Crane truck

Scania R 540 Euro 6 Effer 100 Tonmeter laadkraan + Fly...

Condition: used, mileage: 86,472 km, power: 375 kW (509.86 HP), first registration: 04/2019, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: beige, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Truck: VOLVO FH 500 8X4 BL lift axle I-Shift top equipment Condition: very good, 7400 engine hours, 4900 PTO hours Tires: 60-90% Body: rear platform extendable Crane: FASSI F545RA.2.26 XE-DYNAMIC 6+4 jib Hnodpfx Aaswr Sw Eeisl

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs Hjdpfjrgzv Nox Aaionl * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, mileage: 129,252 km, lifting height: 38,000 mm, Year of construction: 2015, Drive: Wheel Unladen weight: 27,875 kg Lifting capacity: 23,800 kg Hodpfx Asw A Hb Tsaisnl Serial number: 122024 Front tyre condition: 70 Rear tyre condition: 70 Transport dimensions (L x W x H): 11.1 x 2.55 x 3.9 Please contact PFEIFER GROUP for further information.

Condition: used, mileage: 70,275 km, power: 390 kW (530.25 HP), first registration: 06/2021, fuel type: diesel, axle configuration: 8x8, wheelbase: 4,800 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, loading space length: 5,950 mm, loading space width: 2,470 mm, loading space height: 1,460 mm, Year of construction: 2021, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Remote central locking - Pintle hook - Hub reduction - PTO (Power Take-Off) - Radio - Reversing camera - Sun visor - Auxiliary heater - Toolbox = Notes = Mercedes-Benz Arocs 3253 8x8 Full spring suspension. 2 sets of tyres. Road: 385/65R22.5 315/80R22.5 Off-road: 14.00R20 Copma 650.6 Jib with 6 extensions. Winch. Front outriggers. Scanreco radio remote control. Personnel basket. Lifting capacities: 2.00 m - 27,520 kg 4.30 m - 12,800 kg 5.95 m - 9,070 kg 7.70 m - 6,840 kg 9.55 m - 5,380 kg 11.40 m - 4,420 kg Hnsdpfx Aex S N Hkeaiol 13.50 m - 3,680 kg 15.60 m - 3,160 kg 2 x manual extension 18.71 m - 1,720 kg 20.11 m - 1,520 kg 21.75 m - 1,240 kg 23.46 m - 1,000 kg 25.19 m - 870 kg 26.96 m - 800 kg 28.76 m - 720 kg 80 cm hydraulic extension on loading platform. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Drum brakes Suspension: Leaf suspension Front axle 1: Steering Front axle 2: Steering Weights Empty weight: 24,855 kg Payload: 12,145 kg Gross vehicle weight: 37,000 kg Functionality Crane: Copma Financial Information Price: On request Identification Type number: AROCS 3253 8x8 / 65 t/m CRANE + = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), Govorim po russki. We strive to provide accurate information, however, no rights can be derived from the posted texts.

Condition: used, mileage: 278,066 km, Year of construction: 2009, Drive: wheel Unladen weight: 72,000 kg Lifting capacity: 150,000 kg Cargo space dimensions: 1620 x 285 x 395 cm Serial number: 068506 Hedpfx Aaew D N Rasionl Front tire condition: 80 Rear tire condition: 80 Please contact PFEIFER GROUP for further information.

Condition: used, mileage: 53,318 km, lifting height: 110,000 mm, Year of construction: 2018, Drive: Wheel Unladen weight: 60,000 kg Lifting capacity: 250,000 kg Cargo compartment dimensions: 1586 x 299 x 399 cm Serial number: 088666 Front tire condition: 90% Rear tire condition: 90% Hjdpfx Ajwz Utzeaijnl Please contact PFEIFER GROUP for more information.

Condition: used, mileage: 45,700 km, Year of construction: 2005, Drive: wheel Unladen weight: 36,000 kg Lifting capacity: 45,000 kg Serial number: 53517 Tyre condition front: 70% Tyre condition rear: 70% Transport dimensions (L x W x H): 11.5 x 2.7 x 3.9 m Please contact PFEIFER GROUP for further information. Hodpfeyl Huwox Aaionl

Condition: used, mileage: 65,743 km, fuel type: diesel, color: yellow, Year of construction: 2009, Terex-Demag AC80-2. Year: 2009. Mileage: 65,743 km. Undercarriage hours: 3,200. Superstructure hours: 8,827. Weight: 47,850 kg. Maximum weight: 48,000 kg. 12-ton axles. Hnjdpfjy Dga Sox Aaiel 315 kW. Allison automatic transmission. Hydraulic suspension. Air conditioning. Webasto heater. 8x8x8 drive configuration. Analog tachograph. Boom length: 10.9 – 50.0 meters. Second winch. Double folding jib: 18 meters. 1-meter jib extension. 3 hook blocks: - 50-ton hook block - 20-ton hook block - Swivel hook Counterweights: - 1,900 kg - 700 kg - 1,900 kg - 700 kg - 1,700 kg - 3,450 kg - 1,900 kg - 2,550 kg - 1,200 kg Total counterweight: 16 tons. Tyres: 445/95R25, 80% tread remaining. ID No.: 150. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations from Heinhuis, as well as all agreements concluded with Heinhuis and all related negotiations. By responding in any way, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of them. Our prices are net export prices. = Further information = Year of manufacture: 2009 Drive: Wheel Unladen weight: 47,850 kg Payload: 150 kg Gross vehicle weight: 48,000 kg CE marked: Yes Price: On request = Company information = For more information: WhatsApp:

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, More vehicles available. Excerpt from the equipment list below. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design, optimized for loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * Suitable for tractors: 4 x 2, 6 x 2, and 6 x 4 * Detachable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling all hydraulic functions except hydraulic winches * Gooseneck outer rail with mounting holes for screwable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at rear part of gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish Hnsdsxarmaopfx Aaijl * Approx. 40 mm hardwood floor covering on gooseneck, checker plate covering over kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retention spring hanging on the outer rails of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, length approx. 8,800 mm with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical lock bolt and reinforced locking positions; supply lines routed securely inside the extendable rails, automatically adapting to the current platform length * BPW axles and suspension; 1st axle steerable, all others force-steered via hydro-mechanics * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting/lowering valve * 235/75 R 17.5 3PMSF twin tires – brand at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load 50,000 kg * Full-length hardwood floor, interrupted between axles, approx. 50 mm thick (increases slip resistance). – Long slots for removable and repositionable bridging elements * At the front of the platform – 1 movable intermediate table, approx. 300 mm wide, for the large-cross-section sliding tube, with checker plate covering. – Front and rear with long slots for removable and repositionable bridging elements * 1 pair of lashing rings on front cross member (LC 10,000 daN) * 7 pairs of flush-mounted, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extendable (galvanized) widened sections, approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering operable from front and rear via cable remote control, with single-track control of axles, without installation on the tractor * TPMS tire pressure monitoring sensors fitted to all wheels * Deck locking with conically welded locking profiles every 500 mm * Lock monitoring left and right on the trailer * Mechanical lock for intermediate table (approx. 300 mm wide) to secure the table when extended * 5 pairs of threaded blocks mounted on the extendable rail for the installation of M20 screw-in rings (LC 5,000 daN) BRAKING SYSTEM

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drive: Wheel Unladen weight: 48,000 kg Lifting capacity: 220,000 kg Serial number: 82609 Front tire condition: 90% Rear tire condition: 90% Hjdpfowk T Ucsx Aaisnl Transport dimensions (L x W x H): 15.3 x 3 x 4 m Contact PFEIFER GROUP for further information.