Used Wecon Interchangeable Chassis / Swap Chassis for sale (66)

Condition: used, functionality: fully functional, overall weight: 16,000 kg, loading space length: 7,300 mm, loading space width: 2,480 mm, GERMAN DEALER offers: BDF platform swap body 7.45 m GALVANIZED Low frame External lashing rings Midsection lashing rings (in addition) Total of 28 lashing rings Lashing rail Craneable Loading area: 7300 mm x 2480 mm 16,000 kg gross weight Multiple units available Numerous swap bodies and drawbar trailers in stock! ##### PLEASE CALL, NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO Commercial Vehicles has been delivering since 1983! VIEWING BY APPOINTMENT ONLY! ##### Dksdpjzbibfofx Akkon

Condition: used, maximum load weight: 14,780 kg, overall weight: 18,000 kg, first registration: 11/2015, loading space length: 7,755 mm, loading space width: 2,483 mm, loading space height: 2,948 mm, loading space volume: 57 m³, suspension: air, wheelbase: 1 mm, color: grey, gearing type: other, driver cabin: other, This offer is non-binding. Subject to errors and prior sale. If a foreign currency is specified, it is calculated at the current daily exchange rate. The valid currency is the one where the vehicle is located. “MAX” swap body with lifting roof available at extra cost! Edscha sliding roof, curtainsider left and right, lifting roof over 3,000 mm. The tarpaulins are branded! Dkodeyhzy Rjpfx Akkjn

Condition: used, empty load weight: 3,800 kg, maximum load weight: 18,000 kg, first registration: 06/2000, tire size: 235/75/17,5, Year of construction: 2000, Internal No. 5094 Viewing strictly by appointment only Swap body Approved for 40 km/h Up to 80 km/h possible Suspension: • 1st axle: air suspension • 2nd axle: air suspension Brakes: • 1st axle: drum brake with spring accumulator • 2nd axle: drum brake with spring accumulator Dkjdpfx Ajy Hdwtokkjn Tyres: • 1st axle: twin wheels • 2nd axle: twin wheels • Tyre size: 235/75/17.5 • Tread depth in %: 50 % • Rim type: steel Additional equipment • Unladen weight: 3,790 kg • Payload: 14,210 kg • ABS • EBS • Number of axles: 2 • Axle manufacturer: BPW Subject to prior sale, errors and typographical mistakes excepted.

Condition: used, maximum load weight: 13,110 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2011, Equipment: ABS, Vehicle No. for customer inquiries: 185 ---- * Jumbo * Suspension: Air * Portal doors * Base color: blue, ABS, EBS, Ready to drive, Spare wheel, Support legs ----Technical data: * Air suspension * Cargo space dimensions: L: 7,690 mm W: 2,470 mm H: 3,000 mm * Payload: 13,110 kg * Tire size: 445/45 R19.5 ----Suitable tractor unit MB Actros available German vehicle! * €4,485.00 net, plus VAT * TÜV (MOT/emission test) valid until 05/2026 - Inspection due 11/2026 * In the event of export to third countries or the EU, a deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. Dsdpfx Akswc Hf Sskjkn * This description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense. * The information does not claim to be complete. The information/descriptions/images provided are non-binding and do not serve as guaranteed characteristics. * We assume no liability for errors and obvious mistakes. * The buyer is obliged to independently verify the condition and equipment of the vehicle before purchase. * Subject to price changes, typographical errors, errors and prior sale. * Dear customer, please understand that due to the age and mileage, we prefer to sell the vehicle to commercial businesses or dealers. Thank you very much. * We speak: * Greek / Miláme Elliniká Tel: +49.162.6567750 * Russian / My govorim na Russkom Tel: +49.171.2767737 * WhatsApp/Viber: Tel: +49.162.6567750 * E-mail: * * Internal number: 185

Condition: used, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 07/2020, Visit our website, where you will find our complete inventory with many more photos and information in several languages. SEL 8545 Wecon APS218 Lift axle / Aluminum rims German registration / 1st owner Registration date: 07/13/2020 Technically permissible total weight (kg): 30,000 Permissible total weight (kg): 30,000 Unladen weight (kg): 6,250 VIN: W09APS218LAW35122 MOT: 08.2026 / Inspection: 02.2027 Dksdpfxey T A Rro Akkon TIRES AND AXLES: Tires: 385/65 R 22.5 Axle configuration: 2 SAF axles 1st axle: Liftable Air suspension Disc brakes Aluminum rims BODY Internal dimensions: Height (m): 2.72 (2.64) Width (m): 2.48 Length (m): 9.80 OTHER SPECIFICATIONS: Swinging doors EDSCHA VEHICLE DOCUMENTS: Registration certificate Vehicle title Additional documents available upon request for an extra charge. M. BUFANO m. (Italian, English, German) J. CORDEIRO j. (Portuguese, Spanish, Italian, English) J. MARJANOVIC j. (German, Bosnian) L. OBODYNSKA Ukrainian/?????, Russian/??-?????) We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Although every effort has been made to ensure the accuracy of the information, we cannot be held responsible for any errors or omissions. We kindly ask our customers to consult the available photos. The specified dimensions are approximate values. Our vehicles are sold as is, in their current condition. We invite customers to visit our company to personally inspect the condition of the vehicle. We also offer the possibility of a test drive. It is important to note that the batteries supplied with the vehicle are those currently installed. If the customer wishes for new batteries, we will provide price information.

Condition: used, first registration: 10/2005, overall weight: 16,000 kg, empty load weight: 3,500 kg, color: white, gearing type: other, emission class: none, maximum load weight: 12,500 kg, suspension: other, loading space volume: 57 m³, loading space length: 7,700 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, driver cabin: other, Equipment: head guard, Wecon 7.70 m BDF Jumbo / MEGA Swap Body * Fixed roof, lifting function on the right side * Sliding tarpaulins left/right * Galvanized bridge frame * Rear portal doors Dkedpfx Aey R Tgfjkken * Pallet stop strips left/right * 7 lashing rings per side * 8 ALU slats currently * 5 wooden slats currently * Height-adjustable legs * Rail-loadable * Wooden floor * Loading edge: 1.13 m * Saddle height: 0.97 m * Internal dimensions: L- 7.70 m, W- 2.48 m, H- 3.00 m * Type plate and chassis number are no longer legible on the body!! * Dry and leakproof!! Subject to prior sale, errors and changes excepted! In some photos, company logos have been removed – please inquire! Functionality of extras not guaranteed! Your contact: Christoph Ott Tel. + WhatsApp:

Condition: used, axle configuration: 2 axles, loading space length: 81,500 mm, loading space width: 24,900 mm, loading space height: 30,900 mm, total width: 25,500 mm, total height: 40,000 mm, Year of construction: 2019, Equipment: ABS, = Additional Options and Accessories = - Rear air suspension - Front air suspension = Notes = Dkedpoy Rdmpefx Akkjn For inquiries regarding the vehicle, Mr. Seidel will assist you (by phone on APZ 218 Flatbed Curtainsider Trailer). Additional features: Auxiliary headlights at the rear of the vehicle, BPW axles, Knorr ABS, drum brakes, spring-loaded parking brakes, sliding roof, sliding side curtain, doors at front and rear, drive-over ramp at the front, air suspension, 50 mm towing eye, cargo area dimensions: Length: 8,150 mm, Width: 2,490 mm, Height: 3,090 mm, tire tread: 1st axle 4-9 mm, 2nd axle 8-9 mm, permitted total weight: 19,000 kg, unladen weight: 5,420 kg, payload: 13,580 kg. On request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) is happy to assist you. For further information, please visit our homepage. ... Subject to errors, changes, and prior sale !!! - = Further Information = Unladen weight: 5,420 kg Payload: 13,580 kg Gross vehicle weight: 19,000 kg For more information, please contact Tobias Ebert.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 20 ft, overall weight: 35,100 kg, maximum load weight: 32,000 kg, empty load weight: 3,100 kg, loading space volume: 33.4 m³, loading space width: 2,390 mm, loading space length: 5,820 mm, loading space height: 2,400 mm, 20ft Bulk Container / Open-Top Bulk Container – ideal for industrial, recycling, and agricultural applications. Robust, like-new special containers featuring a well-designed loading and unloading concept. Particularly suitable for all types of bulk materials and intermodal operations (road / rail / sea). Key Highlights at a Glance ✅ Large capacity: approx. 33.4 m³ ✅ High payload: approx. 32,000 kg ✅ Front swing flap for rapid discharge ✅ Rear doors + open top with tarpaulin cover ✅ CSC-certified (DEKRA) → Suitable for maritime transport ✅ Stackable & craneable (20ft standard) ✅ Multiple units available immediately Multiple units available / larger quantities on request. Main Applications: - Recycling - Agriculture - Scrap metal - Building materials Equipment features: Corner castings top and bottom (20ft standard, craneable and stackable) Double rear swing doors Each with two external locking rods All-around rubber seal Fixed rear cross member Front swing flap Height approx. 2,000 mm Opening width approx. 2,250 mm Locking via external locking rods All-around rubber seal Safety lock for the swing flap (side release) 🏗️ Construction / Special Features Standard: Open top with removable steel roof, steel roof with forklift pockets. Dksdoy Ic Ndjpfx Akksn Alternative: Open top version with roll-up tarpaulin Secured on one side with straps Opposite rolling system (square tube) Additional securing via 3 tensioning ratchets Tarpaulin mounted below the corner castings 1 removable cross beam to support the tarpaulin (centered) Continuous hooks on the upper interior (e.g. for securing film, spacing approx. 500 mm) Side forklift pockets for empty handling 🚛 Certifications & Transport CSC approved (DEKRA) – suitable for international maritime transport Rail transport coding available Stackable 📦 Areas of Application Bulk goods (e.g. recycling materials, agricultural products, building materials) Industrial and logistics applications Intermodal transport (road / rail / sea) Multiple units available / new build upon request!

Condition: used, maximum load weight: 12,300 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/2020, next inspection (TÜV): 03/2027, loading space length: 7,400 mm, loading space width: 2,460 mm, loading space height: 2,300 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, tail-lift, ISO box trailer, through-loadable, with tail lift MBB Palfinger 2,000 kg ABS EBS Dksdpfsyvxi Nsx Akken Disc brakes Extendable drawbar Air suspension Plastic toolbox Duo Matic brake connection Plastic floor Galvanized frame Gross weight 18,000 kg Payload 12,300 kg Tyres 385/65R22.5 80% Vehicle number 2432 for inquiries. Trailer in very good overall condition, from first owner. No liability for typing or data transmission errors. Subject to change and prior sale. Daily cash purchase of commercial vehicles, construction machinery, trailers and semitrailers from model year 2000-2025.

Condition: used, functionality: fully functional, machine/vehicle number: RM 26, empty load weight: 2,750 kg, maximum load weight: 13,250 kg, overall weight: 16,000 kg, loading space length: 7,700 mm, loading space width: 2,480 mm, loading space height: 2,980 mm, loading space volume: 57 m³, color: grey, Year of construction: 2011, Jumbo swap body with tarpaulin 7.82 m Sliding curtain side Lifting roof Galvanized frame Dksdpjwx Inaefx Akkon Lashing rings in the floor New safety inspection (UVV) 6 units available Nationwide delivery possible Subject to errors and prior sale.

Condition: used, overall weight: 16,000 kg, first registration: 09/2009, loading space length: 7,720 mm, loading space width: 2,495 mm, loading space height: 2,950 mm, loading space volume: 57 m³, Wecon BDF swap body flatbed tarpaulin 57 m³, lifting roof Edscha Internal reference for inquiries: 0925739 Type: WPR 782 NVSGA Permissible total weight: 16,000 kg Unladen weight: 2,750 kg Dedpfx Asxfxm Rokkjkn Lifting roof Edscha sliding roof system Flatbed tarpaulin Wear-resistant wooden floor Loading area dimensions: Length: 7. mm Width: 2,495 mm Height: 2,950 mm Year of manufacture: 2009 ----Price: €3,900 + 19% VAT. For further questions, you can reach us at the following phone numbers: We speak: German, English, French, Polish, and ????? Subject to errors, changes, and prior sale.

Condition: used, maximum load weight: 13,200 kg, overall weight: 16,000 kg, first registration: 06/2018, loading space length: 7,040 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 38 m³, total width: 2,550 mm, total height: 2,450 mm, Year of construction: 2018, WhatsApp WECON Curtainsider SLIDING TARPAULIN PLATEAU BDF Swap Body Duke Type WPR 715 SG Year of manufacture 06/2018 First German owner! 4 WPR 715 SG trailers with the following equipment: WECON standard swap body with sliding curtains, Duke, type WPR 715 SG External dimensions Body length: 7,150 mm Body width: 2,550 mm Interior dimensions Body length: 7,040 mm Body width: 2,480 mm Terrain weight: 2,590 kg GVWR: 16,000 kg Interior height 2,200 mm with sliding roof included Exterior height 2,450 mm (corner height 2,450 mm = C 00) Side loading height: 2,120 mm Rear loading height: 2,165 mm Forklift pockets on the rear of the floor frame Reinforced zinc tubes for carrying a truck-mounted forklift. Chain lock bracket required on the body. --> Centering tunnel restricted due to reinforced design Suitable for continuous use! Floor frame: Made of high-quality galvanized steel, overall height 215 mm, 4-way container corner fittings on a 20' base, 4 gripping edges according to EN 284, wheel clearance 120 mm Floor covering for swap bodies: Multi-layered laminated wood floor, approximately 25 mm thick, forklift accessible, suitable for an axle load of up to 5,460 kg Rigid support legs, parking height 1,320 mm, galvanized version 15 pairs of lashing rings. Layout: From the front of the trailer to the middle of the first pair of lashing rings, approximately 400 mm long. Then distribute the remaining lashing rings evenly. Lashing rings, 1 pair, mounted on the inside of the front wall stanchion, 1000 mm high from the top edge of the floor. Pallet stop edge 30 mm high on one side, on the left side in the direction of travel, normal tarpaulin side. Dkedev Rtx Aspfx Akkon Lashing options via slotted holes (approx. 15 x 30 mm). Distance between slotted holes approx. 200 mm. The loading height is reduced by 30 mm. Front wall: smooth, bolted steel front wall, full-height cassette construction (cassettes galvanized). Screen-printed panel on the inside of the front wall, 1500 mm high, 12 mm thick. Inner front wall with impact protection consisting of 300 mm high, galvanized sheet steel. Smooth double-leaf portal door, sandwich construction, 4 internal espagnolette locks, 4 hinges per door leaf. Left side wall: sliding tarpaulin in accordance with DIN EN 12641-2: 890 g/m² quality, 500 x 600 mm webbing pattern, tear strength: vertical 24 kN, horizontal 13 kN. Stainless steel belt buckle with pressure release. 1 center stanchion, symmetrically arranged --> Left-hand direction of travel Stanches each with 3 rows of slatted pockets included and one row of collecting pockets (approx. 600 mm high) on the floor 8 aluminum insert slats, left-hand direction of travel, approx. 100 mm high Wecon RAPIDO RIGHT: vertical steel profiles attached to the side tarpaulin and guided in the upper and lower guide rails via rollers. - Vertical tarpaulin tensioners are omitted - Center stanchions are omitted - Horizontal insert slats are omitted Fixed tarpaulin roof: sliding roof, standard only with locking mechanism. Roof with adjacent guide rails, width between guide rails approx. 2,370 mm, distance between lower edge of guide rail and lower edge of bow approx. 90 mm Coating: Floor frame and support legs hot-dip galvanized, body parts dip-primed and powder-coated in standard RAL colors, Roof tarpaulin: RAL 9010 (pure white) Side tarpaulin: RAL 9010 (pure white) Front wall: RAL 9010 (pure white) Rear portal: RAL 9010 (pure white) TÜV Certificate Code XL included This certificate confirms the load securing

Condition: used, maximum load weight: 13,200 kg, overall weight: 16,000 kg, first registration: 04/2016, loading space length: 7,040 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 38 m³, total width: 2,550 mm, total height: 2,450 mm, Year of construction: 2016, WhatsApp WECON Curtainsider Sliding-Platform-BDF Swap body Duke type WPR 715 SG Year of construction German first ownership! 4 pieces WPR 715 SG with the following equipment: WECON standard sliding curtainsider swap body Duke type WPR 715 SG External dimensions Body length: 7,150 mm Body width: 2,550 mm Interior dimensions Body length: 7,040 mm Body width: 2,480 mm Tare weight: 2,590 kg Permissible total weight: 16,000 kg Interior height 2,200 mm with sliding roof included External height 2,450 mm (corner height 2,450 mm = C 00) Side loading height: 2,120 mm Rear through-loading height: 2,165 mm Forklift pockets at the rear in the floor frame Reinforced version of the zinc tubes for carrying a truck-mounted forklift. Bracket required for securing chains on the body. --> Limited centering tunnel due to reinforced design Dedpfx Asu Uxr Rskkekn Suitable for continuous use! Floor frame: Made of galvanized quality steel, height 215 mm, Container corner fittings 4-fold on 20' base, 4 gripping edges acc. to EN 284, wheel freewheel 120 mm Floor covering for swap bodies: Multi-glued plywood floor approx. 25 mm thick, can be driven on with a forklift truck, suitable for an axle load of up to 5,460 kg Rigid support legs, parking height 1320 mm, galvanized version 15 pairs of lashing rings. Distribution: From VK STW to the middle of the 1st pair of lashing rings approx. 400 mm, then even distribution of the remaining lashing rings Lashing rings, 1 pair, mounted on the inclusive inside of the end wall stanchion Height 1000 mm from top edge of floor Pallet stop edge 30 mm high on one side on the left in the direction of travel, normal tarpaulin side. Lashing options through slotted holes (approx. 15 x 30 mm) Distance between slotted holes approx. 200 mm. The loading height is reduced by 30 mm. Front wall: smooth, bolted steel front wall, full height in cassette construction (galvanized cassettes) Screen printing plate on the inside of the front wall 1500 mm high, 12 mm thick Front wall inside with collision protection consisting of 300 mm high, galvanized sheet steel Portal double wing door smooth, sandwich, 4 internal espagnolette locks, 4 hinges per door wing. Left-hand side panel sliding tarpaulin in accordance with DIN EN 12641-2: quality 890 g/m², belt grid 500 x 600 mm, tear resistance: vertical 24 kN, horizontal 13 kN. VA belt buckle with pressure safety device. 1 central stanchion, symmetrically arranged --> left-hand direction of travel Stanchions each with 3 rows of slat pockets included and one row of collection pockets (approx. 600 mm high) on the floor 8 aluminum insertable slats, driving direction left, approx. 100 mm high Wecon RAPIDO RIGHT vertical steel profiles attached to the side tarpaulin and guided by rollers in the upper and lower running rails. - Vertical tarpaulin tensioners are omitted - Center stanchions are omitted - Horizontal insertion slats are omitted Fixed tarpaulin roof design as sliding roof Standard only fixed. Canopy with side-by-side running rails, width between the running rails approx. 2,370 mm, distance from lower edge of running rail to lower edge of bows approx. 90 mm Coating: Base frame and support legs hot-dip galvanized, superstructure parts dip primed and powder-coated in a standard RAL color, Roof tarpaulin: RAL 9010 (pure white) Side tarpaulin: RAL 9010 (pure white) Front wall: RAL 9010 (pure white) Rear portal: RAL 9010 (pure white) TÜV certificate Code XL included The certificate confirms the load securing effect of the ve

Condition: used, maximum load weight: 13,200 kg, overall weight: 16,000 kg, first registration: 06/2017, loading space length: 7,040 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 38 m³, total width: 2,550 mm, total height: 2,450 mm, Year of construction: 2017, WhatsApp WECON Curtainsider SLIDING TARPAULIN PLATEAU BDF Swap Body Duke Type WPR 715 SG Year of manufacture 06/2017 First German owner! 3 WPR 715 SG trailers with the following equipment: WECON standard swap body with sliding curtains, Duke, type WPR 715 SG External dimensions Body length: 7,150 mm Body width: 2,550 mm Interior dimensions Body length: 7,040 mm Body width: 2,480 mm Terrain weight: 2,590 kg Gross weight: 16,000 kg Interior height 2,200 mm with sliding roof included Exterior height 2,450 mm (corner height 2,450 mm = C 00) Side loading height: 2,120 mm Rear loading height: 2,165 mm Forklift pockets on the rear of the floor frame Reinforced zinc tubes for carrying a truck-mounted forklift. Chain lock bracket required on the body. Dksdpfx Asv Rtyaekkjn --> Centering tunnel restricted due to reinforced design Suitable for continuous use! Floor frame: Made of high-quality galvanized steel, overall height 215 mm, 4-way container corner fittings on a 20' base, 4 gripping edges according to EN 284, wheel clearance 120 mm Floor covering for swap bodies: Multi-layered laminated wood floor, approximately 25 mm thick, forklift accessible, suitable for an axle load of up to 5,460 kg Rigid support legs, parking height 1,320 mm, galvanized version 15 pairs of lashing rings. Layout: From the front of the trailer to the middle of the first pair of lashing rings, approximately 400 mm long. Then distribute the remaining lashing rings evenly. Lashing rings, 1 pair, mounted on the inside of the front wall stanchion, 1000 mm high from the top edge of the floor. Pallet stop edge 30 mm high on one side, on the left side in the direction of travel, normal tarpaulin side. Lashing options via slotted holes (approx. 15 x 30 mm). Distance between slotted holes approx. 200 mm. The loading height is reduced by 30 mm. Front wall: smooth, bolted steel front wall, full-height cassette construction (cassettes galvanized). Screen-printed panel on the inside of the front wall, 1500 mm high, 12 mm thick. Inner front wall with impact protection consisting of 300 mm high, galvanized sheet steel. Smooth double-leaf portal door, sandwich construction, 4 internal espagnolette locks, 4 hinges per door leaf. Left side wall: sliding tarpaulin in accordance with DIN EN 12641-2: 890 g/m² quality, 500 x 600 mm webbing pattern, tear strength: vertical 24 kN, horizontal 13 kN. Stainless steel belt buckle with pressure release. 1 center stanchion, symmetrically arranged --> Left-hand direction of travel Stanches each with 3 rows of slatted pockets included and one row of collecting pockets (approx. 600 mm high) on the floor 8 aluminum insert slats, left-hand direction of travel, approx. 100 mm high Wecon RAPIDO RIGHT: vertical steel profiles attached to the side tarpaulin and guided in the upper and lower guide rails via rollers. - Vertical tarpaulin tensioners are omitted - Center stanchions are omitted - Horizontal insert slats are omitted Fixed tarpaulin roof: sliding roof, standard only with locking mechanism. Roof with adjacent guide rails, width between guide rails approx. 2,370 mm, distance between lower edge of guide rail and lower edge of bow approx. 90 mm Coating: Floor frame and support legs hot-dip galvanized, body parts dip-primed and powder-coated in standard RAL colors, Roof tarpaulin: RAL 9010 (pure white) Side tarpaulin: RAL 9010 (pure white) Front wall: RAL 9010 (pure white) Rear portal: RAL 9010 (pure white) TÜV Certificate Code XL included This certificate confirms the load

Condition: used, maximum load weight: 13,200 kg, overall weight: 16,000 kg, first registration: 04/2021, loading space length: 7,040 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 38 m³, total width: 2,550 mm, total height: 2,450 mm, Year of construction: 2021, WhatsApp WECON Curtainsider SLIDING TARPAULIN PLATEAU BDF Swap Body Duke Type WPR 715 SG Year of manufacture 04/2021 First German owner! 4 WPR 715 SG trailers with the following equipment: WECON standard swap body with sliding curtains, Duke, type WPR 715 SG External dimensions Body length: 7,150 mm Body width: 2,550 mm Interior dimensions Body length: 7,040 mm Body width: 2,480 mm Terrain weight: 2,590 kg GVWR: 16,000 kg Interior height: 2,200 mm with sliding roof included Exterior height: 2,450 mm (corner height 2,450 mm = C 00) Side loading height: 2,120 mm Rear loading height: 2,165 mm Floor storage compartment at the rear in the floor frame --> This limits the centering tunnel Floor frame: Construction made of galvanized quality steel, overall height 215 mm mm, 4-way container corner fittings on a 20' base, 4 gripping edges according to EN 284, wheel clearance 120 mm Floor covering for swap bodies: Multi-layered laminated wood floor, approximately 25 mm thick, forklift-accessible, suitable for an axle load of up to 5,460 kg Rigid support legs, parking height 1,320 mm, galvanized 15 pairs of lashing rings. Distribution: From the front of the trailer body to the middle of the first pair of lashing rings, approximately 400 mm long. Then evenly distribute the remaining lashing rings. Lashing rings, 1 pair, mounted on the inside of the end wall, 1,000 mm high from the top edge of the floor. Pallet stop edge 30 mm high on one side, left in the direction of travel, normal tarpaulin side. Lashing options via slotted holes (approx. 15 x 30 mm). Distance between slotted holes approx. 200 mm. The loading height is reduced by 30 mm. Front wall: smooth, bolted steel front wall, with a full-height cassette construction (cassettes galvanized). Screen-printed panel on the inside of the front wall, 1500 mm high, 12 mm thick. Interior front wall with impact protection consisting of 300 mm high, galvanized sheet steel. Smooth double-leaf portal door, sandwich construction, 4 internal espagnolette locks, 4 hinges per door leaf. Left side wall: sliding tarpaulin in accordance with DIN EN 12641-2: 890 g/m² quality, 500 x 600 mm webbing pattern, tear strength: vertical 24 kN, horizontal 13 kN. VA belt buckle with pressure relief device. 1 center stanchion, symmetrically arranged --> Left-hand direction of travel Stanches each with 3 rows of slatted pockets included and one row of collecting pockets (approx. 600 mm high) on the floor 8 aluminum insert slats, left-hand direction of travel, approx. 100 mm high Wecon RAPIDO RIGHT: vertical steel profiles attached to the side tarpaulin and guided in the upper and lower guide rails via rollers. - Vertical tarpaulin tensioners are omitted - Center stanchions are omitted - Horizontal insert slats are omitted Fixed tarpaulin roof: sliding roof, standard only with locking mechanism. Roof with adjacent guide rails, width between guide rails approx. 2,370 mm, distance between lower edge of guide rail and lower edge of bow approx. 90 mm Djdpfjv Rtygjx Akkekn Coating: Floor frame and support legs hot-dip galvanized, body parts dip-primed and powder-coated in standard RAL colors, Roof tarpaulin: RAL 9010 (pure white) Side tarpaulin: RAL 9010 (pure white) Front wall: RAL 9010 (pure white) Rear portal: RAL 9010 (pure white) TÜV Code XL certificate included This certificate confirms the load securing effectiveness of the vehicle body. Requirements according to VDI 2700, EN 283, EN 12195 Part 1-2000, ADR, and EN 12642 - Code XL are met. Accesso

Condition: used, PRICES FROM €4,200 + VAT C45 CURTAINSIDER SWAP BODY Dkodpfx Asx Dr Dtokkjn EXTERNAL HEIGHT: 290 cm INTERNAL HEIGHT: 261 cm CAPACITY: 34 PALLETS TARE WEIGHT: 4,900 kg SLIDING ROOF (COPRI/SCOPRI)