Tipper semitrailer

FLIEGL Stahlhalbschalenmulde 3x9t iso, DHKS 390, 24 cbm

Condition: new, empty load weight: 15,550 kg, maximum load weight: 47,450 kg, overall weight: 63,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm -Rear gooseneck with bevel approx. 1,000 mm x 10° Loading area: -Loading area in extendable design, length approx. 8,800 mm, with bevel at the rear approx. 500 mm x 10° -One recess protruding into the loading surface and into the chamfer to accommodate the excavator dipper arm -Pneumatic locking with conical locking pins and reinforced locking positions Cgedpfx Ajk Aht Ujaxst -Hardwood covering on the bevel of the loading area Ramps: -1 Pair of two-part steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm -Ramps with hardwood decking -Hydraulically folding ramp tips -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -Square climbing ledges 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and suspension: -BPW axles and suspension, 1st axle with preload steering, all other axles with forced hydromechanical steering -Technical axle load: 12,000 kg -1st axle with electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -235/75 R 17.5 twin tires -TPMS tire monitoring system in accordance with ECE R141 -TPMS tire monitoring sensors mounted in all wheels including spare wheels Accessories included: -steel front wall, pluggable, approx. 400 mm high -3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches -Parking position on the gooseneck for the warning signs when not in use -1 Spare wheel -On the gooseneck 1 pair of plug-in ALU side panels, approx. 400 mm high, anodized -One plug-in ALU rear panel on the gooseneck, approx. 400 mm high, anodized -Approx. 40 mm thick hardwood covering over the gooseneck, checker plate covering over the kingpin -2" kingpin -Guide plate from the gooseneck for the saddle plate, approx. 500 mm wide -4 wheel chocks -Mechanical seat posts with 2-speed gearbox and crank -JOST module B - static test load = 50,000 kg -1 Intermediate table, approx. 300 mm wide -Widenings (galvanized) extendable by approx. 230 mm per side -Wheel recesses with square climbing rails -ALU covers for the wheel recesses -1 pair of mechanical rear supports -Steering can be operated from the front and rear by cable remote control, with tracking control of the axles -1st axle with automatic lift axle function -Central lubrication system with 1 pump, BEKAMAX brand -Radio remote control for operating the self-steering, in addition to the cable remote control, with 2 indicator lights on the receiver as toe-in control -Wabco Smart Board System -4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Condition: new, empty load weight: 11,000 kg, maximum load weight: 38,500 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - 1 pair of permanently installed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with 15 x 15 mm square anti-slip bars and widened at the lower section - Between the 1st and 2nd axle, one pair of permanently installed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the rear slope projecting into the loading area for excavator dipper arm storage, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) - Including 3-piece removable galvanized covers over the wheel recesses – max. point load 3.5 t per section Two-part Steel Ramps: - One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with 48 mm thick hardwood surfacing - Ramps with hydraulically foldable ramp sections, hydraulic lifting gear, and hydraulically transverse-adjustable Axles and Tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear or manually - Air suspension with raise/lower valve - Axle tool kit - Tires: 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories Included: - At the gooseneck and at the rear, left and right, each with a holder for warning signs, including socket - One spare wheel - 2" king pin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - 4 wheel chocks - Galvanized extensions, extendable by approx. 230 mm each side - Galvanized folding supports under the sloped rear of the loading area - Holder for rotating beacon at the rear of the trailer - Cover plates to bridge the gap between the ramps and loading area - White reflective tape in accordance with EU regulations on the sides and on the extension, red at the rear - Rear-mounted electro-hydraulic power unit underneath the loading area - Ramp control valves mounted on the right-hand side of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Four extendable warning signs, about 423 x 423 mm, each with a position light (extendable about 400 mm) - Mounting for rotating beacon on the warning signs - On the gooseneck, plug-in aluminium side walls and rear wall ca. 2,440 x 400 mm - The rear, galvanized plug-in posts are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for one 20ft or 30ft container Cedpfx Asup U Hzoaxsgt - 3 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - One removable, galvanized intermediate table with 1 pair of WADER container pockets - Square anti-slip bars 20 x 20 mm every 200 mm on the outer frame of the rear slope - Painted sand grip layer as anti-slip protection on the checker plates on the gooseneck and loading area - 80 km/h speed stickers at the rear and on both sides - Ax

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,410 mm, loading space height: 2,300 mm, loading space volume: 54 m³, Year of construction: 2025, Equipment: ABS, !!FOR SALE, FOR RENT OR RENT WITH PURCHASE OPTION UPON AGREEMENT!! Approx. 52 m³ Grain Tipping Trailer, Aluminum - Manufacturer: Benalu - Model: Grain Tipping Trailer - Year of Manufacture: NEW VEHICLE - Volume: approx. 54 m³ (9.50 m long x 2.41 m wide x 2.30 m high) - Gross Vehicle Weight: 39,000 kg - Unladen Weight: approx. 5,600 kg - Axles: 3 axles / disc brakes - Tires: 385/65 R22.5 on Speedline aluminum rims Cgsdstf Sahjpfx Aaxjt - Suspension: Air suspension with raise/lower function - EBS Wabco - Combination door (swing doors and pendulum tailgate) - Pneumatic unlocking of the pendulum tailgate during tipping - 2x grain discharge chutes - 5mm floor - Individual wheel mudguards - Unladen support leg - Folding underrun protection - Load pressure gauge - Operator platform at front - Rolling tarpaulin - Toolbox German vehicle!! German papers!! FOR SALE, FOR RENT OR RENT WITH PURCHASE OPTION UPON AGREEMENT!! Images are for reference only!!