Low loader semitrailer

Möslein ST 3 3 Achs Satteltieflader neu

Condition: new, empty load weight: 10,600 kg, maximum load weight: 37,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air suspension with lift axle, axle load gauge for axle load, high bed length approx. 3,500 mm, low bed length approx. 8,800 mm, loading height approx. 900 mm, for 2-axle and 3-axle tractor units, front wall approx. 800 mm high, 16 stake pockets in the outer frame, 32 lashing eyes, ramp approx. 3,100 mm long, ramps for driving over the gooseneck, -- misprints, errors, and changes excepted, sample images --, More data under: !, More Details: ! Dedpfx Agoyu Tf Uococf

Condition: excellent (used), axle configuration: 3 axles, total length: 15,700 mm, total width: 2,750 mm, total height: 1,290 mm, suspension: air, tire size: 245/70R17.5, color: orange, Year of construction: 2010, Color: Orange Loading capacity: 40,600 kg Loading floor height: 54 cm Extendable Braked Main Features Manufacturer: Goldhofer Model: STZ VKL3 34/80 A Chassis number: WG0STZV3590030501 Year of manufacture: 2010 Weights / Payload King-pin load: 24,000 kg Axle load: 11,200 kg Total axle load: 33,600 kg Gross vehicle weight (GVW): 57,600 kg Unladen weight: 17,000 kg Payload: 40,600 kg Axles Axle make: BPW ECO Air suspension All axles hydraulic-steered High/Low control valve AGS / ALB / ABS Tyres: 245 / 70 R17.5 twin mounted Load index: 143/141G Dimensions Length: 15,700 mm – 26,000 mm Loading floor length: 6,600 mm Extension: 4,300 mm Slide-out beams: 6,000 mm Dedpfxjuu Hifs Agcscf Max. loading floor length: 16,900 mm Loading floor width: 2,750 mm Beam thickness: 380 mm King-pin height: 1,295 mm Additional Information Operated via truck hydraulics Lashing rings Hydraulically operated gooseneck Detachable gooseneck Oversize load marker boards Rear underrun protection with lighting King-pin diameter: 2.0'' Central lubrication system Removable floor sections 4x extension crossbeams Toolbox at gooseneck = Further information = General information Year of manufacture: 2010 Axle configuration Tyre size: 245/70R17.5 Axle make: BPW ECO Suspension: Air suspension Rear axle 1: Twin tyres; Max. axle load: 11,200 kg; Steered Rear axle 2: Twin tyres; Max. axle load: 11,200 kg; Steered Rear axle 3: Twin tyres; Max. axle load: 11,200 kg; Steered Weights Unladen weight: 17,000 kg Payload: 40,600 kg Gross vehicle weight: 57,600 kg Functional Loading floor height: 55 cm Extendable structure: Yes Condition Technical condition: Very good Visual condition: Very good Financial information Price: On request

Condition: used, mileage: 553 km, power: 316 kW (429.64 HP), first registration: 06/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: air conditioning, ----* Day registration on 22.06.2023! * MAN 7-inch media system * Connectivity board module * MAN speaker system Dedpev Hlxgjfx Agcocf * Air conditioning, manual * Multifunction steering wheel ----* Traction control (ASR) * Cruise control (FGR) * Electronic braking system (EBS) * Anti-lock braking system (ABS) * Emergency braking assistant * High-performance engine brake MAN EVBec, adjustable * Steering/lift axle ----* Euromix EMK 10D three-way tipper * HIAB X-HIDUO 228 E-6 loading crane * Remote control * 2x hydraulic outriggers * Ringfeder towing coupling ----Internal vehicle number: 10297----Subject to errors and prior sale. WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: new, empty load weight: 17,250 kg, maximum load weight: 48,700 kg, overall weight: 66,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,480 mm, loading space height: 375 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 17,250 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and removed hydraulically -For tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Low bed: -Low bed with external supports, designed as a telescopic tank bridge in low construction with extension at the front -Length x width approx. 7,550 mm x 2,740 mm -Mechanical locking of the extension Chassis: -Chassis at the rear with closed outer frame -Checker plate covering and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear Axles, suspension and tires: -"PENDEL-AXLE", all axles hydromechanically forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint in a single color in "FAY-Gray-34-0260" -Technical axle load 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 Accessories: -Steel bulkhead, plug-in, approx. 400 mm high -4 wheel chocks -Gooseneck in the rear upper area closed with a removable cover -1 pair of steel ramps with climbing strips and fastening bolts to bridge the hooks of the low bed -The ramps can be placed over or between the hooks -Fastening options for the steel ramps at the rear between the outer supports of the gooseneck -One Locking point approximately every 1,000 mm on the extension -1 lashing ring on the left and right on the front cross member -Connection strip for supply lines to the tractor unit, attached at the height of the outer frame profile Dcsdpfx Agsh Hm Tzecof -6 pairs of threaded blocks on the outside of the inner supports of the loading area for mounting screwable rings M24 -6 pairs of countersunk lashing rings on the outside of the outer supports of the loading area, foldable inwards and outwards -1 pair of threaded blocks at the front and rear of the outer supports of the loading area for mounting screwable rings M24 -Hanging strip for loose aluminum loading ramps on the vehicle's end cross member -Central lubrication system with 2 pumps, BEKAMAX brand -Steering from the front and rear, operated by cable remote control, with alignment control of the axles -3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches -Removable loading floor (galvanized) in 3 elements can be inserted between the outer supports with hardwood flooring -Foldable extensions, by approx. 230 mm per side -Extension planks, loose, framed in steel -4 warning signs approx. 423 x 423 mm -Radio remote control for operating the steering -3.5" king pin -Anti-slip sticker on the left bevel of the gooseneck -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Guide plate from the gooseneck for the fifth wheel plate, approx. 800 mm wide -1 spare wheel with mounting adapter -Parking position on the gooseneck for the warning signs when not in use -2 pairs of stake pockets embedded in the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm -Dipper handle recess of the rear chassis closed at the back with a plug-in plate -Color of the trailer MB 7350 Novagrau

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles Dcjdpfx Agohlz R Secjf -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: new, functionality: fully functional, mileage: 100 km, power: 382.46 kW (520.00 HP), first registration: 08/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x4, next inspection (TÜV): 08/2026, fuel: diesel, brakes: intarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 6,600 mm, Year of construction: 2025, operating hours: 10 h, Equipment: ABS, additional headlights, air conditioning, car registration, crane, cruise control, differential lock, hydraulics, low noise, navigation system, onboard computer, retarder, trailer coupling, MAN TGS 33.520 6x4 BL CH Dcjdpfx Aew U Snuegcof PALFINGER PK18002EH-C Front Crane HYVA 20-53 SK Titan Hooklift First registration: 28/08/2025 • Automatic transmission • ZF intarder • 520 HP • NN cab • Drive: 6x4 • Differential lock on driven rear axles • Leaf suspension front / air suspension rear • Emission standard: EURO 6e • Air-suspended cab suspension • Medium-height design • Aluminum diesel tank • Driver-side construction step • Sun visor • 2 x air horns on cab roof • 2 x LED roof beacons on cab • 2 x LED work lights on rear cab roof • 2 x LED strobe lights in front grille • 2 x LED strobe lights at vehicle rear • Comfort driver's seat • Multifunction steering wheel • Cruise control • Navigation system • MAN EasyControl operation panel, 4 functions with door open • Automatic climate control • Refrigerator • Tow hitch with trailer equipment • Toolbox • Mesh pocket • MAN EasyStart roll-away protection • Wide tires at the front • Reversing camera PALFINGER PK18002EH-C Front Crane • 4 hydraulic extensions • Radio remote control • Raised stand with control console • 180° hydraulically tiltable outriggers • Support pads with holders Options: • Rotator • Clamshell bucket • Rotator hook • Load hook HYVA 20-53 SK Titan Hooklift • Push articulation system • Lifting and tilting force: 20 t • Tipping angle: 53° • Hook height: 1,570 mm • Push and articulation length: 1,000 + 1,150 mm • High-speed operation • Hydraulic underrun protection Available as an option: • MEILLER loading platform • Internal dimensions: 5,200 x 2,450 x 600 mm • Stone flap • Recessed lashing points in deck floor • Lashing points in front wall • Excavator blade mount • Drop-side panels left and right • Lashing points in side walls • Extendable ladder holder IMMEDIATELY AVAILABLE!!! Financing – leasing / hire purchase / rental – possible! Internal reference: 40290

Condition: excellent (used), axle configuration: 2 axles, first registration: 03/2015, loading space length: 134,450 mm, loading space width: 2,550 mm, loading space height: 480 mm, suspension: hydraulics, Year of construction: 2015, Equipment: ABS, = Additional options and equipment = - Central lubrication = Further information = Axle configuration Suspension: hydraulic suspension Rear axle 1: Max. axle load: 12,000 kg; Steered Rear axle 2: Max. axle load: 12,000 kg; Steered Weights Unladen weight: 12,660 kg Payload: 34,340 kg Gross vehicle weight: 47,000 kg Djdpfx Aovtc Aisgcscf Functional Loading platform height: 48 cm Extendable body: Yes Condition Technical condition: very good Visual condition: very good Financial information Price: On request Further information Contact David F Middelman for more information.

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK Dsdjrgzv Nepfx Agcecf * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, mileage: 53,857 km, power: 270 kW (367.10 HP), first registration: 06/2003, fuel type: diesel, overall weight: 36,000 kg, axle configuration: 3 axles, color: yellow, gearing type: automatic, emission class: euro3, total width: 2,680 mm, total height: 3,750 mm, Equipment: parking heater, Liebherr UTM 735 - Crane: LTM 1055/1 - Year of manufacture: 2003 - 22,439 operating hours (carrier chassis) - 18,883 operating hours (crane superstructure) - 53,857 km mileage - 4 x hydraulic boom extension - 16 m jib - Hydraulic steering - 12 t additional counterweights Dcedpfxow H Hwvs Agcef - LED beacon lights - Technical inspection due: - Safety inspection due: 01.2026 - Tyres: 445/95 R 25 Subject to errors and prior sale. Internal vehicle number: 11218 WhatsApp support available! For questions about the vehicle or for further information, feel free to contact us conveniently via WhatsApp.

Condition: used, first registration: 12/1999, overall weight: 5,500 kg, Equipment: crane, Crane: Dcodpfx Agox Dzrmecjf ----- Remote control - Fassi 210 crane, 5x hydraulic extensions - grab line - pallet hook