Roll-off tipper truck

alga AB, 22m³, Container, Türen,sofort verfügbar

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Hedegcw Rmspfx Ab Uji Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: used, maximum load weight: 28,240 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2013, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 50 m³, Year of construction: 2013, Equipment: ABS, Air, lift, MB disc, EBS, aluminum rims, fall supports, lean-to ladder, PVC half-shell mudguard, UFS foldable, trough made of HB 450 floor 4mm, side walls 3.2mm thick, rear wall 1/2 + 1/2, ladder and walkway, roof frame, loading pressure gauge, 2xWZK, roll-up tarpaulin with central locking Hedsuwhrujpfx Ab Uei

Condition: used, mileage: 351,885 km, power: 294 kW (399.73 HP), first registration: 12/1996, fuel type: diesel, empty load weight: 11,800 kg, maximum load weight: 14,200 kg, overall weight: 26,000 kg, tire size: 315 / 80 R 22,5, axle configuration: 6x2, wheelbase: 4,200 mm, brakes: constant throttle, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: air, number of seats: 2, total length: 2,500 mm, total width: 3,250 mm, Equipment: ABS, cabin, trailer coupling, Vehicle location: Bovenden, Kz. house, 1x air seat, rear window, electric mirror, heated mirror, electric window left, electric window right, sun visor, switch 16, ABS (anti-lock braking system), constant throttle, air suspension, tow bar air-light-hydr., environmental badge red Wheelbase: 4200 mm Body: Marrel hook MA 26.70 for 6.5 m container VA wheels 385 / 65 R 22.5, 6-cylinder turbo engine!!! converted to 6x2 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hjdpfxjvhg Ryo Ab Uoi - .

Condition: used, empty load weight: 5,600 kg, maximum load weight: 25,900 kg, overall weight: 31,500 kg, axle configuration: 2 axles, first registration: 10/1993, loading space length: 6,800 mm, loading space width: 2,340 mm, loading space height: 1,200 mm, loading space volume: 19 m³, total length: 2,500 mm, total width: 3,100 mm, suspension: air, tire size: 385 / 65 R 22,5, color: grey, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, aluminum body, 2-axle, BPW axles, air-sprung, roller tarpaulin, catwalk, flap, folding U-protection, chute Body: Aluminum box body approx. 19m³ ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Hedpfxevhhm Ao Ab Usi

Condition: used, maximum load weight: 32,400 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2021, loading space length: 13,110 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, loading space volume: 86 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2021, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 86 m³ First registration 09/2021 Accident trailer, towable Internal dimensions (LxWxH): 13,110 x 2,350/2,450 x 2,770 mm (tapered design) Unladen weight: 9,640 kg Floor made entirely of 5 mm Hardox HB450 steel Front wall and side walls made of 3 mm Hardox HB450 steel Pneumatically folding rear underrun protection Straight front wall with internal access ladder Hjdpfxox E Ixrj Ab Usi Rear portal doors 50:50, pneumatic remote unlocking Reinforced sliding roof tarp HYVA tipping cylinder Type Alpha, low-pressure 2x pneumatic vibrator JOST crank landing gears, full load SAF axles with large disc brakes, 430 mm 1st axle is a lift axle WABCO trailer EBS with roll stability support RSS WABCO Smartboard Raising and lowering device Automatic tipping height lowering Tyres: 6 x 385/55 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holders Toolbox on the left 4x LED reversing spotlights RENTING is the new BUYING – immediate full-service rental available

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength? Aggregate chassis made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering? Wabco Smartboard? electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment)? 1st + 3rd axle separately liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Hsdpegcw Riefx Ab Uji Tires and wheels 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel + approx. 120 kg) Seatposts Aluminum drop supports, Made of aluminum alloy, 2 - 10 tonne support load, we use swivel feet for air suspension Brake system according to E.E.G. standard, dual-line braking system, EBS E - system Wabco with RSS system (roll stability support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical system according to the STVZO guidelines with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear end, 24 volt system with lx 15-pin and 2x 7-pin socket, with side contour lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the seat supports, 1 LED work light inside at the front left can be operated from the outside Structure/trough "structure fully welded inside" Front wall load 17,250 dkn? Rear and side walls 10,250/13,400 dkn aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside ! ! , floor as moving floor system laid on 140 mm aluminum cross beams, floor stacker load approx. 7 ton/m2 cross beams mounted accordingly closely (approx. 350mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design smooth rear wall in straight design with 2 aluminum wing doors 50/30mm thick with 4 rotating rod locks in the welded aluminum rear frame fixed in Teflon bearing and stainless steel bearing. ,running aluminum wall suspended in the reinforced aluminum top belt with "Kevlar tarpaulin" for complete emptying, side brush seal and additional Kevlar tarpaulin on the side, integrated discharge funnel with folding cover plate in the floor closure, operable from the outside on the left at the back, viewing window on the left at the back, 1 test slider in each of the rear doors, so 2 pieces, service door on the left in the front wall Hydraulic system "Cargo Floor" 24 board system - smooth design! Push floor system in the floor with hydraulically moved aluminum profiles mounted on aluminum square profiles with approx. 880 PE-HD sliders, approx. 8mm floor thickness, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, power supply at the rear left with cable operation in a lockable waterproof box, without hydraulic hoses Accessories PVC mudguard with rubber mud flaps, aluminum spare wheel holder, side

Condition: used, Year of construction: 2012, operating hours: 17,383 h, Serial number: 825.0.1916 Hodpfx Aborqb Dfs Uoi Magnetic system Operating hours: 17,383 MAXCAB - CABIN TELESCOPIC - RAISABLE Automatic climate control Rear and side monitoring with camera Outrigger support front + rear Central lubrication system Bucket handle: 4,850 mm Tires: 10.00 - Changes, prior sale and errors are expressly reserved. The description serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The description according to the purchase contract is decisive. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply.

Condition: used, maximum load weight: 25,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2019, next inspection (TÜV): 07/2025, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, Schmitz Cargobull Gotha SKI 24 SL 9.6, first owner, German vehicle, 51 m³, steel, new sliding tarpaulin, TÜV valid until 07/25. Optionally available with a suitable tractor unit MAN 18.510, new model, year 2020, from maintenance contract, new turbo engine from MAN, overhauled, mileage 490,000 km, can be purchased additionally for €44,780.00 net. Hsdpstqrawjfx Ab Uei Sale only to dealers and commercial customers. No liability for typographical or listing errors. All information subject to change. Prior sale reserved.

Condition: used, empty load weight: 5,220 kg, maximum load weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2018, total length: 7,880 mm, suspension: air, load capacity: 33,780 kg, • 1st axle liftable • Pneumatic braking system (BAE) • Universal door • 2 hatches • Pneumatic unlocking • Aluminium rims • CRAMARO electric tarpaulin • Towing eye • Volume: 27 m3 • Internal dimensions: 7.88 x 2.42 x 1.42 m Hedpfx Abex Hkyhs Usi

Condition: used, mileage: 406,578 km, power: 100 kW (135.96 HP), first registration: 11/1997, fuel type: diesel, fuel: diesel, color: blue, gearing type: mechanical, emission class: euro2, number of seats: 2, total width: 2,500 mm, loading space volume: 8 m³, loading space length: 4,500 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 1997, Equipment: ABS, EBS, crane, trailer coupling, Engine capacity: 4.249 cc GVW: 7.490 kg Hedpfx Abext Tnfo Uji Crane: Palfinger Selling price: € 12.000, US$ 14.120 Technical inspection expiration date: 2023