Tipper semitrailer

RENDERS 2x Lenkachse, Ackerbereifung, Alu-Kipper 48 cbm

Condition: used, Year of construction: 2019, Equipment: compressed air brake, Heatable front and rear windshield Additional device holder / Fedpfx Aer Ilxvea Roft

Condition: used, empty load weight: 10,900 kg, maximum load weight: 43,600 kg, overall weight: 54,500 kg, axle configuration: > 3 axles, first registration: 04/2025, loading space length: 8,700 mm, loading space width: 2,550 mm, loading space height: 855 mm, tire size: 245/70 r17.5, color: grey, Year of construction: 2025, operation weight: 10,900 kg, Equipment: ABS, Gooseneck, rigid, in center tube design: -closed outer frame with cut-outs for lashing straps (LC 1,500 daN) Ffodsi Ai E Repfx Aa Ret -steel floor covering with anti-slip coating -including perforated strip for aluminum docking lights -2" kingpin -Mechanically operated BPW seat posts -550 mm long, 8' chamfer at the gooseneck end -Front wall incl. parking position for rear wall, 400 mm high -Spare wheel holder mounted upright on the front of the gooseneck -3 pairs of LC 5,000 daN lashing rings recessed in the loading area of the gooseneck -Aluminium plug-in drop sides 400 mm high, consisting of 2x drop sides, side length 3,150 mm and rear drop sides with stanchions (galvanized) -Rectangular storage box, aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, center -Storage box 45', aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, left -Storage box 45', aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, right Loading area, easily telescopic: -closed outer frame with cut-outs for tension belts (LC 1,500 daN) -Fixed part at the front 700 mm Sheet metal floor covering with anti-slip coating -Angled interface between fixed section and loading area for attaching bridging rails and wheel recesses -Excavator trough incl. slotted holes for load securing (LC 1,500 daN), length approx. 3,850 mm -Preparation for hydraulic ramp (electrical supply) -spars for widening to 3,000 mm -Sloping vehicle rear 8°, 550 mm long -Carriage design for easy attachment and removal of ramps -Continuous mud flap at the rear -1 pair of LC 10,000 daN lashing points in the middle of the cargo bed behind the gooseneck -7 pairs of LC 10,000 daN lashing points in the outer frame of the cargo bed -6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the cargo bed -1 pair of LC 10,000 daN lashing points in the center of the rear area of the cargo bed -1 pair of stanchion pocket strips approx. in the middle of the cargo bed -1 pair of stanchion pocket rails on the fixed part -1 pair of stanchion pocket rails behind the last axle Ramps: -Hydraulic double folding ramps, 2,750+1,500x800 mm -Wooden decking larch -Control via remote control (possible via cable and radio) -Ramps with quick-change (disassembly) system Chassis: -axle make BPW ECO Max -2 ride heights -4 axles 10 t each (technically 12 t) -Twin tires 245/70 R17.5 -2 x rigid axle and 2 x friction-steered axle -Reverse steering lock on the friction-steered axle via reverse gear -Knorr brake system (in accordance with EU regulations with EBS-E) -TIM G2 from Knorr (trailer information module) -RSS (Roll Stability Support) driving stability control Load-dependent lift axle on the first axle incl. start-up aid (forced lowering of the lift axle possible via TIM) Accessories: -4 wheel chocks with holder 2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and plug-in position for rotating beacon, infinitely adjustable up to 3,950 mm -Fastening options on the gooseneck and on the loading area (alternatively on the ramp, if available) are included -pluggable bulkhead plate at the end of the excavator trough -Electro-hydraulic unit for ramp operation -Ramp operation via radio remote control -Hydraulic relief supports at the rear of the vehicle for support during the loading process -1 Pair of additional reversing lights rear switched to reverse gear -Wooden widening planks - larch (optional)

Condition: new, functionality: fully functional, machine/vehicle number: XPNK0C200PD101865, first registration: 08/2024, next inspection (TÜV): 08/2026, loading space volume: 77 m³, Year of construction: 2024, Technical data: - Saddle height: 1,250 mm / 1,350 mm - Outer length: 12,095 mm - Volume: 77 m³* - Outer width: 2,550 mm - External height: 3,950 mm - Front overhang: 1,495 mm - Support leg spacing: 2,350 mm - Wheelbase: 6,875 mm - Rear overhang: 3,725 mm - Number of axles: 3 - Tire size (standard): 445/65 R 22.5 - Maximum permissible axle load: 10,000 kg - 1st axle: Lift axle - 3rd axle: self-steering axle - Brakes: Drum brakes *Volume depends on the selected options Basic equipment: General - Aluminum vehicle frame for low unladen weight and high payload - Aluminum support leg construction with aluminum drop support legs - All aluminum cross members in heavy-duty design; the short cross members on the axles are the axles are inserted with steel U-profiles Fjdpfx Aasun Iuis Rjft - Aluminum side walls consisting of a 3 mm inner side and a 2 mm outer side - The side walls are continuously welded on the inside over the entire height (for maximum strength and minimum soiling) - Hydraulic tailgate with 115 degree opening angle, integrated lighting and Grain pusher and 115 degree opening angle - Operation via radio remote control - Body sanded, primed and painted in 2K paint - Two-year guarantee on paint and construction Attachment - The fifth wheel plate is built with a robust steel box construction for a maximum fifth wheel pressure of of 18,000 kg (12,000 kg approved / 18,000 kg technical) Loading space - Corrugated aluminum floor boards, 6 mm, 21 boards with aluminum and plastic end caps Wear strips Hydraulic floor drive with 3 cylinders that move 7 floor strips each; Equipped with pressure gauge and temperature protection - Automatically retracting moving partition wall, hydraulically operated by means of radio remote control Price on request Subject to prior sale and errors excepted Locations may vary Internal: S51573

Condition: used, mileage: 238,002 km, power: 375 kW (509.86 HP), first registration: 09/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Safety package Light and Visibility, Advanced, EBS, Full Brake Assist, Retarder Eco, MAN EasyStart anti-roll bar, Emergency brake signal automatic hazard warning flasher activation, MAN Efficient Roll and MAN Idle Speed Driving gearbox function, MAN TipMatic Efficiency Plus control panel MAN EasyControl Long Haul, Glass lifting roof electr, Fire extinguisher 2kg, MAN Mediasystem Navigation Advanced 7'', Navi-SD Europe and Russia, JOST JSK 42 K0 2-inch fifth wheel coupling height 150 mm Fifth wheel dimension 575 mm from center of last axle Fodpsm Narpefx Aa Roft

Condition: new, maximum load weight: 36,020 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 435/50 R 19.5, color: grey, Equipment: ABS, Loading platform: Loading area in extendable design with pneumatically confirmed locking mechanism 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of lashing rings can be folded outwards (LC 5,000 daN) 2 pairs of lashing rings can be folded outwards (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps Brake system: Brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in one color Rear section metallized and painted in RAL 9010 (pure white) Metallic paint is not possible Seat posts: JOST seat posts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDICK (ASS3) ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Axles and tires: BPW axles, air-sprung, with disc brakes (377 mm), with lifting/lowering function The self-steering axles with electromagnetic reverse lock can be activated via reverse gear or manually Axle tool. Tires 435/50 R 19.5 Accessories included: Yellow-red air couplings on the galvanized connection strip at the front 2 wheel chocks with bracket 2" kingpin One galvanized steel bulkhead approx. 1,600 mm high. EN12642-XL. Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer European reflector plates (red/yellow) at the rear of the trailer Loading area with approx. 38 mm thick hardwood floor 10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed 1 spare wheel holder under the cargo bed on the right in the direction of travel Manual and description on USB stick One mud flap at the rear of the trailer A bracket for a rotating beacon at the rear of the trailer A holder for the warning signs on the gooseneck and on the rear panel on the left and right, including a socket One INOX toolbox transversely under the loading area (1,000 x 400 x 2,500 mm) 6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2 x 20ft containers or 1 x 40ft container, an additional locking point is provided in the pull-out for a 45ft container 3 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions Rear speed sticker 60 km/h. 2 reversing lights mounted on the rear panel Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm with a position light A bracket for rotating beacon on the warning signs HRM metallization (High Resistance Metallization) of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces are hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%) Fsdoi Dwlwopfx Aa Rsft

Condition: used, Used vehicle Fsdeup Nw Iopfx Aa Rsft Mulag mower MHU 800 Bj2000 , with mulching head , drive via hydraulics , operation via 2x joystick consoles , 4x parking supports , sale by customer order - subject to prior sale and errors - sale only to traders or export - vehicle no.: -

Condition: used, mileage: 480,662 km, power: 375 kW (509.86 HP), first registration: 01/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Vehicle identification number: WMA13KZZXNP182137 Own weight: 8,132 kg EZ: January 26, 2022 HU HU due XLX driver's cab RETARDER, digital speedometer Automatic climate control, auxiliary heating, 2 beds, Radio-USB/Bluetooth/Navigation, toll preparation, multifunction steering wheel, Refrigerator, heated seats, adaptive cruise control, distance warning, lane assistant, turning assistant, Air suspension front / air suspension rear Diesel tank: 480 l. + 480 l. Fifth wheel height: 980 mm Wheelbase: 3,600 mm Cabin spoiler Tires: 1st axle 315/60 R 22.5 2nd axle 295/60 R 22.5 Changes, prior sale and errors are expressly reserved. The description serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The description according to the purchase contract is decisive. Ffodpfjr Agicox Aa Rst Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply.

Condition: used, empty load weight: 6,220 kg, axle configuration: 3 axles, first registration: 10/2013, next inspection (TÜV): 02/2026, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, 3-axle stainless steel tank semi-trailer, manuf. HLW - First registration: 09.10.2013 - Number of axles: 3 - Suspension: air - Lift axle - Steering axle - Axle type: SAF - Brake: disc - Length: 8,000 mm - Width: 2,550 mm - Height: 3,400 mm - Unladen weight: 6,220 kg - Next inspection: 02.2026 - Body manufacturer: HLW - Tank material: stainless steel - Total tank volume: 27,000 L - Tank compartments: 1 - CIP cleaning Fedpjxc Nq Uofx Aa Reft

Condition: used, mileage: 380,106 km, power: 368 kW (500.34 HP), first registration: 08/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2024, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, BrakeMatic, ESS, EBA2, LGS, xenon lights, automatic lights, air-conditioned driver's seat, leather interior trim, fully retractable cool box under the sleeping berth, storage compartment on the rear cab wall with gooseneck light, control module, alarm clock and charging station, 7' radio with DAB+ and MAN sound system, retractable TV, built-in cupboard, removable TV berth, roof light set and side bars as well as steps, stainless steel fifth wheel coupling Jost JSK 42, height 150 mm, fifth wheel lead 585 mm, fifth wheel plate Jost 40 mm Fodpfx Asv Ndq Toa Rjft

Condition: new, empty load weight: 10,600 kg, maximum load weight: 39,400 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 760 mm, suspension: air, tire size: 205/65 R17.5, color: grey, operation weight: 10,600 kg, Equipment: ABS, Gooseneck: Ffodpfxjt Ag Uwo Aa Ret -Gooseneck with hardwood covering, 30 mm thick -Gooseneck at the rear, straight design -3 pairs of lashing rings (LC 5,000 daN) Loading area in extendable design: -Loading area in extendable design -5 pairs of lashing rings that can be folded outwards -3 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the front of the loading area -Cutouts in the outer frame of the loading area for hanging tensioning straps -Hardwood covering, approx. 48 mm thick, checkered sheet covering over the axles Seatposts: -JOST seatposts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Axles and tires: -BPW axles, two axles rigid, two axles with self-steering -Air suspension, with drum brake, with lifting/lowering- Function -The self-steering axles with electro-magnetic reversing lock can be activated via reverse gear or manually -Axle tool -Tires 205/65 R17.5 Braking system: -Braking system in accordance with EU regulations with EBS-E (4S3M) Steel construction: -Steel construction made of high-strength fine-grain steels -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Electrical system: -Electrical system in accordance with EU regulations, lighting 24 volts, ASPÖCK-NORDIK (ASS3) -ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets -Connection in accordance with ISO: -24N ISO-1185 -24S ISO-3731 -15-pin ISO-12098 Painting: -First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer -A high-quality 2-component (2K) top coat in a single color in Nova gray -Rear section metallized and painted in RAL 9010 (pure white) Accessories included: -A spare wheel with holder in front of the bulkhead -2" kingpins -A galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 brake shoes with holder on the bulkhead -Galvanized folding supports under the bevel of the loading area -A bracket for a rotating beacon at the rear of the trailer -Galvanized extensions, extendable by approx. 230 mm on each side -White Reflective tape in accordance with EU regulations on the side, on the extension and at the rear, red -On the gooseneck and on the rear panel on the left and right, a holder for the warning signs including a socket -European reflector signs (red-yellow) on the rear of the trailer -TPMS tire pressure monitoring system in accordance with ECE R 141 -ALU side walls and rear wall can be plugged into the gooseneck, approx. 2,440 x 400 mm -The rear, galvanized plug-in stanchions are removable, length of the structure approx. 2,560 mm -7 pairs of WADER container bags -1x 20ft container in the loading area; 1x 40ft container in the loading area; 1x 40ft container above the gooseneck; 2x 20ft containers -7 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading status -Movable mounting rail for aluminum loading ramps at the rear of the vehicle -A painted layer of sand on the checker plates on the gooseneck and on the loading area to prevent slipping -Four warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light -A holder for a rotating beacon on the warning signs -Speed sticker 80 km/h at the rear and on both sides -L