All-terrain crane

Demag AC220-5 Dutch Registration, 10x6x10, 220t Capacity

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Axles and tires: -"PENDEL-AXLE", all axles with hydromechanical forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with stopcocks and locking pin for securing in raised position -Technical axle load: 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 / 3PMSF tires Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket Djdpfsh Hm Thox Aaxscg -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: new, power: 367.75 kW (500.00 HP), axle configuration: 8x4, emission class: euro6, Year of construction: 2025, Brand new Iveco T-WAY 500 8x4 truck, 500 hp, Euro 6 TX-12 M automatic transmission Air conditioning, electric windows, radio Integrated safety system Rear-view camera, blind spot camera, radar Sun visor, reverse warning alarm Rear suspension: 13-leaf springs – Front: 3-leaf springs Tyres: 13 R 22.5 Dedpfx Asww I Nheaxocg Tecnokar-S 5 EVO rear tipper body 6 mm floor, 4 mm side walls Hydraulic, tilting rear gate Detachable platform extension, vibrator pre-equipment Front-mounted hydraulic cylinder Electric tarp Marcolin Toolbox, single rubber mudguards Handwash tank + soap holder Manually operated underrun protection bar

Condition: new, machine/vehicle number: 3, empty load weight: 9,500 kg, maximum load weight: 29,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 850 mm, suspension: air, tire size: 245.70 r 17.5, color: white, Year of construction: 2022, Equipment: ABS, factory new ceylan trailer semi-trailers ready for delivery, electro hydraulic double ramps, wideners, rud hooks, 10m platform, h from ground 85cm, also grated ramps, ebs, 3 axles with 1st liftable and 3rd steer-guarantee -CONCESSIONARY INTERDRIVE SRL-PARMA Dedpfohzaq Rsx Aaxocg

Condition: used, mileage: 212,000 km, first registration: 04/2025, fuel type: diesel, axle configuration: 4x2, color: white, Equipment: ABS, air conditioning, Vehicle ready for immediate delivery. IVECO ML 120E19 – Euro 6 with new tipper body: - First registration: 2016 - 190 HP engine – Euro 6 - Approx. 212,000 km - Wheelbase: 3105 mm - GVW: 11,990 kg Features: - Air conditioning, electric windows, electrically adjustable mirrors, ABS, air-suspended driver's seat, fog lights, headlight height adjustment, cruise control, central locking. Fitted with new tipper body: Dcjdpfx Aajwbvc Rjxeg - New three-way tipper body, internal dimensions 4.25 x 2.34 m, 50 cm high side panels split with central stanchion, front cab protection rack. The vehicle can be viewed and tested at: PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Ind. Zone) 37067 Valeggio sul Mincio (Verona) Tel. +39 045-7950955. Please contact us to schedule an appointment so we can organize access to our facility in the best possible way. For more information, technical details, and to request the vehicle sale price, please contact our sales managers directly at +39 045-7950955. Note: The vehicle description is intended as a guideline only and may contain errors or inaccuracies. Prospective buyers are responsible for verifying the exact specifications of the vehicle before making a purchase. Psl Autocarri Srl accepts no responsibility for any errors or discrepancies in this vehicle description. Please note: WE ONLY RESPOND TO INQUIRIES THAT INCLUDE THE REQUESTER'S NAME AND TELEPHONE NUMBER.

Condition: excellent (used), mileage: 70,972 km, first registration: 10/2017, fuel type: diesel, axle configuration: 10x4, wheelbase: 4,300 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: beige, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Leaf suspension - Brake booster - High beam headlights - Low-noise - Speed limiter - LED lights - Air suspension - Air horn - Particulate filter - Sun visor - Stability control - Power take-off (PTO) - Central lubrication system = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 22,680 kg Transmission Transmission: I-SHIFT, automatic Axle Configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Double tires Rear axle 2: Double tires Rear axle 3: Double tires; lift axle; steered Functional Body manufacturer: KH-KIPPER W1MV Tipping body: Rear tipper Condition Technical condition: very good Visual condition: very good Financial Information Price: On request VOLVO FMX 540 10X4 HEAVY DUTY TIPPER EURO 6 L PACKAGE 540 HP TRACTION 10X4 LAST AXLE LIFTED AND STEERED Dcsdpouxwcfefx Aaxjg WHEELBASE 430 CM HUB REDUCTION AXLE LEAF SUSPENDED I-SHIFT AUTOMATIC TRANSMISSION WITH CREEPER GEAR VEB+ FMX CAB WITH AIR CONDITIONING HEATING CAMERA NAVI EU APPROVAL KH-KIPPER TYPE: M1MV LOADING VOLUME 27 M3 HYDRAULIC REAR TAILGATE TIPPER BODY MADE OF HARDOX STEEL HYDRAULIC OIL COOLER CENTRAL LUBRICATION SYSTEM TECHNICAL GROSS WEIGHT 68,000 KG CE CERTIFIED FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the length of the loading area, length approx. 3,750 mm, with a bevel at the rear of approx. 850 mm x 10° -Can be raised and lowered hydraulically, stroke +- 250 mm including hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For tractor units: 6 x 4 and 8 x 4 Loading area: -Loading area in extendable design, length approx. 11,000 mm with a bevel at the rear of approx. 500 mm x 10°. -A recess in the loading area and in the bevel to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm -Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically foldable ramp tips. -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -25 mm "Super Grip" rubber floor and approx. 5 mm sheet metal floor as additional reinforcement on the slope of the loading area -20x30 mm square climbing rails, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steered -The steering behavior of the first two axles can be optimally adjusted to the length of the loading area both mechanically and hydraulically. -Hose rupture valve on the axle compensation cylinder with automatic RESET function. -Hydraulic cylinder with shut-off valves and pins for securing in the raised position. -245/70 R 17.5 3PMSF Accessories included: -Steel bulkhead, pluggable, approx. 400 mm high -Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile -1 spare wheel -Outer support of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screwable lashing rings included -Checker plate covering above the gooseneck -On the gooseneck 1 pair of pluggable aluminum side walls on the side, approx. 400 mm high, anodized -On the gooseneck a pluggable aluminum rear wall, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -4 Brake shoes -4 axle load gauges -Mechanical downpipe supports at the front -1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm -Mechanical downpipe supports at the front -Continuous sheet metal covering on the loading area with a painted layer of sand to prevent slipping -1 intermediate table, approx. 500 mm wide, for the pull-out, with long holes for hanging and movable bridging elements -Painted sand coating on the support surfaces of the intermediate table -Mechanical locking for locking the intermediate table to the pull-out -8 pairs of stake pockets in the outer frame -Extensions (galvanized) extendable by approx. 230 mm per side -1 pair of hydraulic. Rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electro-hydraulic unit -Widening planks, loose, in reinforced steel U-frame -Radio and cable remote control -4 warning signs, approx. 423 x 423 mm Dcsdok Af Svjpfx Aaxsg

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm Dsdpfx Aajrgzv Njxscg LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: excellent (used), mileage: 409,294 km, first registration: 08/2014, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 600 l, brakes: engine braking, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2014, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, power mirror, soot filter, spoiler, = Further Options and Accessories = - Power brake booster - Roof spoiler - Low noise emission - Speed limiter - Air suspension - Air horn - Particulate filter - Sleeper cab - Sun visor - Stability control - Auxiliary heater (parking heater) - Power take-off (PTO) = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 10,300 kg Transmission Transmission: I-SHIFT, automatic Dcsdpfx Ajuxvx Ejaxsg Axle Configuration Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires Condition Technical condition: very good Visual condition: very good Financial Information Price: On request VOLVO FH 500 6X4 Tractor Unit EURO 6 L PACKAGE 500 HP DRIVE 6X4 PLANETARY AXLE AIR SUSPENSION WHEELBASE 320 CM FH GLOBETROTTER CAB OPTIONS: - AIR CONDITIONING (CLIMA) - NAVIGATION SYSTEM - REFRIGERATOR - MICROWAVE OVEN I-SHIFT AUTOMATED TRANSMISSION ALUMINIUM FLOOR LED HYDRAULIC CONNECTIONS LARGE DIESEL TANK 600 LITERS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: new, functionality: fully functional, power: 389.81 kW (529.99 HP), fuel type: diesel, overall weight: 40,000 kg, tire size: 13R22,5, axle configuration: 8x4, brakes: VEB, color: white, gearing type: automatic, Year of construction: 2025, operation weight: 40,000 kg, shovel volume: 20 m³, DOMINATOR rear tipper with 7 mm HARDOX 500 floor, 5 mm sides, double-acting hydraulic rear tailgate, Marcolin electric tarpaulin, pneumatically operated rear underrun bar, vibrator, sprayer, painted grey with black corner fittings. Dcjdpfxexrdr Ej Aaxjg

Condition: used, mileage: 129,252 km, lifting height: 38,000 mm, Year of construction: 2015, Drive: Wheel Unladen weight: 27,875 kg Lifting capacity: 23,800 kg Dcodpfxsw A Hb Tj Aaxeg Serial number: 122024 Front tyre condition: 70 Rear tyre condition: 70 Transport dimensions (L x W x H): 11.1 x 2.55 x 3.9 Please contact PFEIFER GROUP for further information.