Heavy-duty truck

VOLVO SZM FH 500 mit Hydrl. Pumpe 6x4

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side Ksdshlz R Sjpfx Ag Ujdl -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: new, functionality: fully functional, machine/vehicle number: XPNK0C200PD101865, first registration: 08/2024, next inspection (TÜV): 08/2026, loading space volume: 77 m³, Year of construction: 2024, Technical data: - Saddle height: 1,250 mm / 1,350 mm - Outer length: 12,095 mm - Volume: 77 m³* - Outer width: 2,550 mm - External height: 3,950 mm - Front overhang: 1,495 mm - Support leg spacing: 2,350 mm - Wheelbase: 6,875 mm - Rear overhang: 3,725 mm - Number of axles: 3 - Tire size (standard): 445/65 R 22.5 - Maximum permissible axle load: 10,000 kg - 1st axle: Lift axle - 3rd axle: self-steering axle - Brakes: Drum brakes *Volume depends on the selected options Basic equipment: General Kjdpfx Agoun Iuij Usdl - Aluminum vehicle frame for low unladen weight and high payload - Aluminum support leg construction with aluminum drop support legs - All aluminum cross members in heavy-duty design; the short cross members on the axles are the axles are inserted with steel U-profiles - Aluminum side walls consisting of a 3 mm inner side and a 2 mm outer side - The side walls are continuously welded on the inside over the entire height (for maximum strength and minimum soiling) - Hydraulic tailgate with 115 degree opening angle, integrated lighting and Grain pusher and 115 degree opening angle - Operation via radio remote control - Body sanded, primed and painted in 2K paint - Two-year guarantee on paint and construction Attachment - The fifth wheel plate is built with a robust steel box construction for a maximum fifth wheel pressure of of 18,000 kg (12,000 kg approved / 18,000 kg technical) Loading space - Corrugated aluminum floor boards, 6 mm, 21 boards with aluminum and plastic end caps Wear strips Hydraulic floor drive with 3 cylinders that move 7 floor strips each; Equipped with pressure gauge and temperature protection - Automatically retracting moving partition wall, hydraulically operated by means of radio remote control Price on request Subject to prior sale and errors excepted Locations may vary Internal: S51573

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured in self-supporting ALU (aluminum) construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc Brake 22.5": Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake lining wear indicator (BVA) for display in the tractor unit (without tractor head equipment), 1st and 3rd axle separately liftable with drive-off aid (without tractor head equipment), 3rd axle additionally with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Kdodpfofakkcox Ag Ujl Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, brand as per manufacturer’s choice, Alcoa aluminum rims DuraBright 11.75x22.5 ET 120, king pin bolted into a 10 mm thick plate Landing Legs: Aluminum drop landing legs, 2 x 10 tons support load, pivot feet used for air suspension Brake System: According to E.G. standard, dual-circuit brake system, EBS E-system Wabco with RSS system (Roll Stability Support), spring-actuated parking brake active on two axles, operated at the rear, aluminum air reservoir system, premium modulator Electrical System: According to STVZO guidelines, with 2 LED five-chamber taillights type Aspöck Europoint LED integrated in ALU rear end, 24 V system with 1x 5-pin & 2x 7-pin sockets, with LED side marker lights, 2 separate LED work lights at the rear, 2 LED work lights at 1st landing leg height, 1 inside left front LED work light, operable from outside Body/Bodywork "Fully Welded Inside Construction": Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn aluminum body, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide, fully welded with lower and upper flange, inside fully welded plank profiles, floor as moving floor system on 140 mm ALU crossbeams, floor load approx. 7 t/m2, crossbeams closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile 2-3 mm thick in straight design, special angled ALU corner profiles, smooth flat rear wall with 2 ALU swing doors 50/30 mm thick, 4 locking rods with welded-in ALU rear frame mounted in Teflon and stainless steel bearings, continuous ALU wall suspended from reinforced ALU top rail with "Kevlar tarpaulin" for complete emptying, lateral brush seals and additional Kevlar side tarpaulin, integrated discharge funnel with hinged floor closure flap, operable from outside left rear, inspection window rear left, 1 sample slide per rear door (2 pcs.), service door front left Hydraulic System: "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles on ALU square profiles with approx. 670 PE-HD sliding blocks, approx. 6 mm floor thickness, hydraulic stroke approx. 200 mm, fixed end at front wall, separate hydraulic line connection under the vehicle with fixed halves, line size NW 21, fixed halves with yet to be specified size and design, operating pressure 190 max. 240 bar, aluminum end pieces welded into the floor, electric operation rear left with cable remote in lockable waterproof box Accessories: PVC mudguards with rubber splash guards, ALU spare wheel holder, foldable side ALU underrun protection, 1 toolbox approx. 800x460x430 mm plastic, approx. 3.7 m ALU ladder, roll tarp 680 gr./m2 quality with rolling tarp system incl. side ...

Condition: used, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 04/2000, next inspection (TÜV): 10/2026, Year of construction: 2000, Without MAN tractor unit Kdjdpfx Ageyhrqco Uel

Condition: used, maximum load weight: 36,540 kg, overall weight: 48,500 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 05/2028, Year of construction: 2020, Equipment: ABS, Internal vehicle no.: G400133 On the way to our yard in Kaufungen – Kassel, Germany, available immediately. More INFO from Luis Lucena Low loader LANGENDORF SATÜ 30 – 10.0 m with wheel recesses Year of manufacture: 2020 Radio remote control 3 axles – 2 steered – 1 liftable Length: 13,900 mm Loading platform: 10,000 mm Technical permissible total weight: 48,500 kg Unladen weight: 11,960 kg Financing example: Kjdpfx Aey A Uxaeg Usdl * Internal no.: G400133 * Purchase price: €69,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €1,050.02 * Residual value: €13,380.00 If you are interested in this offer or wish to customize it to your needs, please contact Mr. Enchev. We look forward to your call. Errors and omissions excepted. We are happy to accept your used vehicle in part exchange. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----

Condition: new, maximum load weight: 25,645 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of immediately and soon-to-be available vehicles on our website. Excerpt from equipment specification. Complete specification available on request. Load area: - Low-bed design with central beam, extendable version, approx. 6,750 mm in length - 5 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Hydraulic lifting/lowering gooseneck, detachable Rear chassis: - Short rear chassis with closed outer frame and checker plate covering - Chassis with excavator trough, closed in the rear half for housing the air tanks - 2 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Air suspension with raise/lower control valve Tyres: - Tyres 245/70 R 17.5, 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Brake system: - Wabco braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) top coat in RAL 3000 Flame Red Including the following additional equipment: - 2 kingpins - Galvanised steel front wall, approx. 400 mm high - Remote steering from front and rear, operated by cable remote control with push buttons, including single tracking control for the axles (no installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including load diagram - On the gooseneck, removable aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). Rear galvanised stake pockets are removable. (Body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switch on the trailer, mounted on the left and right of the gooseneck platform - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stake pockets for insertable posts approx. 100 x 50 mm in the outer frame of the load area, 2 pairs in the chassis outer frame - Galvanised, extendable width extensions approx. 230 mm per side - Hydraulic connections from gooseneck to low bed with multi-coupling (instead of screw couplings). No seal guarantee included. Kjdexf Silspfx Ag Usdl - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard NLGI-2 grease, with removable protection around the pump - 2 pairs of WADER container locks on the loading area, for 1x20' container - 1 removable galvanised intermediate table with 1 pair of WADER container locks - 1 pair of steel ramps for bridging the low bed’s hook mountings - Anti-slip sand-coated layer painted on the load area - HRM Metallisation (High Resistance Metallisation)

Condition: new, maximum load weight: 37,820 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Ksdpow Tpqwjfx Ag Ujdl Gooseneck: - Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor covering approx. 30 mm thick Loading area: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing slats approx. 15 x 15 mm and widenings in the lower section - Between the 1st and 2nd axles, a pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load approx. 5 t/each - Recess in the chamfer and extending into the loading area for receiving the excavator bucket arm (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of lashing rings, horizontal, at the front of the loading area (LC 10,000 daN) - 5 pairs of flip-out lashing rings (LC 5,000 daN) - 3 pairs of flip-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) One-piece Steel Ramps: - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting mechanism, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length in the driving position Landing gears: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 fixed axles, 1 trailing steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool kit Tyres: - Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice - TPMS tyre pressure monitoring system in accordance with ECE R 141. The data transmission to the truck is via standardized EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display this data Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: - Steel structure made of high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations - Lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot-blasted with blasting wheel machine after welding - Second shot-blasting using corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure maximum corrosion protection - Final painting with 2 coats of two-component topcoat, single color in RAL 3002 Carmine Red, according to the RAL system 841GL - Rims in silver - Rear section metallized and in RAL 9010 (continuation see ori

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength? Aggregate chassis made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering? Wabco Smartboard? electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment)? 1st + 3rd axle separately liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and wheels 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel + approx. 120 kg) Seatposts Aluminum drop supports, Made of aluminum alloy, 2 - 10 tonne support load, we use swivel feet for air suspension Brake system Kjdpfx Ajgcw Rijg Usdl according to E.E.G. standard, dual-line braking system, EBS E - system Wabco with RSS system (roll stability support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical system according to the STVZO guidelines with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear end, 24 volt system with lx 15-pin and 2x 7-pin socket, with side contour lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the seat supports, 1 LED work light inside at the front left can be operated from the outside Structure/trough "structure fully welded inside" Front wall load 17,250 dkn? Rear and side walls 10,250/13,400 dkn aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside ! ! , floor as moving floor system laid on 140 mm aluminum cross beams, floor stacker load approx. 7 ton/m2 cross beams mounted accordingly closely (approx. 350mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design smooth rear wall in straight design with 2 aluminum wing doors 50/30mm thick with 4 rotating rod locks in the welded aluminum rear frame fixed in Teflon bearing and stainless steel bearing. ,running aluminum wall suspended in the reinforced aluminum top belt with "Kevlar tarpaulin" for complete emptying, side brush seal and additional Kevlar tarpaulin on the side, integrated discharge funnel with folding cover plate in the floor closure, operable from the outside on the left at the back, viewing window on the left at the back, 1 test slider in each of the rear doors, so 2 pieces, service door on the left in the front wall Hydraulic system "Cargo Floor" 24 board system - smooth design! Push floor system in the floor with hydraulically moved aluminum profiles mounted on aluminum square profiles with approx. 880 PE-HD sliders, approx. 8mm floor thickness, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, power supply at the rear left with cable operation in a lockable waterproof box, without hydraulic hoses Accessories PVC mudguard with rubber mud flaps, aluminum spare wheel holder, side

Condition: used, maximum load weight: 28,200 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2011, next inspection (TÜV): 03/2027, loading space length: 13,450 mm, loading space width: 2,470 mm, loading space height: 2,800 mm, loading space volume: 93 m³, Equipment: ABS, * 9654 - Vehicle ID for telephone inquiries * ABS, BPW Eco-Plus axles, disc brakes, air suspension with lift/lower function, 1st axle lift axle, storage box, portal doors, adjustable partition wall, sliding tarpaulin, platform, front door in bulkhead * Brakes completely NEW * Tires 1st axle: 385/65R22.5 ( 3 / 12 mm ) * Tires 2nd axle: 385/65R22.5 ( 11 / 8 mm ) * Tires 3rd axle: 385/65R22.5 ( 12 / 7 mm ) ----Our email address: Our services for you: - Procurement of short-term or export license plates Ksdpfx Aswk Ttxsg Uodl - Transfer / delivery EU-wide - Customs clearance for third-country export If you have any questions in Russian, you can call the following number * WhatsApp just for Russian speakers: * WhatsApp for English, German and other languages:

Condition: new, Year of construction: 2026, Jansen AS-600 Branch Saw Pruning Shears Year of Manufacture: 2026 Suitable for wheel loaders, telehandlers, or tractor front loaders Ksdpfovt Nazox Ag Uedl Branches up to 200 mm in diameter Smooth operation Very clean cutting pattern 3 specially hardened saw blades (each with 80 teeth) Blade diameter: 600 mm Each blade weight: approx. 14 kg Working width: approx. 1750 mm Hydraulically driven via V-belt Boom can be extended sideways by approx. 1000 mm Side-mounted counterweight (approx. 265 kg) Including hydraulic hoses Required hydraulic connections on carrier vehicle: 3x double-acting Mounting: Euro front loader mount Saw blades: 3 pcs. Saw blade drive: V-belt Saw blade diameter: 600 mm Saw blade thickness: 5 mm Saw blade teeth: 80 pcs. per blade effective cutting width: 1,750 mm Maximum branch diameter: 200 mm Lateral extension: 1000 mm Operating speed: 2 - 13 km/h Hydraulic connections: 3x double-acting Hydraulic hoses: 6 pcs., each 9 m Oil pressure: 160 - 210 bar Hydraulic flow rate: min. 45 l/min Weight: approx. 790 kg Weight with packaging: approx. 830 kg Packaging dimensions: 2280x930x1170 mm Scope of delivery: storage stands, saw blade guard, and hydraulic hose set (6 pcs., each 9m) ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right to prior sale, as we also offer this item on other platforms. We strongly recommend inspection and testing to avoid any misunderstandings about the condition and suitability for the buyer. Inspections and tests are possible at any time by appointment and are expressly encouraged!!! Images may be similar and can include optional accessories at extra cost. The stated internal dimensions are approximate values. For new vehicles, additional costs for vehicle registration documents and freight may apply. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! TRADE DEALS AND ADDITIONAL PAYMENTS POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers always in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax: