Semi low-loader

NOYENS 2 ASSER SEMIE HYDRAULISCH GESTUURD

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: Hsdohlz R Sopfx Acpjn -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: VAVJS1339PH522406, empty load weight: 8,520 kg, maximum load weight: 30,480 kg, overall weight: 39,000 kg, first registration: 01/2024, loading space length: 13,500 mm, suspension: air, tire size: 385/55 R22.5, color: yellow, Year of construction: 2024, Equipment: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE BUILDING MATERIAL FLATBED SEMITRAILER RH230 – forced-steered Vehicle ID No.: VAVJS1339PH522406 Mileage: 7,700 km - Weights Gross weight (technical): 39 t Axle aggregate load (technical): 27 t Fifth wheel load (technical): 12 t DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Overall width max. 2,550 mm Loading height front approx. 230 mm above ASH = approx. 1,360 mm Unladen fifth wheel height approx. 1,130 mm CHASSIS - Welded steel frame construction - Reinforced for 20 t point load over 4 m loading length - Frame height at front approx. 230 mm - 2" interchangeable king pin - Frame for unladen fifth wheel height approx. 1,120 mm – approx. 1,200 mm with air-suspended tractor unit - Outer frame with 4 mm perforated plate, hole center spacing approx. 100 mm, elongated hole 50/30 mm, for lashing of 3.5 t per lashing point - 10 pairs of 5 t lashing rings, recessed in floor, foldable, can also be folded outwards - 8 pairs of square tube sockets with plug-in mounting for square tube stanchions 80x80 mm, both sides of outer frame - 6 square tube sockets with plug-in mounts for 80x80 mm square tube stanchions, positioned transversely across the full width, max. pulling force 2,000 daN AXLES - BPW EcoDisc axles with disc brakes Ø430 mm (22.5" disc) - Load capacity 9 t/axle, on-road version Hjdexq S H Iepfx Acpen - 1st axle fixed - 2nd and 3rd axles fitted with turntable installation for forced steering STEERING - Forced steering "Tridec TR" on two turntable-guided axles, for heavy-duty applications - Automatic forced steering, front fifth wheel plate with steering wedge - Power transmitted via two steering rods, rear axles with turntable installation - Central lubrication points for steering at the front fifth wheel plate and rear turntable - Axle lift on 1st axle, lifts and lowers automatically depending on weight, start-up aid with speed limitation BRAKING SYSTEM / SUSPENSION - EBS system 2S2M, one axle sensored - RSS/RSP – stability program - Spring-actuated parking brake on 2 axles - Aluminium air tanks - Brake/air connectors with Quattromatic quick coupling - EBS/ABS socket at the front - Air suspension with lift/lower function, total travel approx. 200 mm - Automatic adjustment to programmed driving level above 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for in-cab display - Wabco SmartBoard for data reading via display (mileage, axle aggregate load, brake diagnostics, etc.) FLOOR - Phenolic plywood floor 27 mm with steel hat profile rails over longitudinal beams - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminium forklift guard strip bolted on both sides of outer frame - Aluminium forklift guard strip screwed transversely at rear - Enclosed SPECIAL steel toolbox by Schoch, black coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, load capacity approx. 1 t, asymmetrical with doors on both sides - Galvanized steel toolbox / Monochrome painted lid - 8 removable hardwood crossbeams approx. 100/100 mm with steel edging, fixable in plug-in sockets in outer frame Very good condition, German registration documents, immediately available.

Condition: excellent (used), axle configuration: > 3 axles, first registration: 08/1994, color: yellow, Year of construction: 1994, Equipment: ABS, = Further options and accessories = - Air suspension = Additional information = Axle configuration Rear axle 1: Twin tires Hodouxy Dfepfx Acpen Rear axle 2: Twin tires Rear axle 3: Twin tires; Steering Rear axle 4: Twin tires; Steering Weights Unladen weight: 11,420 kg Functional Loading platform height: 77 cm Extendable body: Yes Condition Technical condition: Very good Optical condition: Very good Financial information Price: On request NOOTEBOOM OSD-50-04-V SEMI LOW LOADER 4x SAF axles 2x steering axles (trailing) Air suspension Tyre size 205/65/R17.5 Extendable loading platform Length 923 cm + 670 cm extendable, total loading platform length 1593 cm Width of loading platform 275 cm + 2 x 27.5 cm side extension, total platform width 330 cm Height of loading platform approx. 77 cm when loaded Gooseneck length 388 cm Lashing eyes and stake pockets 2x rear supports FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Condition: excellent (used), axle configuration: 2 axles, first registration: 09/2018, color: red, Year of construction: 2018, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Rear axle 1: Twin tires Rear axle 2: Twin tires; Steered Unladen weight: 8,940 kg Loading platform height: 90 cm Extendable body: Yes Technical condition: Very good Optical condition: Very good Price: On request DANSON HLB45 2-AXLE EXTENDABLE SEMI LOWLOADER 2x SAF axles 1x steering axle (trailing) Tire size: 245/70/R17.5 Extendable loading platform Length: 740 cm + 500 cm extendable, total platform length 1240 cm Platform width: 255 cm + 2x 102.5 cm extendable, total platform width 460 cm!!! Platform height: ± 90 cm Gooseneck length: 40 cm Hjdpfxoux Ad Us Acpon Hook eyes, lashing pots, twistlocks Follow us on Instagram: GEURTSTRUCKS We speak German Hablamos Español We speak English

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, first registration: 10/2016, loading space length: 90,000 mm, loading space width: 2,550 mm, loading space height: 850 mm, total length: 12,400 mm, total width: 2,550 mm, total height: 850 mm, suspension: hydraulics, tire size: 245/70/17.5, color: red, Year of construction: 2016, Equipment: ABS, Axle configuration Tyre size: 245/70/17.5 Brakes: Drum brakes Suspension: Hydraulic suspension Rear axle 1: Twin tyres; Max. axle load: 12,000 kg; Steerable Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steerable Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; Steerable Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; Steerable Weights Unladen weight: 14,200 kg Payload: 39,800 kg Gross vehicle weight (GVW): 54,000 kg Functional Loading platform height: 85 cm Extendable body: Yes Condition Technical condition: Very good Visual condition: Very good SCHEUERLE EUROAXLE 1T4 4-AXLE SINGLE-TELESCOPIC SEMI LOW-LOADER 4 x Hydraulically suspended axles 4 x Hydraulically steered axles 12,000 kg per axle Technically permissible gross weight: 66,000 kg Electro-hydraulic steering assistance system Remote control Hodpev S U R Njfx Acpen Tyre size: 245/70 R17.5 Extendable to 620 cm Loading platform length: 900 cm + 620 cm extension (extendable up to 1,520 cm) Loading platform width: 255 cm + 2 x 22.5 cm extensions, total loading width 300 cm Loading platform height: 85 cm Lashing rings and round recesses

Condition: used, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2017, * SAF axles * Wheel recesses * Hydraulic loading ramps, width adjustable * Air suspension * Extendable * Unladen weight: 11,020 kg Hodpewta Alefx Acpen -----Internal vehicle number: 11010----Subject to errors and prior sale. WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. WhatsApp: German, English -- WhatsApp: German, English, Arabic

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 06/2018, loading space length: 7,000 mm, loading space width: 2,550 mm, total length: 11,000 mm, total width: 2,550 mm, suspension: air, tire size: 265/70/19.5, color: blue, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - Lift axle - Air suspension = Further Information = Axle configuration Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre size: 265/70/19.5; twin tyres; lift axle; max. axle load: 10,000 kg; steered Rear axle 2: Tyre size: 265/70/19.5; twin tyres; max. axle load: 10,000 kg; steered Rear axle 3: Tyre size: 165/70/19.5; twin tyres; max. axle load: 10,000 kg; steered Hedpfx Acjwifrdepsn Weights Unladen weight: 12,000 kg Payload: 36,000 kg Gross vehicle weight: 48,000 kg Functional Loading platform height: 95 cm Condition Technical condition: very good Visual condition: very good EMTECH 3-AXLE LOWBED TRAILER SAF AXLES TRIDEC STEERING SYSTEM AIR-SUSPENDED, STEERED 1 AXLE IS LIFT AXLE 10,000 KG PER AXLE TECHNICALLY PERMISSIBLE GROSS WEIGHT 48,000 KG TYRE SIZE 265/70 R19.5 LOADING PLATFORM LENGTH 700 CM EXTENDABLE 515 CM LOADING PLATFORM WIDTH 255 CM LOADING PLATFORM HEIGHT +/- 95 CM LASHING EYES AND STAKE POCKETS

Condition: used, maximum load weight: 24,500 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/1995, Year of construction: 1995, Equipment: ABS, BABELSBERGER SSA 51 SAF AXLE BALLAST 14 TIRE SETS 1ST HAND? ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT * TYPE: SSA 51 / 124/1 * BALLAST TRAILER * 3 AXLES * DRUM BRAKES * AIR SUSPENSION * 14 TIRE SETS * LOAD SECURING LASHING POINTS * TIRE SIZE: 445 / 65 R 22.5 * PERMISSIBLE TOTAL WEIGHT: 34,000 KG * UNLADEN WEIGHT: 9,500 KG * PAYLOAD: 24,500 KG * IMMEDIATELY READY FOR USE * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ ----EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS REGISTRATION, AND 17 - 21 DAYS AUSTRIA REGISTRATION EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Subject to changes, errors and prior sale! You can find more vehicles on our website: Sales are made exclusively according to our general terms and conditions – see website. Hjdpotvt A Tjfx Acpen Important note – important information: Despite careful checking of all details in our offer, it may happen that errors occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: new, empty load weight: 9,300 kg, maximum load weight: 38,700 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,200 mm, suspension: air, tire size: 385/65 R 22,5, color: grey-black, Equipment: ABS, Cargo bed: - Load surface in extendable design with pneumatically operated locking mechanism - Loading area with approx. 30 mm thick wooden floor - 7 pairs of lashing rings can be folded outwards (LC 5,000 daN) - 3 pairs of lashing rings can be folded outwards (LC 10,000 daN) - Cut-outs in the outer frame of the cargo bed for attaching lashing straps. (LC 2,000 daN) Axles and tires: - BPW axles and suspension, all axles with hydro-mechanical forced steering - With disk brakes - Technical axle load: 10,000 kg - Air suspension with lifting and lowering valve - Axle tool - Tires: 385/65 R 22.5 Hjdpfx Aeiu Etrjcpen - TPMS tire pressure monitoring system in accordance with ECE R 141 Brake system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Electrical system: - Electrical system in accordance with EU regulations, 24 volt ASPÖCK-NORDIK lighting (ASS3) - ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets - Connection according to ISO - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Re-steering can be operated from the front and rear by cable remote control via pushbuttons, with toe-in control of the axles - 4 wheel chocks with holder on the front wall - 2" kingpin - One galvanized steel bulkhead approx. 1,600 mm high - Yellow-red air couplings on the galvanized connection strip at the front - White reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer in red - European reflector plates (red/yellow) at the rear of the trailer - A mud flap at the rear of the trailer - Manual and description - A bracket for a rotating beacon at the rear of the trailer - Loading area with approx. 30 mm thick wooden floor edged in omega profiles - 10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed - 1 spare wheel holder under the cargo bed on the right in the direction of travel - Electro-hydraulic unit - On the gooseneck and on the rear panel on the left and right, one holder each for the warning signs including socket - A layer of sand painted onto the central beam to prevent slipping - 6 pairs of WADER container pockets in the loading area, for 1x20ft, 2x 20ft or 1x 40ft container, an additional locking point is provided in the pull-out for a 45ft container - 4 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions - Access ladder mounted on the right in the direction of travel - One HDPE tool box approx. 1,200 x 500 x 480 mm at the front under the cargo bed on the left in the direction of travel - Central lubrication system BEKAMAX (Pico) with removable protection around the pump - Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status - Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control - Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm with a position light - A holder for rotating beacon on the warning signs - Speed sticker 80 km/h at the rear and on both sides - Load manometer to determine the axle loads including load diagram - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2009, total width: 2,550 mm, color: black, Year of construction: 2009, Axle configuration Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 14,940 kg Payload: 41,160 kg Gross vehicle weight (GVW): 56,100 kg Functional features Extendable structure: Yes Maintenance, history and condition APK (main technical inspection): New TÜV upon delivery Technical condition: very good Visual condition: very good Identification Registration: ON-27-VZ BROSHUIS ABSD 2x telescopic low-bed trailer 3 hydraulically steered axles Permissible gross weight 56,100 kg Electro-hydraulic steering assistance Remote control Two extendable loading platforms (640 cm + 620 cm), total loading platform length 13,080 cm + 640 cm + 620 cm Loading platform width 253 cm + 2 x 22.5 cm extensions, total loading platform width 300 cm Loading platform height 95 cm Lashing rings Hsdpfxjymn H Rj Acpon