Used heavy equipment trailers for sale (153)

Condition: new, functionality: fully functional, Year of construction: 2026, Doll / Volta cable winch. Gkodpfx Ansy U Ni Roqeb Hydraulic pipe rehabilitation winch with tracked undercarriage, hydraulic drive powered by a diesel engine. The maximum pulling force of 22 tons is achieved through 2 multi-groove capstan heads. Mounted on a chassis and equipped with an electronic measuring device displaying the pulling force, speed, laid length, and operating hour counter. Pre-tensioning automatic system with constant speed control for varying force levels. Price available upon request; available for rent or purchase.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension, beaver tail, aluminum tread plate Equipment: - Ramp - Shovel rack - Steel side panels Net: €5,621.85 / Gross: €6,690.00 Article number: VB3235301611.02 Technical data: • Brand: Variant • Model: 3516 B3 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU: 2 years from first registration • Internal dimensions (L x W x H): 300 x 162 x 23 cm • External dimensions (L x W x H): 482 x 208 x 150 cm • Loading height of the floor: 34 cm • Permissible total weight: 3,500 kg • Tare weight: 651 kg • Payload: 2,849 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/60R12C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted Godpfxezy A Sgo Anqskb DESCRIPTION • Reinforced steel fenders, walkable • Lateral steps, non-slip • Aluminum tread plate mounted on multiplex floor, more durable and wear-resistant • Screen-printed wood floor 21mm, non-slip and waterproof • Extremely stable welded grid tube frame • Frame completely hot-dip galvanized • Steel ramp, standing on a shaft, 130cm • Stable eccentric locks • Support blocks on the ramp • Very low chassis for a low approach angle • Beaver tail rear / low approach for work platforms and excavators • Excavator bucket rack at the front • 8x lashing eyes mounted in the outer frame (1000dAN/kg) • Parabolic axle from KNOTT • Parabolic axle for absolute heavy-duty use • Reversing automatic • KNOTT inertia coupling and parking brake • Lockable tow hitch • Spare wheel, mounted under the excavator bucket rack • Very stable screwed V-drawbar, REINFORCED • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Rear marker lights with rubber arm • Heavy-duty support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance, or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, perforated sheet metal floor Equipment: - Perforated sheet metal floor - 10x lashing eyes - Shovel holder Net: €5,571.43 / Gross: €6,630.00 Article number: DPT235281300.03 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 280 x 130 x 20 cm • External dimensions (L x W x H): 465 x 179 x 197 cm • Loading height of the floor: 38 cm • Permissible total weight: 3,500 kg • Unladen weight: 614 kg • Payload: 2,886 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • robust steel fenders with non-slip perforated profile • reinforced perforated steel floor on the inside • screen-printed wood floor in the center, 18mm, non-slip and waterproof • very stable steel frame, welded • frame completely hot-dip galvanized • chassis with two additional longitudinal beams under the loading area • heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • stable ACME locking system: closes quietly, loading ramps are held in place by safety clamp closures, rubber buffer dampens noise • very low chassis for a low approach angle • excavator bucket holder • 10x lashing eyes on the side wall (1000dAN/kg), TÜV certified • Free choice of lashing points when lashing to the perforated steel floor • maintenance-free axles and damping systems designed for long journeys and heavy loads • spare wheel easily accessible, mounted on the side wall • reverse drive automatic • ALKO overrun device and parking brake • coupling head made of steel casting with integrated high-security lock ALKO • very stable V-drawbar, REINFORCED • 13-pin connector • Complete LED lighting: Extremely bright, durable and reliable. • Reversing light • integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about your specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. Gsdpfx Aszy Aznsnqskb - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Perforated sheet metal floor Equipment: - Perforated sheet metal floor - Shovel holder - 10x lashing eyes Net: €5,689.08 / Gross: €6,770.01 Article number: DPT235321700.02 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: No first registration • TÜV/HU (German technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 320 x 170 x 20 cm • External dimensions (LxWxH): 512 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Tare weight: 686 kg • Payload: 2,814 kg • Chassis: Low loader (wheels beside the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor, interior, side • Screen-printed wood floor in the center, 18mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Perforated steel single ramps, steel galvanized, adjustable, L=1.62m • Stable ACME locking system: closes silently, loading ramps are held in place by safety clip fasteners, rubber buffer dampens noise • Very low chassis for a low loading angle • Excavator shovel holder • 10x lashing eye on the side panel (1000dAN/kg), TÜV certified • Free choice of lashing points for lashing in the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reverse driving automatic • ALKO overrun device and parking brake • Coupling head made of cast steel with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Complete LED lighting: Extremely bright, long-lasting and reliable. • LED side marker lights at the rear • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Gkjdpfxszy Dnpo Anqjb Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export registration including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer and repair workshop - for over 30 years. - Errors, omissions and prior sale are reserved -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension, ramp Equipment: - Tailgate - LED lighting - Shovel rack Net price: €5,672.27 / Gross price: €6,750.00 Article number: IGH235301810.02 Technical data: • Brand: Ifor Williams • Model: GH106 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 305 x 184 x 30 cm • External dimensions (LxWxH): 496 x 231 x 153 cm • Permissible total weight: 3,500 kg • Unladen weight: 700 kg • Payload: 2,800 kg • Chassis: Low-loader (wheels beside the body) • Tires: 185/70R13C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, welded steel body, hot-dip galvanized • Screen-printed plywood floor, 24mm, non-slip and waterproof • Extremely stable, welded lattice frame • Frame completely hot-dip galvanized • Full steel ramp, reinforced, h=120cm with support Gedpfxjzy Ag Rs Anqekb • Spindle-adjustable ramp latches, extremely robust and rattle-free • Lifting aid for tailgate • Very low chassis for a low approach angle • Beavertail rear / low access for aerial platforms and excavators • Excavator bucket rack in front • 10 tie-down points welded onto the side of the side panel • Leaf spring axles from KNOTT, for absolute heavy-duty use • Reinforced tires 185/70R13C • Reverse assist • KNOTT inertia coupling and parking brake • Lockable tow hitch • Very stable, screwed V-drawbar, REINFORCED • 13-pole connector • Connector cable detachable from the front • Reversing lights • Large-sized safety lights • Integrated rear fog light • Lighting recessed in the rear frame • Heavy-duty support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, perforated sheet metal floor Equipment: - Shovel rack - 10x tie-down points - Perforated sheet metal floor Net price: €5,016.81 / Gross price: €5,970.00 Article number: DPT227281300.03 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 280 x 130 x 20 cm • External dimensions (L x W x H): 465 x 179 x 197 cm • Loading height of the floor: 38 cm • Permissible total weight: 2,700 kg • Tare weight: 572 kg • Payload: 2,128 kg • Chassis: Low loader (wheels next to the body) • Tires: 165R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor inside on the sides • Screen-printed wood floor in the center, 18mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal beams under the loading area • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamping closures, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator shovel rack • 10x tie-down points on the side panel (1000dAN/kg), TÜV certified • Free choice of tie-down points when securing with the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reverse assist • ALKO overrun device and parking brake • Tow hitch made of cast steel with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pole plug • Complete LED lighting: Extremely bright, durable and reliable. • Reversing light • Integrated rear fog light Gksdpfx Anjzy Alajqjb • Robust protection for the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, empty load weight: 735 kg, maximum load weight: 2,765 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,500 mm, loading space width: 1,820 mm, loading space height: 250 mm, total length: 5,520 mm, total width: 2,420 mm, suspension: other, tire size: 195/50R13C, trailer brake: trailer braked, Temared Builder 3 3518S 3500 kg ALUMINUM PANEL FLOOR Construction machinery transporter with lattice ramp - NEW VEHICLE - Technical data: Permissible total weight 3500 kg Unladen weight approx. 735 kg Payload approx. 2765 kg Internal dimensions of the box 350 x 182 x 25 cm Overall dimensions 552 x 242 x 182 cm (LxWxH) Tires 195/50R13C Loading height approx. 37 > At an extra cost, model 4018S/2 with aluminum floor (loading area 400 x 180 cm) is also available! Equipment and construction: Frame and platform frame welded, hot-dip galvanized Excavator bucket rest on the drawbar as standard V-drawbar, support wheel standard Overrun brake with automatic reversing, handbrake maintenance-free rubber suspension axles Side panels made of solid steel, welded Walkable side panels, full box length, with integrated hole pattern Aluminum panel floor Extendable lashing eyes in the floor frame on the side Gkedpfezi R U Uox Anqob Continuous lattice ramp with lifting aid (New: gas spring, the spring shown in some images is no longer used!) Ramp support integrated into the ramp 12V electrical system, 13-pole plug, reversing light Multi-lights mounted protected in the side frame Additional lights mounted protected in the front frame incl. German vehicle registration document and COC Optional accessories: Spare wheel under the excavator bucket rest Lashing straps Theft protection etc. (please inquire) ! See many more trailers at >>> trelex.de ! * Financing and trade-in possible! * Huge selection: Over 300 trailers constantly in stock, come and visit us! * Competent and fair advice, fast processing. * Questions? Just call! ATTENTION: Immediate pickup not possible without prior order!

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, perforated metal flooring, badge_tracstrap Features: - Perforated metal flooring - TracStrap securing system - Shovel holder Net price: €7,096.64 / Gross price: €8,445.00 Article number: DPT235371700.23 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration Gkedpfx Anozy Dgreqob • Internal dimensions (L x W x H): 370 x 170 x 20 cm • External dimensions (L x W x H): 562 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Unladen weight: 826 kg • Payload: 2,674 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor, internal sides • Screen-printed plywood floor in the center, 18 mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp closures, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator bucket holder • 10x lashing eyelets on the side panel (1000dAN/kg), TÜV certified • TracStrap Kit (Heavy-Duty), TÜV-certified cargo securing system • Revolutionary system • First-class securing of tracked vehicles • Ready for immediate use • Front wedges are adjustable and form the basis for positive cargo securing • 2x lashing straps (LC 5000 daN) for lashing over the tracks • Free choice of lashing points when lashing to the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reverse assist • ALKO overrun device and parking brake • Steel casting tow hitch with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Complete LED lighting: Extremely bright, long-lasting, and reliable. • LED side marker lights at the rear • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to make requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: as good as new (ex-display), overall weight: 3,500 kg, loading space length: 4,000 mm, loading space width: 1,850 mm, loading space height: 250 mm, Year of construction: 2021, Many popular models and versions are available. More simply means more value. Our Brian James trailers offer the most convenient solution for machine transport, and are not just for professionals. Or secure your desired model with your desired equipment now. Would you like to buy one of the best multi-purpose trailers? Non-binding example: Machine transporter General Plant 400x185x25cm, 3500kg, tandem low-loader V chassis – inertia brake – AL-KO locking ball coupling, 13" tires – low loading height 38cm – robust, galvanized steel platform with multiplex floor, integrated lashing eyes – walkable fenders with non-slip sheet, ramp with spring-assisted lifting mechanism and support bracket mounted, automatic support wheel, modern lighting securely installed. We offer trade-in options for all trailers on-site and financing with a deposit starting from €0. Collection appointments are only available by arrangement. Opening hours: Mon - Fri, 8:00 a.m. to 12:30 p.m. and 2:00 p.m. to 6:00 p.m. And 24/7 on trailer-shop.de Gkedpfxjzdzfme Anqsb 06.26 550-4342 + 550-R-04

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension, ramp Equipment: - Loading ramp - Spare wheel - Shovel holder Net: €5,705.88 / Gross: €6,790.00 Article number: VM4235401810.01 Technical data: • Brand: Variant • Model: 3518 M4 • Vehicle type: Construction machinery trailer • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 400 x 180 x 30 cm • External dimensions (LxWxH): 600 x 234 x 168 cm • Loading height of the floor: 38 cm • Permissible total weight: 3,500 kg • Unladen weight: 815 kg • Payload: 2,685 kg • Chassis: Low loader (wheels beside the body) • Tires: 195/60R12C Gksdpfxezy Al Hs Anqeb • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced aluminum tread plate fenders, walkable • Lateral grid steps, non-slip • Screen-printed wood floor, 18mm, non-slip and waterproof • Extremely stable welded grid tube frame • Frame completely hot-dip galvanized • Steel loading ramp, standing on shaft, 130cm • Stable eccentric locking mechanisms • Support struts on loading ramp • Lifting aid for loading ramp • Very low chassis for low loading angle • Excavator bucket holder at the front • Spare wheel, mounted under the excavator bucket holder • 10 x lashing eyelets mounted in the outer frame (1000dAN/kg) • 8 x lashing rings on the inside • Parabolic axle from KNOTT • Parabolic axle for absolute heavy-duty use • Reverse automatic • KNOTT inertia coupling and parking brake • Lockable coupling head • Spare wheel, mounted under the excavator bucket holder • Very stable bolted V-drawbar, REINFORCED • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Tail lights with rubber arm • Heavy-duty support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or short-term registration plates (Germany) can be provided. - Export registration plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshops for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, perforated steel floor, badge_tracstrap Features: - Perforated steel floor - Shovel rack - TracStrap securing system Net price: €6,802.52 / Gross price: €8,095.00 Article number: DPT235321700.23 Technical specifications: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 320 x 170 x 20 cm • External dimensions (L x W x H): 512 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Tare weight: 781 kg • Payload: 2,719 kg • Chassis: Low-loader (wheels next to the superstructure) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel mudguards with non-slip perforated profile • Reinforced perforated steel floor, internally on the sides • Screen-printed plywood floor in the middle, 18mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator shovel rack • 10x lashing points on the side wall (1000dAN/kg), TÜV certified • Free choice of lashing points when lashing down in the perforated steel floor • TracStrap Kit (Heavy-Duty), TÜV certified cargo securing system • Revolutionary system • First-class securing of tracked vehicles • Ready for departure in a very short time • Front wedges are adjustable and form the basis for positive load securing • 2x lashing straps (LC 5000 daN) for lashing over the tracks • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side wall • Reverse drive automatic • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security ALKO lock • Very stable V-drawbar, REINFORCED • 13-pin plug • Complete LED lighting: Extremely bright, durable and reliable. • LED position lights at the rear • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about special requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates including customs declaration possible Gjdpfx Anszy A A Soqekb Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop - for over 30 years. - Errors, omissions and prior sale excepted.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Perforated sheet metal floor, badge_tracstrap Equipment: - Perforated sheet metal floor - Shovel rack - TracStrap securing system Net price: €6,743.70 / Gross price: €8,025.00 Article number: DPT235371700.22 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 370 x 170 x 20 cm • External dimensions (LxWxH): 562 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Tare weight: 781 kg • Payload: 2,719 kg • Chassis: Low loader (wheels next to the superstructure) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor, internally on the sides • Screen-printed wooden floor in the middle, 18mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Perforated steel individual ramps, steel galvanized, adjustable, L=1.62m • Stable ACME locking system: closes silently, loading ramps are held in place by safety locking fasteners, rubber buffer dampens noise • Very low chassis for low approach angle • Excavator bucket rack Godszy A Arspfx Anqjkb • 10x lashing points on the side wall (1000dAN/kg), TÜV certified • TracStrap Kit (Heavy-Duty), TÜV-certified cargo securing system • Revolutionary system • First-class securing of tracked vehicles • Ready for departure in a very short time • Front wedges are adjustable and form a basis for positive cargo securing • 2x lashing straps (LC 5000 daN) for lashing over the tracks • Free choice of lashing points when lashing in the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side wall • Reversing automatic system • ALKO overrun device and parking brake • Coupling head made of cast steel with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin plug • Complete LED lighting: Extremely bright, long-lasting and reliable. • LED position lights at the rear • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any desired features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Perforated sheet metal floor, badge_tracstrap Equipment: - TracStrap securing system - Perforated sheet metal floor - Shovel rack Net price: €6,449.58 / Gross price: €7,675.00 Article number: DPT235321700.22 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 320 x 170 x 20 cm • External dimensions (L x W x H): 512 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Tare weight: 736 kg • Payload: 2,764 kg • Chassis: Low-loader (wheels beside the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor on the inside sides • Screen-printed wood floor in the middle, 18 mm thick, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Perforated steel ramps, steel galvanized, adjustable, L = 1.62 m • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator bucket rack • 10 x lashing eyes on the side panel (1000 dAN/kg), TÜV certified • Free choice of lashing points when lashing down on the perforated steel floor • TracStrap Kit (Heavy-Duty), TÜV-certified cargo securing system • Revolutionary system • First-class securing of tracked vehicles • Ready for departure in a very short time • Front wedges are adjustable and form the basis for positive cargo securing • 2x lashing straps (LC 5000 daN) for lashing over the tracks • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reverse automatic braking system • ALKO overrunning device and parking brake • Coupling head made of cast steel with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Complete LED lighting: Extremely bright, durable and reliable. • LED rear marker lights • Reversing lights • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis guarantee _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary transport license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshop for over 30 years. - Errors, omissions and prior sale are reserved. Gedpfezy Dq Rox Anqekb

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, perforated metal floor Features: - Shovel holder - 10x lashing eyes - Perforated metal floor Net: €6,336.13 / Gross: €7,539.99 Article number: DPT235371700.03 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 370 x 170 x 20 cm • External dimensions (L x W x H): 562 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Tare weight: 776 kg • Payload: 2,724 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile Godpfx Aszy A U Uenqekb • Reinforced perforated steel floor inside, laterally • Screen-printed wood floor in the center, 18 mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal beams under the loading area • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp closures, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator shovel holder • 10x lashing eyes on the side rail (1000dAN/kg), TÜV certified • Free choice of lashing points when lashing to the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side rail • Reverse assist • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Complete LED lighting: Extremely bright, long-lasting and reliable. • LED rear marker lights • Reversing lights • Integrated rear fog light • Robust protection for the tail lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop! - Feel free to make requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshops for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, perforated sheet metal floor Equipment: - Perforated sheet metal floor - Shovel holder - 10x lashing points Net: €6,042.02 / Gross: €7,190.00 Article number: DPT235321700.03 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 320 x 170 x 20 cm • External dimensions (LxWxH): 512 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Unladen weight: 731 kg • Payload: 2,769 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor on the inside sides • Screen-printed wood floor in the center, 18 mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp closures, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator shovel holder • 10x lashing point on the side panel (1000dAN/kg), TÜV certified • Free choice of lashing points when lashing to the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel Gsdpfx Anjzy Dvgjqskb • Reverse assist system • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Complete LED lighting: Extremely bright, durable and reliable. • LED rear marker lights • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Air suspension + 100 km/h Equipment: -Approach angle 4° -Automatic regulation -Electrically lowerable Net: €11,642.86 / Gross: €13,855.00 Article number: TMA235451800.01 Technical data: • Brand: Tohaco • Model: MA235/4518 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 458 x 180 x 10 cm • External dimensions (LxWxH): 596 x 240 x 95 cm • Loading height of the floor: 0 cm • Permissible total weight: 3,500 kg • Tare weight: 790 kg • Payload: 2,710 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/50R13C • Suspension: VB-Airsuspension air suspension + 100 km/h • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Hot-dip galvanized chassis • Very stable, welded steel frame • Rear inclined • Very stable V-drawbar • Plastic fenders • Independent, air-sprung wheel suspension • Incl. 100 km/h approval • Loading platform can be lowered to the road surface or to the ground by means of air suspension • Approach angle approx. 4°. • Air suspension fully electronic • 4 air springs • 4 adjustable shock absorbers • Emergency valves for external filling of the air suspension • Tires 195/50R13C • Polyamide air hoses • Connections of the air suspension system made of stainless steel • Function only with a fully loaded 13-pole socket • Mounting of the suspension system completely under the loading platform • 12V AGM vehicle battery 75 Ah • 2 sensors for height adjustment • Electronic height adjustment and setting of the ride height of the loading platform • Electronic remote control in the drawbar • Compressor 12V 18-Bar - Made in Germany • Air tank 10 liters • Charging socket for external battery charger • ASCU control system • 18mm multiplex floor panel, made of birch wood, with anti-slip coating • Lashing rail, left, right and front • Foldable license plate holder with LED lighting • Support wheel, automatic • Large-sized safety lighting • Integrated rear fog lamp • Reversing light • 13-pole plug _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to ask about special requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Gksdpozy A Smefx Anqjb Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension, ramp Equipment: - Loading ramp - Shovel holder - Spare wheel Godszy A E Tjpfx Anqokb Net price: €7,134.45 / Gross price: €8,490.00 Article number: VM5335461910.01 Technical data: • Brand: Variant • Model: 3520 M5 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 460 x 198 x 30 cm • External dimensions (LxWxH): 660 x 253 x 168 cm • Loading height of the floor: 38 cm • Permissible total weight: 3,500 kg • Tare weight: 1,010 kg • Payload: 2,490 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/60R12C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • 3x parabolic axle • Reinforced aluminum diamond-plate fenders, walkable • Lateral grid steps, non-slip • Screen-printed plywood floor, 18mm, non-slip and waterproof • Extremely stable welded lattice frame • Frame completely hot-dip galvanized • Steel loading ramp, standing on shaft, 130cm • Stable eccentric locks • Support jacks on loading ramp • Lifting aid for loading ramp • Very low chassis for a low loading angle • Excavator bucket holder in front • Spare wheel, mounted under excavator bucket holder • 10x lashing eyes mounted in the outer frame (1000dAN/kg) • 10x lashing points on the inside • Parabolic axle from KNOTT • Parabolic axle for absolute heavy-duty use • Reverse automatic • KNOTT inertia coupling and parking brake • Lockable tow hitch • Spare wheel, mounted under excavator bucket holder • Very stable bolted V-drawbar, REINFORCED • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Rear marker lights at the rear with rubber arm • Heavy-duty support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to make requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *AVAILABLE IMMEDIATELY* Includes: Ramp Equipment: - Spare wheel - Robust steel body - Highly customizable Net price: €7,092.44 / Gross price: €8,440.00 Article number: GP3235401702.01 Technical data: • Brand: Brian James • Model: General Plant • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 400 x 170 x 30 cm • External dimensions (L x W x H): 569 x 230 x 210 cm • Loading height of the floor: 48 cm • Permissible total weight: 3,500 kg • Tare weight: 847 kg • Payload: 2,653 kg • Chassis: Low loader (wheels beside the body) • Tires: 185/70R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Universal all-round construction machinery trailer - unique on the market • Every available option can be flexibly added or removed, allowing for needs-based customization for almost any application • Attachment option on all 4 corners for side panels, tarpaulin frames, side panel extensions, or front wall extensions • Vehicle also designed for all options after purchase: enormous potential for retrofitting: hydraulic tilting functions, winches, other ramps, attachments, etc. can be retrofitted at any time • Robust steel fenders with non-slip perforated profile • Reinforced screen-printed plywood floor, 18 mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with additional longitudinal beam under the loading area • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp closures, rubber buffer dampens noise • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Very low chassis for a low approach angle • Lashing points at the bottom and top of the side panel (1000 dAN/kg), TÜV certified • Side panels color: black • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reverse assist system • ALKO overrun device and parking brake • Coupling head made of cast steel with integrated high-security lock, ALKO • Very stable V-drawbar, REINFORCED • 13-pin plug • Complete LED lighting: Extremely bright, long-lasting and reliable. • LED side marker lights at the rear • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Automatic heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to make requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Gedpfjzy Di Tex Anqskb Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Air suspension + 100km/h Equipment: -Approach angle 4° -Automatic control -Electrically lowerable Net price: €11,252.10 / Gross price: €13,390.00 Article number: TMA235391700.01 Technical data: • Brand: Tohaco • Model: MA235/3719 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 397 x 170 x 10 cm • External dimensions (LxWxH): 533 x 228 x 95 cm • Loading height of the floor: 0 cm • Permissible total weight: 3,500 kg • Unladen weight: 725 kg • Payload: 2,775 kg • Chassis: Low-loader (wheels beside the body) • Tires: 195/50R13C • Suspension: VB-airsuspension air suspension + 100km/h • Support wheel: Yes, automatic • 100km/h approval: Yes DESCRIPTION • Hot-dip galvanized chassis • Very stable steel frame, welded • Rear end angled • Very stable V-drawbar • Plastic fenders • Wheel suspension, independently air-sprung • Includes 100km/h approval • Loading platform can be lowered to the road surface or the ground by means of air suspension • Approach angle approx. 4°. • Air suspension fully electronic • 4 air springs • 4 adjustable shock absorbers • Emergency valves, for external filling of the air suspension • Tires 195/50R13C • Polyamide air hoses • Connections of the air suspension system made of stainless steel • Function only with a fully loaded 13-pole socket • Mounting of the suspension system completely under the loading platform • 12V AGM vehicle battery 75 Ah • 2 sensors for height control • Electronic height control and adjustment of the ride height of the loading platform • Electronic remote control in the drawbar • Compressor 12V 18-Bar - Made in Germany • Air tank 10 liters • Charging socket for external battery charger • ASCU control system • 18mm multiplex floor panel, made of birch wood, with anti-slip coating • Lashing rails, left, right and front • Foldable license plate holder with LED lighting • Support wheel, automatic • Large-sized safety lighting • Integrated rear fog light • Reversing light • 13-pole plug _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Godpfx Anozy Almsqekb Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale exceptions apply -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically Lowerable, Sandwich Construction Equipment: - V-shaped drawbar - 10 lashing points - Manual hand pump Net price: €11,302.52 / Gross price: €13,450.00 Article number: FKS227351522.11 Technical data: • Brand: Vezeko • Model: Husky FB K B • Vehicle type: Lowering trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 344 x 157 x 220 cm • External dimensions (LxWxH): 510 x 230 x 270 cm • Loading height of the floor: 44 cm • Permissible total weight: 2,700 kg • Unladen weight: 899 kg • Payload: 1,801 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • 15 mm multiplex floor panel, made of birch wood, with anti-slip coating - extremely robust • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many stable cross members for high point loads • Body made of very thick steel sheet sandwich, insulated, 50 mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25 mm • 2-wing rear door with stainless steel rotary latch, lockable • Doors with special sealing profiles, made of hard/soft plastic • Rear frame on hot-dip galvanized steel, welded • Loading area hydraulically lowerable • Mechanical safety locking of the swivel axle during operation • With foldable stainless steel ramp at the rear • Additional longitudinal struts fully welded • Toolbox at the front • 10 lashing points inside the V-shaped loading rail, rubber-coated, tensile force (750 DaN/kg) • License plate holder at the rear • ALKO overrun device and parking brake Gjdpfozy Da Sex Anqekb • Coupling head ALKO • Very stable V-shaped drawbar, REINFORCED • Reversing aid • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Rear position lights in LED • Lighting recessed in the rear frame • Support wheel with clamping mechanism in the center _____ Accessories can be retrofitted by our specialist workshop! - Feel free to ask about your specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are reserved -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically Lowerable, Sandwich Construction Equipment: - V-drawbar - Manual hand pump - 10x lashing points Net: €11,483.19 / Gross: €13,665.00 Article number: FKS235351521.01 Technical data: • Brand: Vezeko • Model: Husky FB K B • Vehicle type: Lowering trailer • Vehicle condition: New vehicle • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 344 x 157 x 210 cm • External dimensions (L x W x H): 510 x 230 x 260 cm • Loading height of the floor: 44 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,020 kg • Payload: 2,480 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • 15mm multiplex floor panel, made of birch wood, with anti-slip coating - extremely robust • Very stable steel frame welded • Frame completely hot-dip galvanized • Many stable cross members, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 50mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • 2-wing rear door with stainless steel twist-lock closure, lockable • Doors with special sealing profiles, made of hard/soft plastic • Rear frame on hot-dip galvanized steel, solidly welded • Loading area hydraulically lowerable • Mechanical safety lock of the pivoting axle during operation • With foldable stainless steel ramp at the rear • Additional longitudinal supports continuously welded • Tool box at the front • 10 lashing points within the V-loading rail, rubber-coated, tensile force (750DaN/kg) • Number plate holder at the rear • ALKO overrun device and parking brake • Coupling head ALKO • Very stable V-drawbar, REINFORCED • Reverse automatic • 13-pin plug Gsdjzy Dx Iepfx Anqokb • Reversing light • Large-sized safety lighting • Integrated rear fog light • Rear position lights in LED • Lighting recessed in the rear frame • Support wheel with clamping collar in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, machine/vehicle number: Hapert Indigo HT-2 5,05x2,21m 3500kg mit Bordwänden, empty load weight: 1,156 kg, maximum load weight: 2,344 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 5,050 mm, loading space width: 2,210 mm, loading space height: 300 mm, Sideboards, railings, and more - 30 cm high aluminum sideboards, removable - Corner posts inserted - HAPERT locking system: robust, recessed locks with double action Ramp - Welded and hot-dip galvanized ramp - One-meter high ramp - With gas spring, lifting and lowering aid - Loading angle 10.5° Possibility to attach tarpaulins and nets - New sideboard hinges including the possibility of attaching a cargo net, among other things Chassis and frame - Hydraulically tilting platform - Low loading area Gkedpoh Ewxxefx Anqjb - Tow ball coupling with safety indicator - Chassis completely welded and hot-dip galvanized - Frame extra reinforced with two additional longitudinal members - V-drawbar Loading area and floor - Continuous, non-slip and waterproof screen-printed wood floor - 15 mm thick - Finnish birch plywood, 11-layer, waterproof glued Lighting - Modern multi-function lighting - With reversing light - With rear fog light - With two LED front marker lights - 13-pin connector Wheels and axles - Combination of suspension/wheel suspension system - Parabolic suspension including shock absorbers - Smooth driving comfort - With automatic reversing function - Tires 195/50R13C with black rim - Maintenance-free compact wheel bearings Lashing and securing options - TÜV-tested cargo securing system from HAPERT - 12 recessed mounting brackets integrated into the frame according to DIN standard with 1000 dAN (kg) per eye Other standard accessories - Adjustable winch stand with rope winch - Height-adjustable Hapert automatic support wheel with hardened roller Documents and shipping costs - Shipping costs to us already included - Including vehicle registration document (registration certificate part 2) - Including COC document (EC certificate of conformity) - No further unwanted costs - Weight reduction possible for an extra charge (pure TÜV fee) Further offers and information can be found on our website. I am not allowed to link directly, so simply enter "Dapper Anhänger" in your search engine. Photos may show optional accessories. Errors, changes and prior sale are subject to change.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Perforated sheet metal floor Equipment: - Perforated sheet metal floor - Shovel rack - 10x lashing eyes Net: €5,983.19 / Gross: €7,120.00 Article number: DPT235371700.02 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 370 x 170 x 20 cm • External dimensions (LxWxH): 562 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Unladen weight: 731 kg • Payload: 2,769 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor on the inside sides • Screen-printed wooden floor in the middle, 18mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Perforated steel individual ramps, steel galvanized, adjustable, L=1.62m • Stable ACME locking system: closes silently, loading ramps are held in place by safety clip locks, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator shovel rack • 10x lashing eyes on the side rail (1000dAN/kg), TÜV certified • Free choice of lashing points when lashing down to the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side rail • Reverse automatic • ALKO overrun device and parking brake • Coupling head made of cast steel with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED Gjdpfxozy Dlno Anqjkb • 13-pin connector • Complete LED lighting: Extremely bright, long-lasting and reliable. • LED marker lights at the rear • Reversing lights • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to inquire about your specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electronically Lowerable, Ramp Equipment: - V-drawbar - Electric pump - 10x lashing eyes Net: €9,613.45 / Gross: €11,440.01 Article number: FBA235401910.03 Technical data: • Brand: Vezeko • Model: Husky FB D 35.40/10 CAR • Vehicle type: Lowering trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 394 x 187 x 10 cm • External dimensions (LxWxH): 553 x 254 x 80 cm • Loading height of the floor: 44 cm Gkedpfszmaqmex Anqsb • Permissible total weight: 3,500 kg • Tare weight: 785 kg • Payload: 2,715 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • 15mm multiplex floor panel, made of birch wood, with anti-slip coating - extremely robust • Side panels made of anodized, double-walled aluminum profile 10cm • Insertion options at all corners for e.g. tarpaulin frame • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many stable cross members, resulting in high point load capacity • Loading platform can be lowered hydraulically • E-hydraulics for tilting with battery in the tool box of the drawbar • 12V - 74AH battery • Emergency hand pump, for manual tilting in case of an empty battery • Caution: Tool box is no longer usable! • Mechanical safety lock of the swivel axle during operation • Stainless steel ramp mounted at the rear, h = 42cm, foldable, with license plate holder at the rear • Additional longitudinal struts continuously welded in • Tool box in front • 10 lashing eyes inside the V-loading rail, rubber-coated, tensile force (750DaN/kg) • ALKO jockey wheel and parking brake • Tow hitch ALKO • Very stable V-drawbar, REINFORCED • Automatic reverse function • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Rear position lights in LED • Lighting recessed in the rear frame • Support wheel with clamp in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any special requirements! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically Lowerable, Sandwich Construction Equipment: - V-shaped drawbar - Manual hand pump - 10x tie-down points Net: €12,100.84 / Gross: €14,400.00 Article number: FKS235351621.01 Technical data: • Brand: Vezeko • Model: Husky FB K C • Vehicle type: Lowering trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 344 x 167 x 210 cm • External dimensions (LxWxH): 510 x 240 x 260 cm • Loading height of the floor: 44 cm • Permissible total weight: 3,500 kg • Chassis: Low-loader (wheels beside the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • 15mm multiplex floor panel, made of birch wood, with anti-slip coating - extremely robust • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many stable cross members, resulting in high point load capacity • Body made of very massive steel sheet sandwich, insulated, 50mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • 2-wing rear door with stainless steel twist-lock, lockable • Doors with special sealing profiles, made of hard/soft plastic • Rear frame on hot-dip galvanized steel, welded • Loading area hydraulically lowerable • Mechanical safety lock of the pivot axle during driving • With foldable stainless steel loading ramp at the rear • Additional longitudinal struts continuously welded • Toolbox at the front • 10 tie-down points inside the V-shaped loading rail, rubber-coated, tensile force (750 DaN/kg) • License plate holder at the rear • ALKO overrun device and parking brake • Coupling head ALKO • Very stable V-shaped drawbar, REINFORCED • Reverse drive automatic • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Rear position lights in LED • Lighting recessed in the rear frame • Support wheel with clamping bracket in the middle _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to make requests! _____ - Financing or leasing possible Gksdpfjzy Du Nex Anqeb - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer registration plates (Germany) can be provided. - Export registration plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted.