift axle; Suspension: air suspension Functional Boom: Telescopic (8 sections) Boom length: 21 m Lifting capacity: 12,000 kg Lifting height: 2,300 cm Crane: HIAB 477-8, year of manufacture 2013, mounted behind the cab Superstructure brand: HIAB 477-8 CE marking: yes Condition Technical condition: very good Optical condition: very good SCANIA R560 V8 8X2 TRACTOR UNIT COMBI + HIAB 477 E-8 CRANE EURO 5 L PACKAGE 560 HP DRIVELINE 8X2 REAR LIFT AXLE WHEELBASE 450 CM AIR SUSPENDED CR19H SLEEPER CAB WITH AIR CONDITIONING, PARKING HEATER, AND REFRIGERATOR AUTOMATIC TRANSMISSION TOOLBOX ADJUSTABLE FIFTH WHEEL TOOLBOXES PREPARED FOR BALLAST FLATBED HYDRAULICS FOR TRAILER HIAB 477 E-8 HIPRO CRANE 8X HYDRAULIC EXTENSIONS OIL COOLER FOR CRANE HYDRAULICS LARGE HYDRAULIC WINCH WITH HOOK AND ROLLERS 4X OUTRIGGER SUPPORTS RADIO REMOTE CONTROL MAX LIFTING CAPACITY 12,000 KG MAX LIFTING CAPACITY AT 2080 cm: 1,380 KG WORKING HEIGHT 23.5 METERS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: used, color: blue, Year of construction: 2018, Broshuis 2 ABD-38 SL/1. Year: 2018. 12-ton Broshuis SL axles. Unladen weight: 13,550 kg. Payload capacity: 32,950 kg. Gross weight: 46,500 kg. Kingpin load: 22,500 kg. Hydraulic detachable gooseneck. Alloy side boards and toolbox on the neck. Extendable by 5.65 meters. 2 x 25 cm extension included (total widening). Hydraulic suspension. Power steering. Radio remote control. Zinc-coated. Dimensions: Neck: Bedpfx Aoy A Ehxji Eslh Length: 3,720 mm Width: 2,500 mm Height: 1,520 mm Kingpin height: 1,250 mm Deck: Length: 6,620 mm Width: 2,530 mm Height: 350 mm Deck thickness: 200 mm Rear trailer section: Length: 2,830 mm Width: 2,530 mm Height: 920 mm Tyres: 245/70R17.5, 80% tread remaining. German trailer! ID No: 581. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations from Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further information = Year of manufacture: 2018 Unladen weight: 13,559 kg Payload: 32,950 kg Gross vehicle weight: 46,500 kg Extendable body: Yes Price: On request = Company information = For more information: WhatsApp:

Condition: used, axle configuration: 3 axles, first registration: 07/2024, total length: 13,610 mm, total width: 2,550 mm, suspension: air, tire size: 245/70R22.5, wheelbase: 9,460 mm, color: blue, Year of construction: 2024, Dutch registration SAF axles Friction self-tracking Reverse with remote control Wideners Wide marker boards Stainless steel toolboxes Toolbox on the gooseneck Spare wheel = Further information = Axle configuration Tire size: 245/70R22.5 Brakes: Drum brakes Suspension: Air suspension Front axle: Dual tires; tire tread depth left inside: 50%; tire tread depth left outside: 50%; tire tread depth right inside: 50%; tire tread depth right outside: 50% Center axle: Dual tires; tire tread depth left inside: 50%; tire tread depth left outside: 50%; tire tread depth right inside: 50%; tire tread depth right outside: 50% Rear axle: Dual tires; Steerable; tire tread depth left inside: 50%; tire tread depth left outside: 50%; tire tread depth right inside: 50%; tire tread depth right outside: 50% Weights Unladen weight: 9,580 kg Payload: 41,420 kg GVW: 51,000 kg Identification Bsdsy Sm Thspfx Ai Eelh Type number: 3ASD-3A / 1X LIFT-AXLE / ELECTRI = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We strive to provide accurate information, but no rights can be derived from the published texts.