Working platform semitrailer

ES-GE 3-Achs Sattelanhänger - Bordwände + CV

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm Ltjdpfx Ajw U H Sbshzoa * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: new, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,550 mm, suspension: air, tire size: 385/65 r 22,5, color: white, Year of construction: 2023, Equipment: ABS, New, Disc brakes, 1st axle liftable, 3rd axle steerable, box truck with 1,500 mm steel cage guard, 800 mm aluminum side and rear rails, No. 4 pairs of 90 mm side holes for stanchions, No. 1 pair of front holes, No. 1 pair of rear holes, holes at the cage guard for resting stanchions, No. 12 1,200 mm stanchions, side hooks load stoppers, through-basket for woods, pvc box, wheel holder, ship hooks, pad wear kit Ltjdpfx Ahok Af Tlozsa

Condition: new, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, Delivery time: approximately 3-4 months after receipt of order! NEW VEHICLE Kässbohrer Platform Light SPS 3 # Unladen weight 6,100 kg # Fifth wheel load 15,000 kg # BPW axles with disc brakes # 1st axle as lift axle # Jost landing gear 24 t # Wabco 4S/2M EBS with RSS # 2 x 7 and 1 x 15-pin electrical connections # 24V Aspöck lighting system # Tires: 6 x 385/65 R 22.5 brand-name tires # 2 plastic wheel chocks Equipment: # 30 mm hardwood floor # Over-width equipment (4 galvanized over-width panels with LEDs + 1 rotating beacon) # Stainless steel toolbox on the right in the direction of travel # 6 x 2 Jost container locks, retractable # Stanchion holder mounted on the front wall + 20 stanchions (1500 mm) # 4 rows of stake pockets # 10 x 2 stake pockets in the frame # 7 x 2 4t lashing rings on the platform # 108 lashing points on the outer frame, each with a capacity of 2t # Front wall with Code XL certification! # Chassis cathodic dip-coated and painted RAL 3020 Traffic Red Ljdpsivw Dvjfx Ahzota # Front wall RAL 3020 Traffic Red ----Subject to errors, changes, and prior sale! Location: KTH-Trailer GmbH, 47574 Goch, Germany

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment. Full equipment details on request. Chassis: * Welded construction made of high-quality steel profiles with punched profile cross members, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at the front approx. 130 mm Towing Device * 2” kingpin Underrun Protection * Bolted version, compliant with EU regulations Side Guard Protection * EU-compliant, made of anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-side operation on the right (FR) Axles * 3 x 9 t air-suspension axles * 22.5" disc brakes * Total lift approx. 180 mm * Lift and lowering mechanism operated via rotary slide valve Braking System * Dual-line pneumatic braking system (EU compliant) with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Anti-swapping coupling heads firmly mounted on the front cross member, no connection line to the tractor Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 * Make of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN-bus system Mudguards * EU-compliant Spare Wheel Carrier * None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * Approx. every 400–600 mm in the external frame, holes for attaching tension straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior panelled with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z hardwood floor, recessed in the outer frame with galvanized omega steel profiles Lighting System * EU-compliant, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline marker lights at the rear * Number plate lights * Lane marker lights LED * 1 x 15-pin and 2 x 7-pin connectors at the front cross member Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Beacon mounting bracket incl. rotating beacon * 2 rubber buffers at the rear * Folding and extendable rear access ladder on the right (without platform) * 1 open perforated sheet box, crosswise to direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Ltjdpfx Ahougqvfjzoa Paintwork * Front wall: RAL colour of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + RAL colour of your choice * Side underrun protection: aluminium, anodized; underrun guard: white (RAL 9016 traffic white) * Add-on parts: galvanized / black KTL coated * Rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets crosswise to the loading area * 20 stakes made of galvanized 80/50 tube, total length approx. 1,200 mm * Magazine for 20 plug-in stakes inside the front wall * Container locks for 1 x 40' and 2 x 20' containers, rear flush * Container lock for 1 x 20' container in the center * Working headlight at the lamp support (switched via reverse gear) * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one each on left and right

Condition: excellent (used), functionality: fully functional, machine/vehicle number: VAVJS1339PH522406, empty load weight: 8,520 kg, maximum load weight: 30,480 kg, overall weight: 39,000 kg, first registration: 01/2024, loading space length: 13,500 mm, suspension: air, tire size: 385/55 R22.5, color: yellow, Year of construction: 2024, Equipment: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE BUILDING MATERIAL FLATBED SEMITRAILER RH230 – Forced Steering Two identical units available – Volvo FM 370 tractor unit (year 2018) available on request Chassis number: VAVJS1339PH522406 + VAVJS1339PH522408 Mileage: 7,700 km - Weights Gross technical weight: 39 t Axle unit load (technical): 27 t Fifth wheel load (technical): 12 t DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Max. overall width: 2,550 mm Lsdpfxoxq S H Ie Ahzjta Loading height front approx. 230 mm above ASH = approx. 1,360 mm Coupling height unladen approx. 1,130 mm CHASSIS - Welded steel frame construction - Reinforced for 20 t load at center over 4 m loading length - Frame height front approx. 230 mm - 2" interchangeable kingpin - Chassis for unladen coupling height approx. 1,120 mm – ca. 1,200 mm with air-suspended tractor - 4 mm outside frame with hole spacing approx. 100 mm, slotted hole 50/30 mm, for lashing points of 3.5 t each - 10 pairs of 5 t lashing rings, recessed and hinged in floor, also foldable outwards - 8 pairs of square tube inserts with plug-in housing for 80x80 mm stakes, both sides of outer frame - 6 square tube inserts with plug-in housing for 80x80 mm stakes, crosswise over full width, max. pull 2,000 daN AXLES - BPW EcoDisc axles with 430 mm disc brakes (22.5" disc) - Load capacity 9 t/axle, on-road specification - 1st axle rigid - 2nd and 3rd axles with bogie installation for forced steering STEERING - Forced steering "Tridec TR" on two turntable-steered axles for heavy-duty use - Automatic forced steering, front turntable with steering wedge - Steering transmission via two tie rods, rear axles with bogie - Central lubrication points for steering at the front turntable and rear bogie - Axle lift on 1st axle, raises and lowers automatically depending on weight, lift/lower assistance with speed restriction BRAKE SYSTEM / SUSPENSION - EBS system 2S2M, one axle sensor-controlled - RSS/RSP stability program - Spring-actuated parking brake on 2 axles - Aluminum air tanks - Brake/air connections with Quattromatic quick coupling - EBS/ABS socket at the front - Air suspension with lifting/lowering function, total stroke approx. 200 mm - Automatic adjustment to programmed ride height from 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for in-cab display - Wabco SmartBoard for retrieving data via display (mileage, axle unit load, brake diagnostics, etc.) FLOOR - 27 mm phenolic plywood floor with steel top-hat profile strips above longitudinal beams - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminum forklift protection strip bolted to both sides of the outer frame - Aluminum forklift protection strip, rear crosswise - Enclosed, special steel toolbox by Schoch, black coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, load capacity approx. 1 t, asymmetrical with doors on both sides - Galvanized steel toolbox / monochrome painted lid - 8 removable hardwood transverse support beams, approx. 100/100 mm, steel-edged, fixable in plug-in mounts in the outer frame Very good condition, German registration documents, immediately available.

Condition: new, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, total height: 1,300 mm, Equipment: ABS, NEW VEHICLE Kässbohrer extendable platform SPA X3 Delivery time: approx. 4 months after order placement! Ltedervf Dkjpfx Ahzsa # Fifth wheel load: 18,000 kg # Saddle height: 1,150 mm # Extendable by 3,500 mm Axles / Braking system: # BPW axles with 22.5" disc brakes # 3rd axle is a self-steering trailing axle # 1st axle is a lift axle # WABCO braking system 4S/3M # 6 branded tires 385/65/22.5" on steel rims # Jost landing legs 24t # Electrical connections: 2 x 7-pin and 1 x 15-pin # 24V Aspöck lighting system # 2 plastic wheel chocks Equipment: # Non-removable sliding table, 300 mm long # 30 mm hardwood floor # Oversize equipment (4x galvanized oversize panels with LEDs + 1x rotating beacon) # Stainless steel toolbox 1,000 mm x 500 mm x 500 mm, mounted on the right in the direction of travel # 6x2 retractable container locks # Stake holders mounted under the chassis + 18 stakes 100 mm x 50 mm # 6 rows of stake pockets # 10 x 2 stake pockets in the frame # 7 x 2 lashing rings 13.4t, 8 x 2 lashing rings 8t, 108 lashing points on the outer frame, each rated at 2t # Front wall 1,500 mm high with Code XL certificate! # Chassis KTL-coated and painted RAL 3020 traffic red # Front wall RAL 3020 traffic red ----Subject to errors, modifications, and prior sale! Location: KTH-Trailer GmbH in Goch

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment features. Full equipment list available upon request. - Gooseneck, approx. 4,100 mm in length with central beam - Load platform with double-extendable design, length approx. 9,400 mm - BPW axles and suspension - All axles hydromechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with raise and lower valve - Twin tires 235/75 R 17.5 3PMSF - WABCO braking system, EBS-E - 3 kW electro-hydraulic unit for hydraulic operations. Without installation of supply connections on the tractor unit - 4 pairs of stake pockets integrated in the outer frame of the gooseneck, suitable for insertable stakes approx. 100 x 50 mm - 2-inch king pin Ltsdpfx Aewvzg Rshzoa - 8 pairs of stake pockets integrated in the outer frame of the loading area, suitable for insertable stakes approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left-hand side in direction of travel - Remote steering control from front and rear using cable remote with push buttons, with axle tracking control, without installation in the tractor unit - 2 axle load gauges mounted on the left side - Steel front wall, approx. 1,600 mm high - 3 transverse rows of stake pockets mounted in the floor of the loading area for insertable stakes approx. 100 x 50 mm - 1 transverse row of stake pockets mounted in the floor of the gooseneck for insertable stakes approx. 100 x 50 mm - 1 additional lockable INOX toolbox, mounted under the loading area - WADER container pockets in the loading area for transporting: 2x 20' containers or 1x 40' container - Central automatic lubrication system with 2 pumps, BEKAMAX brand - Complete HRM Metalization (High Resistance Metallisation)

Condition: new, maximum load weight: 98,290 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment features. Full equipment details available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm Ltodpfx Ajxn E I Hohzea * 2 pairs of lashing rings, foldable to the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN) * For tractor units: 6x4 or 8x4 2-axle front undercarriage: * Bolt-eye coupling front and rear. Length approx. 2,970 mm * Undercarriage width: approx. 2,750 mm * 1 pair of lashing rings (LC 10,000 daN) in the outer frame * 2 pairs of lashing rings (LC 10,000 daN) on the central beam Loading platform: * 6-axle extendable loading platform with bolt-eye coupling at the front and rear bevel approx. 500 mm x 8°, length approx. 11,000 mm * Technically extendable by approx. 7,700 mm * Axle spacing: approx. 1,500 mm * 7 pairs of lashing rings along the center beam (LC 10,000 daN) Pendulum axle 2-axle front undercarriage: * Pendulum axle, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle equalization cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and pre-insertion pin for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Pendulum axle 6-axle loading platform: * Pendulum axle, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle equalization cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and pre-insertion pin for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Tyres: * 24 x brand at our discretion (M+S) 245/70 R17.5 load index 143/141L (146/146F) Painting: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Options included: * Truck hydraulic connection with volume regulator (20 l/min), incl. support gantry for supply lines, tractor unit tank must have a minimum capacity of 80 L * with MAX Trailer couplings, alternatively couplings to be provided ex works by the customer * 3.5 inch king pin * Steel front wall, approx. 400 mm high * Plug-in ALU side walls and rear wall on the gooseneck, approx. 400 mm high, anodized finish * Socket for steering operation at the gooseneck via cable remote control with pushbuttons including single-track control of the axles (without installation in the tractor unit) * Control lever on the gooseneck protected by a foldable cover * Control lighting at the gooseneck with on/off switch * BEKA-MAX central lubrication system for one gooseneck with standard grease NLGI-2 * Hydraulic connections from gooseneck to lowbed trailer with screw couplings * BEKA-MAX central lubrication for the 2-axle undercarriage with standard grease NLGI-2 * Stake pocket rails mounted crosswise in the loading platform floor for plug-in stakes approx. 100 x 50 mm * Surface of undercarriage coated with integrated sand coating for anti-slip protection * Hydraulic coupling pin * BEKA-MAX central lubrication system for the loading platform with standard grease NLGI-2 * Loading platform surfa

Condition: used, maximum load weight: 37,535 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and soon-available vehicles, on our website. The following is an excerpt from the equipment specification. Full equipment details available on request. Loading Platform: * Extendable loading platform with pneumatically operated locking mechanism * 7 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Ljdpexgk U Nsfx Ahzeta Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), fitted with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Self-steering axle with electromagnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M), without connecting lines to tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame by a two-component (2K) zinc dust primer * High-quality single-color topcoat (2K) in RAL 3002 carmine red * Rims in silver * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings on galvanised front connector bar * 4 wheel chocks with holders * 2" king pin * Yellow reflective tape compliant with EU-standard on sides, extension and trailer rear * European reflector boards (red-yellow) on rear of trailer * Loading platform with approx. 30 mm thick wooden floor encased in Omega profiles * 10 pairs of stake pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Storage for up to 9 pairs of insertable stanchions approx. 100 x 50 mm bolted to the inside of the front wall * 1 spare wheel holder under the loading platform on the left in the driving direction, without spare wheel * One mudflap at the rear of the trailer * Manual and documentation on USB stick * Bracket for rotating beacon at the rear of the trailer * On gooseneck and rear panel, left and right, one holder each for warning signs, including socket * Speed stickers 80 km/h, rear and both sides * Load gauge for axle load determination including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets on loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * INOX toolbox, approx. 600 x 350 x 600 mm, under the platform on the left in the driving direction * 4 pairs of longitudinal stake pocket rails for 80 x 50 mm insertable stanchions mounted on the loading platform * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 2 LED reversing lights mounted on rear panel * HRM metallisation (High Resistance Metallisation)

Condition: new, maximum load weight: 29,831 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer Mega Platform Trailer Available Immediately TECHNICAL DATA: * K.SFS M / 90 - 12 / 27 DE Fifth wheel height 950 mm Ltodpfxer Ivwvj Ahzoa Kingpin capacity 15,000 kg Axle load 27,000 kg Total weight 42,000 kg Outer length 13,680 mm Inner length 13,610 mm Total width 2,550 mm Inner width 2,480 mm Wheelbase 7,700 mm Gooseneck 90 mm Unladen weight ±%3 6,169 kg CHASSIS: * Made of high-quality and high-strength S460 MC steel KTL coated and painted K-Fix (holes in the outer frame load capacity 2.5 tons) 3 x 9 tons BPW EAC (ECO Air Compact) axles with Disc brakes * 1st axle can be lifted automatically * Wabco brake system * Air suspension with lifting and lowering valve * 6 tires 445/45 R19.5 * Mechanical trailer support from JOST * 30 mm phenolic resin-coated plywood floor with a forklift axle load of 8,000 kg in accordance with EN 283 * KTL-coated steel front panel with plywood protection inside with a height of 2,000 mm * OTHER: * Front wall height 2,000 mm * 1 x tool box made of steel with PVC coating, 1,500 mm wide in front of the axles * 2 x 4 RoRo rings in accordance with EN 29367-2 * 13 x 2 lashing rings for 2 ton capacity in the floor and 7x2 lashing rings for 5 ton capacity in the side frame * 7x2 stake pockets on the outer frame and 5 stake pockets in the middle * Additionally 2x2 additional stake pockets at the front * 4x2 container twistlocks for transporting 1 x 40 ft. or 2 x 20 ft. containers * Extra-wide boards (LED), * 7x2 lashing points on the outer frame with 1t capacity * Stake storage box on the front wall COLORS: * Color of the chassis RAL 3020 traffic red * Color of the front wall RAL 3020 traffic red We are happy to provide you with further information