Recovery vehicle

Mercedes-Benz Actros 4148 K 8x4 Falkom Abschlepp met WSK Just...

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Axles and tires: -"PENDEL-AXLE", all axles with hydromechanical forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with stopcocks and locking pin for securing in raised position -Technical axle load: 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 / 3PMSF tires Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm Nsdpfsh Hm Thex Ahzswr -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: used, axle configuration: 2 axles, first registration: 02/2011, total length: 5,790 mm, total width: 2,550 mm, suspension: steel-air, tire size: 315/70R22.5, wheelbase: 3,550 mm, color: brown, Year of construction: 2011, Equipment: ABS, = Additional options and equipment = Nsdpswahwdefx Ahzjwr - Traction control system (ASR) - Roof spoiler - Electric windows - Refrigerator - Sun visor - Cruise control = Remarks = Scania P280 First registration: 25-02-2011. In combination with: TRAVEL SUPREME INC First registration: 10-11-2006. Max weight: 9,000 kg. Trailer is used as a mobile training room. 2 x slide outs. Toilet. Kitchen. Stove. Ovens. Fridge. Heater. = Further information = Tire size: 315/70R22.5 Brakes: Disc brakes Front axle: Steered; Tire tread left: 75%; Tire tread right: 75%; Suspension: Leaf spring Rear axle: Twin tires; Tire tread left inside: 80%; Tire tread left outside: 80%; Tire tread right inside: 80%; Tire tread right outside: 80%; Suspension: Air suspension Unladen weight: 7,470 kg Payload: 1,530 kg Gross vehicle weight: 9,000 kg Type number: P 280 + trailer - 2 X SLIDE OUT = Company information = ALL PRICES ARE NET EXPORT PRICES. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We also speak Russian. We strive to provide accurate information; however, no rights can be derived from the content of these listings.

Condition: used, mileage: 117,555 km, power: 350 kW (475.87 HP), first registration: 05/2009, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: silver, emission class: euro5, Year of construction: 2008, Equipment: ABS, air conditioning, all wheel drive, crane, parking heater, Special equipment: Nwodpfewz Du Iex Ahzsr Trailer brake 2-line, trailer coupling: G 150, trailer socket 24V / 15-pin, audio system: CD radio (Bluetooth), 220 Ah battery, aluminum air reservoir, air horn, cab: movable cab entry, cab: comfort suspension (1.8 Hz), 100 A alternator, noise reduction measure 80 dB(A), graphic info display with eco meter, automatic climate control, light and rain sensor, 2-cylinder air compressor, high-performance belt-driven fan, illuminated Mercedes star, MB 2C PTO, programmable special module, rotating beacon left/right, circuit breaker, cab seats: comfort driver's suspension seat with horizontal suspension, sun visor, side window sun blinds, driver and passenger door, 24V cab socket, impact protection grille, steel front bumper, automatic daytime running lights, cross member for trailer coupling, reverse warning buzzer, additional heat insulation, auxiliary air heater, transmission oil cooler Additional features: 2nd steered front axle, emission standard EURO 5, axle configuration: 8x8/4, front axle load 9.0 t, trailer coupling: towing hitch, vertical exhaust silencer behind cab, electrically adjustable and heated exterior mirrors, steel roof hatch, rear axle differential lock, front axle differential lock, cab: M (medium length), suspension: leaf/leaf, electric windows, 16-speed gearbox, rear axle H 7, 13 t, ring gear 300, hydraulic pump (Meiller pump – 6 pistons), body/chassis: chassis for tipper (additional body), body/chassis: tipper, fuel tank: 300 liters, model update from 06/2008, engine 12.0 L – 350 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4800 mm, rear window, voltage converter 24V/12V 8A, steel rims 9.00x22.5, Telligent shift system, Telligent brake system with ABS, drum brakes front and rear axle, transfer case with differential lock, CB radio pre-installation, preparation for phone/fax, immobilizer, heat-insulating glazing, central locking with keys, gross vehicle weight 41.00 t Errors and prior sale reserved Viewing only by appointment WhatsApp inquiries will not be answered

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long * Rear with chamfer approx. 1,000 mm x 10°, for tractors: 4 x 2, 6 x 2, and 6 x 4 * Front wall made of steel, removable, approx. 400 mm high * ASPÖCK-UNIBOX on the front connection panel with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * Outer beams on the gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of recessed lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm hardwood flooring over the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 1 pair of stakesockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) Loading platform * Extendable loading platform, approx. 8,800 mm long with chamfer at the rear approx. 500 mm x 10° * Recess in the platform including the chamfer for receiving the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood flooring approx. 50 mm thick on the loading platform, interrupted only between the axles * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Platform locking with conically welded securing profiles at approx. every 250 mm * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed, outward-folding lashing rings in the outer frame of the loading area (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axle * Aluminium covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, also serving as extension planks * Hardwood flooring on the loading platform chamfer * Painted-on sand coating on the outer frame of the loading area as well as on the chequered plates of the platform Chassis * BPW axles and suspension * 1st and 2nd axle rigid * 3rd axle self-steering * 3rd axle with electro-magnetic reverse lockout, activated via reverse gear and manually * Air suspension with lift and lower valve * 1st axle with start-up aid * 2 axle load gauges mounted on the left side, including axle load diagram Tyres * 235/75 R 17.5 3PMSF twin tyre configuration * TPMS tyre pressure monitoring system in accordance with ECE R 141 Lighting * 1 LED work light each on the left and right in front of the axles, wired to the tractor unit Loading ramps * Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M, a pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide * Hardwood covering * Hydraulically foldable ramp tips * Ramps can be moved individually hydraulically approx. 235 mm outward and approx. 215 mm inward * Hardwood covering on the platform chamfer * Ramp with hardwood covering Brake system WABCO EBS-E according to EU regulations Lighting system Nsdpfx Ahoxc Axrozowr * 24-volt lighting system * ASPÖCK-NORDIK full LED

Condition: used, mileage: 224,054 km, power: 114 kW (155.00 HP), first registration: 02/1997, fuel type: diesel, overall weight: 7,490 kg, color: orange, gearing type: mechanical, number of seats: 3, Equipment: ABS, Equipment: * Body/superstructure: Ruthmann Steiger T 170 aerial work platform * Max. working height: 17 m * Max. lateral reach: 12 m * Basket load capacity: 200 kg * 4x hydraulic outriggers * Emergency stop * Storage boxes left and right * Driver’s seat hydraulically suspended * Double passenger seat * Suspension: leaf spring/leaf spring Safety: * Rear axle differential lock * Reinforced stabilizer bars front and rear axles * Rotating beacon left/right Nsdpfx Ahov Itrdezowr Other: * First registration in Germany * 4.6 L – 114 kW diesel engine * Perm. gross vehicle weight: 7.49 t Since 1972, your reliable partner for cars and commercial vehicles in 28832 Achim am Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles including vans, commercial vehicles and construction machinery! We continuously offer attractive financing options at special low rates. We are happy to provide you with a personalized quote upon request! We welcome your trade-in of commercial vehicles/construction machinery. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Please note our offer generally does NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle by our external partners is possible for an additional fee. All details in adverts, online, on price tags and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may be subject to separate verification. Errors and prior sale reserved.

Condition: used, mileage: 1,001 km, first registration: 01/1967, tire size: 9.00R20, color: yellow, driver cabin: other, gearing type: other, emission class: none, Vehicle location: Bovenden, If you have any questions, please call! Engine dismantled Engine and spare engine available (untested) Nodsp N Dbpopfx Ahzswr Total weight: 7,490kg ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! - .

Condition: new, axle configuration: 2 axles, loading space length: 18,700 mm, loading space width: 3,000 mm, loading space height: 350 mm, total length: 18,700 mm, total width: 3,000 mm, total height: 350 mm, suspension: hydraulics, tire size: Tyres: 245 / 70 R17.5 Double fitted (load index 146/146 F), color: red, Year of construction: 2025, = Further Information = General Information Year of manufacture: 2025 Applications: Agriculture, forestry, construction, drainage, fruit growing, earthmoving, land management, internal logistics, arable farming, mining, soil drainage, parking management, recycling, cleaning, demolition, horticulture, livestock farming, and road construction Axle Configuration Tyre size: 245/70 R17.5 twin tires (load index 146/146 F) Suspension: Hydraulic suspension Rear axle 1: twin tires; max. axle load: 12,000 kg; steered Rear axle 2: twin tires; max. axle load: 12,000 kg; steered Weights Unladen weight: 13,211 kg Payload: 33,789 kg Gross vehicle weight (GVW): 47,000 kg Functional Extendable design: Yes Condition General condition: good Technical condition: good Nwedexyihhopfx Ahzjr Optical condition: good Financial Information Price: On request Further Information Please contact Stefan Schaapveld for further details.

Condition: used, mileage: 447,000 km, Year of construction: 2017, Please provide reference number upon request: 21623 Specifications:• Km: Approx. 447,000• Gearbox: Automatic• Engine brake• Euro 6, 320 hp• Good tires• Simplex 6TF Jige body• Platform dimensions: 2.5 x 6.4 m• 2 x winches• New main winch 09.02.2024. Replaced at Saferec• This vehicle has a 4.5-ton lifting capacity• It is equipped with full fork equipment for heavy vehicles• Wheel lift• Reversing camera• Tool cabinet• Long cab• Light bar• Stereo not working• Radio/CD• Climate control/AC• Service history from Team Verksted and Scania• Ready for delivery Description:Well-equipped Scania P320 recovery truck from 2017. The truck is fitted with a Jige body, 2 winches, and a wheel lift. The platform measures 2.5 x 6.4 m. Ready for delivery. Km: 447000 HK: 319 Technical approved: Yes EU-approved until: 31.08.2026 Own weight: 12200 Total Weight: 22000 Payload: 9725 Width: 255 Length: 949,5 Nwjdpfx Ahjxq Dhkjzjr Euro: 6 Model: P320 Bergingsbil m/ Simplex 6TF Jige Påbygg Gearbox: Automatic = More information = Serial number: YS2P4X2000542xxxx Please contact ATS Norway for more information

Condition: used, mileage: 6,734 km, power: 140 kW (190.35 HP), first registration: 11/2021, overall weight: 7,490 kg, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 8,400 mm, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2021, Equipment: ABS, air conditioning, MAN TGL 8.190 BB Rotating beacon lights Air-suspended driver's seat Alloy wheels Registered as a self-propelled working machine (green license plate) Axle configuration: 4x2, approach/front mirror, anti-lock braking system (ABS), seatbelt indicator left, audio system: MAN basic Line radio (radio/CD), wide-angle exterior mirror left, wide-angle exterior mirror right, MAN-Tronic onboard computer, curb view mirror right, MAN Brakematic electronic braking system, EURO 6 engine, cab: C (Compact), suspension: leaf/leaf, electric window lifters, tinted windscreen, 6-speed gearbox - type: ZF S6 - 800 OD, rear axle HY-0718, bodywork/chassis: chassis, heated fuel filter, adjustable steering column (steering wheel), raised air intake, dry air filter behind cab, engine brake, spare wheel holder behind rear axle, disc brakes rear axle, disc brakes front axle, front mudguards, tinted side windows, rear axle stabilizer, plastic bumper, tinted door windows, rear underrun protection, viscous fan, cranked front axle VOK-05, permissible total weight 7,490 kg Nwodpfxex A Rrte Ahzjr Boom lift joint-telescopic GSR type E260PJX no. 8559, year of manufacture 2021, working height 25.80 m with rotatable work platform 0.75 x 1.8 x 1.1 m, light-metal rims 4-point outriggers Subject to prior sale and errors.

Condition: used, mileage: 135,534 km, power: 63 kW (85.66 HP), first registration: 02/1981, fuel type: diesel, tire size: 6.50 R16LT, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 5,800 mm, total width: 2,150 mm, total height: 2,500 mm, Year of construction: 1981, Equipment: differential lock, = Additional Options and Accessories = - Leaf springs front and rear - Warning beacons - Spare wheel - Toolbox - PTO shaft = Notes = - Hydraulic loading crane with winch - 2 x hydraulically extendable and 1 x manually extendable - With winch cable - Hydraulic Ramsey winch - Wired remote control for winch - Several storage boxes - Only 135,534 km! = Further Information = General Information Number of doors: 2 Registration number: BB-06-FS Technical Information Number of cylinders: 4 Axle Configuration Suspension: Leaf suspension Front axle: Tyre size: 6.50 R16LT; Max. axle load: 1,900 kg; Steered; Tyre tread left: 50%; Tyre tread right: 50% Rear axle: Tyre size: 6.50 R16; Twin tyres; Differential lock; Max. axle load: 3,300 kg; Tyre tread left inside: 60%; Tyre tread left outside: 60%; Tyre tread right inside: 60%; Tyre tread right outside: 60%; Reduction: single reduction Weights Unladen weight: 3,950 kg Payload: 1,050 kg Gross vehicle weight: 5,000 kg Environment Emission class: Euro 0 History Number of owners: 2 Condition General condition: average Technical condition: average Visual condition: average Nwodpfoxr H D Rjx Ahzer Product Safety Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL