Semi low-loader

Dinkel DTSAV 28000 trailer

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings Nsdpfx Aohlz R Sjcueli -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: excellent (used), mileage: 104,000 km, power: 368 kW (500.34 HP), first registration: 07/2019, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2019, operating hours: 2,630 h, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fridge, navigation system, parking heater, retarder, = Additional Options and Accessories = - Aluminum fuel tank - Electrically adjustable exterior mirrors - Low noise - Speed limiter - Intarder - Air suspension - Air horn - Sun visor - Auxiliary heater - Toolbox - Xenon lighting - PTO (power take-off) - Central lubrication = Further Information = Axle Configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Suspension: Air suspension Rear axle 2: Twin tires; lift axle; suspension: Air suspension Weights Nsdpfx Acjv Tmyleueli Unladen weight: 25,475 kg Payload: 13,525 kg Gross vehicle weight: 39,000 kg Functionality Crane: HMF 9520-K7 + JIB FJ 2200-6, year of manufacture 2019, mounted behind the cab Body manufacturer: HMF 9520-K7 + JIB FJ 2200-6 CE marking: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request

Condition: used, maximum load weight: 26,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2004, Year of construction: 2004, Equipment: ABS, Faymonville ILO-3 3-axle inloader Condition: very good, ready for immediate use Tires: 70-95% Nsdpfxewm Ulzj Acujli

Condition: used, empty load weight: 12,640 kg, maximum load weight: 28,360 kg, overall weight: 41,000 kg, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space length: 9,900 mm, loading space width: 2,550 mm, loading space height: 910 mm, loading space volume: 22 m³, suspension: air, tire size: 235/75 R 17.5, color: other, gearing type: other, front tire size: 235/75 R 17.5, driver cabin: other, emission class: none, Available immediately for rental periods of 4 weeks or more - Contact O. Schinke o. Platform length 3,800 mm, loading length 9,400 mm, loading width 2,550 mm, ramp incline 1,300 mm, Rear loading ramps 2,950 x 1,700 x 900 mm ramp angle approx. 11 degrees, hydraulic ramp jack, ramp hydraulically movable, Njdpfsxwk Evox Acueli Grease aid, smart board, loading bed extension, Spare wheel holder, including spare wheel, storage box, 1 support at the front: telescopic support aluminum leg for uncoupling, 2 foldable support legs at the rear with spring holder, To operate the hydraulic components, a corresponding truck hydraulic system with forward and reverse air is required (not included in delivery) also available as a rental vehicle in the long term! Contact us - we will make you our individual offer.   * ABS * Steering knuckle on the 2nd and 3rd axle * Side impact protection * Rubber-metal pads on the loading ramps * Plastic tool box * Single lift axle * Platform side walls * Hydraulic ramp jack * Hydraulically movable ramps * Spare wheel holder * Rotating beacon * SAF axles * Smart board * Supports * Warning package * Central lubrication system We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. Information about accessories is provided without guarantee, subject to changes, prior sale or errors. We offer and strongly recommend an inspection and test so that the buyer does not have any false ideas about the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   We take care of all formalities and hand over the vehicle with the desired transfer license plates for an additional charge. Some of the images have been edited and are for initial viewing only. If you are interested, please contact us and request current images.

Condition: used, overall weight: 28,500 kg, axle configuration: 1 axle, first registration: 10/2011, next inspection (TÜV): 11/2025, loading space length: 8,190 mm, loading space width: 2,530 mm, * Remote control steering * Hydraulic steering Nodpfxsw Sgdxo Acusli * Removable gooseneck * BPW axles * Unladen weight: 9,280 kg * Main inspection (MOT): 11.2025 * Safety inspection: 05.2026 -----Internal vehicle number: 11269----Errors and prior sale reserved

Condition: refurbished (used), functionality: fully functional, empty load weight: 7,500 kg, overall weight: 36,000 kg, axle configuration: 2 axles, first registration: 05/2006, next inspection (TÜV): 05/2026, loading space length: 11,300 mm, loading space width: 2,550 mm, Year of construction: 2006, Upper edge of high bed: 1550 mm Upper edge of low bed: 950 mm Nedpfxoxvhyne Acuoli Length of high bed: 3750 mm Length of low bed: 7500 mm Telescopic extension: 5000 mm Both axles electro-hydraulically steered via Nato plug

Condition: new, Year of construction: 2025, Equipment: all wheel drive, Hoeflon mini crane C30e - new device 100% electric pick & carry crane Delivery time: available from stock Capacity: 9,000 kg Pick & carry capacity: 3,000 kg Max. lifting height: 14.50 m and including options 22.00 m Max. reach: 12.20 m and including options 20.00 m Dimensions L x W x H: 3.85 m x 1.20 m x 2.00 m Total weight: 8,700 kg Boom arm weight: 750 kg Counterweight weight: 2,350 kg Boom angle: 85 degrees Swivelling: 360 degrees Drive system with remote control 1st gear: 0.75 km/h 2nd gear: 1.5 km/h Tilt angle: 20 Grad Special options included: Fly-Jib Jib9 Cable winch: 6400 kg Nledpfxomrm D Rj Acuei

Condition: used, mileage: 113,839 km, lifting height: 58,100 mm, Year of construction: 2016, Drive: Wheel Empty weight: 49,260 kg Lifting capacity: 7,000 kg Serial number: 597005 Njdpfxjv Rk S Hj Acuoli Front tire condition: 70% Rear tire condition: 70% Transport dimensions (L x W x H): 15.98 x 2.75 x 3.99 m Contact PFEIFER GROUP for further information.

Condition: used, Year of construction: 2021, Used TDK type 81K.1 for sale: - Hoisting gear / slewing gear / trolley travel mechanism with frequency converter (frequency controlled) - Jib length 45m at 1400 kg / or 48m jib length - Two-part rope operation only; max load 6000 kg - Hook height 26m according to data sheet - Lattice mast tower - Stationary on base plates - 14 x counterweights of 2.5 t each Nlodpouu S H Njfx Acuji - Slewing radius 3.50 m - Ballasting device - Ballast tensioning system - HBC radiomatic remote control - ABB (work area limitation) - Wind measurement and wind warning system - Hoisting rope for up to six tower sections - Lighting transformer - Aircraft warning device, 2 x steady lights - Electrical central lubrication system with 1-liter reservoir - LOAD PLUS 81K.1#0033 -- -- -- = Further information = Please contact Jörg Bienek for more information.