Low loader semitrailer

Möslein ST 3 Plato 8,7 3 Achs Satteltieflader Plato 45 t GGfür Fertigteile, Baumaschinen

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear Knsdjh Hm Thjpfx Agmod -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Axles and tires: -"PENDEL-AXLE", all axles with hydromechanical forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with stopcocks and locking pin for securing in raised position -Technical axle load: 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 / 3PMSF tires Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long * Rear with chamfer approx. 1,000 mm x 10°, for tractors: 4 x 2, 6 x 2, and 6 x 4 * Front wall made of steel, removable, approx. 400 mm high * ASPÖCK-UNIBOX on the front connection panel with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * Outer beams on the gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of recessed lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm hardwood flooring over the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide Knedpfx Agsxc Axrsmed * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 1 pair of stakesockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) Loading platform * Extendable loading platform, approx. 8,800 mm long with chamfer at the rear approx. 500 mm x 10° * Recess in the platform including the chamfer for receiving the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood flooring approx. 50 mm thick on the loading platform, interrupted only between the axles * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Platform locking with conically welded securing profiles at approx. every 250 mm * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed, outward-folding lashing rings in the outer frame of the loading area (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axle * Aluminium covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, also serving as extension planks * Hardwood flooring on the loading platform chamfer * Painted-on sand coating on the outer frame of the loading area as well as on the chequered plates of the platform Chassis * BPW axles and suspension * 1st and 2nd axle rigid * 3rd axle self-steering * 3rd axle with electro-magnetic reverse lockout, activated via reverse gear and manually * Air suspension with lift and lower valve * 1st axle with start-up aid * 2 axle load gauges mounted on the left side, including axle load diagram Tyres * 235/75 R 17.5 3PMSF twin tyre configuration * TPMS tyre pressure monitoring system in accordance with ECE R 141 Lighting * 1 LED work light each on the left and right in front of the axles, wired to the tractor unit Loading ramps * Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M, a pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide * Hardwood covering * Hydraulically foldable ramp tips * Ramps can be moved individually hydraulically approx. 235 mm outward and approx. 215 mm inward * Hardwood covering on the platform chamfer * Ramp with hardwood covering Brake system WABCO EBS-E according to EU regulations Lighting system * 24-volt lighting system * ASPÖCK-NORDIK full LED

Condition: used, mileage: 117,555 km, power: 350 kW (475.87 HP), first registration: 05/2009, overall weight: 32,000 kg, fuel type: diesel, color: silver, axle configuration: > 3 axles, emission class: euro5, Year of construction: 2008, Equipment: ABS, air conditioning, crane, parking heater, Special equipment: Trailer brake 2-line, trailer coupling: G 150, trailer socket 24V / 15-pin, audio system: CD radio (Bluetooth), 220 Ah battery, aluminum air reservoir, air horn, cab: movable cab entry, cab: comfort suspension (1.8 Hz), 100 A alternator, noise reduction measure 80 dB(A), graphic info display with eco meter, automatic climate control, light and rain sensor, 2-cylinder air compressor, high-performance belt-driven fan, illuminated Mercedes star, MB 2C PTO, programmable special module, rotating beacon left/right, circuit breaker, cab seats: comfort driver's suspension seat with horizontal suspension, sun visor, side window sun blinds, driver and passenger door, 24V cab socket, impact protection grille, steel front bumper, automatic daytime running lights, cross member for trailer coupling, reverse warning buzzer, additional heat insulation, auxiliary air heater, transmission oil cooler Additional features: Kedpfx Ajwz Du Ijgmsnd 2nd steered front axle, emission standard EURO 5, axle configuration: 8x8/4, front axle load 9.0 t, trailer coupling: towing hitch, vertical exhaust silencer behind cab, electrically adjustable and heated exterior mirrors, steel roof hatch, rear axle differential lock, front axle differential lock, cab: M (medium length), suspension: leaf/leaf, electric windows, 16-speed gearbox, rear axle H 7, 13 t, ring gear 300, hydraulic pump (Meiller pump – 6 pistons), body/chassis: chassis for tipper (additional body), body/chassis: tipper, fuel tank: 300 liters, model update from 06/2008, engine 12.0 L – 350 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4800 mm, rear window, voltage converter 24V/12V 8A, steel rims 9.00x22.5, Telligent shift system, Telligent brake system with ABS, drum brakes front and rear axle, transfer case with differential lock, CB radio pre-installation, preparation for phone/fax, immobilizer, heat-insulating glazing, central locking with keys, gross vehicle weight 41.00 t Errors and prior sale reserved Viewing only by appointment WhatsApp inquiries will not be answered

Condition: good (used), mileage: 144,539 km, power: 353 kW (479.95 HP), first registration: 11/2011, fuel type: diesel, axle configuration: 8x4, tire size: 385/65 22.5, fuel: diesel, wheelbase: 5,400 mm, brakes: retarder, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, Year of construction: 2011, Equipment: ABS, air conditioning, cruise control, retarder, = Additional Options and Accessories = - 40 mm trailer coupling - AP axles - Leaf spring suspension front and rear - Flashing lights - Camera with monitor - Roof hatch - EBS (Electronic Braking System) - Electric windows - Euro 5 - Radio/CD player - Reversing camera - Sun visor - Toolbox - PTO (Power Take-Off) = Remarks = - Very nice Actros 4148 with Falkom recovery body, equipped with WSK fluid coupling! - Vehicle has German registration! - Recovery vehicle Falkom (Type: FAW 25000), 25 tonnes - 1x hydraulically extendable - Extendable light mast - Radio remote control - Slide lift (Type: Low-Rider) - Tow bar (Type: L-Arm) - Including all mounting equipment for recovering various brands of trucks, buses, and similar vehicles - Rotzler winch (Type: HZ 90) - Maximum lifting capacity: 10,000 kg - Rotzler winch (Type: HZ 200) - Maximum lifting capacity: 25,000 kg - Multiple toolboxes - 9-tonne front axles! - Fully leaf-sprung! - Only 144,539 km! - In very well-maintained condition! = Further Information = General Information Number of doors: 2 Axle Configuration Axle make: Anders Suspension: Leaf spring suspension Front axle 1: Tire size: 385/65 22.5; Max. axle load: 9,000 kg; Steering axle; Left tire tread: 60%; Right tire tread: 60% Front axle 2: Tire size: 385/65 22.5; Max. axle load: 9,000 kg; Steering axle; Left tire tread: 60%; Right tire tread: 60% Rear axle 1: Tire size: 315/80 22.5; Dual wheels; Max. axle load: 9,500 kg; Left inner tread: 80%; Left outer tread: 80%; Right inner tread: 80%; Right outer tread: 80%; Hub reduction: Outboard planetary axles Rear axle 2: Tire size: 315/80 22.5; Dual wheels; Max. axle load: 9,500 kg; Left inner tread: 70%; Left outer tread: 70%; Right inner tread: 70%; Right outer tread: 70%; Hub reduction: Outboard planetary axles Dimensions Dimensions (L x W x H): 990 x 255 x 390 cm Knedpfx Aoxt Euwegmod Weights Unladen weight: 27,450 kg Payload: 7,550 kg Gross vehicle weight: 35,000 kg Interior Number of seats: 6 Condition Technical condition: good Optical condition: good Product Safety Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL

Condition: good (used), mileage: 489,459 km, power: 316 kW (429.64 HP), first registration: 04/2002, fuel type: diesel, axle configuration: 8x4, tire size: 385/65 22.5, fuel: diesel, wheelbase: 5,700 mm, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2002, Equipment: ABS, air conditioning, differential lock, parking heater, = Additional options and accessories = - 50 mm tow hitch - AP axles - Leaf springs front and rear - Flashing lights - Roof hatch - EBS (Electronic Braking System) - Electric windows - Remote control - Heating - Refrigerator - Center armrest - Radio/CD player - Reversing camera - Sun visor - Toolbox - PTO (Power Take-Off) = Notes = - Ideal for the recovery of buses and heavy vehicles - Recovery vehicle JIGE (type Euro Tow 42). Knsdjxvch Hopfx Agmsd - 3 x extendable fork: - Load capacity retracted: 30,000 kg - Load capacity extended: 10,000 kg - Hydraulic winch DP (type 20BBX4L2G), 11,000 kg - Hydraulic winch DP (type 45BET2L2), 22,000 kg - Remote control - Multiple toolboxes - Fuel tank: 445 litres - 9-ton front axles - 2 beds - Manual transmission - Full leaf spring suspension - In very good condition! = Further information = General information Number of doors: 2 Registration number: BL-XJ-82 Technical information Number of cylinders: 6 Engine displacement: 12,580 cc Axle configuration Suspension: Leaf spring suspension Front axle 1: Tire size: 385/65 22.5; Max. axle load: 9,000 kg; Steering axle; Left tire tread: 40%; Right tire tread: 40% Front axle 2: Tire size: 385/65 22.5; Max. axle load: 9,000 kg; Steering axle; Left tire tread: 40%; Right tire tread: 40% Rear axle 1: Tire size: 315/80 22.5; Twin tires; Differential lock; Max. axle load: 10,500 kg; Left inner tread: 60%; Left outer tread: 60%; Right inner tread: 60%; Right outer tread: 60%; Reduction: outboard planetary axles Rear axle 2: Tire size: 315/80 22.5; Twin tires; Differential lock; Max. axle load: 10,500 kg; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50%; Reduction: outboard planetary axles Dimensions Dimensions (L x W x H): 1,040 x 250 x 400 cm Weights Unladen weight: 29,470 kg Payload: 7,530 kg Gross vehicle weight: 37,000 kg Interior Number of seats: 2 Maintenance, history and condition Number of owners: 2 Technical condition: good Optical condition: good Product safety Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL