Roll-off container

Wassertank, Abrollcontainer, ca. 15-18m³

Condition: new, Year of construction: 2025, color: red, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel construction, rear outlet Body: Water tank roll-off container, approx. 12,700 liters. Roll-off container/water tank approx. 6,000 to 13,000 liters. The volume of the tank shown is approx. 12,700 liters. - Clear internal dimensions L x W x H: 5400x2400x1200 mm (tank 4600mm, platform 800mm) - Material grade: S235 (St-37) - Bottom plate / wall plates: Smooth bottom plate, thickness 5mm, sides 3mm - Forklift pockets on the bottom of the container - Rollers, greaseable - Ventilation with lid/access at the top - C-connection with flap at the top - A-connection with ball valve at the rear - Epoxy coating inside, 50 microns - Primed and painted outside, 40 microns - 2 internal bulkheads - Ladder on the front wall, right side - Additionally, a C-connection with ball valve at the front on the front wall, bottom left The container is fully welded, degreased, blasted, primed inside with epoxy coating 50 µm, primed outside with alkyd primer 40 µm and painted with alkyd resin paint 40 µm in RAL color of your choice. Delivery time: approx. 20-22 weeks Available from 6,000 to 13,000 liters. Price depending on the number of liters between EUR 9,900.00 and approx. EUR 14,000.00 per liter/volume. Bwjdpfelu Hruox Aklju Available with self-priming water pump, self-lubricating with separate motor, flow rate: 129 m³/hour, 2000 l/min, pump height: 17m, grain size: 28mm, fuel: diesel, tank: 4.3 liters, see 2907, additional cost approx. EUR 4,000! Available as a roll-off container as well as a tank. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, mileage: 17,255 km, power: 335 kW (455.47 HP), first registration: 10/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal Number: #365 MB ACTROS 2546 6x2/ Kroll ADR Suction Vehicle, K 1.0 - 13.5 / 36 PESP Body KROLL * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle K 1.0-13.5/36 PESP * 14,500 liter tank capacity (air volume) * 10,000 liter sludge volume | 3,500 liter emulsion chamber * 1,000 liter rinse water volume (non-pressurized) * Discharge with sliding piston Chassis MB ACTROS 2546 6x2 * Automated transmission * 460 HP / 338 kW * 2,200 Nm * EURO 6 * Fuel capacity approx. 500 l * Driver’s cab color MB 9147 Arctic White * 2x LED beacon lights on driver’s cab * Reversing camera * Navigation system * Air conditioning * Coolbox Vacuum system CVS VacuStar W1300, approx. 1,200 m³/h at 400 mBar * Suction hose cassette with telescopic boom and 20m DN100 High-pressure system Speck P45/85-160 / approx. 85 l/min at 160 bar * Small hydraulic HP hose reel for 60m DN 13 Bodexa T Ryspfx Aklewu * Approx. 60m rinse hose DN 13 Special features ADR version L4BH type class FL incl. EX/II, EX/III, and AT * Remote-controlled suction connection pre-piston chamber DN100 * Manhole DN500 on left side * HP lance * Noise protection cladding for the pumps left and right * LED environment lighting * Remote control with two batteries * Tiltable debris container * Reversing camera * Ladder with bracket and anchor points * Advertising board on left and right of tank Technical Data GVW 26,000 KG * Length: 10,700 mm * Height: 3,800 mm * Width: 2,550 mm * Wheelbase: 3,900 mm Optional Equipment: Axle load – measuring device, front axle load 9.0 t, audio system: digital radio DAB / DAB+, Equipment package: ADR, Right exterior mirror with shunting position, 220 Ah battery, brake connections standard and DuoMatic, interactive multimedia cockpit, electrical preparation in cab 24V / 100 A, driver assistance system: high beam assistant and cornering light, suspension: front springs 9.0 t, 3-leaf, front windshield tinted with band filter, hazardous goods version ADR type FL, 12-speed transmission - Type: G 211-12, 3-piece fender, 3-piece fender with splash guard, fuel tank: 510 L aluminum, left, cool box/cooler, 2-cylinder air compressor, reinforced engine brake, steered trailing axle 9 t, liftable, double PTO MB 123-11b/1c, programmable special module, wheelbase variant 4300 mm, frame overhang 1650 mm, rain sensor, acoustic reversing alarm and warning beacon (external warning signal), additional remote control key (2), circuit breaker, seat cover/upholstery: passenger seat velour, seat cover/upholstery: driver’s seat velour, cab seats: both-sided armrests passenger seat, cab seats: comfort suspension passenger seat, cab seats: comfort suspension driver's seat, exterior sun visor, steel rims 11.75x22.5 (on front axle), socket 24V / 25A in passenger footwell, additional socket 24V in passenger footwell, steep shoulder rims 11.75x22.5 (on trailing axle, reinforced), preparation for 4 environment cameras (display on vehicle monitor), preparation for additional headlights, seat belt warning device passenger, seat belt warning devices, transmission oil cooler For further details and/or pictures, please contact us directly. You will find a large selection of other vehicles for BUYING or RENTING at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively...

Condition: new, empty load weight: 10,350 kg, maximum load weight: 39,150 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with rear slope of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood deck, 30 mm thick Loading platform: -Telescoping loading platform with rear slope of approx. 1,000 mm x 8° -1 pair of permanently installed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm -Wheel recesses with square climbing strips 15 x 15 mm and widening in the lower area -Between the 1st and 2nd axles, a pair of permanently installed wheel recesses, approx. 1,610 x 970 x 400 mm -3-part removable galvanized covers over the wheel recesses (W 670 mm) - max. point load 5 tons / piece -Recess in the slope and extending into the loading platform to accommodate the excavator arm, approx. 2,900 x 750 x 210/290 mm -1 pair of lashing rings lying at the front in the loading platform (LC 10,000 daN) -5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) -2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) -2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) -Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) One-piece aluminum ramps: -A pair of one-piece aluminum ramps, approx. 2,500 x 600 mm -Ramp with spring lift mechanism and manually adjustable -Maximum load per pair: 24,000 kg Axles and tires: -BPW axles and suspension, 2 axles rigid, 1 axle steered -Technical axle load: 12,000 kg -Electromagnetic reversing lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -Axle tool -Tires 235/75 R 17.5 -TPMS tire pressure monitoring system according to ECE R 141 Included accessories: -One spare wheel with holder in front of the front wall -2" kingpin -One galvanized steel front wall, approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of wheel chocks with holder on the front wall -Mounting in the rear area of the gooseneck for aluminum ramps Bsdpjiu Er Asfx Aklswu -Widening, galvanized, extendable by approx. 230 mm on each side -Galvanized folding supports under the slope of the loading platform -One mounting for a rotating beacon on the rear of the trailer -White reflector tape according to EU regulations on the side, on the extension and red at the rear -On the gooseneck and on the rear panel, one mounting each on the left and right for warning signs including socket -On the gooseneck, aluminum side and rear panels that can be plugged in, approx. 2,440 x 400 mm -The rear galvanized slotting strips are removable (length of the structure approx. 2,560 mm) -2 pairs of WADER container pockets in the loading platform for a 20ft or 30ft container -3 pairs of rung pockets for slotting strips 100 x 50 mm in the outer frame of the loading platform -One removable galvanized intermediate table with 1 pair of WADER container pockets -Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the slope of the loading platform -A sand coating is applied to the diamond-patterned plates on the gooseneck and on the loading platform for slip resistance -Four warning signs, each extendable by approx. 400 mm, approx. 423 x 423 mm, with a position light -On the warning signs, a mounting for a rotating beacon -Speed sticker 80 km/h at the rear and on both sides -Load manometer for determining the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel structure shot blasted, then the defined visible sur

Condition: used, maximum load weight: 42,500 kg, overall weight: 60,000 kg, axle configuration: 3 axles, first registration: 06/2022, with 12 axles, hydraulically suspended and divided, with hydromechanical forced steering, rear taper and drive-on ramps STZ-L Gooseneck - Robust welded steel construction - Engineered loading platform 3,950 x 2,480 mm including rear taper - Hydromechanical forced steering (dual-circuit steering system) - Turntable-mounted fifth-wheel plate with interchangeable 2-inch or 3.5-inch kingpin and adjustable steering wedge - Fifth wheel load: 24 t - Rear max. steering radius: 2,600 mm Bwedpfxew Etd Te Aklsu Loading platform - Lowered outer sections 4,630 mm long, 420 mm deep, resulting in a loading height of 470 mm or 830 mm with floor inserts - Extendable by 2,053 mm - Includes aluminum bridging rails for creating level surfaces - Excavator boom trough at rear running gear: 4,900 mm long, 880 mm wide, 480 mm deep - Length of rear running gear: 4,900 mm incl. 500 mm rear taper, loading height 890 mm - One pair of wheel recesses in lower deck - 3-axle hydraulically suspended running gear - Split Gigant axles with 600 mm stroke Rear of vehicle - Tapered design, 500 mm - Rear hydraulic support Drive-on ramps - Two-part drive-on ramps, 2,850 + 1,850 mm long, 800 mm wide - Rubber-coated with climbing bars Braking system - Dual-line full air braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special equipment Radio remote control for steering and ramp operation Central lubrication system Technical data Gooseneck Loading platform (LxW): 3,950 x 2,480 mm Loaded fifth wheel height: 1,300 mm Loading platform Platform (LxW): 10,030 x 2,850 mm, extendable by 2,053 mm Lowered outer sections: 4,630 mm + 2,053 mm extension Center beam: 980 mm Excavator trough: 4,900 mm long, 880 mm wide, 480 mm deep Steering 1st to 3rd axle: hydromechanically forced steered (dual-circuit system)

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 6 kg, first registration: 01/2026, fuel type: gasoline, gearing type: mechanical, TITLE: USED DEMOUNTABLE TANK, STEEL CONSTRUCTION, SINGLE COMPARTMENT, WITH 3 OUTLET PORTS: 1 SMALL PORT ON THE FRONT, 1 MEDIUM PORT ON THE FRONT SIDE, AND 1 ON THE REAR, WITH AIR-OPERATED SLUICE GATE. SIDE PIPE PORT (DRIVER’S SIDE) AND TWO FILLING HATCHES ON THE TOP. REF: 25-U-155 Bwsdpfx Aksyfxyfsleu TYPE: Steel tank OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 6.25 m TOTAL EXTERNAL WIDTH: 2.30 m TOTAL TANK LENGTH: 6.00 m TOTAL TANK WIDTH: 2.00 m TANK HEIGHT INCLUDING DEMOUNTABLE FRAME: 2.20 m TOTAL TANK VOLUME: 18,500 liters WEIGHT: 3370 kg COLOR: white Subject to errors and/or omissions The prices shown do not include VAT. Please contact our sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of sales and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specialized in trucks, trailers, and demountable equipment. With a readily available fleet of over 50 trucks and over 150 bodies, containers with and without demountable cranes. S.E.&O Given the amount of advertisements and details provided, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: new, maximum load weight: 38,000 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,550 mm, total width: 2,540 mm, total height: 3,780 mm, Year of construction: 2026, Equipment: ABS, * Humbaur HTS 30 K * Heavy-duty semi-trailer * Low loader * NEW * Immediately available * Fully galvanized * Robust construction * Overall dimensions: 12,630mm x 2,540mm x 3,780mm * Internal dimensions: 12,000mm x 2,540mm * Loading height: 890mm * Fifth wheel height: 1,230mm * Fifth wheel platform: 3,500mm * Low bed: 8,680mm * Gross weight: 48,000kg * Payload: 38,000kg * Tyres: 235/75R17.5 Bedpfx Akor Ic Rwjlewu * SAF low-loader axles with lift and trailing steering axle * Air suspension with raise/lower function * Twin tyres * EBS brake system * 24-volt lighting system * LED side marker lights * Wabco Smart Board * 2-inch kingpin * Chassis frame hot-dip galvanized by immersion * Heavy-duty, welded chassis frame * Climbing strips on the ramp incline * 50mm softwood floor * Recess for excavator arm * 3m equipment package * Steel toolbox under the loading platform * Gooseneck with 400mm front wall * 400mm aluminium side drop-down boards * Front storage box with lid * 3 pairs of 6t lashing rings * 3 pairs of 3t lashing rings * 5 pairs of 10t lashing rings * 6 pairs of 3t lashing rings * 6 pairs of 2t lashing rings * Ramps with rubber covering * Spare wheel with holder on the front wall * LED reversing lights * Visible surface painting available upon request * Further equipment options possible upon agreement ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right of prior sale, as this item is also listed on other platforms. We strongly recommend a viewing and inspection to ensure the buyer has a clear understanding of the condition and suitability of the trailer. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! The internal dimensions provided are approximate. For new vehicles, additional costs for freight and documentation may apply. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Display area: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday–Friday 8:00 to 17:00, Saturday 8:00 to 14:00 Always over 500 new and used trailers in stock!!! Tel.: Fax:

Condition: used, Year of construction: 2018, color: red, overall weight: 15,000 kg, maximum load weight: 13,090 kg, empty load weight: 1,910 kg, loading space volume: 13 m³, loading space width: 2,420 mm, loading space length: 5,450 mm, loading space height: 1,000 mm, mileage: 1,001 km, first registration: 01/2018, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, doors, lashing eyes, and access ramps can be deployed. Bwodpfx Akszz Amgeleu Body: Roll-off container with folding aluminum sideboards, hinged doors, and access ramps, approx. 13 m³. Location: 53925 Kall. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, Year of construction: 2026, color: red, overall weight: 14,630 kg, maximum load weight: 12,500 kg, empty load weight: 2,130 kg, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel body, rear discharge Body: Water tank roll-off container, approx. 10,000 liters. ARCHIVE IMAGES Water tank with platform, approx. 10,000 liters - according to DIN 30722-1. - Clear internal dimensions L x W x H: 5400x2394x approx. 1000 mm (tank 4600mm, platform 800mm) - Overall dimensions L x W x H: 5,683mm x 2,394mm x 1,616mm - Material quality: S235 (St-37) - Floor plate / wall plates: floor plate thickness 5mm, sides 3mm, roof and rear wall 4mm - rear platform made of non-slip sheet metal 5 mm - Frame made of INP180 - Manhole on the roof: diameter 600 mm - Inside, 3 baffle plates, diameter 600 mm (large cavities) - A galvanized and screwed-on step ladder on the front wall - At the bottom of the rear wall, an A-connection with a tap - At the top rear, a B-connection with a flap for filling - On the front wall, a C-connection with a ball valve at the bottom left and right, pipes for venting - 2 greasable steel rollers, L=300mm - 2 riser pipes, galvanized and screwed-on (1 at the front and 1 at the rear) - 2 level indicators made of hose (1 at the front and 1 at the rear) Bjdpfszimczox Akljwu Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200, 300 μm, externally primed with epoxy resin paint 60 μm and painted with 2K paint (polyurethane paint B7) 40 μm in RAL color 3000 Red. With UVV label (DGUV), checklist (safety instructions), and warning marking - waterproof (water tightness will be tested). Available probably from the end of September / beginning of October 2026. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!