Heavy-duty truck

MAN 28.500 TGS mit Lift+Lenkachse Allrad

Condition: new, maximum load weight: 33,750 kg, overall weight: 47,000 kg, axle configuration: 2 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate or short-term delivery, on our website. Excerpt from the equipment list. Full specification available upon request. Neck: - Gooseneck in SNT design to optimize load platform length, approx. length 3,750 mm - Gooseneck hydraulically raisable/lowerable and detachable - Technical kingpin load: 23,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 Low bed: - Low bed with external beams, extendable SUPER LOW design, approx. length 6,850 mm - Low bed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking - Supply lines run protected inside the extendable beams and adjust automatically to the respective bed length - 5 pairs of fold-out lashing rings (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for fitting bolted RUD rings Kwsdpexbmn Ujfx Afnsu Rear running gear: - Rear running gear with closed outer frame, checker plate surface, and continuous prism-shaped digger recess, approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of laying lashing rings in the recess LC 16,000 daN - 1 pair of laying lashing rings in the recess LC 10,600 daN - 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame PENDLE-AXLE: - PENDLE-AXLE system, all axles forced-steered hydro-mechanically - Hose break valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins to secure in raised position - Axles finished with 2 layers of 2K paint, single-color painted in FAY-Grey-34-0260 - Technical axle load: 12,000 kg per axle, hydraulic axle compensation - Axle tools - Tyres: 245/70 R 17.5 3PMSF – Brand at our discretion. Load index (146/146F) TPMS: - TPMS tyre pressure monitoring system according to ECE R 141 Brake system: - Wabco braking system compliant with EU regulations, with EBS-E (2S2M), without connecting lines to the tractor unit Electrical system: - Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the turn signal - ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15-pin. Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel structure: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting: - Complete steel structure automatically shot-blasted after welding with a blast wheel system - Second blasting with corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for best corrosion protection - Final painting with 2 layers of 2K topcoat, single-color in RAL 3002 carmine red per RAL system 841GL Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Remote steering from front and rear via cable control with push buttons, including axle tracking control (without installation in tractor unit) - Electro-hydraulic power unit - 2 pairs of bolted container locks on the outer beams; includes 2 pairs of container locks for 1 x 20' or 1 x 40' container - On the gooseneck: removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H) - Rear galvanized plug-in stakes are removable

Condition: excellent (used), axle configuration: 2 axles, first registration: 06/2015, loading space length: 6,100 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75/17.5, color: red, Year of construction: 2015, Equipment: ABS, = Additional Options and Accessories = Kwodpfxew Dqvwj Afneu - Air suspension = Further Information = Axle configuration Tyre size: 235/75/17.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 2: Twin tires; Max. axle load: 10,000 kg; Steered Weights Unladen weight: 9,900 kg Payload: 35,100 kg Gross vehicle weight: 45,000 kg Functional Loading platform height: 55 cm Extendable superstructure: Yes Condition Technical condition: very good Visual condition: very good FAYMONVILLE MEGAMAX F-S42-1ACA 2-AXLE LOWBED TRAILER SAF AXLES AIR SUSPENSION 1ST AND 2ND AXLES ARE STEERABLE LOAD CAPACITY 35.1 TONNES WABCO EBS-E LOADING PLATFORM LENGTH 610 CM + EXTENDABLE BY 250 CM PLATFORM WIDTH 254 CM PLATFORM THICKNESS 20 CM LOADING PLATFORM HEIGHT +/- 55 CM EXCAVATOR ARM WELL L=315 CM, W=75 CM, DEPTH=28 CM REAR SIDE-MARKER LIGHTS LOAD PLATFORM ANCHOR POINTS TOOLBOX RETURN ROLLER 4 X WHEEL CHOCKS

