Open semitrailer with tarp

KRONE 1-ACHS AUFLIEGER, HECKABSTüTZUNG XL ZERTIFIKAT, EDSCHA-VERDECK,

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate Ijdpfx Ajhlz R Sja Hoar -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: new, mileage: 1 km, fuel type: diesel, tire size: 285/70R19.5, axle configuration: 4x2, wheelbase: 5,350 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: other, permissible axle load (axle 1): 6,000 kg, permissible axle load (axle 2): 10,500 kg, loading space length: 7,500 mm, loading space width: 2,550 mm, loading space height: 2,500 mm, Year of construction: 2025, Equipment: tail-lift, Technical Information Number of cylinders: 6 Engine displacement: 6,700 cc Transmission Transmission: ZF Powerline, 8-speed, automatic Iaodpfewaaxgjx Aa Hor Axle Configuration Tire size: 285/70R19.5 Brakes: Disc brakes Front axle: Max. axle load: 6,000 kg; Tire tread left: 100%; Tire tread right: 100%; Suspension: Parabolic suspension Rear axle: Max. axle load: 10,500 kg; Tire tread left: 100%; Tire tread right: 100%; Suspension: Air suspension Functional Tail lift: Dhollandia DH/LM 2.0, tailgate, 2,000 kg Body manufacturer: Carr De Bruecker sliding curtain Condition General condition: Very good Technical condition: Very good Visual condition: Very good Damages: None Warranty Warranty: None

Condition: new, maximum load weight: 14,500 kg, overall weight: 20,000 kg, axle configuration: 1 axle, loading space length: 11,020 mm, loading space width: 2,480 mm, loading space height: 2,590 mm, Year of construction: 2026, Equipment: ABS, lfd 12064 CITY SEMITRAILER CURTAIN SIDED KRONE 1-axle SEP 10/zLNZ4 CS/BPW TAIL LIFT 2000 kg / TRIDEC Make/Manufacturer: KRONE Registration: NEW VEHICLE, year 2025, please note stock photos online Dimensions: 11020 x 2480 x 2590 mm Gross vehicle weight: 20,000 kg Unladen weight: 5,603 kg Payload: 14,000 kg Fifth wheel load: 10,000 kg air suspension lifting/lowering disc brakes spare wheel holder ABS EBS mileage: 0 axle manufacturer: BPW ECO PLUS 430 forced steering Edscha sliding roof phenolic plywood floor portal doors foldable side fixings: 2 pairs lashing rings aluminum slats: 2 rows wooden slats: 2 rows toolbox curtain tarpaulin tarpaulin color: 9006 silver body paint: silver chassis paint: black tyres: 4 pieces rear axle tyres: 275/70 R 22.5 TRIDEC ROD STEERING (forced steering) BPW ECO PLUS 1 x 10 t axle / with 275/70 R 22.5 and 430 mm disc brake DHOLLANDIA TAIL LIFT 2000 kg standing 2200 mm aluminum platform / upper top flap (with its own battery) charging cable from tractor unit required 15 + 2 x 7-pin socket at the front LASI 12642 XL Ijdovg T Dqjpfx Aa Hsar MULTILOCK OUTER FRAME variable stanchion pockets (for sliding stanchions) space for 27 Euro pallets All information provided without guarantee, subject to prior sale!! Should you have any questions regarding this or other vehicles, please give us a call. If you have any questions for this or another trailer/car, please call us.

Condition: new, overall weight: 22,000 kg, axle configuration: 1 axle, loading space length: 11,105 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, PRSSQTri 09-SYS with body, single axle, tail lift Dual tires 22.5 TRIDEC --- Curtainsider Body, side height 2,600 mm from loading floor to lower edge of outer rail Maximum steering angle 31° Mechanical steering system with 1 drag link for steering one axle Chassis width approx. 2,480 mm Kingpin load max. approx. 12,000 kg Landing gear position approx. 2,300 mm from kingpin Chassis length approx. 11,105 mm Axle loads: 10,000 kg Ride height unladen approx. 1,300 mm at fifth wheel height 1,150 mm Registration with COC documents * Outer frame height approx. 125 mm, with groove for lashing eyes, base thickness approx. 4 mm, with external lashing holes 11 pairs of lashing eyes on the outer frame (tested lashing capacity 5 t per lashing point) 24 t telescopic landing gear Axle Axle manufacturer freely selectable by WEB Trailers (SAF/BPW/Jost) Axle with large disc brake Axle 10 t, disc 22.5", dual tires Air suspension unit per 10 t Lift and lowering device Coupling heads red and yellow Lift and lowering device mounted at the rear right in direction of travel Air tanks 2 x approx. 80 l, steel, painted black EBS brake system by Knorr or Wabco incl. RSS Tire pressure monitoring system 4 branded tires 275/70 R 22.5, branded steel wheels (brand as selected by WEB Trailer) Tail Lift Platform with roll-off protection Platform steel - checker plate Front plug connection for tail lift as Rema socket (without batteries! optional) Tail lift as per our choice, 2.5 t capacity Documentation, manual etc. Operation via control unit in rear right box and remote control with spiral flex cable top right of body Platform height approx. 2,000 mm (standard can be locked at rear) Indicator lights on platform Safety and polarity protection on positive and negative lines (red + blue) Tail lift brand at WEB Trailer’s discretion Body certificate according to DIN EN 12642 XL (with 27 t payload + tail lift) with min. 2 rows of wooden insert slats and locking at the top of platform Contour marking on curtain and rear portal ECE plates on tail lift Rear marker lights (LED, red, top) Sliding roof fixed at rear Top flap for tail lift with gas strut Front marker lights (white, top and bottom, with reflector, LED) 3 sets of side sliders from a manufacturer of your choice (via WEB) Front wall standard steel with 400 mm steel cassettes Internal wear plate approx./max. 2.40 m 3 rows of removable wooden slats Lighting system 24 Volt LED with small multifunction lights 15-pin connector Synchronized side marker lights Roof tarpaulin reinforced 12x12 fabric Ratchet tensioner at rear, release device only at front 2 steel buffer bumpers at the rear corners Plastic mudguards, 180 degrees Antispray mud flaps Side underrun protection both sides, aluminium, steel profile, or plastic Body certificate according to DIN EN 12642 XL Coating/Paintwork: Chassis painted in RAL 9005 or Novagrau 7350, other colours available at extra cost subject to powder colour stock KTL coating with zinc phosphating plus powder, maximum corrosion protection Hot-dip galvanising also optionally available Bodywork colours in RAL of your choice Approval: COC Ex works price Note!!! Images may show special equipment Get expert advice and a free, non-binding quote. Leasing, financing, or hire-purchase available! Iedpfx Aajg Dkyqj Hoar We can accommodate your requirements! Contact us – we are happy to make you an offer. Errors and interim sale excepted!

Condition: new, empty load weight: 5,787 kg, maximum load weight: 14,213 kg, overall weight: 20,000 kg, axle configuration: 1 axle, suspension: air, tire size: 235/72R17,5, Equipment: ABS, truck registration, | Krone City Liner Profi/1-axle curtainsider semi-trailer with forced steering | toolbox | spare wheel holder, Edscha roof | SAF axles with disc brakes | tare weight: 5,787 kg, payload: 14,213 kg | tires: 275/70R22.5 | tail lift 2000kg | length of loading area: 11.25m | errors excepted, subject to input and prior sale. Iajdpfx Aajwrrius Hjr

Condition: new, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 2,760 mm, total length: 13,950 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5, color: grey, Year of construction: 2025, = Additional Options and Equipment = - Body Year of Manufacture: new (The year the body was manufactured.) - Floor material: wood (The material of the floor.) - Door opening width: 248 cm The total width of the door opening and the maximum width of an object that can pass through the door. Iasdpfx Ajx U Uxkoa Hjr = Additional Information = Axle configuration Tire size: 385/65 R22.5 Axle make: SAF 9 Ton Intradisc Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Left tire tread: 100%; Right tire tread: 100% Axle 2: Left tire tread: 100%; Right tire tread: 100% Axle 3: Left tire tread: 100%; Right tire tread: 100% Weights Unladen weight: 6,280 kg Payload: 32,720 kg Gross vehicle weight: 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 1 Identification Registration number: 70300795