All-terrain crane

Scania R540 B10x4 With CORMACH 150tm Crane Valid inspecti

Condition: used, lifting height: 36,000 mm, Year of construction: 2023, operating hours: 17,158 h, Drive: Wheel Unladen weight: 29,900 kg Serial number: 783703 Tyre condition front: 100% Tyre condition rear: 100% Psdjx Ru S Aepfx Afnspr Transport dimensions (L x W x H): 9.99 x 2.55 x 3.9 m For further information, please contact PFEIFER GROUP.

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Axles and tires: -"PENDEL-AXLE", all axles with hydromechanical forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with stopcocks and locking pin for securing in raised position Pedpfx Ash Hm Thsfnjpr -Technical axle load: 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 / 3PMSF tires Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: used, mileage: 129,252 km, lifting height: 38,000 mm, Year of construction: 2015, Drive: Wheel Unladen weight: 27,875 kg Lifting capacity: 23,800 kg Serial number: 122024 Ppsdpfx Ajw A Hb Tsfnor Front tyre condition: 70 Rear tyre condition: 70 Transport dimensions (L x W x H): 11.1 x 2.55 x 3.9 Please contact PFEIFER GROUP for further information.

Condition: used, mileage: 70,275 km, power: 390 kW (530.25 HP), first registration: 06/2021, fuel type: diesel, axle configuration: 8x8, wheelbase: 4,800 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, loading space length: 5,950 mm, loading space width: 2,470 mm, loading space height: 1,460 mm, Year of construction: 2021, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Remote central locking - Pintle hook - Hub reduction - PTO (Power Take-Off) - Radio - Reversing camera - Sun visor - Auxiliary heater - Toolbox = Notes = Mercedes-Benz Arocs 3253 8x8 Full spring suspension. 2 sets of tyres. Road: 385/65R22.5 315/80R22.5 Off-road: 14.00R20 Copma 650.6 Jib with 6 extensions. Winch. Front outriggers. Scanreco radio remote control. Personnel basket. Lifting capacities: 2.00 m - 27,520 kg 4.30 m - 12,800 kg 5.95 m - 9,070 kg 7.70 m - 6,840 kg 9.55 m - 5,380 kg 11.40 m - 4,420 kg 13.50 m - 3,680 kg 15.60 m - 3,160 kg 2 x manual extension 18.71 m - 1,720 kg 20.11 m - 1,520 kg Psdpfox S N Hkox Afnopr 21.75 m - 1,240 kg 23.46 m - 1,000 kg 25.19 m - 870 kg 26.96 m - 800 kg 28.76 m - 720 kg 80 cm hydraulic extension on loading platform. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Drum brakes Suspension: Leaf suspension Front axle 1: Steering Front axle 2: Steering Weights Empty weight: 24,855 kg Payload: 12,145 kg Gross vehicle weight: 37,000 kg Functionality Crane: Copma Financial Information Price: On request Identification Type number: AROCS 3253 8x8 / 65 t/m CRANE + = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), Govorim po russki. We strive to provide accurate information, however, no rights can be derived from the posted texts.

Condition: new, maximum load weight: 38,100 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, loading space length: 13,100 mm, loading space width: 2,480 mm, loading space height: 760 mm, suspension: air, tire size: 205/65 R17.5 3PMSF, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading area: 5 pairs of lashing rings can be folded outwards 3 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Seat posts: JOST seat posts with 2-speed gearbox for 24 t lifting capacity Axles and tires: BPW axles, two axles rigid two axles self-steering, air-sprung, with drum brake, with raise/lower function The self-steering axles with electromagnetic reverse lock can be activated via reverse gear or manually Axle tool Tires 205/65 R17.5 3PMSF Brake system: WABCO brake system in accordance with EU regulations with EBS-E Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC Ppodpfx Afstphtmenjr S690QL/S700MC Electrical equipment: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Paintwork: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component zinc dust primer A high-quality 2-component Top coat single color in MB 7350 nova grey No metallic paint finish possible Rear section metallized and painted in RAL 9010 Accessories included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 Yellow-red air couplings on the galvanized connection strip at the front 4 brake shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights Galvanized folding supports under the bevel of the cargo bed A holder for a rotating beacon at the rear of the trailer Height-adjustable tarpaulin body Galvanized bulkhead with a tensioning mechanism for the sliding curtains Height-adjustable by approx. 400 mm "EDSCHA" brand roof can be moved forwards on ALU roof rail profiles bolted to the front and rear wall 3 pairs of sliding stanchions in the loading area The body can be hydraulically widened at the rear to the left and right by approx. 750 mm Sliding roof with pivoting portal support Sliding tarpaulin with 700 mm reserve in length, with tension belts at approx. 600 mm intervals Height top edge of body approx. 3,960 mm Driving with the sliding tarpaulin open is not permitted and will damage the tarpaulin Suspension strip for ALU docking lights at the rear of the vehicle A holder for the warning signs including socket on the gooseneck and on the rear panel on the left and right respectively A mud flap at the rear of the trailer European reflector plates at the rear of the trailer 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load condition Rear body closed with ALU hinged doors A layer of sand painted onto the chequer plates on the gooseneck and on the cargo bed to prevent slipping BEKAMAX central lubrication system with NLGI-2 standard grease and removable protection around the pump Speed sticker 80 km/h at the rear and on both sides Load manometer to determine the axle loads including load diagram

Condition: used, mileage: 278,066 km, Year of construction: 2009, Drive: Wheel Unladen weight: 72,000 kg Ppedjw D N Raspfx Afnjr Lifting capacity: 150,000 kg Serial number: 068506 Front tire condition: 80% Rear tire condition: 80% Transport dimensions (L x W x H): 16.2 x 2.85 x 3.95 m Please contact PFEIFER GROUP for further information.

Condition: used, mileage: 53,318 km, lifting height: 110,000 mm, Year of construction: 2018, Intended use: Construction Drive: Wheeled Unladen weight: 60,000 kg Lifting capacity: 250,000 kg Serial number: 088666 Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.86 x 2.99 x 3.99 m Psdswz Utzepfx Afnjpr Please contact PFEIFER GROUP for further information.

Condition: excellent (used), mileage: 285,116 km, power: 368 kW (500.34 HP), first registration: 11/2019, fuel type: diesel, axle configuration: 8x4, wheelbase: 6,650 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, number of seats: 2, total length: 10,980 mm, total width: 2,540 mm, loading space length: 5,000 mm, loading space width: 2,490 mm, loading space height: 1,250 mm, Year of construction: 2019, Equipment: ABS, crane, electric window regulation, parking heater, power mirror, trailer coupling, = Additional options and accessories = - 4-AXLES - 8x2 - 8x4 - A/C - AIR CONDITION - Air suspension - Alloy wheels - Beacon(s) - Electrically operated front windows - Gullet - High Beams - Hydraulics - Lift Axle - Parabolic suspension - PTO - Refridgerator - REVERSING CAMERA - Roadworthy - Sleeping cabin - Sper - Steel spring suspension - Steering Axle - Work lamp(s) = Remarks = Condition Overhauled: × Crane Tap Length: 43.5 m Hours: 8092 uur Number of hydraulic extensions: 15 Number of manual extensions: 3 Number of support legs: 5 Number of extra functions: 1 Remote control: ✓ Load Hook: ✓ Rotator: × Squeeze Box: × Winch: ✓ Pallet Hook: × Meter capacity: 43.5 m Capacity kilo: 21500 kg Structure Construction year: 2019 = More information = General information Number of doors: 2 Cab: TGS, one and a half Registration number: 1THS342 Technical information Number of cylinders: 6 Engine capacity: 12.419 cc Engine type: MAN D2676LF51 Weights Empty weight: 28.346 kg Carrying capacity: 3.654 kg GVW: 32.000 kg Max. towing weight: 44.000 kg Functional Crane: PALFINGER PK 135.002 TEC7 + FLY-JIB PJ 150 + 3 ME ( 9 + 6 + 3 ), year of manufacture 2019 Make of bodywork: DEOM Height of cargo floor: 125 cm Extendable superstructure: Yes Maintenance APK (MOT): tested until 11/2026 Psdpfxey D Twks Afnjpr Condition Technical condition: very good Visual appearance: very good Damages: none

Condition: used, mileage: 217,300 km, first registration: 09/2005, overall weight: 45,000 kg, gearing type: mechanical, emission class: euro4, Equipment: crane, Crane: Superstructure & crane: ? Tipper: TRÖSCH 3-way tipper? Heavy-duty construction superstructure? Crane: Palfinger PK 44002 with fly jib & rope winch F? Extensions: 6+4+1 – 10x hydraulic + 1x manual? Grab connection: to the front of the jib? Inspection: Swiss SUVA certification valid until early 2027? Crane fully functional, ready for operation. Ppsdpfsym Rz Dsx Afnjr Suspension: Leaf-air

Condition: used, mileage: 45,700 km, Year of construction: 2005, Drive: wheel Unladen weight: 36,000 kg Lifting capacity: 45,000 kg Pedsyl Huwspfx Afnopr Serial number: 53517 Tyre condition front: 70% Tyre condition rear: 70% Transport dimensions (L x W x H): 11.5 x 2.7 x 3.9 m Please contact PFEIFER GROUP for further information.