Low loader semitrailer

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader 205er

Condition: new, empty load weight: 17,250 kg, maximum load weight: 48,700 kg, overall weight: 66,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,480 mm, loading space height: 375 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 17,250 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and removed hydraulically -For tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Low bed: -Low bed with external supports, designed as a telescopic tank bridge in low construction with extension at the front -Length x width approx. 7,550 mm x 2,740 mm -Mechanical locking of the extension Chassis: -Chassis at the rear with closed outer frame -Checker plate covering and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear Axles, suspension and tires: -"PENDEL-AXLE", all axles hydromechanically forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint in a single color in "FAY-Gray-34-0260" -Technical axle load 12,000 kg -Hydraulic axle compensation Hjdpfjh Hm Tzex Ahzjg -245/70 R 17.5 Accessories: -Steel bulkhead, plug-in, approx. 400 mm high -4 wheel chocks -Gooseneck in the rear upper area closed with a removable cover -1 pair of steel ramps with climbing strips and fastening bolts to bridge the hooks of the low bed -The ramps can be placed over or between the hooks -Fastening options for the steel ramps at the rear between the outer supports of the gooseneck -One Locking point approximately every 1,000 mm on the extension -1 lashing ring on the left and right on the front cross member -Connection strip for supply lines to the tractor unit, attached at the height of the outer frame profile -6 pairs of threaded blocks on the outside of the inner supports of the loading area for mounting screwable rings M24 -6 pairs of countersunk lashing rings on the outside of the outer supports of the loading area, foldable inwards and outwards -1 pair of threaded blocks at the front and rear of the outer supports of the loading area for mounting screwable rings M24 -Hanging strip for loose aluminum loading ramps on the vehicle's end cross member -Central lubrication system with 2 pumps, BEKAMAX brand -Steering from the front and rear, operated by cable remote control, with alignment control of the axles -3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches -Removable loading floor (galvanized) in 3 elements can be inserted between the outer supports with hardwood flooring -Foldable extensions, by approx. 230 mm per side -Extension planks, loose, framed in steel -4 warning signs approx. 423 x 423 mm -Radio remote control for operating the steering -3.5" king pin -Anti-slip sticker on the left bevel of the gooseneck -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Guide plate from the gooseneck for the fifth wheel plate, approx. 800 mm wide -1 spare wheel with mounting adapter -Parking position on the gooseneck for the warning signs when not in use -2 pairs of stake pockets embedded in the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm -Dipper handle recess of the rear chassis closed at the back with a plug-in plate -Color of the trailer MB 7350 Novagrau

Condition: used, maximum load weight: 23,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2013, next inspection (TÜV): 01/2025, loading space length: 19,100 mm, Equipment: ABS, Faymonville 3-axle Multimax low loader F-S43-1AAF Ez: .23 Total weight: 35,000 kg techn. permissible total weight: 58,600 kg Empty weight: 11,500 kg Payload: 23,500 kg SAF axles: 8,000 kg + 8,000 kg + 8,000 kg max: 11,200 kg + 11,200 kg + 11,200 kg Hsdpfx Aeu Ry T Rshzjg Support/fifth wheel load: 11,000 kg Length: 13,675 mm extendable to 19,475 mm Width: 2,540 mm / Height: 3,270 mm Loading area: 13,300 mm extendable to 19,100 mm Wheelbase: 2,900 mm / 1,360 mm Tires: 245/70R17.5 1st axle liftable / 3rd axle steerable TÜV until: ! more on request by email! Information without guarantee/errors excepted! Information provided on the Internet is non-binding descriptions and does not represent guaranteed properties. The seller is not liable for errors, input errors and data transmission errors. Subject to change. Continuous purchase and sale as well as trade-in and rental of cranes and lifting vehicles as well as construction machinery and heavy-duty vehicles

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the length of the loading area, length approx. 3,750 mm, with a bevel at the rear of approx. 850 mm x 10° -Can be raised and lowered hydraulically, stroke +- 250 mm including hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For tractor units: 6 x 4 and 8 x 4 Hodpfx Ahek Af Svezeg Loading area: -Loading area in extendable design, length approx. 11,000 mm with a bevel at the rear of approx. 500 mm x 10°. -A recess in the loading area and in the bevel to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm -Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically foldable ramp tips. -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -25 mm "Super Grip" rubber floor and approx. 5 mm sheet metal floor as additional reinforcement on the slope of the loading area -20x30 mm square climbing rails, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steered -The steering behavior of the first two axles can be optimally adjusted to the length of the loading area both mechanically and hydraulically. -Hose rupture valve on the axle compensation cylinder with automatic RESET function. -Hydraulic cylinder with shut-off valves and pins for securing in the raised position. -245/70 R 17.5 3PMSF Accessories included: -Steel bulkhead, pluggable, approx. 400 mm high -Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile -1 spare wheel -Outer support of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screwable lashing rings included -Checker plate covering above the gooseneck -On the gooseneck 1 pair of pluggable aluminum side walls on the side, approx. 400 mm high, anodized -On the gooseneck a pluggable aluminum rear wall, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -4 Brake shoes -4 axle load gauges -Mechanical downpipe supports at the front -1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm -Mechanical downpipe supports at the front -Continuous sheet metal covering on the loading area with a painted layer of sand to prevent slipping -1 intermediate table, approx. 500 mm wide, for the pull-out, with long holes for hanging and movable bridging elements -Painted sand coating on the support surfaces of the intermediate table -Mechanical locking for locking the intermediate table to the pull-out -8 pairs of stake pockets in the outer frame -Extensions (galvanized) extendable by approx. 230 mm per side -1 pair of hydraulic. Rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electro-hydraulic unit -Widening planks, loose, in reinforced steel U-frame -Radio and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: excellent (used), axle configuration: > 3 axles, loading space length: 17,320 mm, loading space width: 3,200 mm, loading space height: 400 mm, total length: 17,320 mm, total width: 3,200 mm, suspension: hydraulics, tire size: 245/70 R 17.5 | 143/131L (146/146F), color: beige, Year of construction: 2021, Colour: Yellow Loading capacity: 64,800 kg Main Features Manufacturer: Faymonville Model: GigaMax 1+4 / F-S45-2GXX Chassis number: YAFTL1009M0027562 Year of manufacture: 2021 Weights / Loading capacity King pin load: 25,000 kg Axle load: 12,000 kg Total axle load: 12,000 kg x 5 = 60,000 kg Gross vehicle weight (GVW): 84,200 kg Tare weight: 20,200 kg Payload capacity: 64,800 kg Axles Pendle axles Hydraulic suspension All axles with hydraulic steering WABCO braking system with EBS-E Tyres: 245/70 R 17.5 | 143/131L (146/146F) Dimensions Overall length: 17,320 mm Loading platform length: 6,800 mm 2x extension beams: 2,000 mm / 3,000 mm Loading platform width: 2,750 mm / 3,200 mm Loading platform height: 400 mm Ground clearance: 150 mm King pin height: +/- 1,340 mm Additional information: Gooseneck with integrated 1-axle pendle axle Hatz Diesel power pack Hydraulically operated gooseneck Aluminium side boards on gooseneck 2x extension beams: 2,000 mm / 3,000 mm Excavator trough Lashing rings Stainless steel toolbox Spare wheel + holder Rear bumper with lights King pin 3.5” Central greasing system with 2 BEKAMAX pumps = Further information = General information Year of construction: 2021 Hedjvzaanspfx Ahzjg Axle configuration Tyre specification: 245/70 R 17.5 | 143/131L (146/146F) Suspension: hydraulic suspension Front axle: Twin tyres; lift axle; Max. axle load: 12,000 kg; steered Rear axle 1: Twin tyres; lift axle; Max. axle load: 12,000 kg; steered Rear axle 2: Twin tyres; lift axle; Max. axle load: 12,000 kg; steered Rear axle 3: Twin tyres; lift axle; Max. axle load: 12,000 kg; steered Rear axle 4: Twin tyres; lift axle; Max. axle load: 12,000 kg; steered Weights Unladen weight: 20,200 kg Payload: 64,800 kg Gross permissible weight: 85,000 kg Functionality Loading platform height: 40 cm Extendable body: Yes Condition Technical condition: very good Optical condition: very good Financial information Price: On request Further information Please contact Stefan Schaapveld for further details.

Condition: excellent (used), axle configuration: 3 axles, first registration: 07/2016, suspension: air, Year of construction: 2016, Equipment: tail-lift, Suspension: Air suspension Rear axle 1: Steered Rear axle 2: Steered Rear axle 3: Steered gVW: 48,000 kg Technical condition: Very good Visual condition: Very good Price: On request Hsdsvvwzrepfx Ahzog Please contact David F Middelman for further information.

Condition: new, axle configuration: 3 axles, loading space length: 13,190 mm, loading space width: 2,550 mm, Equipment: ABS, Availability: approx. 5 months after receipt of order! Kässbohrer 3-axle low loader extendable / extendable NEW VEHICLE SLA 3 SCAN Axles / brake system: # BPW axles with drum brake 17.5" # 3rd as self-steering axle # 1st axle as lift axle # WABCO brake system 4S/3M # 13 x 245 / 70 / 17.5" on steel rims Low loader: # Fifth wheel height: 1250 mm # Low bed length: 9,240 mm + 6,000 mm extendable # 9 x 2 lashing eyes 6 tonnes in the outer frame # 2 x 2 lashing eyes 6 tonnes in the neck # 4 x 2 lashing eyes 6 tonnes on the low bed # 8 x 2 stake pockets Ø63 # Extra-wide brackets 300 mm extendable # Hardwood floor 40 mm Hjdpohyrthsfx Ahzjg # Color: RAL 7021 Ramps: # Hydraulically movable ramps with 40 mm hardwood floor # 4,200 mm long x 750 mm wide x 10° ramp angle # Electro-hydraulic pump 2kW # NATO socket for operating the electro-hydraulics including cable Other: # 4 x over-width signs with bracket for rotating beacon # 1 x tool box on the right in the direction of travel # JOST full trailer support at the front # Manual rear support galvanized # 2 inch kingpin # 24V lighting system Aspöck # Including 2 bearing blocks # Including 12 container locks # E-bike holder with spare wheel ---- Subject to errors, changes and prior sale! Location: KTH-Trailer GmbH in 47574 Goch / Germany.

Condition: new, functionality: fully functional, power: 1 kW (1.36 HP), Year of construction: 2024, SCHORR electric dumper RR500DEHRA 500 kg 48V electric motor 1000 watts The SCHORR electric dumper is ideal for transporting heavy loads and bulk goods. With a load capacity of 500 kg, this wheelbarrow with electric motor is a real powerhouse that can handle even larger loads effortlessly and, above all, quietly. Thanks to the hydraulic tipping trough with a large tipping radius, you can unload your load easily, quickly and completely. Our electric dumper is powered by a brushless 48V electric motor with an output of 1000 watts. This motor is not only particularly powerful, but also extremely durable and low-maintenance. The motor is also particularly quiet, making it ideal for use in stables, for example. The SCHORR electric motor wheelbarrow offers an impressive battery life of 8 to 10 hours, so you can easily get through the day or shift. The charging time is approx. 7 hours for 100%. The battery dumper is easily charged via the charger included in the scope of delivery at a normal 230V socket. The dumper is easy to operate and has intuitive controls that enable precise and safe handling. The dumper's robust and durable design ensures high stability and load capacity, while the large wheels ensure easy movement on uneven terrain. The compact size of the electric dumper in combination with the swivel rear wheels makes it particularly flexible and maneuverable. It is therefore ideal for use on tight construction sites or in narrow aisles (e.g. in horse stables). SCHORR electric dumper RR500DEHRA - Discover the advantages: - Load capacity up to 500 kg - Hydraulic tipping drive (tipping without effort) - Very easy to operate without effort - Powerful 1000 watt 48V electric motor - Very low-noise & low-vibration operation - Compact size - ideal for tight working areas Technical data: Load capacity: 500 kg weight without packaging: 209 kg with packaging: 258 kg Tilt drive: Hydraulic Motor: 48V electric motor 1000 Watt 4 lead acid batteries (á 12V, 32Ah) Battery life: 8 - 10 hours Charging time: 6 - 7 hours to 100% charge Charger included in the scope of delivery LED lights: 2x 30W Speed: Forward 1st gear: max. 3.3 km/h Hodpsq R S I Hofx Ahzeg Forward 2nd gear: max. 4.2 km/h Forward 3rd gear: max. 5 km/h Reverse: max. 1.5 km/h Overall dimensions: 173 cm x 77 cm x 103 cm Tank dimensions: 109 cm x 66.5 cm x 38.5 cm Container water capacity: 240 l Load volume (depending on filling) up to 350 l Tire dimensions: Front wheels: 16 cm x 6.5 cm Rear wheels: 13 cm x 5 cm Pack size: 143 cm x 77 cm x 86 cm With its powerful electric motor, robust design and high maneuverability, it is the ideal choice for professional use on construction sites and in garden and landscape maintenance. It also saves you time and energy when transporting bulk goods and other heavy materials. Of course, we usually have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop.

Condition: used, maximum load weight: 106,500 kg, overall weight: 143,200 kg, axle configuration: > 3 axles, first registration: 06/2023, Weights Speed 80 km/h Fifth wheel load 26,000 kg - 35,000 kg Axle load 8 x 12,000 kg - 14,000 kg Gross gross vehicle weight 126,000 kg - 143,200 kg Unladen weight approx. 36,700 kg Gooseneck length x width 3,755 mm x 2,480 mm Fifth wheel height (loaded) 1,350 mm Steering radius front / rear 1,350 mm / 2,750 mm Kingpin 3.5" Fifth wheel load 26,000 kg - 35,000 kg Unladen weight 4,200 kg 3-axle chassis, front single tires 285/70 R 19.5 with swing axles, 12-14 t axle load Steering Counter-steered axle arrangement Wheelbase 1500 mm Chassis width 2850 mm Terrain weight Flatbed bridge, single-extendable with rear separation point Length x width 7000 mm x 2850 mm, extendable to 3250 mm Terrain extendable by 4000 mm Height 350 mm Terrain weight 10000 kg Extensions Removable shelves 5-axle chassis: Prisma rear single tires 285/70 R 19.5 with swing axles, 12-14 t axle load Forced steering Wheelbase 1500 mm Chassis width 2850 mm Terrain weight 12150 kg Radio remote control for all functions Hodpfx Ahswcy Nqjzjg Central lubrication system

Condition: used, empty load weight: 10,730 kg, maximum load weight: 38,770 kg, overall weight: 49,500 kg, axle configuration: 3 axles, first registration: 07/2024, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5 3PMSF, color: grey, Year of construction: 2024, Equipment: ABS, Gooseneck: -Gooseneck with beveled corners at the front 45° and with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings -Hardwood decking 30 mm thick Loading area in extendable version: -Loading surface in extendable version with rear slope of approx. 1,000 mm x 8° -6 pairs of lashing rings can be folded outwards -3 pairs of lashing rings can be folded outwards -1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: -A pair of galvanized, two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking -Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable -Maximum load per pair: approx. 40,000 kg Axles and tires: -BPW axles and suspension, 2 axles rigid, 1 axle self-steering -Technical axle load: 12,000 kg -Electro-magnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -axle tool -235/75 R 17.5 3PMSF -TPMS tire pressure monitoring system Paint finish: -First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer A high-quality 2-component top coat in one color in MB 7350 nova grey Accessories included: -One spare wheel with holder in front of the bulkhead -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with holder on the bulkhead -One bracket for rotating beacon at the rear of the trailer -Mounting in the rear area of the gooseneck for ALU trailer lights -Galvanized folding supports under the bevel of the cargo bed -Cover plates to bridge the space between the ramps and the cargo bed -White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear -Electric hydraulic unit at the rear, under the cargo bed -On the gooseneck and on the ramps on the left and right a holder for the warning signs including socket -Control valves for the ramps mounted on the right-hand side of the trailer -ALU drop sides and rear wall can be plugged onto the gooseneck, approx. 2,440 x 400 mm -The rear, galvanized stanchions are removable Length of the body approx. 2,560 mm Hjdpfxevcpage Ahzog -Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with one position light -3 pairs of WADER container pockets in the loading area for a 20ft, 30ft or 40ft container -6 pairs of stake pockets approx. 100x50 mm in the outer frame of the cargo bed -Galvanized extensions, extendable by approx. 230 mm per side -Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope -A layer of sand painted onto the chequer plates, above the kingpin and the cargo bed to prevent slipping -On the warning plates a holder for rotating beacon -European reflector plates (red/yellow) at the rear of the trailer -Speed stickers 80 km/h at the rear and on both sides -Load manometer to determine the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-peened, then the defined visible surfaces coated in Metallization with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished

Condition: used, axle configuration: > 3 axles, first registration: 02/1997, suspension: hydraulics, tire size: 245/70R17.5, wheelbase: 10,670 mm, color: red, Year of construction: 1997, Equipment: ABS, Nooteboom MCO 58-04V 4 x steering axles. 2 x Extendable: 1340 cm. BPW Axle. Distance kingpin to end of trailer: 1200 - 2540 cm. = Further Information = Axle configuration Tyre size: 245/70R17.5 Brakes: Drum brakes Suspension: Hydraulic suspension Rear axle 1: Twin tyres; Steering; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 2: Twin tyres; Steering; Tyre tread left inner: 40%; Tyre tread left outer: 40%; Tyre tread right inner: 40%; Tyre tread right outer: 40% Rear axle 3: Twin tyres; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80% Rear axle 4: Twin tyres; Steering; Tyre tread left inner: 20%; Tyre tread left outer: 20%; Tyre tread right inner: 20%; Tyre tread right outer: 20% Hodow Dtlhopfx Ahzsg Weights Unladen weight: 15,980 kg Payload: 38,020 kg Gross vehicle weight: 54,000 kg Identification Type number: MCO-58-04V / 2 x EXTENDABLE / ST = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN) Wouter Greutink (NL-DE-EN-ES-IT) We speak Russian as well. We strive to provide accurate information, however, no rights can be derived from the texts provided.