Low loader semitrailer

FAYMONVILLE STZ-6WAA 2 fach Tele 32.9 m

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WGOTHPE4560028329, overall weight: 102,000 kg, suspension: hydraulics, color: yellow, Year of construction: 2006, Goldhofer STHP-XLE 6 (2+4) with Excavator Bridge / Lowbed Location: D - 73230 Kirchheim unter Teck Technical specifications according to original TÜV inspection report: - Max. speed: 80 km/h - Fifth wheel load: 30,000 kg - Front axle load: 2 x 12,000 kg - Rear axle load: 4 x 12,000 kg - Gross trailer weight: 102,000 kg (at 30,000 kg fifth wheel load) - Unladen weight STHP-XLE 4 (0+4): 21.30 t / 23.50 t (incl. accessories) - Unladen weight STHP-XLE 6 (2+4): 26.70 t / 28.90 t (incl. accessories) Combination consisting of: GOOSENECK - Type XLE (Universal) - Weight: 4,500 kg Phjdswzl Nmepfx Ahzsa - Max. fifth wheel load: 30,000 kg - Kingpin: 3.5" - Design for direct coupling of the excavator bridge or coupling of the 2-axle bogie - Central lubrication Beka-Max 2-AXLE BOGIE - Type XLE - Weight: 5,300 kg - Axle load: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Chassis width: 2,750 mm - Loaded loading height: approx. 1,240 mm (+/- 300 mm) - Central lubrication Beka-Max EXCAVATOR BRIDGE / LOWBED BRIDGE - Payload: 67.75 t - Extendable: 6,000 – 14,000 mm - Central beam permanently mounted on rear 4-axle bogie - Claw coupling at the front - Central beam width: 1,350 mm - Inner beam width: 600 mm - Construction height: 440 mm - Loaded loading height: 650 mm (ground clearance 210 mm) - Width adjustable from 2,750 mm to 3,250 mm - Sliding tables (Weight 405 kg) - Folding widening floor panels (Weight 1,955 kg) 4-AXLE BOGIE - Type XLE - Weight: 16,110 kg incl. excavator bridge - Axle load: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Chassis width: 2,750 mm - Excavator arm recess: 700 mm - Loaded loading height: approx. 1,140 mm (+400 / -200 mm) - Central lubrication Beka-Max Good condition – German vehicle from first owner – available at short notice from stock in Kirchheim unter Teck – further information on request.

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the length of the loading area, length approx. 3,750 mm, with a bevel at the rear of approx. 850 mm x 10° -Can be raised and lowered hydraulically, stroke +- 250 mm including hydraulic connection connected to the hydraulic axle compensation of the first two axles Phodsk Af Svspfx Ahzea -Open in the rear third -For tractor units: 6 x 4 and 8 x 4 Loading area: -Loading area in extendable design, length approx. 11,000 mm with a bevel at the rear of approx. 500 mm x 10°. -A recess in the loading area and in the bevel to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm -Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically foldable ramp tips. -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -25 mm "Super Grip" rubber floor and approx. 5 mm sheet metal floor as additional reinforcement on the slope of the loading area -20x30 mm square climbing rails, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steered -The steering behavior of the first two axles can be optimally adjusted to the length of the loading area both mechanically and hydraulically. -Hose rupture valve on the axle compensation cylinder with automatic RESET function. -Hydraulic cylinder with shut-off valves and pins for securing in the raised position. -245/70 R 17.5 3PMSF Accessories included: -Steel bulkhead, pluggable, approx. 400 mm high -Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile -1 spare wheel -Outer support of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screwable lashing rings included -Checker plate covering above the gooseneck -On the gooseneck 1 pair of pluggable aluminum side walls on the side, approx. 400 mm high, anodized -On the gooseneck a pluggable aluminum rear wall, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -4 Brake shoes -4 axle load gauges -Mechanical downpipe supports at the front -1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm -Mechanical downpipe supports at the front -Continuous sheet metal covering on the loading area with a painted layer of sand to prevent slipping -1 intermediate table, approx. 500 mm wide, for the pull-out, with long holes for hanging and movable bridging elements -Painted sand coating on the support surfaces of the intermediate table -Mechanical locking for locking the intermediate table to the pull-out -8 pairs of stake pockets in the outer frame -Extensions (galvanized) extendable by approx. 230 mm per side -1 pair of hydraulic. Rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electro-hydraulic unit -Widening planks, loose, in reinforced steel U-frame -Radio and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length Pjdpfxjrgzv Nj Ahzsha * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, mileage: 84,860 km, power: 375 kW (509.86 HP), first registration: 02/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2026, brakes: retarder, color: green, gearing type: mechanical, Year of construction: 2024, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, parking heater, soot filter, Tractor Unit 4X4 Hydrodrive MAN TGX 18.510 BL SA in Full Specification First registration 02/2024 Mileage 84,860 km GM cab with 1 bunk, cab air suspension, swinging entry steps, 3-piece steel bumper, Light & Vision Plus safety package, driver comfort package, Plus interior lighting package, storage package, comfort driver’s seat with Alcantara/leather upholstery, heated and ventilated driver’s seat, rotatable Vario passenger seat, full LED lighting, LED headlights, LED fog lights, high beam assistant, automatic headlight control, 12.3-inch instrument cluster, MAN truck navigation, Climatronic air conditioning, auxiliary water heater, fridge under the bunk, 220-volt socket, ZF 16-speed manual transmission RETARDER and additionally reinforced engine brake EVBec Leaf/air suspension Wheelbase 3,600 mm, short and highly maneuverable Aluminum fuel tank 490 liters 2-line MEILLER tipping hydraulics, large aluminum hydraulic oil tank approx. 200 l, switchable high-/low-pressure system, Tyres Front axle 385/65 R 22.5 Rear axle 315/80 R 22.5 ALCOA Dura-Bright high-gloss aluminum rims Full safety package including active steering MAN Comfort-Steering, Lane Change Support LCS and Turn Assist, side camera system SCS and 360° view assist, ACC adaptive cruise control, EBS, ABS Off-Road with additional off-road logic, emergency brake assist, emergency brake assistant EBA, Lane Departure Warning LDW, Phodpowwv Urjfx Ahzea RENTING is the new BUYING—available immediately from us with full service rental.

Condition: excellent (used), functionality: fully functional, mileage: 217,499 km, power: 367.75 kW (500.00 HP), first registration: 08/2021, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: hydraulics, IVECO TRAKKER 500, year 2021, 217,499 km, EURO6, automatic transmission with retarder, leaf spring suspension, hydraulic system Phjdpfjxrf Tqox Ahzja

Condition: new, empty load weight: 15,900 kg, maximum load weight: 63,500 kg, overall weight: 68,000 kg, axle configuration: > 3 axles, loading space length: 12,700 mm, loading space width: 2,740 mm, loading space height: 860 mm, suspension: air, tire size: 235/75/r17,5, color: grey, operation weight: 52,100 kg, Equipment: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,300 mm, rear with bevel approx. 1,000 mm x 10° Technical fifth-wheel load: 23,000 kg For SZM: 6x2, 6x4 and 8x4 Cargo bed: Loading area in extendable design, length approx. 9,400 mm with bevel at the rear approx. 500 mm x 10° A recess in the loading area and protruding into the chamfer to accommodate the excavator dipper stick approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adjust to the respective loading area length Axles and tires: Podpfemfqi Iox Ahzjha BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool 235/75 R 17.5 3PMSF dual tires Load index 143/141J (144/144F) Two-piece steel ramps: A pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm Hardwood decking Hydraulically hinged ramp tips Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards Brake system: WABCO EBS-E brake system in accordance with EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 to ensure the best corrosion protection Surface treatment: Complete steel structure automatically blasted after welding with wheel blast cleaning Second blasting with corundum for optimum adhesion of the coating system Final coating with 2 layers of 2-component paint in a single color in nova grey, followed by sealing of the cavities with special wax Rims in silver gray Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Steel end wall, pluggable, approx. 400 mm high Connection strip for supply lines to the SZM Spiral cable for supplying the electro-hydraulic unit and/or the electric cable winch between the trailer and SZM with plug Electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches Outer beam of the gooseneck with fastening holes for screwable lashing rings The first hole approx. 200 mm from the front, then approx. every 400 mm One fastening hole in the rear upper area of the gooseneck outer beam for a screwable lashing ring Approx. 40 mm thick hardwood covering over the gooseneck, checker plate covering over the kingpin Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide Continuous, approx. 50 mm thick hardwood planking on the loading area, interrupted between the axles Locking of the cargo bed with conically welded locking profiles every 250 mm, including pretensioning plate Slotted holes for attachable and movable bridging elements: on the fixed part behind the gooseneck on the front of the cargo bed 1 movable intermediate table, for the large cross-section extension tube Control valves for the hydraulic ramps on the right-hand side of the vehicle Central lubrication system with 1 pump, with standard grease according to NLGI-2 Radio remote control for operating the steering, in addition to the cable remote control, with 2 indicator lights on the receiver as single-track control

Condition: used, maximum load weight: 120,000 kg, axle configuration: > 3 axles, first registration: 10/1993, Year of construction: 1993, Equipment: ABS, Manufacturer: GOLDHOFER Type: THP-SL Year of manufacture: 1993 / 2010 Phjdpfjt Irxxsx Ahzja consisting of: - gooseneck with hydraulic unit (year of manufacture: 1993 - hydraulics: 2003) - 2-axle chassis module (year of manufacture: 2010) - 3-axle chassis module (year of manufacture: 1993) - 4-axle chassis module (year of manufacture: 1993) - excavator bed 5.8m rigid (year of manufacture: 2010 - payload 100 tons) - excavator bed 8m + 5m extendable (year of manufacture: 1993 - payload 120 tons) Available immediately. Subject to errors and prior sale.

Condition: used, overall weight: 92,000 kg, axle configuration: > 3 axles, first registration: 08/2006, loading space length: 19,000 mm, loading space width: 3,000 mm, loading space height: 815 mm, total width: 3,000 mm, Equipment: ABS, Goldhofer STZ-H6-57/80A telescopic low loader for wagon transport----                                     Approval          Technical 1 Speed:     80km/h                 65km/h Fifth wheel load:               23,000kg               26,000kg Rear axle load:       10,000kg             11,000kg Total weight:     83,000kg               92,000kg Payload:                52,500kg               61,500kg Own weight: (without accessories):           30,500kg ----Gooseneck: Length: 4,000mm Width: 2,480mm Height: 235mm Seat height: 1,350mm DLR front: 1,420mm DLR rear: 2,700mm King pin 3.5 inches Bevel: bevelled 10 degrees Corners front: bevelled 45 degrees Floor covering: spruce 50mm Seat supports: mechanical Width with side walls: 2,550mm Hydraulic STZ gooseneck with external supports, hydraulically liftable and lowerable with mechanical downpipe supports and hydraulic support cylinders hydromechanical forced steering (2-circuit steering) in flat design (height 235mm) with adjustable guide elements and THP steering cylinders. ----Loading area: Type: Platform Liftable: no Length: 13,000mm Width: 3,000mm Floor covering: sheet metal/spruce 50mm Wheel recesses: no Wider extensions: no Extendable: simply telescopic Length1: 10,000mm Loading heights (loaded) Loading height 1: 815mm Loading area telescopic, designed as an outer and inner tube construction, with 1,070mm long, fixed loading area section at the front. Bolt-link coupling integrated in the fixed loading area section for coupling boiler bridge extension supports, the square rails welded on by us serve as rail tracks in the track widths 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension steps by spring-loaded cylinders and conical bushings Loading area height on the frame center tube (outer tube) approx. 815mm (+/- 130mm) Loading area height on the enclosed rail elements approx. 790mm (+/- 130mm) ----Rear chassis: Chassis type: Standard Loading height: 815mm Width: 3,000mm Wheelbase: 1,360mm Floor covering: Sheet metal Extensions: no Wheel recesses: no Excavator recess: no ----Axles: Number of axles: 6 Lift axle: see accessories Axle type: cranked steering knuckle Axle compensation: hydraulic Axle make: BPW/Eco Driving positions: 1 Axle stroke (1) +/-: 130/130mm Phjdpfjlhn Afex Ahzja Axle stroke (2) +/-: 0/0mm Raising/lowering valve: Yes 1st axle can be suspended pneumatically with lifting bellows ----Steering: Number of steering axles: 6 Steering axle arrangement: all steered Steering angle max: 45° Steering type: Hydr. 2 circles----Tires: Dimension: 235/75 r 17.5 143/141 J Tires. Type: twin Rim type: discs Rim centered: centered ----Brake code: according to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes with ABS del: No Parking brake: spring-loaded EBS: No ECAS: No Remark: Brake calculation no.: GH 4324S ----Chassis remark: Steering designed for the extended state with a larger steering angle of the front axles Open wheel cutouts above the wheels with narrow cross arms in between (ALU covers see accessories below) Control elements protected on the left in the direction of travel Rims 17.5x 6.75 Cranked axles!!! ----Rear of vehicle: Design: Standard 90° Ramp fastening: see accessories Floor covering: Sheet metal Overhang from last axle: 1,300mm Support: see accessories ----Load securing: Lashing rings Number: 5 Loadable up to: 10 tons per piece Arrangement: 2 pairs on the SH                         3 pairs on the LF----Rear extension: Max. load capacity 15,000kg with a

Condition: new, maximum load weight: 61,800 kg, overall weight: 76,000 kg, axle configuration: > 3 axles, Dimensions B 11,970 mm Curb weight 11,200 kg With air suspension, hydromechanical forced steering, easily telescopic loading bed, with access ramps STZ-L gooseneck - Robust welded steel construction - Designed loading bed 3,700 x 2,480 mm - Beveled edge - Hydromechanical forced steering (dual-circuit steering) in a flat design (Overall height 235 mm) with adjustable guide elements - Ball-bearing fifth wheel with replaceable 2" kingpin and adjustable steering wedge - Mechanical seat supports Loading bed - Easily telescopic, designed as an outer/inner tube construction with a 700 mm long, fixed loading bed section at the front - Locking of the extension steps via spring-loaded cylinders Chassis - Air-sprung 5-axle chassis, - Axle assembly BPW (Eco), consisting of one leading-steer axle and three+ hydromechanically forced-steer steering pivot axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Lifting and lowering valve as standard for lowering to a minimum of 790 mm or raising to a maximum of 1000 mm - 1 axle can be lifted Rear of the vehicle - Straight design with climbing rails - Short 1,260 mm overhang from the center of the last axle - Hydraulic rear support Load-up ramps - 2-part loading ramps with a length of 2,750 mm / 1,550 mm, a width of 800 mm - Maximum load capacity per pair of ramps: 50,000 kg Psdpfowcy Rzsx Ahzjha - Hydraulic ramp adjustment - Overall length of the ramps in transport position from the rear edge of the vehicle rear: 300 mm Braking system - Dual-line all-wheel drive air brake system with diaphragm brake cylinders - Automatic load-sensing brake (ALB) - Automatic brake adjuster (AGS) - Parking brake with spring-loaded cylinders - Anti-lock brake Special equipment - Extendable extensions - Central lubrication system "BekaMax" - All lashing eyes installed that can be ordered - Electro-hydraulic power unit with radio remote control - Lifting option (load-dependent) for the first axle Technical specifications Gooseneck Loading area (LxW): 3,700 x 2,480 mm Overall height over fifth wheel coupling: 235 mm Fifth wheel height when loaded: 1,250 mm Loading area Loading area (LxW) 9,300 x 2,550 mm Telescopic by 4,465 mm Loading height when loaded: 855 mm (+140-60) mm) 2nd driving position: 895 mm (+/-100 mm) Steering 1st axle with leading steering and liftable 3rd and 5th axles with hydromechanical forced steering (dual-circuit steering)

Condition: used, axle configuration: > 3 axles, first registration: 10/2006, total width: 2,850 mm, suspension: other, tire size: 285/70R19.5, color: black, Year of construction: 2006, Equipment: ABS, = Additional Options and Accessories = - Central lubrication = Notes = Faymonville Jeep Dolly D3 Year: 10-2006. 1 x lift axle. 1 x friction-steered axle / trailing steering axle. Air suspension. Maximum technical weight: 56,000 kg. Psdpjxbng Esfx Ahzeha Faymonville STBZ-5VA Year: 10-2006. Pendulum axle. Detachable gooseneck. Movable table. Extendable bed: 400 cm. Loading bed: 650 + 400 cm. 50,000 kg gooseneck load. Maximum technical weight: 119,680 kg. = Further Information = Axle Configuration Tire size: 285/70R19.5 Brakes: Drum brakes Front axle 1: Twin tyres; Tire tread left inner: 15%; Tire tread left outer: 60%; Tire tread right inner: 60%; Tire tread right outer: 60%; Suspension: Air suspension Front axle 2: Twin tyres; Tire tread left inner: 30%; Tire tread left outer: 30%; Tire tread right inner: 40%; Tire tread right outer: 60%; Suspension: Air suspension Front axle 3: Twin tyres; Steered; Tire tread left inner: 30%; Tire tread left outer: 70%; Tire tread right inner: 60%; Tire tread right outer: 70%; Suspension: Air suspension Rear axle 1: Twin tyres; Steered; Tire tread left inner: 30%; Tire tread left outer: 60%; Tire tread right inner: 40%; Tire tread right outer: 70%; Suspension: Hydraulic suspension Rear axle 2: Twin tyres; Steered; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 30%; Tire tread right outer: 75%; Suspension: Hydraulic suspension Rear axle 3: Twin tyres; Steered; Tire tread left inner: 60%; Tire tread left outer: 60%; Tire tread right inner: 60%; Tire tread right outer: 60%; Suspension: Hydraulic suspension Rear axle 4: Twin tyres; Steered; Tire tread left inner: 60%; Tire tread left outer: 60%; Tire tread right inner: 40%; Tire tread right outer: 50%; Suspension: Hydraulic suspension Rear axle 5: Twin tyres; Steered; Tire tread left inner: 70%; Tire tread left outer: 70%; Tire tread right inner: 20%; Tire tread right outer: 70%; Suspension: Hydraulic suspension Weights Unladen weight: 36,600 kg Payload: 83,080 kg Gross vehicle weight: 119,680 kg Financial Information Price: On request Identification Type number: STBZ-5VA + 3 AXLE JEEP DOLLY / E = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT). We speak Russian. We strive to provide correct information, but no rights can be derived from these entries.