Low loader semitrailer

GVN Trailer 2 Axle Hydraulic Platform Lowloader

Condition: excellent (used), functionality: fully functional, mileage: 137,500 km, power: 154.45 kW (209.99 HP), number of beds: 2, number of seats: 3, fuel type: diesel, gearing type: mechanical, color: original, first registration: 04/1995, chassis manufacturer: IVECO, chassis model: EUROCARGO, total length: 7,300 mm, total width: 2,500 mm, total height: 3,650 mm, axle configuration: 4x4, fuel tank capacity: 200 l, overall weight: 10,500 kg, empty load weight: 7,500 kg, steering wheel position: left, tire size: 365/80 R20, Year of construction: 2019, Equipment: additional headlights, air conditioning, all wheel drive, all-season tires, awning, bathroom, bunk beds, car registration, differential lock, fog lights, full service history, navigation system, non-smoking vehicle, onboard kitchen, parking heater, parking sensors, power assisted steering, shower, single beds, solar array, trailer coupling, twin bed, Custom-built and fully equipped expedition truck. Nljdpfx Aex N E T Isiaoh

Condition: good (used), functionality: fully functional, empty load weight: 11,800 kg, maximum load weight: 25,500 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 10/1998, loading space length: 13,300 mm, loading space width: 2,550 mm, loading space height: 450 mm, suspension: air, tire size: 245.70 R 17.5, color: red, Year of construction: 1998, Equipment: ABS, sem bertoja extendable cradle, 3 axles with 2nd and 3rd steering, air suspension, abs, year 1998, 5.30m cradle with additional 3.50m extension, height from ground 45cm, extractable module above the axles, adjustable detachable neck, control wire for steering self-steering axles, good condition, INTERDRIVE SRL-PARMA DEALER Njdpfxowg E Rbj Aiaslh

Condition: used, mileage: 149,000 km, power: 353 kW (479.95 HP), first registration: 09/2008, fuel type: diesel, overall weight: 40,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: crane, soot filter, Crane: Nedpszbpyuefx Aiaslh ----- Climate control - Retarder - Lifting and steering axle - Fassi 660 5+6 - 5-point outrigger system (front outrigger) - Grapple line - Trailer coupling - Tipper bridge Suspension: Leaf spring - Air suspension

Condition: new, empty load weight: 5,500 kg, overall weight: 19,500 kg, axle configuration: 1 axle, loading space length: 11,800 mm, loading space width: 2,550 mm, loading space height: 1,100 mm, suspension: air, tire size: 215 75 17,5, Equipment: crane, 1x SAF or BPW axle Total weight: 19,500 kg Payload: 14,000 kg Empty weight: 5,500 kg Total length: 12,800mm + 1500mm Brake system: Wabco 2S-2M Electrical system: Aspöck Systems Air suspension Hydraulic rear extension in full width 2550mm and length 1500mm Semi-trailer completely galvanized / galvanized (100% galvanized / 100% galvanized) Tire size: 215/70 R 17.5 Tire brands: Pirelli, Goodyear, Fulda, Continental. Nedpokqmuujfx Aiaolh 5th Wheel Height: approx. 1050mm - 1150mm (other saddle heights also possible) Hydraulic winch 8ton with remote control with pulleys 24v 4.5KW electro-hydraulic motor Steel ramp: 2 pieces Changes possible according to customer requirements Painting freely selectable / free of charge All documents COC, Tüv, etc. available for approval.

Condition: good (used), mileage: 128,232 km, Year of construction: 2014, operating hours: 14,003 h, Manufacturer: Terex Demag Type: AC 40-1 City Year: 2014 Capacity: 40 t Main Boom: 31.2 m Kilometers: 128,232 km Nedpfxoyr Iz So Aiaolh Crane operating hours: 14,003 h Optional jib: 13 m Runner (assembly jib): 1.2 m

Condition: new, empty load weight: 11,000 kg, overall weight: 68,000 kg, axle configuration: > 3 axles, suspension: air, Year of construction: 2025, Equipment: ABS, GVN Trailer 4 Axle Standart Lowbed        Please get contact with us for more informaiton;    Njdpjqxbapjfx Aiaolh

Condition: new, maximum load weight: 44,000 kg, overall weight: 61,000 kg, axle configuration: 3 axles, Year of construction: 2026, Further information here: Nljdpfov D Abtjx Aiash

Condition: new, empty load weight: 10,700 kg, maximum load weight: 38,800 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17,5, color: grey-black, Equipment: ABS, Gooseneck: •Gooseneck with angled front corners at 45° and rear taper of approximately 750 mm x 10° •3 pairs of lashing rings •Hardwood decking, 30 mm thick Extendable platform: •Extendable platform with rear taper of approximately 1,000 mm x 8° •Cutouts in the outer frame of the platform for attaching lashing straps •Hardwood decking approximately 48 mm thick, with chequered plate decking over the axles Two-piece steel ramps: •One pair of galvanized, two-piece steel ramps with approximately 48 mm thick hardwood decking •Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable •Maximum load per pair: approximately 40,000 kg Axles and tires: Nlsdjhlz S Nopfx Aiash •BPW axles and suspension, 2 fixed axles, 1 steered axle •Technical axle load: 12,000 kg •Electro-magnetic reversing lock activated via reverse gear and manually •Air suspension with lifting and lowering valve •Axle tool •235/75 R 17.5 3PMSF Braking system: •WABCO braking system according to EU regulations with EBS-E Paint finish: •First-class and durable corrosion protection of the standard bead-blasted welded frame is guaranteed by a 2-component zinc dust primer •High-quality 2-component topcoat, single-color in MB 7350 Novagrau •Rear section metallized and painted in RAL 9010 Kingpin: •JOST kingpin with 2-speed gearbox for 24t lifting capacity (50t test load). Steel structure: •Steel structure made of high-strength fine-grain steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical system: •Electrical system according to EU regulations, lighting 24 volts •ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S and 15-pole sockets Included accessories: •One spare wheel with holder •One galvanized steel front bulkhead, approximately 400 mm high •Yellow-red air couplings on the galvanized connection strip at the front •4 chocks •One holder for a rotating beacon at the rear of the semi-trailer •Mounting in the rear area of the gooseneck for aluminum support ramps •Galvanized folding supports under the taper of the platform •Cover plates to bridge the gap between ramps and platform •White reflector tape according to EU regulations on the side, on the extension and at the rear in red •Electro-hydraulic unit at the rear, under the platform •On the gooseneck and on the ramps, one holder each on the left and right for warning signs including socket •Control valves for the ramps mounted on the right side of the semi-trailer •Aluminum side and rear walls on the gooseneck, approximately 2,440 x 400 mm •The rear, galvanized stake pockets are removable (length of the superstructure approximately 2,560 mm) •Four warning signs that extend by approximately 400 mm with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the platform •Extensions, galvanized, extendable by approximately 230 mm on each side •Square ladder rails 20 x 20 mm every 200 mm on the outer frame of the platform taper •A lacquered sand layer as an anti-slip coating on the chequered plates, over the kingpin and the platform •Load manometer for determining axle loads, including load diagram •HRM metallization (High Resistance Metallization) of the outer frame •Complete steel structure bead-blasted, then the defined visible surfaces hot-dip metallized with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: used, mileage: 500 km, power: 324 kW (440.52 HP), first registration: 01/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, total width: 2,550 mm, total height: 3,650 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Chassis MAN TGS 26.440 6x2-4 BL CH EURO6e Engine: MAN D2676 LFAZ, 324 kW, 2,250 Nm torque Transmission: MAN TipMatic 12.26 DD Wheelbase: 3,900mm; 1,350 mm between rear axle and trailing axle MAN Efficient Roll Trailing axle, non-driven, straight, steered, liftable Differential lock on driven rear axle Leaf/air suspension NN cab, basic cab suspension with mechanical roof hatch Nedpjymudcsfx Aiaslh H7 front headlights LED daytime running lights Fog lamps, H7 cornering lights High beam assistant, automatic driving light control 2x LED beacons MAN OptiView mirror package, digital mirror replacement system Driver comfort seat, air-sprung with seat heating Passenger seat unsprung Multifunction steering wheel 12.3-inch instrument cluster Climatronic air conditioning Auxiliary heater ACC Stop & Go cruise control MAN Professional Media System navigation 12.3-inch MAN sound system Trailer coupling (to be installed) FFG elephant vacu 13.002 VSK suction vehicle Tank Material thickness: 6 mm Total capacity: 13,000 l Sludge chamber approx. 11,500 l - Water chamber approx. 1,500 l Tank emptying Free outflow from the rear-tilted body Via hydraulic rear tilting, total tilt angle approx. 20 - 25° Via hand valve and multi-stage hydraulic cylinder With pressurization by vacuum pump Suction-pressure pipes laid over tilting rotation point Water chamber * Filling Filling line system in DN 50 with ball shut-off valve Coupling connection - Storz C Free-run device according to drinking water regulations Overflow from hydrant filling led under the vehicle Pneumatic shut-off flap to prevent splashing during driving * Emptying Cleaning/emptying connection DN 50 with shutoff fitting and Storz C coupling Emptying flap Top-hinged, externally reinforced full door, opening over entire tank cross-section at rear Hydraulically opens upward, with hydraulic locking Manual control valve for opening/closing within view Suction and emptying nozzles Located in upper and lower part of emptying flap, each DN 100 with manual ball valve Sampling tap Perrot coupling V-piece with dust cap Sludge chamber fill control Float indicator with additional rotary sensor for electronic measurement Float located in center of tank for more accurate measurement when vehicle is tilted Digital display at operator station in 100-liter increments Vacuum pump Make: Gardner Denver Wittig RFW 200 Suction capacity: max 1,250 m³/h (free flow) Drive power: approx. 45 kW Pipework DN 100 Vacuum pump drive via PTO with cardan shafts and V-belt drive Suction hose reel Installed on tank lid, hydraulically driven with rotary union Shut-off gate and rotary union in DN 100 Designed for 50 meters suction hose DN 80 High-pressure pump Make: Speck Type P 45 - 75/180 G Pump capacity approx. 75 l/min at 180 bar (nozzle pressure approx. 150 bar) Drive power approx. 28 kW Piping DN 13 including fittings High-pressure hose reel Fixed at rear, hydraulically operated 80 m DN 13 Spray gun lance 500 mm Operator station integrated in equipment box Radio remote control (compact version) Equipment boxes Hose trough Rear vehicle camera Hand wash station with heating 5x LED work lights 1 flashing beacon mounted at rear We, the Lower Saxony Commercial Vehicle ...

Condition: used, empty load weight: 11,300 kg, maximum load weight: 29,700 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 07/2006, suspension: air, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * Special low loader for transporting commercial vehicles and construction machinery * Manufactured by the premium manufacturer Estepe from the Netherlands (Estepe type E0PL 24-41) * Years of experience in building such special low loaders for transporting trucks and construction machinery have meant that every detail has been taken into account * Of course with extendable low bed, hydraulic ramps and hydraulic platform * Special winch with remote control, etc. * BPW axles * 3rd axle - lift axle * Air suspension with lifting/lowering * Central lubrication * GVW: 41,000 kg. * Empty weight: 11,300 kg * Payload: 29,700 kg Nledpfx Aijrtbb Ssaoh If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .