Working platform semitrailer

SCHMITZ CARGOBULL SCS 24/L - 13.62 / Lift/ CONTAINERVERRIEGELUNG !

Condition: new, maximum load weight: 30,540 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, loading space width: 2,550 mm, loading space height: 2,990 mm, total width: 2,550 mm, total height: 1,010 mm, Year of construction: 2025, Equipment: ABS, SCHWARZMÜLLER 3-AXLE FLATBED SEMITRAILER RH100 – EXTENDABLE – For Building Material and Construction Machinery Transport, NEW VEHICLE GVW (technical): 39 t Axle load (technical): 27 t Fifth wheel load (technical): 12 t Kerb weight approx. 9 t (+/- DIN tolerance) Flatbed length approx. 13,500 mm = front approx. 4,150 mm, rear approx. 9,350 mm Flatbed width approx. 2,540 mm Loading height front approx. 1,060 mm at kingpin height approx. 980 mm; rear 1,010 mm Extendable lightweight welded steel frame construction Extension length approx. 4,000 mm, lockable at intervals of approx. 500 mm Reinforced design for building material transport: 20 t/5m at the center of gravity, machinery transport up to 20 t (retracted) Reinforced U-profile outer frame 6 mm Tapered crossmembers 4 mm Rear frame bevel, approx. 15°, approx. 500 mm Visual indicator for pneumatic frame lock on both sides, with Green control lamp = indicator light for pneumatic frame lock at Front left of the trailer Energy drag chain in the central frame Frame lock with integrated grease strip 4 pairs of extendable 8 t lashing rings, rear 9 pairs of extendable 10 t lashing rings in the outer frame profile, foldable outwards on both sides for oversize securing 10 pairs of lashing mushrooms with welded round bar under the outer frame 6 pairs of insert pockets with reinforced brackets for box section stanchions 80x50x5 mm (longitudinal, approx. 3 mm clearance), on both sides of the outer frame 3 insert pocket cross-members for box section stanchions 80x80 mm, at central beams Insert pocket cross-members as empty holders for box section stanchions 6 pairs of recessed container locks for: 2 x 20 ft containers 1 x 20 ft container centered 2 x 20 ft containers 1 x 30 ft container Reinforced rear end plate with continuous rail for loading ramps Manual 2 x 12 t landing gear, single side operation + load equalizer 2 drop-down support feet at the rear SAF Intradisc B9 axles with disc brakes ø370 mm (19.5" disc), Load capacity 9 t/axle, on-road design Axle spacing 1,310 + 1,410 mm Wheelbase 7,650 mm Self-steering SAF trailing axle, approx. 10° steering angle, electrically pneumatic reverse lock activated automatically in reverse, additionally for cab switch with release valve Special axle lift on 1st axle, lifts/lowers automatically depending on weight, Kledpfxswfu N Ro Afnju with forced lowering, starting aid button in cab / "3 x braking" Odometer 6x tires 435/50 R 19.5, 164J 6x steel rims 14.00 x 19.5 Braking system EU Directive 71/320 ECE R13 2-line air braking system, EBS 2S2M, one axle monitored RSS/RSP stability program Spring-actuated parking brake Steel air tanks Air suspension with lift/lower function, total stroke approx. 200 mm Automatic ride height at 15 km/h Quick release valves SWIT – Schwarzmüller Intelligent Telematics, service package “BASIC” Axle load display EBS-CAN bus signal Tire pressure monitoring per ECE Directive 141 35 mm wooden floor, laid lengthwise, steel chequer plate covers over wheels Wooden floor impregnated on both sides Reinforced steel front wall approx. 1,800 mm + center posts integrated in front wall 2 lashing eyes in upper corner posts Front steel corner posts integrated in front wall (full side loading length) 24-volt lighting system according to EU Directive 76/756/EEC 2 full LED multi-chamber tail lights “Aspöck” with integrated control unit Flashing LED side marker lights

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 03/2003, loading space length: 12,500 mm, loading space width: 2,550 mm, loading space height: 1,620 mm, total length: 12,500 mm, total width: 2,550 mm, total height: 1,620 mm, suspension: hydraulics, tire size: 275 / 70 R22.5, color: beige, Year of construction: 2003, Axle Configuration Tire size: 275 / 70 R22.5 Axle brand: SAF Suspension: hydraulic suspension Kljdpfx Aeuu E S Sofnju Rear axle 1: Twin tires; Lift axle; Max. axle load: 10,000 kg; Steerable Rear axle 2: Twin tires; Max. axle load: 10,000 kg Rear axle 3: Twin tires; Max. axle load: 10,000 kg; Steerable Rear axle 4: Twin tires; Max. axle load: 10,000 kg; Steerable Rear axle 5: Twin tires; Max. axle load: 10,000 kg; Steerable Weights Unladen weight: 13,100 kg Payload: 61,900 kg GVW: 75,000 kg Functional Loading platform height: 162 cm Condition Technical condition: very good Optical condition: very good Financial Information Price: Upon request

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2004, * Caster steering axle Kljdpfswi Edmjx Afnju * Air suspension * Bulkhead * Unladen weight: 6,200 kg -----Internal vehicle number: 9150-----Subject to errors and prior sale.

Condition: used, maximum load weight: 30,250 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2014, next inspection (TÜV): 06/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, Year of construction: 2014, Equipment: ABS, Schwarzmüller Platform Flatbed Trailer Lift Axle Permissible total weight: 36,000 kg, Unladen weight: 5,750 kg, Payload: 30,250 kg, SAF axles, Lift axle 1st axle, Air suspension, Disc brakes, Underride protection right, left, and rear, 2x storage compartment right, 1x storage compartment left, Rubber rear impact buffer, 2x extensible wide load signs at the front, 2x extensible wide load signs at the rear, 2x crank supports operable from right side, EBS, ABS, Perforated external frame with hole spacing approx. 100 mm, Wheelbase: approx. 6,350 + 1,310 + 1,310 mm, External dimensions LxW: approx. 13,840 x 2,550 mm, Loading area LxW: approx. 13,620 x 2,480 mm, Front wall height: approx. 2,400 mm, Loading height: approx. 1,250 mm, Tires: 385/65R22.5, Tread depth tires left front: 4 mm, Tread depth tires left middle: 16 mm, Tread depth tires left rear: 8 mm, Tread depth tires right front: 5 mm, Tread depth tires right middle: 15 mm, Tread depth tires right rear: 10 mm, Further equipment: Reinforced steel frame welded construction for point load 20 t over 4 m at frame center of gravity for ASH unladen 1,090 - 1,190 mm with air-suspended tractor, replaceable 2" kingpin (EU installation size, corner dimension 2,040 mm), Perforated external frame with hole spacing approx. 100 mm, oval hole 40/25 mm according to DIN EN 12640 Air suspension with lift and lower function (approx. +120/-80 mm), Automatic setting of driving level from 15 km/h, SAF "Intradisc-plus-Integral" air suspension unit with low-maintenance disc brakes, ø 430 mm, 3 x 9 t rigid, wheelbase 2 x 1,310 mm, Kodpfswqyrhsx Afnolu Front axle automatically liftable = 2-sided lift (1 x 96307) lifts and lowers automatically depending on weight (when lift axle is raised, the loading or total height increases by approx. 50 mm) and additionally with forced lowering incl. integrated start-up aid limited by speed for button operation in the cab (without button installation), 1 odometer = hubodometer (ECO-Meter) (KIT No. 10801, with hubcap KIT No. 52917) (on 2nd axle front right), Mech. 2 x 12 t support winches, single-sided operation and push compensation, Two-line brake, EBS-E - electronic brake system (Wabco 2S2M = one axle = 2nd axle monitored), RSS - stability program, Spring-loaded parking brake on 2 axles, Aluminum air tank, unpainted, Plywood floor 27 mm, flush with outer frame, 2 steel hat profile rails above the longitudinal beams plus additional 12 mm plywood floor, beveled to the outer frame, Fixed aluminum hollow profile front wall 2,400 mm with 2 center supports,

Condition: used, maximum load weight: 29,200 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2007, loading space length: 13,470 mm, loading space width: 2,470 mm, Equipment: ABS, Foedisch FOEAPL13.6 Platform Payload 29200 kg Kodpfx Aju Ddldsfnolu Tires 385/65 R 22.5 Lift axle 1st axle Trailer length 13800 mm Loading area L x W 13470 x 2470 mm Loading height approx. 1400 mm

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,540 mm, total width: 2,540 mm, Year of construction: 2026, Equipment: ABS, WEB TRAILER PRSH 27 PLATEAU with hardwood floor Kodpeg Dkx Ejfx Afnjlu Dimensions: Chassis width approx. 2480 mm Chassis length approx. 13620 mm Wheelbase approx. 7700 mm Support winch position approx. 2300 from kingpin (only 2-axle tractors) Ride height .1280 mm at 1150 mm fifth wheel height Spring center approx. 1300 mm Fifth wheel load max. approx. 12000 kg Axle loads: 24 000 kg Approval: CoC papers Chassis: Chassis made of welded longitudinal members and through-bolted cross members Outer frame height approx. 125 mm, 4 mm with groove for lashing eyes 13 pairs of lashing eyes (bracket) screwed into the outer frame with groove, 5t each!! Landing gear: 24 ton telescopic landing gear, branded product (Jost/SAF) Axles Branded product (SAF/BPW/JOST) 9 ton 22.5" disc brake, total stroke approx. 180 mm without axle lift (option) Axle spacing approx. 1310/1310 mm Brake: EBS braking system, Knorr or Wabco Air connections, coupling head red and yellow Lifting and lowering device with 1 rotary slide valve, Knorr/Wabco Air tank 2 x approx. 80 l Tire pressure control Lighting system: LED 15-pin connection at the front Flashing SML Tires: Branded tires 385/65 R 22.5 on steel wheels Construction: Steel bulkhead approx. 1200 mm high, with sheet metal cladding, bolted on Design Floor: Weatherproof hardwood floor 28 mm alternating with galvanized Omega steel profiles Hardwood boards screwed onto the crossbeams (optional double screwing) Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283 Attachments: Rear lamp plate premium, large and edged Underrun protection in welded design (rectangular tube) Access ladder rear right, foldable and extendable with platform Two wheel chocks with bracket, plastic or galvanized Plastic mudguards 180° above each axle Side collision protection on both sides aluminum or plastic profile Coating: Chassis painted in RAL 9005 or Nova gray 7350 Other colors at an additional cost (only if color is available in powder) KTL with zinc phosphating plus powder, highest corrosion protection Hot-dip galvanizing (optional) Price ex works Attention!!! Images show special equipment Let us advise you and work out a free and non-binding offer. Leasing, financing or hire purchase possible! We can accommodate your wishes! Ask us - we will be happy to make you an offer. Subject to errors and prior sale!!!

Condition: used, maximum load weight: 24,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2008, Welcome to Johanning's commercial vehicles, your specialist for young and exclusive used cars. AVAILABLE IMMEDIATELY! Delivery & financing possible. Location, 39606 Osterburg ? Brand: Wilken Oldenburg ? Trailer ? 3 axles ? TÜV new December 2025 ? Tires approx. 70% ? 3rd axle steering and lift ? Tail lifts Johanning's commercial vehicles, your partner for exclusive and young used cars. Kodpfsvmlbnex Afnslu Our services - your advantages (after sale)- Trade-in of your vehicle possible (any condition)- Immediate deregistration of your vehicle free of charge- Registration service for 150 ¤ (including fees, license plate)- Short-term-- Inspection and test drive possible at any time after making an appointment by telephone- Free delivery possible by arrangement. Subject to errors and prior sale.

Condition: used, maximum load weight: 30,170 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2012, loading space length: 13,640 mm, loading space width: 2,490 mm, loading space height: 1,000 mm, total width: 2,550 mm, total height: 2,500 mm, Equipment: ABS, Platform body, screen-printed floor, continuous lashing holes in the outer frame, 4 stake pockets per side, JOST landing gears, extendable warning panels, ABS, EBS, BPW EcoPlus axle(s), disc brake system, air suspension with lifting and lowering device, 1st and 3rd axle - lift axles, 2x toolboxes, mount for beacon at the rear, vehicle may have advertising stickers and/or lettering. SI86626 Our offer is generally without a new roadworthiness inspection (TÜV). If a new TÜV inspection is required, we would be happy to provide a quote from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this unit. Kedpfxoyytfys Afnjlu Please contact us!

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2015, loading space length: 13,600 mm, loading space width: 2,520 mm, Equipment: ABS, Schmitz Cargobull S01 Flatbed with Lifting Axle and SAF Axles Ref. No. for inquiries: 1225958 * ABS * EBS * 3 axles, air-suspended * Lifting axle * Disc brakes * SAF axles Loading area dimensions: Length: 13,600 mm Width: 2,520 mm Tyres: 1st axle: 385 / 55 R 19.5 30% air-suspended / lifting axle 2nd axle: 385 / 55 R 19.5 30% air-suspended Kedpfxsyavigj Afnslu 3rd axle: 385 / 55 R 19.5 30% air-suspended ----Price: €3,900 + 19% VAT For further questions, you can reach us at the following phone numbers: * We speak: German, English, French, Polish, and ????? Errors, omissions, and prior sale reserved.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2014, Equipment: ABS, Krone Plateau Krone axles * Air suspension * Disc brakes * 1st axle liftable * 1 large storage box on the right * 1 plastic storage box on the left * Perforated strip on the right and left exterior sides * Mechanical Jost landing gear Kjdpfx Asv Tgt Ssfnolu * Tires 385/65 R22.5 We are happy to provide you with further information.