Used Meiller Trailers for sale (166)

Condition: used, mileage: 1,001 km, first registration: 01/2011, empty load weight: 3,000 kg, maximum load weight: 27,000 kg, overall weight: 30,000 kg, color: grey, driver cabin: other, gearing type: other, loading space length: 6,500 mm, Year of construction: 2011, Vehicle location: Bovenden, container locking Bsdsy Nd Nujpfx Agmjln Body: 30t roll-off system Meiller RK 30.62 K for containers up to 6.5 m (up to 6,500 mm container length), hydraulic axle support, aluminium chequer plate mudguards, new and used containers available, as well as hydraulic pump at extra cost. ACCESSORY DETAILS WITHOUT WARRANTY; subject to changes, prior sale, and errors!

Condition: used, maximum load weight: 28,520 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2017, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,300 mm, loading space volume: 22 m³, Equipment: ABS, * Steel half-shell tipper body * Folding under-run protection * Drum brake * Platform * ABS Blodpfx Agozh Tfmjmen * Air suspension * EBS * Roll-over cover * BPW axles All information without guarantee / subject to prior sale.

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2025, Brakes: * Wabco TEBS-E / ABS (electronic braking system with RSS) * Emergency release system for spring brake cylinders * Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums ----Axles: * BPW axles ----Suspension: * Air suspension * Automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers) ----Electrical system / Lighting: * Tire pressure monitoring system (TPMS) * 5-chamber taillights with protective cover * 15-pole power connector ----Drawbar / Flange coupling: * Curved central tube drawbar with height-adjustable 50 mm flange coupling (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the tractor unit) ----General components: * Aluminum air reservoir * Welded box-type steering linkage * Front support jack * Underrun protection at the rear * Enclosed plastic individual fenders * Access ladder on the front left outside on the front wall ----Tipping body: * Steel 3-sided tipping body with M-Jet side boards * Front wall made of 3 mm STEELECT 240 steel * Side walls with sturdy, continuous top rail inclined inwards * Side walls and tailgate made of 4 mm STEELECT steel (HBW 400) Bedpfx Aozhdxkogmoln * Continuous side walls - without center stringer * Right side wall pivoting via manual central locking - preparation for long lever and hinges for the fold-down side wall * Left side wall pivoting via manual central locking and foldable with side board spring lifter * Tailgate pivoting with automatic cam lock and 150 mm rear tailgate * Manual metering device via chain * 5 mm bridge floor made of STEELECT steel (HBW 450 steel) ----Paintwork: * Chassis painted in RAL 7021 black-grey * Painting of the side boards in RAL 9006 white aluminum ----General information: * Vehicle body complies with EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale * 2 available ----Delivery time: * Immediately available from Egestorf

Condition: new, maximum load weight: 13,320 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2026, Equipment: ABS, Brakes: Bledpjzd I Dcsfx Agmen * Wabco TEBS-E / ABS (electric braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums ----Axle: * 2 x 9 ton BPW or SAF axles ----Suspension: * Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers) ----Electrical System / Lighting: * Tire Pressure Monitoring System (TPMS) * 15-pin power connector * 5-chamber tail lights with protective cover ----Drawbar / Fifth Wheel: * Curved central tube drawbar with height-adjustable 50 mm fifth wheel (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the tractor unit) ----General Components: * Aluminum air tank, welded box-type drawbar * Front support jack * Rear underrun protection * Enclosed plastic mudguards ----Tipping Body: * Steel 3-sided tipping body with M-Jet side boards * Continuous side walls - without center supports * Right side wall pivoting via manual central locking - preparation for long levers and hinges for a folding side wall * Hydraulically folding left side wall (side board automation) * Rear tailgate pivoting with automatic cam lock and 150 mm rear gate * Manual metering device via chain ----Thickness of floor, side walls, front and rear walls: * Front wall made of 3 mm STEELECT 240 steel * Side walls with stable, continuous, inward-sloping top rail * Side walls and rear gate made of 4 mm STEELECT steel (HBW 400 steel) * 5 mm bridge floor made of STEELECT steel (HBW 450 steel) ----Roll-over Cover: Roll-over cover (RAL 9006) with crank handle at the rear and guide rail on the front wall ---- Painting: * Chassis painted in RAL 7021 black-gray * Painting of side boards in RAL 9006 white-aluminum ----General Information: * Vehicle superstructure complies with EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Immediately, from approximately week 37/2026

Condition: used, maximum load weight: 33,180 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2013, next inspection (TÜV): 10/2013, Equipment: ABS, * Meiller 3-axle tipper body * KISA 3 Bodpfx Agsy Dadwemeln * Air suspension * Lift axle * BPW axles * Wabco SmartBoard * Rolling tarpaulin

Condition: new, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2026, Brakes: * Wabco TEBS-E / ABS (electronic braking system with RSS) Bedpfxezd I Dij Agmoln * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm with asbestos-free brake linings and closed brake drums ----Axles: * 2 x 9 ton BPW or SAF axles ----Suspension: * Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers) ----Drawbar / Flange coupling: * Curved central drawbar with height-adjustable 50 mm flange coupling (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the towing vehicle) ----Electrical system / Lighting: * Tire pressure monitoring system (TPMS) * 15-pole electrical connector * 5-chamber tail lights with protective cover ----General components: * Aluminum air reservoir * Welded box-type drawbar * Support jack at the front * Underrun protection at the rear * Closed plastic individual fenders * Access ladder on the front left side, on the front panel ----Tipping body: * Steel 3-sided tipping body with M-Jet sideboards * Front panel made of 3 mm STEELECT 240 steel * Side walls with sturdy, continuous top rail inclined inwards * Side walls and rear gate made of 4 mm STEELECT steel (HBW 400) * Continuous side walls – without center rail * Right side wall pivots via manual central locking – preparation for long lever and hinges for folding side wall * Left side wall pivots via manual central locking and can be folded down with sideboard spring lift * 4 mm rear gate pivots with automatic cam lock and 150 mm rear tailgate * Manual metering device via chain * 5 mm bridge floor made of STEELECT steel (HBW 450 steel) ----Roller cover: * Roller cover (RAL 9006) with crank handle at the rear and guide rail on the front panel ----Painting: * Chassis painted in RAL 7021 black-gray * Painting of the sideboards in RAL 9006 white aluminum ----Information: * Vehicle body complies with EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Available from approximately week 37/2026

Condition: used, maximum load weight: 27,560 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 10/2012, Equipment: ABS, Attention: Accident damage, conditionally roadworthy. Equipment: * 2-axle steel tipper body, * Air suspension, * BPW axles, * Support legs, Bodpfxozvitcs Agmeln * Drum brakes, * ABS, EBS, * Roller cover, * Foldable underrun protection, * Aluminum rims * Tires 385/65 R 22.5 Other: * Original German delivery, * Payload 27,560 kg according to ZLB, * Permissible total weight 33.0 t Since 1972, we have been your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, at the Bremer Kreuz. NutzfahrzeugZentrum Behnke constantly offers approximately 200 vehicles from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We welcome the trade-in of your commercial vehicle/construction machinery. If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional cost. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sales are subject to change.

Condition: used, mileage: 1,001 km, first registration: 01/2021, color: blue, driver cabin: other, gearing type: other, loading space length: 6,100 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Year of construction: 2021, Vehicle location: Bovenden Body: Meiller three-sided tipper body with aluminum sideboards, overall length 6940mm Overall length of subframe: 6490mm Bodpfx Ajzmy Ilegmsln Frame width at the front: 900mm Frame width at the rear: 850mm ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, axle configuration: 2 axles, first registration: 09/2007, loading space length: 7,200 mm, loading space width: 2,550 mm, loading space height: 1,220 mm, total width: 2,550 mm, total height: 1,220 mm, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Central lubrication - EBS = More information = Empty weight: 4.000 kg Carrying capacity: 14.000 kg GVW: 18.000 kg Selling price: € 3.000, US$ 3.510 Tyre tread remainder on axle rear: 60% Suspension on axle rear: air Blodsx Hruyepfx Agmen Sweeper body brand: Containertransport Purchase on credit is possible: Yes

Condition: used, mileage: 1,001 km, first registration: 01/2008, color: yellow, driver cabin: other, gearing type: other, Year of construction: 2008, load capacity: 17,000 kg, Vehicle location: Bovenden, container locking system, rear support Equipment: Meiller AK 16 NT telescopic skip loader removed from Daimler-Benz Actros 2648 L 6x2/4 with 3900 mm wheelbase! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Blsdpfx Agoyniw Tjmjn

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 01/2014, loading space length: 4,900 mm, loading space width: 2,350 mm, loading space height: 1,000 mm, total length: 7,350 mm, total width: 2,550 mm, total height: 2,710 mm, suspension: air, tire size: 385/65R22,5, color: green, Year of construction: 2014, Meiller MZDA three-sided tipper. Year of manufacture: 2014. 9-ton BPW axles. Tare weight: 4940 kg. Payload: 13,060 kg. Permissible total weight: 18,000 kg. Air suspension. 1st axle as a lift axle. Side boards on the left side. Internal dimensions of the tipper body: L: 4900 mm. W: 2350 mm. H: 1000 mm. Tires: 385/65R22.5 (tread depth 60–80%). Dimensions: L: 7350 mm. W: 2550 mm. H: 2710 mm. German trailer! 2 units available! ID No.: 326. Heinhuis's general terms and conditions apply to all advertisements, offers, and quotations from Heinhuis, as well as to all contracts concluded by Heinhuis and the negotiations preceding them. By contacting us in any way, you accept the applicability of Heinhuis's general terms and conditions and confirm that you have taken note of these general terms and conditions. Our prices are net export prices. = Further information = Bledez Dr Sbjpfx Agmon Axle configuration Tire size: 385/65R22.5 Axle brand: BPW Suspension: Air suspension Center axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread left: 60%; Tire tread right: 60% Center axle 2: Max. axle load: 9000 kg; Tire tread left: 80%; Tire tread right: 80% Weights Tare weight: 4,940 kg Payload: 13,060 kg GVWR: 18,000 kg Condition Technical condition: good Optical condition: good = Company information = For more information:

Condition: used, mileage: 1,001 km, first registration: 01/2016, overall weight: 11,500 kg, color: grey, driver cabin: other, gearing type: other, loading space length: 4,600 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2016, Vehicle location: Bovenden, steel body, lashing eyes, swing tailgates Body: Meiller 3-way tipper body approx. 7m³, dismantled from DAIMLER-BENZ Arocs 1840 K 4x2 with 3900mm wheelbase! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Bjdpfx Asyxhbmsgmoln

Condition: used, maximum load weight: 26,380 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 10/2003, loading space volume: 24 m³, total width: 2,550 mm, total height: 3,100 mm, Year of construction: 2003, Equipment: ABS, 2-axle Meiller steel tipper body VIN: M08551 Chassis/Components: * Air suspension * Jost support legs * Tires: 425/65 R.22,5 * Remaining tire tread: approx. 60% front, 50% rear * 2 x BPW axles with drum brakes * Foldable underrun protection Body: * Steel tipper body / steel chassis * Volume: approx. 24 m³ * Load pressure gauge Bljdoz Dl Ebopfx Agmsn * Front supports, max 200 bar * Rear discharge chute, 400 mm * Rear tailgate as a hinged flap * Rear tailgate with 2 hook latches (mechanical) Weights: * Gross vehicle weight 33,000 kg * Payload 26,380 kg * Tare weight 6,620 kg Other: * German registration New main inspections/safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for printing and typographical errors, changes, prior sale, and errors. Subject to change!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Convince yourself! Our services for you: Loading vehicles We will gladly assist you in loading your purchased vehicles. Organizing special transports We will gladly assist you in organizing special transports. Temporary license plates / export license plates We will gladly assist you in obtaining export license plates/short-term license plates. Handling customs formalities We will gladly assist you in handling customs matters.

Condition: used, maximum load weight: 25,280 kg, overall weight: 31,000 kg, axle configuration: 3 axles, first registration: 04/2014, loading space length: 6,600 mm, loading space width: 2,400 mm, loading space height: 1,400 mm, loading space volume: 20 m³, Year of construction: 2014, Equipment: ABS, Stock No. 5707 Approx. 20 m³ Meiller compact tipping semi-trailer with hydraulic tilting gate / paving machine brake ----* Manufacturer: Meiller * Type: MHPS 42/2 * First registration: 04/2014 * Gross vehicle weight: 31,000 kg * Unladen weight according to vehicle registration document: 5,720 kg * Payload: 25,280 kg * Axles: 2 x BPW with 1st axle as lift axle / drum brakes * Suspension: Air suspension * Tires: 425/65 R 22.5 approx. 50% on steel rims * Color: Chassis black, tipping body grey, tarpaulin grey * EBS Wabco * Volume: approx. 20 m³ (6.60 m long x 2.40 m wide x 1.40 m high) * Hydraulically operated tilting gate with additional locking mechanisms * Roll tarp with tensioning straps * Operating platform at the front with access on the left * Full-load supports (aluminum prop supports) * Saddle height loaded 1.27 m * Paving machine brake * Individual fenders * LED reversing lights * Foldable underrun protection * Approx. 4.00 m aluminum extension ladder on the right German trailer!! German documents!! Note regarding possible errors in the advertisement: Blodpjx S T Ncefx Agmen Despite careful preparation of the advertisement, isolated errors may have crept into the text or the information provided. We assume no liability for errors, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 01/2014, loading space length: 4,900 mm, loading space width: 2,350 mm, loading space height: 1,000 mm, total length: 7,350 mm, total width: 2,550 mm, total height: 2,710 mm, suspension: air, tire size: 385/65R22,5, color: green, Year of construction: 2014, Meiller MZDA three-sided tipper. Year of manufacture: 2014. 9-ton BPW axles. Unladen weight: 4940 kg. Payload: 13,060 kg. Permissible total weight: 18,000 kg. Air suspension. 1st axle as a lift axle. Control panel on the left side. Internal dimensions of the tipper body: L: 4900 mm. W: 2350 mm. H: 1000 mm. Tires: 385/65R22.5 (tread depth 60–80 %). Dimensions: L: 7350 mm. W: 2550 mm. H: 2710 mm. German trailer! 2 units available! ID No.: 331. Heinhuis's general terms and conditions apply to all advertisements, offers, and quotations from Heinhuis, as well as to all contracts concluded by Heinhuis and the negotiations preceding them. By making any form of contact, you accept the validity of Heinhuis's general terms and conditions and declare that you have taken note of these conditions. Our prices are net export prices. = Further information = Bjdjz D Sk Dopfx Agmoln Axle configuration Tire size: 385/65R22.5 Axle brand: BPW Suspension: Air suspension Center axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread left: 60%; Tire tread right: 60% Center axle 2: Max. axle load: 9000 kg; Tire tread left: 80%; Tire tread right: 80% Weights Unladen weight: 4,940 kg Payload: 13,060 kg GVW: 18,000 kg Condition Technical condition: good Optical condition: good = Company information = For more information:

Condition: used, empty load weight: 6,770 kg, maximum load weight: 35,230 kg, overall weight: 42,000 kg, axle configuration: > 3 axles, first registration: 08/2026, suspension: air, tire size: 385/65 22,5, tire condition: 100 %, color: blue, Year of construction: 2023, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 41014 Meiller, steel tipper body * Year of manufacture: 2023 * ABS, Anti-lock Braking System * EBS, electronic brake system * Lift axle * Connector plug, 2x7-pin * Connector plug, 15-pin * Lifting and lowering mechanism * Storage box / toolbox * Platform * Suspension: Air * Gross vehicle weight: 42,000 kg * Tare weight: 6,770 kg * Payload: 35,230 kg * Permissible gross vehicle weight: 42,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 100% - 100% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 100% - 100% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 100% - 100% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Manufacturer: Serin * Hardox steel round tipper body * Volume approx. 27 m³ * Lift axle * Shuttle valve * Folding underrun protection Blodpfx Agozwb Axjmsn * SAF axles and disc brakes * Outrigger supports for full load * Water tank * Toolbox * Hardox floor, 6 mm; walls, 5 mm * Control panel Disclaimer: Subject to changes, prior sale, and errors. More photos and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained specialists. We will be happy to advise you.

Condition: new, maximum load weight: 28,380 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 25 m³, Year of construction: 2026, Equipment: ABS, Brake system: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * 22.5” disc brakes * Paver brake with shortened rear mudguards and manual paver switch ----Axle: * 3 x 9-ton BPW Eco axles * 1st axle liftable with traction aid * Meiller-specific torsion cross member ----Suspension: * Air suspension with raise/lower system and automatic lowering during tipping (can be deactivated for increased stability when using pavers) ----Electrics / Lighting: * Smart Board: raising/lowering and lift axle lowering, axle load display, odometer, odometer error code reading * Tire Pressure Monitoring System (TPMS) * 1 x 15-pin trailer socket * LED tail lights with protective cover ----General attachments: * Aluminum air tank * BPW telescopic landing gear with plate foot * 4 m aluminum access ladder stored on the right side of the frame * Closed plastic single mudguards * Folding underride guard * Folding A-sign * Tow eye at the rear * Bolted access ladder with folding lower part at the front left * Document pouch on the front wall ----Chassis frame: * Chassis made of high-strength fine-grained steel ----Tipping body: * Semi-circular steel rear tipper body made from Hardox HBW-450 steel * Side walls with strong, continuous, inwardly inclined top rail * Front and rear walls set at an angle * Overlapping rear tailgate with double hinges and automatic 2-hook locking system ----Thickness of the floor, sides, front and rear walls: * Tailored floor 5 / 6 mm * 4 mm side walls made of HBW 450 steel * 4 mm rear wall made of HBW 450 steel * Front wall outside 3 mm BS50 steel and inside 3 mm BS70 steel ----Hydraulic cylinder: * Front medium-pressure hydraulic cylinder ----Tarp: * Electric sliding tarp -RAL 9006 white aluminum- with remote control or right side manual switch operation * 600 mm tarp carrier at the front wall ----Saddle height: * Unladen: 1,247 mm * Laden: 1,217 mm ----Loading volume: * approx. 25 m³ ----Painting: * Chassis painted in RAL 7350 nova grey ----General information: * Thermal insulation according to DIN 70001 and prepared for measurement technology - bracket without sensors * New vehicle with manufacturer's warranty * --Permissible gross weight 39,000 kg technically possible-- * Errors and prior sale excepted Blsdpfx Agjr Exzuomen ----Delivery time: * Available immediately from Egestorf

Condition: new, maximum load weight: 28,640 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 25 m³, Year of construction: 2026, Equipment: ABS, Brakes: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release system for spring brake cylinders * Disc brakes 22.5" * Parking brake with shortened rear fenders and manual parking brake switch ----Axles: * 3 x 9-ton BPW or SAF axles (depending on availability) * Lift axle with start-up assistance ----Suspension: * Air suspension with automatic lowering during the tipping process (to increase stability, can be deactivated for asphalt pavers) ----Electrical System / Lighting: * Tire pressure monitoring system (TPMS) * 1 x 15-pole trailer socket * 5-chamber rear lights with protective cover * 1 x additional LED work light * Flashing side marker lights ----General Components: * Aluminum air tank * Jost telescopic steel landing gear with plate foot (can only be coupled in the unloaded state) * 4 m aluminum extension ladder stored on the right side over the fender * Closed plastic individual fenders * Folding underrun protection * Towing eye at the rear * Folding access ladder on the left side at the front * Document box on the front panel ----Frame: * Chassis made of high-strength fine-grained steel with Meiller-specific torsion crossmember ----Tipping Body: * Half-shell steel rear dump body * Front panel with 600 mm front canopy as a tarpaulin support * Side walls with stable, continuous, inward-sloping top rail * Front and rear walls angled ----Thickness of Floor, Side Walls, Front and Rear Walls: * Front wall 4 mm made of BS 70 steel * Tailgate 4 mm made of 4 mm HBW 400 steel Bodpsxxf Twjfx Agmeln * Side walls made of 4 mm HBW 450 steel * Tailored floor made of 5 / 6 mm Hardox 450 steel ----Hydraulic Cylinders: * Front hydraulic cylinders with medium working pressure ----Hydraulic Rear Wall: * Fixed and pivoting hydraulic rear wall. Control of the hydraulic rear wall via a mechanical ball valve block ----Tarpaulin: * Electric sliding tarpaulin - RAL 9006 white aluminum - with switch on the chassis and remote control ----Load Volume: * Approx. 25 m³ ----Saddle Height: * Unloaded approx. 1,247 mm * Loaded approx. 1,217 mm ----Painting: * Painting of the chassis in RAL 7021 black gray * Tipping body in RAL 9006 white aluminum ----General Information: * --Technically possible total permissible weight of 39,000 kg-- * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: * Available from week 37 / 2026

Condition: new, maximum load weight: 28,600 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space volume: 25 m³, Year of construction: 2026, Brakes: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Disc brakes 22.5" * Auxiliary brake with shortened rear fenders and manual auxiliary brake switch ----Axles: * 3 x 9-ton BPW or SAF axles (depending on availability) * Lift axle with starting aid ----Suspension: Bjdpfx Aexxf Tqogmoln * Air suspension with automatic lowering during tipping (to increase stability, can be deactivated for asphalt pavers) ----Electrical System / Lighting: * Tire pressure monitoring system (TPMS) * 1 x 15-pole trailer socket * Eco-LED II lighting with protective roof * 1 x additional LED work light * Flashing side marker lights ----General Components: * Aluminum air tank * Telescopic steel support legs with plate base (can only be coupled in the empty state) * 4 m aluminum ladder, stored on the right side above the fender * Closed plastic individual fenders * Folding underrun protection * Towing eye at the rear * Folding access ladder on the left side at the front * Document box on the front wall ----Frame: * High chassis frame made of high-strength fine-grained steel with Meiller-specific torsion crossmember ----Tipping Body: * Half-shell steel tipper body made of STEELECT 450 steel -HBW 450- * Front wall with 600 mm front roof as a tarpaulin support * Side walls with stable, continuous, inwardly inclined top rail ----Thickness of floor, side walls, front and rear wall: * Front, side and rear wall 4 mm * Front and rear wall angled * Tailored floor 5 / 6 mm ----Hydraulic Cylinders: * Front hydraulic cylinders with medium working pressure ----Hydraulic Rear Wall: * Resting and pivoting hydraulic rear wall. Control of the hydraulic rear wall via a mechanical ball valve ----Tarpaulin: * Electric sliding tarpaulin -RAL 9006 white aluminum- with manual switch on the chassis and remote control ----Load Volume: * Approx. 25 m³ ----Saddle Height: * Unladen approx. 1,350 mm * Laden approx. 1,340 mm ----Painting: * Painting of the chassis in RAL 7021 black gray * Tipping body in RAL 9006 white aluminum ----General Information: * --Maximum permissible total weight of 39,000 kg technically possible-- * Errors and prior sale reserved * New vehicle with manufacturer's warranty ----Delivery Time: * Available from week 37/2026

Condition: used, maximum load weight: 32,560 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2022, Equipment: ABS, Vehicle identification number: W09SHL339MSM08580 TILTING DAMAGE – DUMP BODY HAS TIPPED OVER – TILTING CYLINDER DEFECTIVE Unladen weight: 6,440 kg Dump body dimensions: 7,600 x 2,300 x 1,700 mm Volume: approx. 28 m³ MOT: 08.2027, Inspection: 02.2027 ----SAF axles with DRUM BRAKES LIFT AXLE Drop-down outriggers Platform Externally mounted swing door Roll cover Adjustable underrun protection Bledpouk S S Defx Agmjn Tires: 385/65 R 22.5 Changes, prior sale and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase contract is decisive. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops! The vehicle may be covered with and/or labeled with advertising. Our general terms and conditions of delivery and payment apply.

Condition: new, maximum load weight: 27,520 kg, overall weight: 33,000 kg, axle configuration: 2 axles, loading space volume: 25 m³, Year of construction: 2026, Brakes: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release system for spring brake cylinders * Drum brakes 420 x 180 mm * Factory-installed brake with shortened rear mudguards and manual factory-installed brake switch ----Axle: * 2 x 9 ton BPW or SAF axles (depending on availability) * Lift axle with starting aid ----Suspension: * Air suspension with automatic lowering during the tipping process (to increase stability, can be disabled for asphalt paving applications) ----Electrical System / Lighting: * Tire pressure monitoring system (TPMS) * 1 x 15-pole trailer socket * Eco-LED II lighting with protective roof * 1 x additional LED work light * Flashing side marker lights ----General Components: * Aluminum air tank * Telescopic steel support legs with plate foot (can only be lowered in unloaded condition) * 4 m aluminum ladder stored on the right side, above the mudguard * Closed plastic individual mudguards * Folding underride guard * Towing eye at the rear * Folding access ladder on the left front side ----Frame: * Chassis made of high-strength fine-grained steel with Meiller-specific torsion crossmember ----Tipping Body: * Half-shell steel rear tipping body made of STEELECT 450 steel -HBW 450- * Front wall with 600 mm front roof as a tarpaulin support * Side walls with stable, continuous, inward-sloping top rail * Front and rear walls – angled * Document box on the front wall * Hinged tailgate with rubber seal and 2 additional twist locks, as well as automatic 2-hook locking system ----Thickness of floor, side walls, front and rear walls: * Tailored floor 5 / 6 mm * Front wall 4 mm * Side wall 4 mm * Rear wall 4 mm ----Hydraulic Cylinders: * Front hydraulic cylinders with medium working pressure ----Tarpaulin: * Electric sliding tarpaulin -RAL 9006 white aluminum- with manual switch on the chassis and remote control ----Load Volume: * approx. 25 m³ ----Fifth Wheel Height: * unladen approx. 1,250 mm * laden approx. 1,220 mm ----Paintwork: Bledpfxew Eg Eke Agmjn * Chassis painted in RAL 7021 dark gray * Tipping body painted in RAL 9006 white aluminum ----General Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: * Available from week 37/2026

Condition: used, mileage: 1,001 km, first registration: 01/2011, overall weight: 20,000 kg, color: black, driver cabin: other, gearing type: other, Year of construction: 2011, Vehicle location: Bovenden, Body: 20t Meiller RK 20.70 hooklift system for containers up to 7 m, removed from Actros 2551 L 6x2 with 4800 mm wheelbase! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Blsdeyf Nwbopfx Agmsn

Condition: new, first registration: 01/2019, overall weight: 21,500 kg, color: white, driver cabin: other, gearing type: other, loading space volume: 14 m³, loading space length: 5,600 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Year of construction: 2019, Vehicle location: Bovenden, steel superstructure, chute, pendulum flaps Body: Meiller 3-sided tipper body with chute approx. 14m³ Year of construction 2019! Bsdpfxovhibbj Agmoln Dismantling of Daimler-Benz Arocs 4145 K 8x4/4 with a wheelbase of 4550mm and leaf suspension! ACCESSORY INFORMATION WITHOUT WARRANTY, changes, prior sale and errors excepted! - .

Condition: new, first registration: 01/2019, overall weight: 21,500 kg, color: white, driver cabin: other, gearing type: other, loading space volume: 14 m³, loading space length: 5,600 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Year of construction: 2019, Vehicle location: Bovenden, steel superstructure, chute, pendulum flaps Body: Meiller 3-sided tipper body with chute approx. 14m³ Year of construction 2019! Dismantling of Daimler-Benz Arocs 4145 K 8x4/4 with a wheelbase of 4550mm and leaf suspension! ACCESSORY INFORMATION WITHOUT WARRANTY, changes, prior sale and errors excepted! Bjdpevhh Uasfx Agmoln - .

Condition: new, first registration: 01/2019, overall weight: 21,500 kg, color: white, driver cabin: other, gearing type: other, loading space volume: 14 m³, loading space length: 5,600 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Year of construction: 2019, Vehicle location: Bovenden, steel superstructure, chute, pendulum flaps Body: Meiller 3-sided tipper body with chute approx. 14m³ Year of construction 2019! Dismantling of Daimler-Benz Arocs 4142 K 8x4/4 with a wheelbase of 4550mm and leaf suspension! ACCESSORIES WITHOUT WARRANTY, changes, prior sale and errors excepted! - . Bedpsvhh Erefx Agmeln