Low loader semitrailer

FAYMONVILLE Multimax Satteltieflader (2+2) - nachlaufgelenkt

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long * Rear with chamfer approx. 1,000 mm x 10°, for tractors: 4 x 2, 6 x 2, and 6 x 4 * Front wall made of steel, removable, approx. 400 mm high * ASPÖCK-UNIBOX on the front connection panel with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * Outer beams on the gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of recessed lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm hardwood flooring over the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 1 pair of stakesockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) Loading platform * Extendable loading platform, approx. 8,800 mm long with chamfer at the rear approx. 500 mm x 10° * Recess in the platform including the chamfer for receiving the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood flooring approx. 50 mm thick on the loading platform, interrupted only between the axles * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Platform locking with conically welded securing profiles at approx. every 250 mm * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed, outward-folding lashing rings in the outer frame of the loading area (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axle * Aluminium covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, also serving as extension planks * Hardwood flooring on the loading platform chamfer * Painted-on sand coating on the outer frame of the loading area as well as on the chequered plates of the platform Chassis * BPW axles and suspension * 1st and 2nd axle rigid * 3rd axle self-steering * 3rd axle with electro-magnetic reverse lockout, activated via reverse gear and manually * Air suspension with lift and lower valve * 1st axle with start-up aid * 2 axle load gauges mounted on the left side, including axle load diagram Tyres * 235/75 R 17.5 3PMSF twin tyre configuration * TPMS tyre pressure monitoring system in accordance with ECE R 141 Lighting * 1 LED work light each on the left and right in front of the axles, wired to the tractor unit Loading ramps * Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M, a pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide * Hardwood covering * Hydraulically foldable ramp tips * Ramps can be moved individually hydraulically approx. 235 mm outward and approx. 215 mm inward * Hardwood covering on the platform chamfer * Ramp with hardwood covering Rcsdpfexc Axrsx Agzjh Brake system WABCO EBS-E according to EU regulations Lighting system * 24-volt lighting system * ASPÖCK-NORDIK full LED