Open semitrailer with tarp

KRONE CITY LINER PROFI, 1-ACHS- ZWANGSGELENKT, DHOLLANDIA LBW 2000KG,

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area Lredpfx Ajhlz R Sodwji -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: new, maximum load weight: 14,500 kg, overall weight: 20,000 kg, axle configuration: 1 axle, loading space length: 11,020 mm, loading space width: 2,480 mm, loading space height: 2,590 mm, Year of construction: 2026, Equipment: ABS, lfd 12064 CITY SEMITRAILER CURTAIN SIDED KRONE 1-axle SEP 10/zLNZ4 CS/BPW TAIL LIFT 2000 kg / TRIDEC Make/Manufacturer: KRONE Registration: NEW VEHICLE, year 2025, please note stock photos online Dimensions: 11020 x 2480 x 2590 mm Gross vehicle weight: 20,000 kg Unladen weight: 5,603 kg Payload: 14,000 kg Fifth wheel load: 10,000 kg air suspension lifting/lowering disc brakes spare wheel holder ABS EBS mileage: 0 axle manufacturer: BPW ECO PLUS 430 forced steering Edscha sliding roof phenolic plywood floor Lodpfx Aovg T Dqjdwsri portal doors foldable side fixings: 2 pairs lashing rings aluminum slats: 2 rows wooden slats: 2 rows toolbox curtain tarpaulin tarpaulin color: 9006 silver body paint: silver chassis paint: black tyres: 4 pieces rear axle tyres: 275/70 R 22.5 TRIDEC ROD STEERING (forced steering) BPW ECO PLUS 1 x 10 t axle / with 275/70 R 22.5 and 430 mm disc brake DHOLLANDIA TAIL LIFT 2000 kg standing 2200 mm aluminum platform / upper top flap (with its own battery) charging cable from tractor unit required 15 + 2 x 7-pin socket at the front LASI 12642 XL MULTILOCK OUTER FRAME variable stanchion pockets (for sliding stanchions) space for 27 Euro pallets All information provided without guarantee, subject to prior sale!! Should you have any questions regarding this or other vehicles, please give us a call. If you have any questions for this or another trailer/car, please call us.

Condition: new, empty load weight: 5,418 kg, maximum load weight: 16,582 kg, overall weight: 22,000 kg, axle configuration: 1 axle, suspension: air, tire size: 385/65R22,5, Equipment: ABS, | Krone single-axle trailer | Side lashing points | Portal door | Spare wheel holder | Edscha roof | Errors, input, and advance sales excepted. | Sale to commercial customers only Lrodpfx Aoxuu Euodwoi