Used Scania Truck With Crane Body for sale (2,019)

Condition: used, machine/vehicle number: YS2G6X2000568xxxx, mileage: 66,000 km, Year of construction: 2023, Please provide reference number upon request: 23804 Rsdpfozgrnqox Afwsw Truck specifications: Only 66,000 km 3-axle configuration Steered 3rd axle Full air suspension Good tires Multiple toolboxes Platform: 550 cm + 120 cm extension = 750 cm 3-way tipper (rear, left, right) Trailer hitch VBG coupling Reverse camera Extra lights and indicators around the truck Refrigerator Radio/CD Air conditioning Opticruise Retarder Total length: 1008 cm Width: 255 cm Wheelbase: 455/135 cm Euro 6 Fuel: gas 411 hp Crane specifications: 2023 HMF 2820 Certified until July 2026 Remote control Maximum reach: 17–19.4 meters Versatile crane with strong lifting capacity Max lifting capacity: 5.14 tons Description: The truck is in excellent condition with low mileage and a powerful crane. The combination of gas operation, 3-way tipper and HMF 2820 makes this a cost-efficient vehicle to operate.Ready for delivery! Km: 66000 HK: 410 Technical approved: Yes EU-approved until: 05.10.2026...

Condition: used, machine/vehicle number: YS2PH6X2Z0113xxxx, mileage: 420,000 km, Year of construction: 1989, Please provide reference number upon request: 23675 Specifications: 1989 model Km: approx. 420,000 Wheelbase: 420/135 cm 282 hp Spring: steel 2001 HIAB144D-5 DUO crane Laxo fastening Tip at the cash register Summer tires The box is welded enough to go through the EU Manual AC/climate Bed Radio Ready for delivery at the end of June   Description: 1989 Scania P93H crane truck/ with 14 t/m crane and Laxo attachment and tipper on the box. The photos were taken before the EU inspection, the owner has welded the car enough to go through the EU, but he says there is welding work left to get it properly in order. The car comes with summer tires, in somewhat uncertain condition. Winter tires can be added for an additional price. It is possible to fit a turntable on the car, but this is not included. The owner believes the box is about 5 meters. Ready for delivery at the end of June. Km: 420000 HK: 281 Technical approved: Yes Rjdpfezdn Hdox Afwsw EU-approved until: 01.05.2027 Own weight: 14165 Model: P93H kranbil med 14 t/m kran og Laxo feste og tipp på kassen. Nylig EU-godkjent. SE VIDEO Gearbox: Manual = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R8X4000219xxxx, mileage: 251,000 km, Year of construction: 2023, Please provide reference number upon request: 22510 Specifications: • 2023 model• Km: approx. 251,000 (22.04.2026)• Automatic transmission• Tires (see photos)• Body from 2023• Jonsred J1088S timber crane from 2018• Retarder• Trailer hitch• Euro 6• Length: 1,066 cm• Width: 255 cm• Wheelbase: 320/135 cm• Curb weight: 13,400 kg• 8x4• 770 hp• Bull bar• Damage on right side (see photos)• Auxiliary high-beam lights• 2x air horns• Bed• Refrigerator• Radio/CD• Climate control / AC Description:Scania R770 Tridem timber truck from 2023. Equipped with a 2018 Jonsred J1088 timber crane. The truck is on a service agreement Brand new clutch.There is damage on the right side, shown in the photos.Can be delivered within short time. Km: 251000 HK: 769 Redpfeyl H Anox Afwjw Technical approved: no EU-approved until: 24.03.2026 Own weight: 13400 Total Weight: 36000 Payload: 22525 Width: 255 Length: 1066 Euro: 6 Model: R770 Pusher Tømmerbil m/ Jonsred J1088 kran Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: 110xxxx, mileage: 485,890 km, Year of construction: 1985, Please provide reference number upon request: 23269   Specifications: 1985 model 485,890 km Converted to class 509 motorized equipment 343 hp Net weight: 16,000 kg Permitted total weight: 23,500 kg Max payload: 7,425 kg Length: 820 cm Manual transmission Equipment: Type: TKF 241F Rjdpfxey Rhkxj Afwsw 1997 model Crane with operator cabin 4 outriggers Grapple Saw Description: Scania R112 with TKF 241F superstructure for tree topping/cutting for sale. It has been in daily operation for the last 12 years until the summer of 2025, with approximately 2,500 m² cut annually for private use. The truck was converted to class 509 motorized equipment in 1997. The engine has many operating hours and therefore shows some signs of cylinder blow-by, but the truck starts even at -25°C, so there are still many working hours left in it. The truck has not driven many kilometers and is therefore not heavily affected by rust on the frame or cab. The bodywork has some defects. The crane is in decent condition. It is a large crane with electric controls and foot pedal operation for the saw. The crane cabin has its own heater and can be raised to provide good visibility during operation. It is equipped with 4 outriggers, making it stable during use. There are some hydraulic leaks in a few of the crane cylinders. Ready for de Km: 485890 HK: 343 Technical approved: no EU-approved until: 31.10.2009 Own weight: 16000 Total Weight: 23500 Payload: 7425 Length: 820 Model: R112 Lastebil m/ kran og sag. Gearbox: Manual = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R8X4000216xxxx, mileage: 696,000 km, Year of construction: 2020, Please provide reference number upon request: 23140 Car specifications: 2020 model Km: approx. 696,000 Automatic Tires (see pictures) Jilko P build Room distribution: 3 4 5 4 3 Gardner Denver compressor Euro 6 Length: 1,026 cm Width: 255 cm Wheelbase: 415/136 cm Curb weight: 15,020 kg Max. truck combination weight: 66,000 kg 8x4 650 hp Autoline sand str er Trailer hitch Compressor horn Bed Radio/CD Air conditioning/ac Specifications hinge: 2009 model Air suspension Room distribution: 3 4 5 4 3 Length: 1,000 cm Width: 255 cm Wheelbase: 385/170 cm Curb weight: 6,790 kg Description: Scania R660 bulk truck from 2020 sold with trailer from 2009. It is Jilko on construction on truck and trailer. The car and compressor have recently been serviced. Both the car and trailer are EU approved and ready to be put into operation. Can be delivered within a short time. Watch the video! Km: 696000 HK: 650 Technical approved: Yes EU-approved until: 10.01.2027 Own weight: 15020 Payload: 66000 Width: 255 Length: 1023 Redsy H U Rqepfx Afwew Kw: 478 Euro: 6 Model: R650 8x4 Bulkbil med bulkhenger - Jilko Påbygg Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R8X4000217xxxx, mileage: 311,000 km, Year of construction: 2021, Please provide reference number upon request: 23040 Specifications: Model year: 2021 Mileage: 311,000 km (will increase slightly) 500 hp 8x4 Tires (good) Euro 6 Automatic transmission Suspension: full air 15 pallet spaces Lift on 4th axle Flatbed length: 6.50 m Total vehicle height: 3.90 m Lashing points on flatbed Gross weight: 33,000 kg Payload: 16,700 kg Climate control / AC Radio Lights Extra lights Ready for delivery Crane specifications: Model year: 2021 23 t/m crane 5 hydraulic extensions Approx. 1,500 crane hours (will increase slightly) Certified until: 02/2027 Outriggers Ready for delivery Description: We have a 2021 Scania R500 8x4 flatbed truck with 23 t/m Palfinger crane for sale. According to the owner, the truck is in good condition. It lifts 880 kg at 17 meters. All services on both truck and crane have been carried out continuously at a workshop. Ready for delivery. Km: 311000 HK: 500 Technical approved: Yes EU-approved until: 03.02.2027 Own weight: 15910 Total Weight: 33000 Payload: 16700 Width: 255 Length: 1012 Redpsy Elmysfx Afwjw Euro: 6 Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X2000211xxxx, mileage: 506,000 km, Year of construction: 2015, Please provide reference number upon request: 23258 Specifications: Inspection report with defects available Mileage: approx. 506,000 km Transmission: Automatic Full air suspension Retarder Tires: see photos 6x2 with steering on 3rd axle Rsdpfx Afjy Rdrxjwjw JOAB body 20T hook lift Euro 6, 581 hp Extra front lights Trailer hitch VBG coupling Sleeper cab Wheelbase: 450 cm Radio/CD Climate control / AC Service and maintenance carried out by local workshop Ready for delivery Description: 2015 Scania R580 6x2 hook lift truck.Inspection report with defects is available.Equipped with JOAB body and 20T hook lift. Km: 506000 HK: 580 Technical approved: no EU-approved until: 31.01.2025 Own weight: 10660 Total Weight: 30000 Payload: 19265 Width: 255 Length: 836,5 Euro: 6 Model: R580 6x2 Krokbil m/ JOAB påbygg. Rep objekt Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R8X2000215xxxx, mileage: 191,000 km, Year of construction: 2019, Please provide reference number upon request: 22360 Truck specifications: • EU-approved until 13.08.2026• Model year: 2019• Mileage: approx. 195,000 km• Opticruise• Tyres (see photos)• Retarder• Platform length: approx. 630 cm + 120 cm extension• Outriggers• Boat supports• Factory-new engine• Hydraulic underrun protection• Euro 6• Length: approx. 1,100 cm• Width: approx. 255 cm• Wheelbase: 199 / 316 cm• Unladen weight: approx. 25,740 kg• Drive: 8x2• Engine output: 581 hp• Tool boxes• Reversing camera• Trailer coupling• Light bar• 2 air horns• 2 sleeping berths• Refrigerator• Radio/CD• Climate control / A/C Crane specifications: • Hiab X-HIPRO 858• Model year: 2018• Certified until 11.2026• Total hours: approx. 6,196• Crane hours: approx. 2,172• Load chart• Jib• Winch• Outreach: 8 hydraulic + 6 on jib + 1 manual• Reach: approx. 36 metres• Remote control Redpfeyhllyox Afwew Description:Scania R580 crane truck equipped with an 85 t/m Hiab crane with jib and winch. The crane features 8 hydraulic extensions, 6 extensions on the jib and one manual extension, giving a total reach of approx. 36 metres.Platform length is approx. 630 cm with a 120 cm hydraulic extension.The truck is fitted with a factory-new engine that has seen very little use since installation.Both truck and crane are approved, and the vehicle is reinforced.Available for delivery at short notice.See video! Km: 191000 HK: 580 Technical approved: Yes EU-approved until: 13.08.2026...

Condition: used, machine/vehicle number: YS2R6X2000553xxxx, mileage: 165,000 km, Year of construction: 2019, Please provide reference number upon request: 22359 Specifications: Rjdeyhlk Nspfx Afwow EU-approved 26.09.2026 Model year: 2019 Mileage: Approx. 170,000 km Transmission: Automatic Tires: See pictures Emissions: Euro 6 Flatbed length: Approx. 630 cm Total length: 1,096 cm Width: 255 cm Wheelbase: 475/135 cm Towbar: Yes Reversing camera: Yes Stabilizing legs: Yes Drive: 6x2 Engine power: 500 hp Bullbar: Yes LED bar: Yes Toolbox: Yes Bed: Yes Radio/CD: Yes Climate/AC: Yes Crane Specifications: Crane: Hiab 477E-7 Hipro from 2019 Approved to nov 2026. Hours: approximately 3000 Outreach: 7+6 Jib: Yes Crane diagram: Yes Remote control: Yes Description: 2019 Scania R500 6x2 crane truck with a Hiab 47 t/m crane and 7+6 outreach, equipped with a jib. The flatbed length is 630 cm. Quick delivery available. Km: 165000 HK: 500 Technical approved: Yes EU-approved until: 26.09.2026 Own weight: 20374 Total Weight: 30000 Year controlled until: 11/26 Payload: 9551 Width: 255 Length: 1096 Euro: 6 Model: 2019 Scania R500 6x2 kranbil m/ 47 t/m Hiab kran med jibb. Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R8X2000211xxxx, mileage: 256,000 km, Year of construction: 2016, Please provide reference number upon request: 22729 Car specifications: EU approved until 31.08.2026 2016 model Km: approx. 256,000 Opticruise Tires (see pictures) Retarder 4 hydraulic boat supports Combiplane Length on plan: approx. 670 cm 70 cm extension Laxo sleeves Euro 6 Length: 1,161 cm Width: 255 cm Wheelbase: 194/336 cm Curb weight: 24,690 kg 8x2 581 hp Heating in two cabinets Trailer hitch 2x rotor lamp Work light Rsdpfx Afeyvn Uuewjw Small dent on the roof, shown in pictures Interior heater Bed Radio/CD Air conditioning/ac   Crane specifications: Certified until 06.2026 2015 model Fassi F820, 80 t/m 6 Hydraulic extensions 6 hydraulic jibs 3 manual Crane hours: approx. 1715 Remote control Crane diagram Jib Winch Range: approx. 32 meters Description: Scania R580 8x2 Crane truck from 2016. Both the car and the crane are approved. Services have been carried out at a reputable workshop. The car is equipped with an 80 t/m Fassi crane with jib and winch. Crane has only had 1715 hours. It is a combi plane that can be easily removed. Can be delivered within a short time. Watch video.   Km: 256000 HK: 580 Technical approved: Yes EU-approved until: 31.08.2026 Own weight: 24690 Width: 255 Length: 1161 Kw: 427 Euro: 6 Model: R580 8x2 Kranbil - 80 t/m Fassi kran m/ jibb og vinsj = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X2000203xxxx, mileage: 285,000 km, Year of construction: 2008, Please provide reference number upon request: 23307 Specifications: Mileage: approx. 285,000 km Transmission: Automatic Suspension: Steel front and air rear Good tires Trailer hitch VBG coupling Euro 4 – 500 hp HIAB 322E-8XS crane Remote control Reach: approx. 22 meters Crane chart included Winch Wheelbase: 470 cm Sleeper cab Radio/CD Climate control / AC Services carried out privately Ready for delivery Description:2008 Scania R500 crane truck.Ready for delivery.Equipped with a 32 t/m HIAB crane with winch. Km: 285000 HK: 500 Technical approved: Yes EU-approved until: 10.07.2026 Own weight: 17750 Total Weight: 28000 Payload: 10175 Width: 255 Length: 1015 Euro: 4 Model: R500 Kranbil m/ 32 t/m HIAB Kran. 265 000 km! Gearbox: Automatic = More information = Redpfx Asy R Nd Hofwow Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X4000220xxxx, mileage: 78,000 km, Year of construction: 2025, Please provide reference number upon request: 23299 Rjdjy R Nfdjpfx Afwew   Specifications: • 2025 model• Approx. 78,000 km• Automatic transmission• Tires (see photos)• Euro 6• Galvanized body• Flatbed length: approx. 625 cm• Overall length: 975 cm• Width: 255 cm• Wheelbase: 435/135 cm• Unladen weight: 15,760 kg• 6x4• 660 hp• Trailer hitch• Tool cabinet• Raised roof cab• Auxiliary driving lights• Rotating beacon bar• 2x air horns• 2x beds• Radio/CD• Climate control / AC Crane specifications: • Manufactured in 2019• 23 tonne/metre• Crane load chart• 5 hydraulic extensions• Low crane hours Description: Scania R660 6x4 flatbed truck with rear-mounted HMF crane. Both the truck and crane are delivered ready for operation. The truck is covered by a gold service agreement. Additional interior accessories are not included. Available for delivery on short notice. Km: 78000 HK: 659 Technical approved: Yes EU-approved until: 30.06.2027 Own weight: 15760 Year controlled until: 06.2026 Width: 255 Length: 975 Euro: 6 Model: R660 6x4 Planbil m/ bakmontert 23 t/m HMF kran Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X2000204xxxx, mileage: 870,000 km, Year of construction: 2009, Please provide reference number upon request: 23419 Truck Specifications: 2009 model EU-approved until: 30.08.26 Mileage approx: 870,000 Manual transmission 6x3 Retarder Euro 5 480 hp Tires (see pictures) Front suspension: steel Rear suspension: air 2 beds Diesel heater Air conditioning Radio Lights Ready for delivery Trailer Specifications: 2008 model EU-approved until: 30.08.26 3-axle Tires (see pictures) Lift on 1 axle Axle 1 to 2: 290 cm Payload: 18,315 kg Full side opening on both sides Sliding roof Interior width: 2.538 m Interior length: 13.614 m Interior height: 2.844 m Lashing points Ready for delivery Description: We have a 2009 Scania R480 6x2 tractor with a 3-axle Krone Profi Liner Nordic tarpaulin trailer for sale. Everything works as it should according to the owner. Services have been carried out regularly. The mileage may increase slightly as it is in weekly operation. This set is sold together. Ready for delivery. Km: 870000 HK: 480 Technical approved: Yes EU-approved until: 30.08.2026 Own weight: 8610 Total Weight: 27000 Payload: 18315 Width: 255 Redpfxoy Sr D Ee Afwow Length: 660 Kw: 353 Euro: 5 Model: R480 6x2 trekkvogn m/ 3 akslet krone profi liner nordic kapelltralle Gearbox: Manual = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X2000203xxxx, mileage: 575,300 km, Year of construction: 2008, Please provide reference number upon request: 23362 Specifications: 2008 model Mileage: 575,300 km EU approved until: 06.03.27 Automatic transmission Euro 4 Retarder Service performed at Scania 620 hp Tires (see pictures) Wheelbase from axle 1-2: 410 cm Wheelbase from axle 2-3: 135 cm Own weight: 12,820 kg Allowed total weight: 27,000 kg Climate/AC Radio Bunk Tipping box included with aluminum sideboards Ready for delivery Description: We have a 2008 Scania R620 6x2 asphalt truck with a manual tarp and tipping box for sale. The truck has just been EU approved. It needs a bit of water topped up in the radiator. Other than that, the truck operates as it should according to the owner. Ready for delivery. Km: 575300 HK: 620 Technical approved: Yes EU-approved until: 06.03.2027 Own weight: 12820 Total Weight: 27000 Payload: 14105 Width: 255 Length: 855 Kw: 456 Euro: 4 Model: R620 6x2 asfaltbil m/manuelt kapell og tipp kasse Gearbox: Automatic Rodpfx Aoy Sftgofwew = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X2000546xxxx, mileage: 767,870 km, Year of construction: 2017, Please provide reference number upon request: 23355 Specifications: 2017 model Mileage: 767,870 EU approved until: 31.03.27 Automatic Retarder 6x2 Tires (see pictures) 520 hp Suspension: air suspension Total height of the vehicle: approx. 4.2 m Interior height: 3.157 m Interior width: 2.481 m Interior length: 7.637 m Weight: 12,580 kg Allowed total weight: 27,000 kg Service history Full side opening on both sides Sliding roof Climate/AC Radio Lights Ready for delivery Trailer specifications: 2017 model EU approved until: 31.03.27 Tires (see pictures) 2 axles Full side opening on both sides Sliding roof Interior length: 7.639 m Interior width: 2.474 m Interior height: 3.209 m Ready for delivery Description: We have a 2017 Scania R520 6x2 box truck with a 2017 2-axle Schmitz Cargobull box trailer for sale. All services have been carried out at Scania and can be presented. Everything functions as it should according to the owner. Faults and deficiencies may occur, and some cosmetic damages exist. Ready for delivery. Km: 767870 HK: 519 Technical approved: Yes EU-approved until: 31.03.2027 Own weight: 12580 Total Weight: 27000 Payload: 14345 Width: 255 Length: 1017 Kw: 382 Redpfx Aoy Sfl Aefwjw Euro: 6 Model: R520 6x2 kapellbil m/ 2017 2 akslet Schmitz cargobull kapell henger Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: XLER6X2000526xxxx, mileage: 650,000 km, Year of construction: 2011, Please provide reference number upon request: 23678 Specifications: 2011 model Mileage: approx. 650,000 EU approved until 30.09.2026 Euro 5 6x2 480 hp Wheelbase: 470/136 cm Retarder Suspension: Parabolic front, air rear Gearbox replaced at around 400,000 km 18 T hook Crane hydraulics Tires (see pictures) AC/climate Bed Radio/DAB Videos Delivery by appointment   Description: 2011 Scania R480 6x2 hook truck with crane hydraulics. The gearbox was replaced at around 400,000 km. Watch video. Delivery by arrangement. Km: 650000 HK: 480 Technical approved: Yes Redpfxozdn Rcs Afwow EU-approved until: 30.09.2026 Own weight: 1 Model: R480 6x2 krokbil m/ kranhydraulikk og byttet girkasse! Se video = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2P6X2000544xxxx, mileage: 399,000 km, Year of construction: 2017, Please provide reference number upon request: 23680 Specifications: 2017 model Km: Approx. 399,000 Euro 6 6x2 320 hp Full air Wheelbase: 490/135 cm Curb weight: 17,065 kg Permitted total weight: 27,000 Max payload: 9,860 kg Falkum on construction site Length of the plane: approx. 6.30 m Rjdpfx Afjzdn Smewsw Winch down: 12 tons Winch up: 6.7 tons Counterweight: owner believes it is somewhere between 1,000-1,500 kg Glasses Frame for the glasses Remote control Suitable for VDZ Tires (see pictures) LED bar AC/climate Radio/DAB Delivery by appointment   Description: 2017 Scania P320 6x2 tow truck with Falkum on body, double deck, goggles and counterweight. Owner will fix some defective lights and a seal on a cylinder before sale. The owner believes the counterweight is somewhere between 1,000-1,500 kg. Delivery by arrangement. Km: 399000 HK: 319 Technical approved: Yes EU-approved until: 16.10.2026 Own weight: 17065 Total Weight: 27000 Payload: 9860 Euro: 6 Model: P320 6x2 bergingsbil m/ Falkum påbygg, dobbelt plan, brille og motvektlodd. SE VIDEO = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X4000211xxxx, mileage: 748,000 km, Year of construction: 2016, Please provide reference number upon request: 23694 Specifications: 2016 model Km: approx. 748,000 Full air Automatic Retarder Palfinger PK20002 from 2004 Timber construction with container attachments. Plan is attached to container mounts Euro 6 Length: 964 cm Width: 255 cm Wheelbase: 450/136 cm Curb weight: 12,240 kg 6x4 730 hp Trailer hitch Thousand meters Tool cabinet Bed Radio/CD Air conditioning/ac Description: Scania R730 combi car from 2016. It comes with a timber frame with container attachments. The crane is a Palfinger 20 t/m from 2004. Can be delivered within a short time. Km: 748000 HK: 730 Technical approved: Yes EU-approved until: 31.08.2026 Own weight: 12240 Total Weight: 12315 Width: 255 Length: 964 = More information = Please contact ATS Norway for more information Rodpfjzdn Egsx Afwew

Condition: used, machine/vehicle number: YS2R6X2000125xxxx, mileage: 593,000 km, Year of construction: 2000, Please provide reference number upon request: 23078 Specifications: Not EU approved Model year: 2000 Mileage: approx. 593,000 km Manual transmission Steel suspension Tires (see photos) 20T Joab hook with articulated arm Length: 845 cm Width: 250 cm Wheelbase: 470/134 cm Net weight: 12,760 kg 419 hp Trailer hitch Bed Radio/CD Climate control / AC Description: Redoy Hctaspfx Afwjw Scania 124G hooklift truck from 2000. Equipped with a 20T Joab hook with articulated arm. See video of it in operation. The front axle has been overhauled. The truck is not EU approved, so some investment/repairs should be expected. There is an electrical fault affecting power to the tachograph. Some hoses on the hook system are worn. Can be delivered on short notice. Km: 593000 HK: 418 Technical approved: no EU-approved until: 30.09.2014 Own weight: 12760 Width: 250 Length: 845 Model: 124G Krokbil - Joab krok med knekk = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2P6X2000218xxxx, mileage: 205,000 km, Year of construction: 2021, Please provide reference number upon request: 21867 Specifications: EU approved until 01.07.2026 Mileage: 210,000 km Transmission: Automatic Rodpfx Aoxypr Hofwow Engine brake Euro 6, 370 hp Tires (see photos) Washing system JOAB Zoeller body Rear-view camera 6x2 Serviced under a gold maintenance contract since new Water tank: 1,200 liters Video attached Radio/CD Climate control/AC Ready for delivery Description:Well-maintained Scania waste collection truck with washing system.Equipped with JOAB body and a 1,200-liter water tank.Serviced under a gold maintenance contract since new.Ready for delivery. Km: 205000 Technical approved: Yes EU-approved until: 01.07.2026 Own weight: 16200 Total Weight: 30000 Payload: 13725 Width: 255 Length: 892 Euro: 6 Model: P370 Renovasjonsbil m/ Vaskeanlegg. SE VIDEO Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X2000203xxxx, Year of construction: 2008, Please provide reference number upon request: 20816 Specifications: - 2008 model - Km: approx. 479,000 - Engine brake - Suspension: air - Euro 4 - 3 axles - Wheelbase: 470/135 cm - Zepro lift - Tires (see pictures) - Tool cabinet - Rotary beam - Rear view camera - Remote control for lift - AC/climate - Bed - Ready for delivery Rsdpfowvyxfjx Afwjw Description: 2008 Scania R480 3 axle container truck with lift. Sold without container. Container can be included for an additional price. Ready for delivery. HK: 480 Technical approved: Yes EU-approved until: 18.02.2027 Own weight: 10370 Payload: 16555 Model: R480 3 akslet conatinerbil m/ lift = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X2000206xxxx, mileage: 880,000 km, Year of construction: 2012, Please provide reference number upon request: 23167 Car specifications: Rsdpfxoy I Nkns Afwsw 2012 model Km: approx. 880,000 Automatic Tires (see pictures) Backward tip New GHH Blower Compressor in 2024 Length: 928 cm Width: 255 cm Wheelbase: 430/136 cm Curb weight: 13,300 Max. truck combination weight: 66,000 kg 6x2 730 hp Cowcatcher Thousand meters 2x compressor horns 2x rotor lamps 2x bed Radio/CD Air conditioning/ac Specifications hinge: 2003 model Air suspension Tires (see pictures) Length: 1,110 cm Width: 250 cm Wheelbase: 453/136 cm Net weight: 7500 kg Backward tip Tool cabinet Description: 2012 Scania R730 tanker truck for sale with tanker trailer from 2003. There is a car and trailer tipping over backwards. A new blower compressor was installed 2 years ago. Can be delivered within a short time.   Km: 880000 HK: 730 Technical approved: no Own weight: 13300 Width: 255 Length: 928 Kw: 537 Euro: 5 Model: R730 6x2 Tankbil med Tankhenger - Bakovertipp Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2P6X2000211xxxx, mileage: 270,000 km, Year of construction: 2015, Please provide reference number upon request: 21968 Specifications: - Eu-approved until 24.09.2026 - Km: Approx. 275,000 - Transmission: Automatic - Full air suspension - Swing on 3 - Tires (see pictures) - 6x2 - NTM Body, 21.7 m3 - 1 chamber - Crane - Remote control Rsdpjx A R S Tjfx Afwsw - LPG truck - Euro 6, 344 hp - Botek Printer - Weight - Rear view camera - Radio/CD - Air conditioning/AC - Gold agreement with Scania - Ready for delivery Description: Good used Scania Renovation truck from 2015. The car runs on LPG and is equipped with a crane. Weight doesnt work, unknown reason.  1 chamber NTM body. It is Eu-approved and has a gold agreement with Scania. Ready for delivery. Km: 270000 HK: 344 Technical approved: Yes EU-approved until: 24.09.2026 Own weight: 17100 Total Weight: 27000 Payload: 9825 Width: 255 Length: 920 Euro: 6 Model: P340 = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X4000217xxxx, mileage: 295,000 km, Year of construction: 2020, Please provide reference number upon request: 23605 Truck Specifications: Mileage: 295,000 km Transmission: Automatic Retarder Full air suspension Euro 6, 650 hp Good tires 6x4 Istrail tipper body Heated body Rear-view camera Only one driver since new Upgraded sound system Leather seats Trailer hitch VBG coupling Rodozck Ipjpfx Afwsw Refrigerator Maximum payload: 16,235 kg Air horn Sleeper bed Radio/CD Climate control/Air conditioning Service agreement Trailer Specifications: 2020 Istrail Tri-Axle Trailer 3 axles Lift axle on the 1st and 3rd axle Air suspension Good tires Maximum payload: 20,200 kg Description: 2020 Scania R650 tipper truck with a 2020 Istrail tri-axle trailer. Ready for immediate delivery. Km: 295000 HK: 649 Technical approved: Yes EU-approved until: 11.06.2027 Own weight: 13690 Total Weight: 30000 Payload: 16235 Width: 255 Length: 756 Euro: 6 Model: R650 6x4 Tippbil m/ 2020 Istrail Trippelkjerre Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2P8X4000200xxxx, mileage: 330,000 km, Year of construction: 2004, Please provide reference number upon request: 23550 Specifications: Rsdpfxozbgxbe Afwow 2004 model Approx. 330,000 km Manual transmission Suspension: Parabolic springs front, air suspension rear Tires (see photos) Palfinger PK29002 crane (2005 model) Hooklift system Winch Hooklift container, approx. 700 cm Flatbed included Length: 963 cm Width: 255 cm Wheelbase: 430/136 cm Unladen weight: 17,940 kg 8x4 420 hp Toolbox Slirej sand spreaders Trailer hitch Reversing camera Beacon light bar Radio/CD Climate control / A/C Description: Scania P124 tridem hooklift and crane truck. The vehicle is supplied with the container shown in the photos as well as an additional flatbed. Delivery by agreement. Km: 330000 HK: 420 Technical approved: Yes EU-approved until: 31.01.2027 Own weight: 17940 Width: 255 Length: 963 Model: P124 Tridem Krok/Kranbil - Krokkasse og flak. Gearbox: Manual = More information = Please contact ATS Norway for more information