Semi low-loader

Faymonville STZ-3UB

Condition: used, color: yellow, Year of construction: 2013, Faymonville STZ-3UB. Year: 2013. 10 tons SAF axles. Weight: 12,300 kg. Load capacity: 29,700 kg. Max weight: 42,000 kg. Kingpin load: 18,000 kg. Powersteering 3 steering axles. Airsuspension. Hydraulic bridge from floor to neck. - length: 3000 mm. Slitted floor. Winch. Hydraulic from trailer works on NATO electricity. 2 point hydraulic outriggers on the back. 2 way hydraulic ramps: - length: 2850 + 1750 mm. - Hydraulic from left to right. Dimensions: Neck: L: 3750 mm. W: 2500 mm. H: 1400 mm. Kingpin height: 1200 mm. Floor: L: 9550 mm. W: 2550 mm. H: 900 mm. Tyres: 245/70R17.5 80%. ID NR: 439. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = More information = Year of construction: 2013 Unladen weight: 12,300 kg Payload: 29,700 kg Gross weight: 42,000 kg = Company Information = For more information: Dkedpfxsxwbl To Aa Rjg WhatsApp:

Condition: used, maximum load weight: 34,400 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 04/2009, next inspection (TÜV): 07/2024, Equipment: ABS, Further questions via WhatsApp Djdpfx Aajt E Eunj Rokg

Condition: used, color: yellow, Year of construction: 2013, Faymonville STZ-3UB. Year: 2013. 10 tons SAF axles. Weight: 12,300 kg. Load Capacity: 29,700 kg. Max weight: 42,000 kg. Kingpin load: 18,000 kg. Power steering 3 steering axles. Slitted floor. Wink. Allu boards on neck. Hydraulic from trailer works on NATO. Radio remote control. Air suspension. Hydraulic bridge from floor to neck. Length: 3000mm. Dodpsxp Iivsfx Aa Rskg 2 point hydraulic outriggers on the back. 2 way hydraulic ramps: Lenght: 2800 + 1700 mm. Dimensions: Neck: L: 3750mm. W: 2500mm. H: 1380mm. King pin height: 1150 mm. Floor: L: 9600mm. W: 2550mm. H: 900mm. Tires: 245/70R17.5 80%. ID NO: 436. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of construction: 2013 Curb weight: 12,300 kg Payload: 29,700 kg GVW: 42,000 kg = Company information = For more information: WhatsApp:

Condition: new, axle configuration: 3 axles, loading space length: 13,190 mm, loading space width: 2,550 mm, Equipment: ABS, Availability: approx. 5 months after receipt of order! Kässbohrer 3-axle low loader extendable / extendable NEW VEHICLE SLA 3 SCAN Axles / brake system: # BPW axles with drum brake 17.5" # 3rd as self-steering axle Dkedpfjhyrthex Aa Rjg # 1st axle as lift axle # WABCO brake system 4S/3M # 13 x 245 / 70 / 17.5" on steel rims Low loader: # Fifth wheel height: 1250 mm # Low bed length: 9,240 mm + 6,000 mm extendable # 9 x 2 lashing eyes 6 tonnes in the outer frame # 2 x 2 lashing eyes 6 tonnes in the neck # 4 x 2 lashing eyes 6 tonnes on the low bed # 8 x 2 stake pockets Ø63 # Extra-wide brackets 300 mm extendable # Hardwood floor 40 mm # Color: RAL 7021 Ramps: # Hydraulically movable ramps with 40 mm hardwood floor # 4,200 mm long x 750 mm wide x 10° ramp angle # Electro-hydraulic pump 2kW # NATO socket for operating the electro-hydraulics including cable Other: # 4 x over-width signs with bracket for rotating beacon # 1 x tool box on the right in the direction of travel # JOST full trailer support at the front # Manual rear support galvanized # 2 inch kingpin # 24V lighting system Aspöck # Including 2 bearing blocks # Including 12 container locks # E-bike holder with spare wheel ---- Subject to errors, changes and prior sale! Location: KTH-Trailer GmbH in 47574 Goch / Germany.

Condition: used, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2017, * SAF axles * Wheel recesses * Hydr. loading ramps adjustable in width * Air suspension * Extendable * Empty weight: 11,020 kg -----Internal vehicle number: 11010----Subject to errors & prior sale. Djdpfjwta Aljx Aa Rjkg

Condition: used, empty load weight: 8,340 kg, maximum load weight: 32,660 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 11/2020, next inspection (TÜV): 03/2025, loading space length: 13,360 mm, loading space width: 2,500 mm, total length: 25,500 mm, total width: 28,500 mm, total height: 127,000 mm, suspension: air, tire size: 235 / 75 R 17,5, color: red, Year of construction: 2020, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, emission class: none, Equipment: ABS, ABS, axle manufacturer SAF, two-part aluminum ramps 20,000 kg spring-supported, air-lift suspension, lifting and lowering, lift axle 1. axle, steered trailing axle + hydraulic maneuvering aid with radio remote control, trailing steering, wheel recesses, stake pockets, toolbox, aluminium supports, widening plates, 2 x wheel recesses with aluminium wheel recess covers, excavator stick recess, rear drop supports, loading gauge, Nato socket for electric hydraulics, 2 x 3-chamber LED rear lights, container bridge, twist locks, 2 x LED work lights, levelling jack, fifth wheel height 980 mm Dkjdpstxrqqofx Aa Rjg

Condition: used, maximum load weight: 42,500 kg, overall weight: 60,000 kg, axle configuration: 3 axles, first registration: 06/2022, with 12 axles, hydraulically suspended and divided, with hydromechanical forced steering, rear taper and drive-on ramps STZ-L Gooseneck - Robust welded steel construction - Engineered loading platform 3,950 x 2,480 mm including rear taper - Hydromechanical forced steering (dual-circuit steering system) - Turntable-mounted fifth-wheel plate with interchangeable 2-inch or 3.5-inch kingpin and adjustable steering wedge - Fifth wheel load: 24 t - Rear max. steering radius: 2,600 mm Loading platform - Lowered outer sections 4,630 mm long, 420 mm deep, resulting in a loading height of 470 mm or 830 mm with floor inserts - Extendable by 2,053 mm - Includes aluminum bridging rails for creating level surfaces - Excavator boom trough at rear running gear: 4,900 mm long, 880 mm wide, 480 mm deep - Length of rear running gear: 4,900 mm incl. 500 mm rear taper, loading height 890 mm - One pair of wheel recesses in lower deck - 3-axle hydraulically suspended running gear - Split Gigant axles with 600 mm stroke Rear of vehicle - Tapered design, 500 mm - Rear hydraulic support Drive-on ramps - Two-part drive-on ramps, 2,850 + 1,850 mm long, 800 mm wide - Rubber-coated with climbing bars Braking system - Dual-line full air braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special equipment Radio remote control for steering and ramp operation Central lubrication system Technical data Gooseneck Loading platform (LxW): 3,950 x 2,480 mm Loaded fifth wheel height: 1,300 mm Loading platform Platform (LxW): 10,030 x 2,850 mm, extendable by 2,053 mm Lowered outer sections: 4,630 mm + 2,053 mm extension Center beam: 980 mm Excavator trough: 4,900 mm long, 880 mm wide, 480 mm deep Dsdpfx Aaow Etd To Rskg Steering 1st to 3rd axle: hydromechanically forced steered (dual-circuit system)

Condition: used, overall weight: 47,000 kg, axle configuration: 3 axles, first registration: 11/2004, next inspection (TÜV): 08/2026, * Müller Mitteltal TS3 low loader semi-trailer Dodpsw Tgkbefx Aa Rjkg * First registration: 11/2004 * 3 axles * Air suspension * Gigant axles * Hydraulically operated long ramps, extendable and foldable * Load width extensions from 2.50 m to 3.0 m * Loading length: 8.50 m at 0.85 m loading height * Loading length on neck: 3.40 m at 1.50 m loading height * Support legs * Unladen weight: 10,260 kg * Technical gross weight: 47,000 kg * TÜV valid until: 08/2026 * General inspection valid until: 02/2026

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2025, * TS 3 Profile 30.0: * Wabco EBS-E (electronic brake system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring cylinders * Drum brakes * 3 x 11 t BPW Eco Plus axles * Air suspension with lift and lower function as well as RtR valve * Last axle self-steering with electro-pneumatic steering lock Dkodpfx Asl Tnvgja Rsg * Smartboard control box as information tool mounted on the trailer with pressure sensors for total axle load display * Side underrun protection * Support winches at the front and mechanical swing-down supports at the rear of the chassis * 15-pin electrical connector * LED lighting system 12 / 24V * Removable LED rotating beacon, rear left * Mechanically adjustable warning sign packages front and rear * Straight steel sheet mudguards * Spare wheel holder underneath chassis, right side * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm with folding lid * On the sides of the fifth wheel platform: 400 mm fold-down/removable aluminum side walls (RAL 9010 pure white) * Rear wall inserted, 150 mm high * Rear slope on fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks and lowbed with 60 mm wooden planks * Chequer plate over the axles * 8 x mechanical fold-out extensions to a total width of 3 m, but not on the rear slope (extension planks available and stored on the fifth wheel platform) * Lashing package: on the fifth wheel platform, 2 x 6.3 t lashing points each, on the side 3 x 5 t lashing bars in the outer frame, on the lowbed sides 2 x 13.4 t lashing rings each, plus 4 x 10 t lashing rings, pivoting and retractable/flush-mounted in the outer frame; each side 2 x 6.4 t lashing eyes and 1 lashing point at the rear in the excavator arm recess * Excavator arm recess from the end of the last fixed axle over the steering axle to the rear end plate, continuous with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm * 2 x container locks directly after the gooseneck on the lowbed * Mechanical one-piece hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer installation of hydraulic ramp shifting * The outer plank on the ramp is made of 50 mm hardwood * Hydraulic distributor in the trailer (for hydraulic pump performance in the truck from over 40 ltr. up to 120 ltr./min.) * Loading area of the fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Fifth wheel height approx. 1,220 mm (suitable for 2- and 3-axle tractors) * Chassis, ramps, rear supports, and extension consoles hot-dip galvanized * Axles, support winches, and air tanks painted in black * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 16/2026

Condition: used, maximum load weight: 26,600 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2004, next inspection (TÜV): 08/2025, loading space length: 12,600 mm, loading space width: 2,500 mm, loading space height: 900 mm, total width: 2,520 mm, Müller Mitteltal 3 axle semi-trailer low loader Dkjdpfx Aswtlkhja Reg Total weight: 35,000kg technically 41,000 kg Empty weight: 8,400kg Payload: 26,600kg technically 32,600 kg Total length: 13,700mm Loading length: total 12,600mm, gooseneck approx. 2,700mm/ roller slope approx. 1,400mm/ low bed approx. 8,500mm Width: 2,520mm Loading height: approx. 900mm Further information - Side walls gooseneck foldable - Tool box at the front 600mm - Spare wheel bulkhead - Last axle with caster steering - Air suspension - Split long ramps (2,300mm + 1,500mm), hydraulic. Side shift - BPW axles - Warning signs front + rear - Roller slope/gooseneck slope Other new and used low loader semi-trailers available. More information at