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Kwjdpsxarl Njfx Afnsu Extract from the equipment list. Full equipment details available on request. Loading Platform: - Lowbed with external beams in extendable SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking mechanism - Supply lines protected inside the extendable side rails, automatically adjusting to the current bed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for attaching RUD screw-on rings Gooseneck: - Gooseneck in SNT design for optimized platform length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractors: 4x2, 6x2 Rear Chassis: - Rear chassis in short version with closed external frame and checker plate cover - Running gear with excavator recess, closed in the rear half to accommodate the air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings horizontal, front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Technical axle load per axle: 12,000 kg - Air suspension with lift and lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF - Manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transmission to the truck via the standardized EBS interface in accordance with ISO 11992 - The truck must be capable of processing and displaying this data for correct operation Braking System: - Braking system according to EU regulations with EBS-E (2S2M) Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with indicators - ASPÖCK-UNIBOX at the front connection point with 24N, 24S, and 15-pin sockets as per standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel Construction: - Steel construction from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure is automatically shot-blasted after welding using a blasting turbine system - Second blasting process with corundum for optimal adhesion of coating system - HRM metallization of complete chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection - Final paint finish with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, as per RAL system 841GL - Rims in silver - Rear section metallized and painted RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test as per ISO 9227-NSS - Cavities sealed with special wax Including the following additional equipment: - 2" King pin - One galvanized steel front wall, approx. 400 mm high - Remote steering of front and rear axles by cable remote control with pushbuttons, including single track axle monitoring (without installation in the tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - Preparation for mounting container locks for 1x 20' or 1x 40' container on the external beams - Without container locks

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Kwjdpfxov Sw E As Afnsu Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: used, functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 29,000 kg, overall weight: 38,000 kg, first registration: 08/2020, color: red, Year of construction: 2020, ES-GE 2-axle low-bed, non-telescopic, Tridec steering Total weight: 38,000 kg Aggregate load (2 x 10,000 kg): 20,000 kg Fifth wheel load: 18,000 kg Unladen weight +/- manufacturer's tolerance: approx. 9,000 kg Payload: approx. 29,000 kg Overall length: approx. 13,650 mm Overall width: approx. 2,540 mm Length of loading area: approx. 13,200 mm Width of loading area: approx. 2,540 mm Front overhang: approx. 1,200 mm Front radius: approx. 1,750 mm Swing-through radius SZM: approx. 2,100 mm Saddle height: approx. 1,150 mm B dimension: approx. 12,000 mm Length of high bed: approx. 3,700 mm Loading height high bed: approx. 1,480 mm Length of low bed: approx. 6,500 mm Loading height low bed: approx. 250 mm Ground clearance low bed: approx. 100 mm Loading height above axle unit: approx. 3,000 mm Specification SZM A dimension: approx. 4,500 mm Semi-mounted height: approx. 1,150 mm Swing-through radius: approx. 2,100 mm Chassis: - Chassis made from high-quality fine-grained steels - Drop deck in rigid design - Axle unit cannot be lowered - Without excavator trough King pin -2" kingpin Supports - without front jacks Axles - 2 x 10,000 kg axles (17.5"), techn. 12,000 kg each - Gigant make - Closed drum brake. Asbestos-free brake linings - Automatic slack adjusters. Center centering - Center distance approx. 1,360 mm Suspension - Air suspension with lifting and lowering - 2nd ride height for air suspension (+ approx. 30 mm) Steering - Hydraulic stub axle steering - All axles are steered. Make "Tridec" Tires - 9 tires 245/70 R 17.5 with load index 146/146 F - Continental tires - Steel rims Brake - Dual-circuit air brakes in accordance with EC directive, make "Knorr" - Automatic load-dependent brake force control - Controlled via standard red/yellow air clutches in accordance with ISO 1726 - Electronic brake, "EBS", 7-pin socket in accordance with ISO 7638, mounted at the front, in accordance with EU directives. WITH ABS 4S/2M - With RSS (Roll Stability Support) - Parking brake by means of spring-loaded cylinder - 4 wheel chocks with holder - Without connecting hoses (reversible flex) to the tractor unit - Aluminum air reservoir - TIMG2 (Trailer Information Module) fitted to read out the current axle loads Underride guard - Integrated in the rear end plate Ksdju U Np Tspfx Afnewu Side frame - Side frame made of UNP steel approx. 200 mm Load securing - 13 lashing points per side with 13,400 kg tensile force, can be folded outwards, mounted in the outer frame - 1 pair of lashing rings with approx. 13,400 kg lashing force in the rear area of the gooseneck, approx. 400 mm from the floor - 1 pair of lashing rings with a tensile force of approx. 13,400 kg at the rear in the low bed on the vertical neck - 7 stake pockets per side on the inside of the outer frame, for stakes approx. 80x50x4 mm, evenly distributed in the outer frame over the entire length of the cargo bed - 6 stake pockets welded to the outside of the side member on each side Floor - Approx. 28 mm thick hardwood floor with omega profiles, laid between the side members - Tear plate (approx. 8/10 mm) over the axle unit Front wall - Designed as a storage box with lid, approx. D 400 x H 450 mm, across the entire width of the loading area, beveled corners Drop sides - 3 plug-in anodized drop sides on the gooseneck, approx. 2,440 x 400 mm - Rear stanchions, galvanized Galvanization - Steel blasting of all iron parts - Galvanizing of the chassis Painting - Priming and single-color painting in RAL 3002 chi

Condition: used, Year of construction: 2010, operating hours: 8,049 h, Equipment: all wheel drive, Serial number: VATZ1111LZB024460 Year of manufacture: 2010 - Operating hours: 8,048 h Road registration Permitted total weight: 6,500 kg Hydraulic quick coupler 3rd and 4th control circuit Bucket - Cutting width: 1,900 mm Pallet fork - Fork length: 1,200 mm Kwjdpfx Afsuz Nc Aoneu Tyres: 405/70 R 20 Modifications, prior sale and errors excepted. The description is intended for general vehicle identification only and does not constitute a warranty in the legal sense. The decisive factor is the description in the sales contract. Our offer generally does not include a new roadworthiness (TÜV) inspection. If a new inspection is required, we will be happy to provide you with an offer from our partner workshops! The vehicle may be fitted with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: new, power: 160 kW (217.54 HP), fuel type: diesel, color: red, tire condition: 100 %, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 8259, Equipment: air conditioning, all wheel drive, cabin, pallet forks, 251.900,- Euro net - Special price! RTH 6.30 - new machine - with felling crane equipment Limited time only! MAGNI RTH 6.30 ... NEW - felling crane - - NEW / unused / has never worked before - year 2023 - 0 hours - power 160 kW = 218 PS - powerful 5,13 L Volvo diesel - engine - Stage 5 / Stage V - lifting capacity 6,0 to - lifting height 29,8 m - lifting reach 26 m then 500 kg capacity - or for example, lifting reach 21 m and then 1,0 to capacity - We would like to send you the load diagram. - 445/65 R 22,5 tires 100% good - extra double-way hydraulic line - radio with USB - quick changer with attachment device detection - hydraulic side tilt - automatic levelling - hydraulic-shear-telescopic stabilizers - touch screen display - overpressure cabin - 360° endless rotation - Liebherr rotary drive - electronic load display - lighting according to StVZO - TÜV package + TÜV acceptance - 40 or 20 km/h road registration - with CE for Europe - incl. radio remote control - incl. basket remote control - incl. AC - air condition - incl. pallet fork FEM or floating Additional extras inclusive: - incl. all-round signal LED ligths - incl. extended radio remote control with saw function, pad support & drive - incl. 3x proportional individual control of the 3x saw function on joysticks - incl. front safety demolition guard - incl. mast openings closed - incl. mast scraper for the extensions - incl. saw software with transponder for Westtech CS750 Smart saw 251.900,- Euro net Special price ID-Nr. 8259 RTH 6.30 - new machine - with felling crane equipment Working basket, tree care basket, asbestos basket, roofer basket, winch from 1,5 - 6,0 to, extension boom winch 4,50m, traverse, hook, bucket, saw -> direct available Office 0049 (0) 5474 - 10 63 Mobil 0049 (0) 151 108 52 801 infoⒶfreker.de The machine is in our stock to visit at any time. The machine has CE certificate and documents. Kedpfx Afsqi Tczenewu We deliver the complete MAGNI program, direct available, on stock !

Condition: new, power: 160 kW (217.54 HP), fuel type: diesel, tire condition: 100 %, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 8445, Equipment: air conditioning, all wheel drive, cabin, pallet forks, Factory New, 360° rotation, including radio remote control. Working basket, tree care basket, asbestos basket, roofer basket, winch from 1,5 - 6,0 to, extension boom winch 4,50m, traverse, hook, bucket, saw... -> direct available - on stock - MAGNI RTH 6.30 ... NEW - NEW / unused / has never worked before - year 2023 - 0 hours - power 160 kW = 218 PS - powerful 5,13 L Volvo diesel - engine - Stage 5 / Stage V - lifting capacity 6,0 to - lifting height 29,8 m - lifting reach 26 m then 500 kg capacity - or for example, lifting reach 21 m and then 1,0 to capacity - We would like to send you the load diagram. - 445/65 R 22,5 tires 100% good - extra double-way hydraulic line - radio with USB - quick changer with attachment device detection - hydraulic side tilt Kwodeqi Hnkjpfx Afnou - automatic levelling - hydraulic-shear-telescopic stabilizers - touch screen display - overpressure cabin - 360° endless rotation - Liebherr rotary drive - electronic load display - lighting according to StVZO - TÜV package + TÜV acceptance - 40 or 20 km/h road registration - with CE for Europe - incl. work lights LED front & rear - incl. work lights LED on the mast - incl. plate holder kit with support plates 60 x 60 x 4 cm - incl. radio remote control - incl. basket remote control - incl. AC - air condition - incl. palettes fork ask for the mega special price offer ! ID-No. 8445 The machine is in our stock to visit at any time. The machine has CE certificate and documents. We deliver the complete Magni program, direct available, on stock ! We are official Westtech sales & service partner. We are official Dieci sales & service partner. We are official Magni sales & service partner. For any questions and help, please contact us at any time.

Condition: new, power: 160 kW (217.54 HP), gearing type: automatic, fuel type: diesel, tire condition: 100 %, axle configuration: 4x4, mast type: telescopic, Year of construction: 2023, operating hours: 1 h, load capacity: 6,000 kg, machine/vehicle number: 8559, Equipment: air conditioning, all wheel drive, cabin, pallet forks, 251.900,- Euro net - Special price! RTH 6.30 - new machine - with felling crane equipment Limited time only! MAGNI RTH 6.30 ... NEW - felling crane - - NEW / unused / has never worked before - year 2023 - 0 hours - power 160 kW = 218 PS - powerful 5,13 L Volvo diesel - engine - Stage 5 / Stage V - lifting capacity 6,0 to - lifting height 29,8 m - lifting reach 26 m then 500 kg capacity - or for example, lifting reach 21 m and then 1,0 to capacity - We would like to send you the load diagram. - 445/65 R 22,5 tires 100% good - extra double-way hydraulic line - radio with USB - quick changer with attachment device detection - hydraulic side tilt - automatic levelling - hydraulic-shear-telescopic stabilizers Kjdpfx Aju S Ad Eofnowu - touch screen display - overpressure cabin - 360° endless rotation - Liebherr rotary drive - electronic load display - lighting according to StVZO - TÜV package + TÜV acceptance - 40 or 20 km/h road registration - with CE for Europe - incl. radio remote control - incl. basket remote control - incl. AC - air condition - incl. pallet fork FEM or floating Additional extras inclusive: - incl. all-round signal LED ligths - incl. extended radio remote control with saw function, pad support & drive - incl. 3x proportional individual control of the 3x saw function on joysticks - incl. front safety demolition guard - incl. mast openings closed - incl. mast scraper for the extensions - incl. saw software with transponder for Westtech CS750 Smart saw 251.900,- Euro net Special price ID-Nr. 8559 RTH 6.30 - new machine - with felling crane equipment Working basket, tree care basket, asbestos basket, roofer basket, winch from 1,5 - 6,0 to, extension boom winch 4,50m, traverse, hook, bucket, saw -> direct available Office 0049 (0) 5474 - 10 63 Mobil 0049 (0) 151 108 52 801 infoⒶfreker.de The machine is in our stock to visit at any time. The machine has CE certificate and documents. We deliver the complete MAGNI program, direct available, on stock !

Condition: used, maximum load weight: 26,310 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 06/2018, Equipment: ABS, Vehicle Identification No.: VAVKSM232JZ413928 German HU 08.2025 - SP due Own weight: 5,690 kg Trough dimensions: 6,800 x 2,330 x 1,470 mm Kwsdpsu Tzr Dofx Afnju Volume: approx. 21.5 m³ BPW Eco Plus axles with disc brakes LIFT AXLE Wheelbase: 1,810 mm Drop-in support legs Platform External swing tailgate Dump truck Roll-up tarpaulin Adjustable underrun protection Tires: 425/65 R 22.5 Subject to change, prior sale, and errors. This description serves as a general identification of the vehicle and does not constitute a warranty under the terms of the sales contract. The description in the purchase contract is decisive. Our offer generally does not include a new TÜV approval. If you require a new TÜV inspection, we would be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply.