Swap body trailer

WECON 4x Duke WPR715 SG RAPIDO Staplerhalter verzinkt

Condition: used, maximum load weight: 13,200 kg, overall weight: 16,000 kg, first registration: 04/2016, loading space length: 7,040 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 38 m³, total width: 2,550 mm, total height: 2,450 mm, Year of construction: 2016, WhatsApp WECON Curtainsider Sliding-Platform-BDF Swap body Duke type WPR 715 SG Year of construction German first ownership! 4 pieces WPR 715 SG with the following equipment: WECON standard sliding curtainsider swap body Duke type WPR 715 SG External dimensions Body length: 7,150 mm Body width: 2,550 mm Interior dimensions Body length: 7,040 mm Body width: 2,480 mm Tare weight: 2,590 kg Permissible total weight: 16,000 kg Interior height 2,200 mm with sliding roof included External height 2,450 mm (corner height 2,450 mm = C 00) Side loading height: 2,120 mm Rear through-loading height: 2,165 mm Forklift pockets at the rear in the floor frame Reinforced version of the zinc tubes for carrying a truck-mounted forklift. Bracket required for securing chains on the body. --> Limited centering tunnel due to reinforced design Suitable for continuous use! Floor frame: Made of galvanized quality steel, height 215 mm, Container corner fittings 4-fold on 20' base, 4 gripping edges acc. to EN 284, wheel freewheel 120 mm Floor covering for swap bodies: Multi-glued plywood floor approx. 25 mm thick, can be driven on with a forklift truck, suitable for an axle load of up to 5,460 kg Rigid support legs, parking height 1320 mm, galvanized version 15 pairs of lashing rings. Distribution: From VK STW to the middle of the 1st pair of lashing rings approx. 400 mm, then even distribution of the remaining lashing rings Lashing rings, 1 pair, mounted on the inclusive inside of the end wall stanchion Height 1000 mm from top edge of floor Pallet stop edge 30 mm high on one side on the left in the direction of travel, normal tarpaulin side. Lashing options through slotted holes (approx. 15 x 30 mm) Distance between slotted holes approx. 200 mm. The loading height is reduced by 30 mm. Front wall: smooth, bolted steel front wall, full height in cassette construction (galvanized cassettes) Screen printing plate on the inside of the front wall 1500 mm high, 12 mm thick Front wall inside with collision protection consisting of 300 mm high, galvanized sheet steel Portal double wing door smooth, sandwich, 4 internal espagnolette locks, 4 hinges per door wing. Left-hand side panel sliding tarpaulin in accordance with DIN EN 12641-2: quality 890 g/m², belt grid 500 x 600 mm, tear resistance: vertical 24 kN, horizontal 13 kN. VA belt buckle with pressure safety device. 1 central stanchion, symmetrically arranged --> left-hand direction of travel Stanchions each with 3 rows of slat pockets included and one row of collection pockets (approx. 600 mm high) on the floor 8 aluminum insertable slats, driving direction left, approx. 100 mm high Wecon RAPIDO RIGHT vertical steel profiles attached to the side tarpaulin and guided by rollers in the upper and lower running rails. - Vertical tarpaulin tensioners are omitted - Center stanchions are omitted - Horizontal insertion slats are omitted Fgsdpfx Afju Uxr Rjmsi Fixed tarpaulin roof design as sliding roof Standard only fixed. Canopy with side-by-side running rails, width between the running rails approx. 2,370 mm, distance from lower edge of running rail to lower edge of bows approx. 90 mm Coating: Base frame and support legs hot-dip galvanized, superstructure parts dip primed and powder-coated in a standard RAL color, Roof tarpaulin: RAL 9010 (pure white) Side tarpaulin: RAL 9010 (pure white) Front wall: RAL 9010 (pure white) Rear portal: RAL 9010 (pure white) TÜV certificate Code XL included The certificate confirms the load securing effect of the ve

Condition: used, mileage: 695,000 km, power: 324 kW (440.52 HP), first registration: 12/2013, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, empty load weight: 12,380 kg, next inspection (TÜV): 02/2025, brakes: intarder, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: air, Equipment: air conditioning, differential lock, hydraulics, onboard computer, trailer coupling, Manufacturer: MAN - Type/Model: TGS 26.440 (6x2) 17.000 Ltr. - 3 compartments - - First registration: 11.12.2013 - Mileage: 676.660 km - Number of axles: 3 - Emission class: Euro5 - Gearbox: Automatic - Suspension: Air - Lift axle - Steering axle - Brake: Disc - Air conditioning - Length: 9450 mm - Width: 2550 mm - Height: 3150 mm - Unladen weight: 12380 kg - HU date: 02.2025 - Body manufacturer: Jansky - Tank material: Stainless steel - Total tank volume: 17000 L - Tank chambers: 3 - System designation: Jansky Optimate - Stainless steel centrifugal pump - DICO 700 - Round cassette sample - Data transmission - CIP cleaning - Dome tray Fgsdeq H Szgopfx Afmji

Condition: used, maximum load weight: 13,200 kg, overall weight: 16,000 kg, first registration: 06/2017, loading space length: 7,040 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 38 m³, total width: 2,550 mm, total height: 2,450 mm, Year of construction: 2017, WhatsApp WECON Curtainsider SLIDING TARPAULIN PLATEAU BDF Swap Body Fgedjv Rtyajpfx Afmji Duke Type WPR 715 SG Year of manufacture 06/2017 First German owner! 3 WPR 715 SG trailers with the following equipment: WECON standard swap body with sliding curtains, Duke, type WPR 715 SG External dimensions Body length: 7,150 mm Body width: 2,550 mm Interior dimensions Body length: 7,040 mm Body width: 2,480 mm Terrain weight: 2,590 kg Gross weight: 16,000 kg Interior height 2,200 mm with sliding roof included Exterior height 2,450 mm (corner height 2,450 mm = C 00) Side loading height: 2,120 mm Rear loading height: 2,165 mm Forklift pockets on the rear of the floor frame Reinforced zinc tubes for carrying a truck-mounted forklift. Chain lock bracket required on the body. --> Centering tunnel restricted due to reinforced design Suitable for continuous use! Floor frame: Made of high-quality galvanized steel, overall height 215 mm, 4-way container corner fittings on a 20' base, 4 gripping edges according to EN 284, wheel clearance 120 mm Floor covering for swap bodies: Multi-layered laminated wood floor, approximately 25 mm thick, forklift accessible, suitable for an axle load of up to 5,460 kg Rigid support legs, parking height 1,320 mm, galvanized version 15 pairs of lashing rings. Layout: From the front of the trailer to the middle of the first pair of lashing rings, approximately 400 mm long. Then distribute the remaining lashing rings evenly. Lashing rings, 1 pair, mounted on the inside of the front wall stanchion, 1000 mm high from the top edge of the floor. Pallet stop edge 30 mm high on one side, on the left side in the direction of travel, normal tarpaulin side. Lashing options via slotted holes (approx. 15 x 30 mm). Distance between slotted holes approx. 200 mm. The loading height is reduced by 30 mm. Front wall: smooth, bolted steel front wall, full-height cassette construction (cassettes galvanized). Screen-printed panel on the inside of the front wall, 1500 mm high, 12 mm thick. Inner front wall with impact protection consisting of 300 mm high, galvanized sheet steel. Smooth double-leaf portal door, sandwich construction, 4 internal espagnolette locks, 4 hinges per door leaf. Left side wall: sliding tarpaulin in accordance with DIN EN 12641-2: 890 g/m² quality, 500 x 600 mm webbing pattern, tear strength: vertical 24 kN, horizontal 13 kN. Stainless steel belt buckle with pressure release. 1 center stanchion, symmetrically arranged --> Left-hand direction of travel Stanches each with 3 rows of slatted pockets included and one row of collecting pockets (approx. 600 mm high) on the floor 8 aluminum insert slats, left-hand direction of travel, approx. 100 mm high Wecon RAPIDO RIGHT: vertical steel profiles attached to the side tarpaulin and guided in the upper and lower guide rails via rollers. - Vertical tarpaulin tensioners are omitted - Center stanchions are omitted - Horizontal insert slats are omitted Fixed tarpaulin roof: sliding roof, standard only with locking mechanism. Roof with adjacent guide rails, width between guide rails approx. 2,370 mm, distance between lower edge of guide rail and lower edge of bow approx. 90 mm Coating: Floor frame and support legs hot-dip galvanized, body parts dip-primed and powder-coated in standard RAL colors, Roof tarpaulin: RAL 9010 (pure white) Side tarpaulin: RAL 9010 (pure white) Front wall: RAL 9010 (pure white) Rear portal: RAL 9010 (pure white) TÜV Certificate Code XL included This certificate confirms the load

Condition: used, overall weight: 16,000 kg, maximum load weight: 13,140 kg, empty load weight: 2,860 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,470 mm, operation weight: 2,860 kg, 7.45 BDF steel smooth-wall swap body with roller shutter, multiple available. Fjdpfx Ast Dki Iefmsgi External height 2.75 m Internal dimensions approx. (L x W x H) 7.30 m x 2.48 m x 2.47 m, standard parking height. Neutralized. Can be painted on customer request (surcharge) Loading included in the purchase price, delivery possible for an extra charge. Please enquire about the cost of delivery by email, stating the recipient's zip code.

Condition: refurbished (used), functionality: fully functional, color: white, 7.82 m BDF Krone Smooth-Sided Swap Body, used (multiple units available) Color: White Drop-off height: 1120 mm The swap body is watertight and the roller shutter door operates smoothly. Approximate external dimensions (mm): Length 7820 x Width 2550 x Height 2925 Approximate internal dimensions (mm): Length 7700 x Width 2480 x Height 2700 Door opening (mm): Width 2370 x Height 2530 Lashing: Keyhole type Permissible total weight for approval/operation: 16,000 kg Intermodal ready, incl. rail coding to DIN EN 13044 Rail approval Code XL (for rail transport at speeds over 120 km/h) Floor frame: 195 mm high floor module incl. floor panel; rectangular tube longitudinal beams with cross members and outer frame as welded construction with underfloor guide tunnel 4 container corner castings on 20' basis, symmetrical overhangs, 4 grab bar profiles 7 pairs of lashing rings at the sides in the rubbing strip Floor: Fgsdpfxovxbfms Afmsi Type: BO WST 27 mm thick, waterproof bonded phenolic resin-coated plywood floor, strength as per DIN EN 283; suitable for forklift axle loads up to max. 5,460 kg 2 ventilation openings at the front in the floor (as per GGVS) Box body: Superstructure type: AB WST Internal height: 2700 mm Portal height (internal): 2525 mm Total height: 2925 mm Corner height: 2900 mm Closed superstructure Smooth side walls made of galvanized steel sheet panels Roof made of trapezoidal profiled steel sheets, panel height: 25 mm 2 ventilation grills per side wall Rubbing rail and side wall with recesses; internal forklift impact protection, 3-sided, approx. 300 mm high Front wall smooth, made of galvanized steel sheet panels Interior front wall with 21 mm phenolic resin-coated plywood, 750 mm high, above that continuous 12 mm plywood Exterior front wall upper section offset (optimized for cornering) Rear wall with roller shutter door (net width: 2370 mm), with DB Train Plus approval, replaceable rollers Flat steel impact protection for roller shutter guide rails Side walls internally fully covered with keyhole plates 13 steel guide rails recessed left and right for double-deck load bars 13 LM load beams for double-deck loading Horizontal steel impact protection on rear profile, left and right Note: Actual dimensions and other specific details may vary slightly from the above due to ongoing product improvements.

Condition: used, mileage: 187,000 km, power: 471 kW (640.38 HP), first registration: 05/2023, empty load weight: 8,227 kg, maximum load weight: 10,773 kg, overall weight: 19,000 kg, tire size: -, axle configuration: 4x2, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2023, Equipment: ABS, air conditioning, airbag, differential lock, onboard computer, Ref: VO24-1576 We offer for sale a Man TGX tractor unit: Prices on request. Additional information: Aluminum wheels. Full suspension. Warranty available. Manufacturer's maintenance contract. Configuration: Axles: 6x4 Tandem axle with reinforced suspension for maximum towing capacity Fodpswpw Ttofx Afmogi Engine: D38, 15.2 liters, developing 640 hp Maximum torque of 3,000 Nm, delivering impressive performance even in demanding conditions Compliant with Euro 6d standard Transmission: MAN TipMatic automated transmission with specific modes for heavy loads and complex terrain Intelligent gear management for an optimal balance between power and fuel economy Cabin: GX, the top-of-the-line version for superior comfort (XXL) Interior: Wide bed with premium mattresses, ergonomically designed, heated and ventilated leather seats Technologies: Digital instrument panel with touchscreen Intuitive controls via the MAN SmartSelect system Advanced connectivity and navigation systems On-board technologies: MAN EfficientCruise predictive cruise control for Fuel efficiency Emergency brake assist with obstacle detection Lane keeping assist and sign recognition system Cameras and sensors for increased visibility around the vehicle Safety and comfort: Advanced braking and stability systems (ABS, ESP, ASR) Multi-zone automatic climate control for optimal comfort Full LED lighting for maximum visibility, even in nighttime conditions Use: Ideal for oversized convoys, industrial missions, and long-distance transport Ability to tow very heavy loads with proven reliability Contact us for more information. Gearbox details

Condition: used, mileage: 341,943 km, power: 471 kW (640.38 HP), first registration: 02/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2024, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, PerformanceLine equipment!!! Lane Guard System IV (LGS IV) transmission functionality: rocking free and efficient multifunction steering wheel adjustable in height and angle, driver's comfort seat with air suspension and air conditioning with lumbar support and heating, passenger comfort seat with air suspension with lumbar support, shoulder adjustment and heating, low-noise protection for Austria. Additional water heating with coolant preheating, rear wide-angle side mirror heated and electrically adjustable, passenger-side RS with electric maneuvering aid, PerformanceLine equipment!!! Radio MAN Media Truck Advanced 12 V with 7? color display, engine D3876LF09 - 640 HP / 471 KW EURO6 SCR 3000 Nm C-R OBD-C, 2-cylinder air compressor 476 cc with Air Pressure Management (APM), transmission software MAN TipMatic® Profi (road use), aluminum fuel tank 490l right 250l left and 80l AdBlue, fifth wheel coupling JOST JSK 42MK162-Z9J height 162 mm (incl. 22mm plate) with long pull handle with internal lubrication Fgodpfx Afjrhub Domoi

Condition: used, Year of construction: 2023, color: red, overall weight: 16,000 kg, maximum load weight: 12,880 kg, empty load weight: 3,120 kg, loading space volume: 50 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,770 mm, first registration: 01/2023, total length: 7,300 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 69311 Krone, swap body / container * Year of manufacture: 2023 * Type: 7.45 * Fixed roof * Load securing certificate DIN EN 12642 Code XL * Textile version * Rail transportable – crane-liftable * Other * Gross weight: 16,000 kg * Unladen weight: 3,120 kg * Payload: 12,880 kg * Permitted gross weight: 16,000 kg * Internal dimensions: L=7,300 mm, W=2,480 mm, H=2,770 mm * Internal volume: 50 m³ * Corner fitting dimension (E): 5,853 mm * Overhang: 799 mm * Stowage height: 1,120 mm * Pallet spaces: 18 * Krone swap body 745 damaged Disclaimer: Subject to change, prior sale, and errors excepted. Fgedpewa Iafjfx Afmji More pictures and videos are available on our website. Our comprehensive service includes, for example: * Purchasing / selling / leasing of commercial vehicles * Fast and uncomplicated financing * Arrangement of all (export) documentation * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Delivery/transfer of commercial vehicles Please contact our qualified staff for advice—we'll be happy to assist you.

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system 7,450 mm long, paint NEW in Premium Plus Used smooth steel swap body BDF system 7,450 mm long, rear with aluminum roller shutter.\nInternal keyhole system in the side walls.\n\nPREMIUM-PLUS refurbishment:\n- Premium 2 K paint finish - high-gloss - here in RAL 9010 white\n- Underbody blasted, primed and repainted in the body color\n- New roller shutter cables\n- New rubber seals on the roller shutter\n- New support legs - fixed or telescopic\n- Superstructure overhauled with new UVV\n- Roof painted all around 40 cm - rest with fogging\n- Scuff plate rolled in grey\n- New galvanized access ladder\n- New galvanized gill plates fitted after painting\n- Contour markings on the sides at the bottom along the entire length\n- Contour markings at the rear in the corners\n\nAll values given are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Fgodpfx Afsuzlxmemei

Condition: used, maximum load weight: 13,200 kg, overall weight: 16,000 kg, first registration: 04/2021, loading space length: 7,040 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 38 m³, total width: 2,550 mm, total height: 2,450 mm, Year of construction: 2021, WhatsApp WECON Curtainsider SLIDING TARPAULIN PLATEAU BDF Swap Body Duke Type WPR 715 SG Year of manufacture 04/2021 First German owner! 4 WPR 715 SG trailers with the following equipment: WECON standard swap body with sliding curtains, Duke, type WPR 715 SG External dimensions Body length: 7,150 mm Body width: 2,550 mm Interior dimensions Body length: 7,040 mm Body width: 2,480 mm Terrain weight: 2,590 kg GVWR: 16,000 kg Interior height: 2,200 mm with sliding roof included Exterior height: 2,450 mm (corner height 2,450 mm = C 00) Side loading height: 2,120 mm Rear loading height: 2,165 mm Floor storage compartment at the rear in the floor frame --> This limits the centering tunnel Floor frame: Construction made of galvanized quality steel, overall height 215 mm mm, 4-way container corner fittings on a 20' base, 4 gripping edges according to EN 284, wheel clearance 120 mm Floor covering for swap bodies: Multi-layered laminated wood floor, approximately 25 mm thick, forklift-accessible, suitable for an axle load of up to 5,460 kg Rigid support legs, parking height 1,320 mm, galvanized 15 pairs of lashing rings. Distribution: From the front of the trailer body to the middle of the first pair of lashing rings, approximately 400 mm long. Then evenly distribute the remaining lashing rings. Lashing rings, 1 pair, mounted on the inside of the end wall, 1,000 mm high from the top edge of the floor. Pallet stop edge 30 mm high on one side, left in the direction of travel, normal tarpaulin side. Lashing options via slotted holes (approx. 15 x 30 mm). Distance between slotted holes approx. 200 mm. The loading height is reduced by 30 mm. Front wall: smooth, bolted steel front wall, with a full-height cassette construction (cassettes galvanized). Screen-printed panel on the inside of the front wall, 1500 mm high, 12 mm thick. Interior front wall with impact protection consisting of 300 mm high, galvanized sheet steel. Fgsdpfxsv Rtygj Afmsi Smooth double-leaf portal door, sandwich construction, 4 internal espagnolette locks, 4 hinges per door leaf. Left side wall: sliding tarpaulin in accordance with DIN EN 12641-2: 890 g/m² quality, 500 x 600 mm webbing pattern, tear strength: vertical 24 kN, horizontal 13 kN. VA belt buckle with pressure relief device. 1 center stanchion, symmetrically arranged --> Left-hand direction of travel Stanches each with 3 rows of slatted pockets included and one row of collecting pockets (approx. 600 mm high) on the floor 8 aluminum insert slats, left-hand direction of travel, approx. 100 mm high Wecon RAPIDO RIGHT: vertical steel profiles attached to the side tarpaulin and guided in the upper and lower guide rails via rollers. - Vertical tarpaulin tensioners are omitted - Center stanchions are omitted - Horizontal insert slats are omitted Fixed tarpaulin roof: sliding roof, standard only with locking mechanism. Roof with adjacent guide rails, width between guide rails approx. 2,370 mm, distance between lower edge of guide rail and lower edge of bow approx. 90 mm Coating: Floor frame and support legs hot-dip galvanized, body parts dip-primed and powder-coated in standard RAL colors, Roof tarpaulin: RAL 9010 (pure white) Side tarpaulin: RAL 9010 (pure white) Front wall: RAL 9010 (pure white) Rear portal: RAL 9010 (pure white) TÜV Code XL certificate included This certificate confirms the load securing effectiveness of the vehicle body. Requirements according to VDI 2700, EN 283, EN 12195 Part 1-2000, ADR, and EN 12642 - Code XL are met. Accesso