Agricultural machine

Jansen AS-600 Astschere Traktor Frontlader 1,75m

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured using a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, component chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brake 22.5" Ncodpfx Akefakkcocjw Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st + 3rd axles can be lifted separately with an assistance function (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120 kingpin screwed into a 10 mm thick plate Fifth Wheel Aluminum swivel landing gear, 2 x 10 tons support load, for air suspension, we use swivel feet Braking System According to E.G. standard, two-line braking system, EBS E-system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical System According to STVZO guidelines with 2 LED five-chamber lights type Aspöck Europoint LED integrated in the aluminum rear panel, 24-volt system with 1x 5-pole and 2x 7-pole socket, with side marker lights in LED design, 2 separate LED work lights at the rear, 2 LED work lights on the side starting at the 1st axle, at the height of the fifth wheel supports, 1 LED work light inside, at the front left, operated from the outside Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted at a relatively close spacing (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum swing doors, 50/30 mm thick, with 4 swivel rod locking mechanisms, attached in the welded aluminum rear frame in Teflon and stainless steel bearings, moving aluminum side wall suspended on the reinforced aluminum upper belt with "Kevlar liner for complete emptying, lateral brush seal and additional Kevlar liner on the side, integrated discharge chute with foldable cover plate in the floor end, operable from the outside, left rear, viewing window at the rear left, 1 sample slide in the rear doors, thus 2 pieces, service door at the front left Hydraulic System "Cargo Floor sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 670 PE-HD gliders, approx. 6mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed mountings on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed mountings, line size NW 21, fixed mountings with a size and design to be specified, operating pressure 190 max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operatio

Condition: used, Year of construction: 2009, Massey Ferguson 5475 Dyna-4 with Hydrac EK 2500XL Year of make 2009 Transmission Dyna-4, partial power shift 16-16 Engine Perkins 135 HP Max speed 40km/h Tires dimensions rear: 600/65 R38, front 480/65 R28 Weight 5400 kg Height 2790mm/279cm Width 2010mm/201cm Ncsdpow T R Eisfx Akcew Lenght 4810mm/481cm Pto 540/1000 3 pairs of hydraulic quick hitches Trailer hydraulic brakes hitch Trailer lights plugin Gramer trailer attachment Hydrac EK 2500XL front loader Hydraulic pump flow 110 l/min

Condition: used, power: 70 kW (95.17 HP), next inspection (TÜV): 08/2026, Year of construction: 2012, operating hours: 6,900 h, Equipment: air conditioning, all wheel drive, cabin, front linkage, Deutz-Fahr TTV 420 tractor with 95 hp from a single owner for a large urban municipality. 40 km/h version. Continuously variable TTV transmission, reverse gear on the steering wheel, 3 automatic, manual, and PTO driving modes. Continuously adjustable speed via rocker switch. Deutz 4-cylinder turbodiesel engine with intercooler. Stoll industrial front loader with electric joystick control and an additional 3 control circuits at the front with pressureless return for oil motors, e.g., sweepers or similar. Dual-circuit and single-circuit trailer air brake system including compressed air supply system. Automatic height-adjustable drawbar. 4x double-acting control valves. Pressure-free return. EHR rear hydraulics. Cat. 2 PTO 540, 750, 1000 rpm. Ncsdpfx Ajykxhaskcow Rear tires 90% 520/70 R34. Front tires 50% 440/65 R 28. Air conditioning. Work lights. Pop-up window. Openable roof hatch. Suspended comfort seat. Diff lock. All-wheel drive can be engaged. 4x oil-immersed disc brakes. Switch for rear hydraulic lift and PTO engagement can be engaged externally at the rear. The tractor has always been regularly serviced. No winter service. The tractor is in very good visual and technical condition.

Condition: used, Year of construction: 2024, Wedge flange gate valve 6'' VL with back Wedge flange gate valve 6'' VR with / back Blind cover galvanized, for quick coupler 6' Bracket for suction nozzle / VR 1 swivel joint Docking device NW200 rear top for TAV tank size / 25.250l Bereifu Ncjdott A Umopfx Akcjw

Condition: used, Year of construction: 1976, power: 21 kW (28.55 HP), fuel type: diesel, Three-point / rear hitch, two-wheel_____Fully functional. Proof of ownership (purchase contract), storage location: 17094 Pragsdorf. Nsdpev Ddzzjfx Akcjcw

Condition: used, maximum load weight: 36,540 kg, overall weight: 48,500 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 07/2028, Year of construction: 2020, Equipment: ABS, Internal vehicle number: G400133 Available immediately at our location in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Low-loader LANGENDORF SATÜ 30 – 10.0 m with wheel recesses Year of manufacture: 2020 Remote control 3 axles – 2 steered – 1 liftable Length: 13,900 mm Loading area: 10,000 mm Technically permissible total weight: 48,500 kg Unladen weight: 11,960 kg Financing example: * Internal number: G400133 * Purchase price: €59,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €925.02 * Residual value: €11,380.00 If you are interested in this offer or would like to adjust it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH Ncodpjy A Uxaefx Akcow We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, maximum load weight: 25,645 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of immediately and soon-to-be available vehicles on our website. Excerpt from equipment specification. Complete specification available on request. Load area: - Low-bed design with central beam, extendable version, approx. 6,750 mm in length - 5 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Hydraulic lifting/lowering gooseneck, detachable Rear chassis: - Short rear chassis with closed outer frame and checker plate covering - Chassis with excavator trough, closed in the rear half for housing the air tanks - 2 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Air suspension with raise/lower control valve Tyres: - Tyres 245/70 R 17.5, 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Brake system: Nsdpfx Aksxf Silececw - Wabco braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) top coat in RAL 3000 Flame Red Including the following additional equipment: - 2 kingpins - Galvanised steel front wall, approx. 400 mm high - Remote steering from front and rear, operated by cable remote control with push buttons, including single tracking control for the axles (no installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including load diagram - On the gooseneck, removable aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). Rear galvanised stake pockets are removable. (Body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switch on the trailer, mounted on the left and right of the gooseneck platform - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stake pockets for insertable posts approx. 100 x 50 mm in the outer frame of the load area, 2 pairs in the chassis outer frame - Galvanised, extendable width extensions approx. 230 mm per side - Hydraulic connections from gooseneck to low bed with multi-coupling (instead of screw couplings). No seal guarantee included. - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard NLGI-2 grease, with removable protection around the pump - 2 pairs of WADER container locks on the loading area, for 1x20' container - 1 removable galvanised intermediate table with 1 pair of WADER container locks - 1 pair of steel ramps for bridging the low bed’s hook mountings - Anti-slip sand-coated layer painted on the load area - HRM Metallisation (High Resistance Metallisation)

Condition: used, Year of construction: 2019, operating hours: 1,091 h, power: 124.26 kW (168.95 HP), Equipment: air conditioning, all wheel drive, front power take-off, AGROTRON 6175 RC SHIFT used DEUTZ FAHR all-wheel-drive tractor Technical year: 2020 C-Shift Front axle suspension Tyres front: 540/65 R 30 MITAS Tyres rear: 650/65 R 42 MITAS Front hydraulics Ncedpfx Akoy H S Ugjcow 2 electric / 4 mechanical spool valves Power Beyond 4-speed PTO Automatic air conditioning Cab suspension FJ-Dynamic steering system with steering wheel motor and RTK activation LED work lights

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Subframe made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering system, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting aid (without central control unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg) Nedpfxsgcw Rio Akcecw Kingpin Aluminum landing legs, manufacturer: Alu-Leg, 2 x 10 tons support load, for air suspension, we use swivel feet. Braking System According to E.E.G. standard, two-circuit braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1x 15-pole and 2x 7-pole socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpin, 1 LED work spotlight inside at the front left, operable from the outside. Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system installed on 140 mm aluminum crossmembers, floor load approx. 7 tons/m2, crossmembers mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30 mm thick with 4 swivel rod locks, mounted in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, a following aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar tarpaulin" for complete discharge, lateral brush seal and additional Kevlar tarpaulin on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside on the left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24-plank system - smooth design Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, without hydraulic hoses. Accessories PVC fenders wi

Condition: used, maximum load weight: 28,200 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2011, next inspection (TÜV): 03/2027, loading space length: 13,450 mm, loading space width: 2,470 mm, loading space height: 2,800 mm, loading space volume: 93 m³, Equipment: ABS, * 9654 - Vehicle ID for telephone inquiries * ABS, BPW-Eco-Plus axles, disc brakes, air suspension (raise and lower), 1st axle is a lift axle, tool box, portal doors, adjustable partition, roll-up tarp, platform, front door in the front panel * Brakes completely NEW * Tires, 1st axle: 385/65R22.5 (3/12 mm) * Tires, 2nd axle: 385/65R22.5 (11/8 mm) * Tires, 3rd axle: 385/65R22.5 (12/7 mm) ----Our email address:     Our service for you:       - Obtaining short-term or customs license plates       - Transportation / delivery throughout the EU       - Customs clearance of vehicles to third countries Ncjdpjwk Ttxofx Akcjw Whatsapp for English, German, Russian, and other languages: