Used Scania Trucks With Beverage Body for sale (1,968)

Condition: used, machine/vehicle number: YS2R6X2000211xxxx, mileage: 506,000 km, Year of construction: 2015, Please provide reference number upon request: 23258 Specifications: Inspection report with defects available Mileage: approx. 506,000 km Transmission: Automatic Full air suspension Retarder Tires: see photos 6x2 with steering on 3rd axle JOAB body 20T hook lift Euro 6, 581 hp Extra front lights Trailer hitch VBG coupling Sleeper cab Wheelbase: 450 cm Radio/CD Climate control / AC Service and maintenance carried out by local workshop Ready for delivery Description: 2015 Scania R580 6x2 hook lift truck.Inspection report with defects is available.Equipped with JOAB body and 20T hook lift. Km: 506000 HK: 580 Technical approved: no EU-approved until: 31.01.2025 Own weight: 10660 Total Weight: 30000 Payload: 19265 Width: 255 Length: 836,5 Euro: 6 Model: R580 6x2 Krokbil m/ JOAB påbygg. Rep objekt Gearbox: Automatic = More information = Iodpjzqmf Eefx Abqeig Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R8X4000212xxxx, mileage: 430,000 km, Year of construction: 2017, Please provide reference number upon request: 24245 General Model year: 2017 Make/Model: Scania R730 Engine: Euro 6, 730 hp Drive configuration: 8x4 First registered: 20.01.2017 Information Mileage: 430,000 km Transmission: Automatic Suspension: Full air suspension Retarder Tyres: See photos Steering on 4th axle Straight exhaust Body/Hook System JOAB body 24-ton hook-lift system Non-articulated hook 2025 hook-lift container – 5.2 metres Hydraulic tailgate Remote control 2 owners Crane 2016 HIAB 244 E-6 HIPRO crane 24 tm Approved Number of extensions: 6 hydraulic extensions Reach: 16.1 m Crane load chart Remote control Prepared for rotator and grab Dimensions and Weight Length: 967 cm Wheelbase to 2nd axle: Wheelbase to 3rd axle: Kerb weight: 19110 kg Maximum payload: 17815 kg Description Scania R730 8x4 Tridem hook/crane truck. The truck is equipped with a 24 tm HIAB crane and a 24-ton JOAB hook-lift system. The last service was carried out at 415,000 km. The next service is due in 10,000 km. The truck was covered by a service agreement until 2024. Since then, all servicing has been carried out in-house. Km: 430000 HK: 730 Technical approved: Yes EU-approved until: 30.11.2026 Own weight: 19110 Total Weight: 37000 Payload: 17815 Width: 255 Length: 967 Iiodpfxjzyql Io Abqsg Euro: 6 Model: R730 8x4 Tridem Krok/Kranbil m/ Kasse og Rakrør. SE VIDEO Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: XLER8X4000516xxxx, mileage: 600,000 km, Year of construction: 2007, Please provide reference number upon request: 24177 Iijdpfx Abjzyqw Rsqsg General: Model year: 2007 Make/model: Scania R500 Euro 4, 500 hp First registered: 23 February 2007 Information: Mileage: approx. 600,000 km Transmission: Manual Suspension: Parabolic suspension at the front, air suspension at the rear Good tyres (see pictures) Overhauled tipping cylinder New batteries The platform/body is not included Equipment: Body system: AJK Remote control Steering on the 4th axle Dimensions and weight: Length: 860 cm Wheelbase to 2nd axle: 335 cm Wheelbase to 3rd axle: 135 cm Kerb weight: 14,380 kg Maximum payload: 17,545 kg Description: 2007 Scania R500 Tridem hooklift truck. New batteries, overhauled tipping cylinder and new hydraulic hose on the 4th axle. The truck is ready for delivery. Km: 600000 HK: 500 Technical approved: Yes EU-approved until: 30.03.2027 Own weight: 14380 Total Weight: 32000 Payload: 17545 Width: 255 Length: 860 Euro: 4 Model: R500 Tridem Krokbil Gearbox: Manual = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2K4X2000188xxxx, mileage: 246,601 km, Year of construction: 2013, Please provide reference number upon request: 24461 Specifications Model year: 2013 EU inspection valid until: 13 October 2026 Mileage: 246,601 km Transmission: Manual Drivetrain: 4x2 Emission standard: Euro 5 Engine power: 320 hp Length: 1,200 cm Width: 255 cm Kerb weight: 12,045 kg Permitted gross vehicle weight: 18,000 kg Tyres: See photos Suspension: Full air suspension Seating capacity: 46 + 1 Standing capacity: 18 Overall height: 3.55 m Alcohol interlock Service history Normal wear and tear Air conditioning Radio Lights Video system Ready for delivery Description The bus is currently in weekly operation, so the mileage may increase slightly. All servicing has been carried out by Scania, and service history is available from Scania. The alcohol interlock is functioning, but the display is black. According to the owner, the bus has normal wear and tear for its age and use. Ready for delivery. Km: 246601 HK: 319 Technical approved: Yes Iiodpfx Aoz Dflhsbqsg EU-approved until: 13.10.2026 Own weight: 12045 Total Weight: 18000 Width: 255 Length: 1200 Kw: 235 Euro: 5 Model: Omni Express 4x2 Buss m/ sitteplasser til 46+1 Gearbox: Manual Number of seats: 47 = More information = Field of application: Freight transport Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X4000214xxxx, mileage: 353,000 km, Year of construction: 2018, Please provide reference number upon request: 24014 General: Year: 2018 Make/Model: Scania R650 Euro 6, 650 hp Drive: 6x4 First registered: 25.04.2018 Specifications: Iisdsztuzajpfx Abqog Mileage: 353,000 km Transmission: Automatic Suspension: Steel suspension front and air suspension rear Retarder Good tyres Hydraulic system Air horn Dimensions and weights: Length: 666 cm Wheelbase: 315 cm Unladen weight: 12,830 kg Maximum payload: 17,095 kg Trailer: 2018 Maur Tipping Semi-Trailer 3 axles Lift axle on 1st and 3rd axle Steering axle on 3rd axle Sliding axles Tyres, see pictures Unladen weight: 10,520 kg Maximum payload: 35,480 kg Description: 2018 Scania R650 tractor unit for sale together with a 2018 Maur tipping semi-trailer. Both the truck and trailer are from 2018. Servicing has been carried out both by the owner and at a local workshop. The owner believes the last service was carried out in April. Ready for delivery. Km: 353000 HK: 649 Technical approved: no EU-approved until: 28.08.2026 Own weight: 12830 Total Weight: 30000 Payload: 17095 Width: 255 Length: 666 Euro: 6 Model: R650 6x4 Trekkvogn m/ 2018 Maur Tippsemi. SE VIDEO Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X4000209xxxx, mileage: 665,000 km, Year of construction: 2014, Please provide reference number upon request: 24036 General Model year: 2014 Make: Scania R580 Euro 6, 581 hp Drive configuration: 6x4 First registered: 11 July 2014 Information Iijdpfxezt Hwmo Abqsg Mileage: 665,000 km (may increase) Transmission: Automatic Suspension: Steel suspension at the front and air suspension at the rear Retarder Good tyres Equipped for snow ploughing Body: Zetterbergs Heated tipper body, minor fault with the heating Sand spreaders Trailer coupling, VBG Dimensions and Weight Length: 782 cm Wheelbase: 350 cm Kerb weight: 14,370 kg Maximum payload: 15,555 kg Notes / Known Faults Crack in the windscreen LED light bar and front light bar will be removed Description 2014 Scania R580 6x4 tipper truck. Equipped with a Mahler snow plough mounting plate. Servicing has been carried out by the owner. According to the owner, the last service was performed in autumn 2025. Video available. Km: 665000 HK: 580 Technical approved: Yes EU-approved until: 27.09.2026 Own weight: 14370 Total Weight: 30000 Payload: 15555 Width: 255 Length: 782 Euro: 6 Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R8X4000220xxxx, mileage: 77,500 km, Year of construction: 2024, Please provide reference number upon request: 23970 Specifications: EU-approved until 21 November 2026 2024 model Mileage: approx. 77,500 km Automatic transmission Full air suspension Tyres (see photos) Euro 6 Palfinger T22 hooklift, non-articulated Telescopic hook arm/hook tower Front wall with a vertical 150-litre hydraulic tank and sleeves for locking pins for a crane platform Hook height: 1,450 mm Snow plough equipment Retarder Hub reduction Length: 900 cm Width: 255 cm Wheelbase: 355/135 cm Kerb weight: 14,100 kg 8x4 660 hp Trailer hitch Reversing camera Bull bar with auxiliary driving lights included Auxiliary driving lights Iodozrr Dcjpfx Abqsig Air horns Rotating beacon Sleeper cab Refrigerator Radio/CD Air conditioning   Description: 2024 Scania R660 tridem hooklift truck with only 77,000 km. The truck is equipped with a Palfinger T22 Tech 5 hooklift system. The truck comes with two front-end setups: a summer front with bull bar and a winter front with snow plough mounting plate. Tipper body and flatbed can be included at an additional cost. The truck has been covered by a comprehensive service agreement since new. Can be delivered at short notice. See video. Km: 77500 HK: 659 Technical approved: Yes EU-approved until: 21.11.2026 Own weight: 14100 Width: 255 Length: 900 Euro: 6 Model: R660 Brøyterigget Tridem Krokbil - 24T Palfinger krok Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2P6X2000128xxxx, mileage: 675,000 km, Year of construction: 2002, Please provide reference number upon request: 24030 General Year: 2002 Make/Model: Scania P114 Euro 3, 381 hp Drive configuration: 6x2 First registered: 31 December 2002 Information Mileage: 675,000 km Transmission: Automatic with clutch Engine brake Air suspension Tyres: See pictures Zepro tail lift, 2,000 kg capacity Dimensions and Weight Length: 1,008 cm Wheelbase: 490 cm Kerb weight: 9,500 kg Maximum payload: 17,425 kg Description 2002 Scania P114 container truck. Service and maintenance have been carried out in-house. Ijdpfszt Hv Nsx Abqoig Km: 675000 HK: 380 Technical approved: no EU-approved until: 31.08.2024 Own weight: 9500 Payload: 17425 Model: P114 Containerbil m/ Løftelem. = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2S6X2000563xxxx, mileage: 476,128 km, Year of construction: 2021, Please provide reference number upon request: 23456 Specifications: 2021 model Mileage: 476,128 EU approved until: 06.10.26 Euro 6 Automatic Retarder Axle 1 to 2: 315 cm Payload: 18,270 kg Tires (see pictures) Suspension: air Movable fifth wheel 6x4 540 hp Refrigerator 2 bunks Diesel heater Radio Air conditioning Lights Iiodpfx Abszqrxkeqjg Delivery by agreement Description: We have a 2021 Scania S540 6x4 tractor with ADR approval and silver agreement for sale. The vehicle is under a silver agreement with Scania and is very well maintained. Everything works as it should according to the owner. Delivery by agreement. Km: 476128 HK: 539 Technical approved: Yes EU-approved until: 06.10.2026 Own weight: 9730 Total Weight: 28000 Payload: 18270 Width: 255 Length: 684 Kw: 397 Euro: 6 Model: S540 6x4 trekkvogn m/ ADR godkjenning og sølvavtale Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X2000203xxxx, Year of construction: 2008, Please provide reference number upon request: 20816 Specifications: - 2008 model - Km: approx. 479,000 - Engine brake - Suspension: air - Euro 4 - 3 axles - Wheelbase: 470/135 cm Iiedpfx Abszqlg Ijqsg - Zepro lift - Tires (see pictures) - Tool cabinet - Rotary beam - Rear view camera - Remote control for lift - AC/climate - Bed - Ready for delivery Description: 2008 Scania R480 3 axle container truck with lift. Sold without container. Container can be included for an additional price. Ready for delivery. HK: 480 Technical approved: Yes EU-approved until: 18.02.2027 Own weight: 10370 Payload: 16555 Model: R480 3 akslet conatinerbil m/ lift = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R8X4000219xxxx, mileage: 251,000 km, Year of construction: 2023, Please provide reference number upon request: 22510 Specifications: • 2023 model• Km: approx. 251,000 (22.04.2026)• Automatic transmission• Tires (see photos)• Body from 2023• Jonsred J1088S timber crane from 2018• Retarder• Trailer hitch• Euro 6• Length: 1,066 cm• Width: 255 cm• Wheelbase: 320/135 cm• Curb weight: 13,400 kg• 8x4• 770 hp• Bull bar• Damage on right side (see photos)• Auxiliary high-beam lights• 2x air horns• Bed• Refrigerator• Radio/CD• Climate control / AC Description:Scania R770 Tridem timber truck from 2023. Equipped with a 2018 Jonsred J1088 timber crane. The truck is on a service agreement Brand new clutch.There is damage on the right side, shown in the photos.Can be delivered within short time. Km: 251000 HK: 769 Technical approved: no EU-approved until: 24.03.2026 Isdpfx Aozqrf Rsbqeig Own weight: 13400 Total Weight: 36000 Payload: 22525 Width: 255 Length: 1066 Euro: 6 Model: R770 Pusher Tømmerbil m/ Jonsred J1088 kran Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2G6X2000209xxxx, mileage: 853,000 km, Year of construction: 2013, Please provide reference number upon request: 21770 Specifications: Iijdpfx Aozqru Esbqjg Model year: 2013 Mileage: approx. 853,000 km Automatic transmission Tires (see photos) Tipping hydraulics Euro 5 Length: 680 cm Width: 255 cm Wheelbase: 310/131 cm Curb weight: 8,300 kg 6x2 480 hp Sleeper bed Radio/CD Air conditioning (AC) Description:Scania G480 tractor unit with tipping hydraulics.The truck is not EU-approved, so some maintenance or repairs should be expected.Available for quick delivery. Km: 853000 HK: 480 Technical approved: no EU-approved until: 30.04.2025 Own weight: 8300 Total Weight: 27000 Payload: 18625 Width: 255 Length: 680 Euro: 5 Model: G480 6x2 Trekkvogn m/ tipp hydraulikk Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X4000220xxxx, mileage: 78,000 km, Year of construction: 2025, Please provide reference number upon request: 23299   Specifications: • 2025 model• Approx. 78,000 km• Automatic transmission• Tires (see photos)• Euro 6• Galvanized body• Flatbed length: approx. 625 cm• Overall length: 975 cm• Width: 255 cm• Wheelbase: 435/135 cm• Unladen weight: 15,760 kg• 6x4• 660 hp• Trailer hitch• Tool cabinet• Raised roof cab• Auxiliary driving lights• Rotating beacon bar• 2x air horns• 2x beds• Radio/CD• Climate control / AC Crane specifications: • Manufactured in 2019• 23 tonne/metre• Crane load chart• 5 hydraulic extensions• Low crane hours Iisdpfezqlp Nsx Abqjg Description: Scania R660 6x4 flatbed truck with rear-mounted HMF crane. Both the truck and crane are delivered ready for operation. The truck is covered by a gold service agreement. Additional interior accessories are not included. Available for delivery on short notice. Km: 78000 HK: 659 Technical approved: Yes EU-approved until: 30.06.2027 Own weight: 15760 Year controlled until: 06.2026 Width: 255 Length: 975 Euro: 6 Model: R660 6x4 Planbil m/ bakmontert 23 t/m HMF kran Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2000, Please provide reference number upon request: 23321   Specifications: • 2000 model• Arka body• Approx. 10 cubic meter tank (tank is not bolted down)• Previously used as a beer truck for Hansa Borg Bryggerier• Starts and runs• More information to follow Iijdszqrabjpfx Abqog Own weight: 1 Model: 114 med tank = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X2000209xxxx, mileage: 827,744 km, Year of construction: 2014, Please provide reference number upon request: 24345 General: Model year: 2014 Brand: Scania R580 EU-approved until 17.03.27 Euro 6, 581 hp Drive configuration: 6x2 First registered: 17.06.2014 Info: Mileage: 827,744 (will increase slightly) Transmission: Automatic Suspension: Air suspension Retarder Tires (see pictures) Refrigerator Air conditioning Isdpszy Nnzsfx Abqsig Radio Dimensions and weight: Length: 720 cm Axle distance to second axle: 330 cm Axle distance to third axle: 131 cm Curb weight: 10,050 kg Max payload: 17,875 kg Notes/Known issues: Errors and defects may occur. Some signs of use should be expected. Description: We have a 2014 Scania R580 6x2 with hydraulics. All services have been carried out regularly by the owner. It has previously been on a service contract with Scania. Is in weekly operation, so the mileage will increase slightly. Ready for delivery. Km: 827744 HK: 580 Technical approved: Yes EU-approved until: 17.03.2027 Own weight: 10050 Total Weight: 28000 Payload: 17875 Width: 255 Length: 720 Kw: 427 Euro: 6 Model: R580 6X2 trekkvogn m/hydraulikk Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2PH6X2Z0113xxxx, mileage: 420,000 km, Year of construction: 1989, Please provide reference number upon request: 23675 Specifications: 1989 model Km: approx. 420,000 Wheelbase: 420/135 cm 282 hp Spring: steel 2001 HIAB144D-5 DUO crane Laxo fastening Tip at the cash register Summer tires The box is welded enough to go through the EU Manual AC/climate Bed Radio Ready for delivery at the end of June   Description: Iiedpszqlktjfx Abqsg 1989 Scania P93H crane truck/ with 14 t/m crane and Laxo attachment and tipper on the box. The photos were taken before the EU inspection, the owner has welded the car enough to go through the EU, but he says there is welding work left to get it properly in order. The car comes with summer tires, in somewhat uncertain condition. Winter tires can be added for an additional price. It is possible to fit a turntable on the car, but this is not included. The owner believes the box is about 5 meters. Ready for delivery at the end of June. Km: 420000 HK: 281 Technical approved: Yes EU-approved until: 01.05.2027 Own weight: 14165 Model: P93H kranbil med 14 t/m kran og Laxo feste og tipp på kassen. Nylig EU-godkjent. SE VIDEO Gearbox: Manual = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R8X2000215xxxx, mileage: 191,000 km, Year of construction: 2019, Please provide reference number upon request: 22360 Truck specifications: • EU-approved until 13.08.2026• Model year: 2019• Mileage: approx. 195,000 km• Opticruise• Tyres (see photos)• Retarder• Platform length: approx. 630 cm + 120 cm extension• Outriggers• Boat supports• Factory-new engine• Hydraulic underrun protection• Euro 6• Length: approx. 1,100 cm• Width: approx. 255 cm• Wheelbase: 199 / 316 cm• Unladen weight: approx. 25,740 kg• Drive: 8x2• Engine output: 581 hp• Tool boxes• Reversing camera• Trailer coupling• Light bar• 2 air horns• 2 sleeping berths• Refrigerator• Radio/CD• Climate control / A/C Crane specifications: • Hiab X-HIPRO 858• Model year: 2018• Certified until 11.2026• Total hours: approx. 6,196• Crane hours: approx. 2,172• Load chart• Jib• Winch• Outreach: 8 hydraulic + 6 on jib + 1 manual• Reach: approx. 36 metres• Remote control Description:Scania R580 crane truck equipped with an 85 t/m Hiab crane with jib and winch. The crane features 8 hydraulic extensions, 6 extensions on the jib and one manual extension, giving a total reach of approx. 36 metres.Platform length is approx. 630 cm with a 120 cm hydraulic extension.The truck is fitted with a factory-new engine that has seen very little use since installation.Both truck and crane are approved, and the vehicle is reinforced.Available for delivery at short notice.See video! Iijdpfjzqlpvjx Abqog Km: 191000 HK: 580 Technical approved: Yes EU-approved until: 13.08.2027...

Condition: used, machine/vehicle number: YS2R6X2000553xxxx, mileage: 165,000 km, Year of construction: 2019, Please provide reference number upon request: 22359 Specifications: EU-approved 26.09.2026 Model year: 2019 Mileage: Approx. 170,000 km Transmission: Automatic Tires: See pictures Iisdpjzqlmhofx Abqeg Emissions: Euro 6 Flatbed length: Approx. 630 cm Total length: 1,096 cm Width: 255 cm Wheelbase: 475/135 cm Towbar: Yes Reversing camera: Yes Stabilizing legs: Yes Drive: 6x2 Engine power: 500 hp Bullbar: Yes LED bar: Yes Toolbox: Yes Bed: Yes Radio/CD: Yes Climate/AC: Yes Crane Specifications: Crane: Hiab 477E-7 Hipro from 2019 Approved to nov 2026. Hours: approximately 3000 Outreach: 7+6 Jib: Yes Crane diagram: Yes Remote control: Yes Description: 2019 Scania R500 6x2 crane truck with a Hiab 47 t/m crane and 7+6 outreach, equipped with a jib. The flatbed length is 630 cm. Quick delivery available. Km: 165000 HK: 500 Technical approved: Yes EU-approved until: 26.09.2027 Own weight: 20374 Total Weight: 30000 Year controlled until: 11/26 Payload: 9551 Width: 255 Length: 1096 Euro: 6 Model: R500 6x2 kranbil m/ 47 t/m Hiab kran med jibb. Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2P6X2000218xxxx, mileage: 207,000 km, Year of construction: 2021, Please provide reference number upon request: 21867 Specifications: Mileage: 207,000 km (16.09.2026) Transmission: Automatic Engine brake Euro 6, 370 hp Tires (see photos) Washing system JOAB Zoeller body Rear-view camera 6x2 Serviced under a gold maintenance contract since new Water tank: 1,200 liters Video attached Radio/CD Climate control/AC Ready for delivery Description:Well-maintained Scania waste collection truck with washing system.Equipped with JOAB body and a 1,200-liter water tank.Serviced under a gold maintenance contract since new.Ready for delivery. Km: 207000 Technical approved: Yes EU-approved until: 01.07.2027 Own weight: 16200 Total Weight: 30000 Payload: 13725 Width: 255 Length: 892 Euro: 6 Iedpfozqryzox Abqjig Model: P370 Renovasjonsbil m/ Vaskeanlegg. SE VIDEO Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X2000217xxxx, mileage: 626,000 km, Year of construction: 2021, Please provide reference number upon request: 24284 General: Year: 2021 Make: Scania R540 EU-approved until 18.03.2027 Euro 6, 540 hp Wheel drive: 6x2 First registered: 18.03.2021 Information: Ijdpfszyr S Njx Abqsig Mileage: 626,000 km (will increase) Transmission: Automatic Suspension: Full air suspension Retarder Tyres, see pictures Reversing camera Dimensions and Weight: Length: 729 cm Wheelbase: 335/130 cm Kerb weight: 9,820 kg Maximum payload: 18,180 kg Description: Scania R540 tractor unit with Stiholt body. The truck is EU-approved until March 2027. The tractor unit is currently in operation, so the mileage will increase somewhat. Can be delivered at short notice. Km: 626000 HK: 539 Technical approved: Yes EU-approved until: 18.03.2027 Own weight: 9820 Payload: 18180 Length: 729 Euro: 6 Model: R540 6x2 Trekkvogn - Stiholt Påbygg Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: XLER6X2000512xxxx, Year of construction: 2005, Please provide reference number upon request: 24166 Specifications: 2005 model Not EU approved Manual transmission Last EU approved until: 21.09.25 Repair object Iedpjzyrr Aefx Abqsig Defects and deficiencies Tires (see pictures) 579 hp Euro 3 3 compartments in tank 14000 liters Air conditioning Lights Radio Delivery ready Description: We have a 2005 Scania R580 tanker truck repair object with a 3-compartment tank of 14000 liters for sale. The vehicle is not EU approved and has defects and deficiencies, hence it is sold as a repair object. The vehicle starts and runs. Batteries in poor condition will be installed before it is sold. Delivery ready HK: 579 Technical approved: no EU-approved until: 21.09.2025 Own weight: 12920 Total Weight: 27000 Payload: 14005 Width: 255 Length: 900 Kw: 426 Euro: 3 Model: R580 tankbil Rep.Objekt m/ 3 roms tank på 14000 liter Gearbox: Manual = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X2000204xxxx, mileage: 870,000 km, Year of construction: 2009, Please provide reference number upon request: 23419 Truck Specifications: 2009 model EU-approved until: 30.08.26 Mileage approx: 870,000 Manual transmission 6x3 Retarder Euro 5 480 hp Tires (see pictures) Front suspension: steel Rear suspension: air 2 beds Diesel heater Air conditioning Radio Lights Ready for delivery Trailer Specifications: 2008 model Ijdpfx Ajzqrvvsbqjig EU-approved until: 30.08.26 3-axle Tires (see pictures) Lift on 1 axle Axle 1 to 2: 290 cm Payload: 18,315 kg Full side opening on both sides Sliding roof Interior width: 2.538 m Interior length: 13.614 m Interior height: 2.844 m Lashing points Ready for delivery Description: We have a 2009 Scania R480 6x2 tractor with a 3-axle Krone Profi Liner Nordic tarpaulin trailer for sale. Everything works as it should according to the owner. Services have been carried out regularly. The mileage may increase slightly as it is in weekly operation. This set is sold together. Ready for delivery. Km: 870000 HK: 480 Technical approved: no EU-approved until: 30.08.2026 Own weight: 8610 Total Weight: 27000 Payload: 18315 Width: 255 Length: 660 Kw: 353 Euro: 5 Model: R480 6x2 trekkvogn m/ 3 akslet krone profi liner nordic kapelltralle Gearbox: Manual = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R8X2000211xxxx, mileage: 256,000 km, Year of construction: 2016, Please provide reference number upon request: 22729 Car specifications: EU approved until 31.08.2027 2016 model Km: approx. 256,000 Opticruise Tires (see pictures) Retarder 4 hydraulic boat supports Combiplane Length on plan: approx. 670 cm 70 cm extension Iijdpjzqlpijfx Abqog Laxo sleeves Euro 6 Length: 1,161 cm Width: 255 cm Wheelbase: 194/336 cm Curb weight: 24,690 kg 8x2 581 hp Heating in two cabinets Trailer hitch 2x rotor lamp Work light Small dent on the roof, shown in pictures Interior heater Bed Radio/CD Air conditioning/ac   Crane specifications: Certified until 06.2026 2015 model Fassi F820, 80 t/m 6 Hydraulic extensions 6 hydraulic jibs 3 manual Crane hours: approx. 1715 Remote control Crane diagram Jib Winch Range: approx. 32 meters Description: Scania R580 8x2 Crane truck from 2016. Both the car and the crane are approved. Services have been carried out at a reputable workshop. The car is equipped with an 80 t/m Fassi crane with jib and winch. Crane has only had 1715 hours. It is a combi plane that can be easily removed. Can be delivered within a short time. Watch video.   Km: 256000 HK: 580 Technical approved: Yes EU-approved until: 31.08.2027 Own weight: 24690 Width: 255 Length: 1161 Kw: 427 Euro: 6 Model: R580 8x2 Kranbil - 80 t/m Fassi kran m/ jibb og vinsj = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2G6X2000569xxxx, mileage: 50,000 km, Year of construction: 2024, Please provide reference number upon request: 24194 General Model year: 2024 Make: Scania G410 Euro 6, 411 hp Drive configuration: 6x2 First registered: 26.01.2024 Information Mileage: 50,000 km Gearbox: Automatic Suspension: Full air suspension Engine brake/retarder Good tyres CNG Body Iiodozyquispfx Abqog Body type: Multilift 21-ton hooklift Remote control Equipment Machine flatbed from the hooklift body is included Dimensions and weight Length: 821 cm Wheelbase to 2nd axle: 435 cm Kerb weight: 12,500 kg Maximum payload: 15,425 kg Notes The container currently mounted on the truck is not included. Description 2024 Scania G410 6x2 hooklift truck. Service history with Scania. CNG gas. Km: 50000 HK: 410 Technical approved: Yes EU-approved until: 25.11.2026 Own weight: 12500 Total Weight: 28000 Payload: 15425 Width: 255 Length: 821 Euro: 6 Model: G410 6x2 Krokbil m/ Maskinflak – CNG – 50 000 km! Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X4000208xxxx, mileage: 580,000 km, Year of construction: 2013, Please provide reference number upon request: 23836 Specifications: Mileage: approx. 580,000 km Transmission: Automatic Full air suspension Euro 5, 620 hp Retarder Hub reduction 6x4 Hydraulics Good tires Sliding fifth wheel Wheelbase: 310 cm Unladen weight: 10,500 kg Sleeper cab Radio/CD Climate control / A/C Service history with Scania Recently completed major service Ready for delivery Description: Scania R620 6x4 tractor unit. The vehicle has recently undergone a major service. Ready for delivery. Km: 580000 HK: 620 Technical approved: Yes EU-approved until: 03.07.2027 Own weight: 10500 Total Weight: 28000 Payload: 17500 Width: 255 Length: 670 Euro: 5 Model: R620 6x4 Trekkvogn m/ hydraulikk. Gearbox: Automatic = More information = Ijdpfx Abszqrwajqoig Please contact ATS Norway for more information