Used Schwarzmüller Tipper Semitrailers for sale (286)

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,880 mm, loading space width: 2,420 mm, loading space height: 980 mm, Year of construction: 2026, SAF axles, drum brakes Internal length approx. 4,880 mm Internal width approx. 2,420 mm Total width max. 2,550 mm Unladen loading height approx. 1,510 mm Sliding tarpaulin Platform Kedpjylf Rqofx Afnedn Lashing rings in the tipper floor Interim sale and errors reserved! Vehicle available for rent and lease purchase!

Condition: used, empty load weight: 5,100 kg, maximum load weight: 12,900 kg, first registration: 03/2014, next inspection (TÜV): 04/2025, total length: -1 mm, total width: 25,500 mm, suspension: steel-air, tire size: 245 / 70 R 17.5 / 8mm, front tire size: 245 / 70 R 17.5 / 8mm, operation weight: 18,000 kg,

Condition: used, empty load weight: 8,300 kg, maximum load weight: 17,700 kg, first registration: 09/2016, next inspection (TÜV): 03/2025, total width: 25,500 mm, suspension: air, tire size: 385 / 55 R 22.5 / 8mm, front tire size: 385 / 55 R 22.5 / 8mm, operation weight: 26,000 kg,

Condition: used, axle configuration: 3 axles, first registration: 11/2020, color: yellow, Year of construction: 2020, Equipment: ABS, = Additional options and accessories = - Air suspension - Disc brakes Kodpfxjy Drw Ns Afnedn - Toolbox = Notes = Schwarzmüller S1 J-series Mega 2020 Grey Pallet box VAVJS1339LD458620 = Further information = Unladen weight: 6,110 kg Payload: 29,890 kg GVW: 36,000 kg APK (Technical Main Inspection): valid until 12/2026 Damage: none

Condition: used, maximum load weight: 13,690 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2017, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,850 mm, Equipment: ABS, Welcome to TOC Ksdpezcr Ukofx Afnjdn The number 1 for used commercial vehicles since 1999 Find more commercial vehicles on our website. This offer is non-binding. Errors and prior sale excepted. If a foreign currency is indicated, the current exchange rate applies. The currency at the vehicle location is binding.

Condition: used, first registration: 07/2018, next inspection (TÜV): 07/2026, Year of construction: 2018, Equipment: ABS, Schwarzmüller Megatrailer Coil Widenable BPW Lifting Roof At a glance: · First registration: 05.07.2018 · Year of manufacture: 2018 · Colour: Blue · Unladen weight: 7,250 kg · Tyres: 435/55 R 19.5 · Note: Immediately available Special Equipment: 7.50 m coil trough, extendable; 4 extension marker boards; BPW axles; lifting roof; 15 pairs of heavy-duty hooks; 12 pairs of lashing rings; post pockets; XL certificate; Wabco SmartBoard; pallet impact strips (left & right); toolbox; 4 rows of aluminium slats; spare wheel holders with spare wheels; 2x7 + 1x15-pin electrical connectors; Jost landing legs; rotating beacon bracket at the rear; customs cord; ADR panel; A-sign panel; 2 fire extinguisher brackets; document box; TÜV valid until 07/26. Standard Equipment: 3-axle, disc brakes, ABS, EBS, raise/lower valve, reinforced front wall, access ladder at rear, 2 wheel chocks, Edscha sliding roof bar, underride guard. Errors, mistakes and prior sale reserved. The seller reserves the right to withdraw from the sale. _____ Internal reference for inquiries: TR26154 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Sales contacts: Kodjy R Iq Eopfx Afnsdn Mr. Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: also WhatsApp t: @: Mr. Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / also WhatsApp t: -104 @: Mr. Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / also WhatsApp t: -123 @: We speak 13 languages. Surely yours as well. Contact us! Homepage: Facebook: Instagram: Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks and vans. Michael Doblhofer (German, English) p: also WhatsApp t: -102 @: Bastian Wagner (German, English) p: WhatsApp t: -103 @:

Condition: used, overall weight: 18,000 kg, first registration: 03/2017, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, - Excellent condition - Suitable for ADR - Edscha Kedpfjy Hn Dwex Afnjdn

Condition: used, maximum load weight: 29,280 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 13,260 mm, loading space width: 2,480 mm, loading space height: 2,945 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, SCHWARZMÜLLER 3-axle SANH Mega-Curtainsider with a 9-ton loading platform – in near-new condition For sale is an exceptionally equipped SCHWARZMÜLLER Mega-Curtainsider for professional forklift and machinery transport. The semi-trailer dates from 10/2024, was used exclusively as a trade show or exhibition vehicle, and is in new condition both technically and visually. The total mileage to date is only 7,937 km. Of particular note is the extremely robust design with a reinforced chassis, high-load-capacity floor structure, and the powerful DHOLLANDIA loading platform with a 9,000 kg load capacity and a traversable platform up to 14,000 kg. Thanks to the hand-hydraulically operated lift roof, the front and rear sliding EDSCHA cover, the extendable rear opening, and the integrated air hose system in the roof, the semi-trailer is ideal for transporting forklifts, construction machinery, industrial goods, and other special loads. Technical data: * First registration: 10/2024 * Mileage: 7,937 km * Technically permissible total weight: 39,000 kg * Tare weight: 9,720 kg * Internal length: 13,600 mm * Internal width: 2,480 mm * Internal height at the front: 2,895 mm (can be raised by 60 mm) * Internal height at the rear: 2,945 mm (can be raised by 60 mm) * Fifth wheel height: 960–1,050 mm Highlights: * Reinforced chassis for point loads up to 20 t over 5 m * High-load-capacity floor structure for forklift axle loads up to 7,200 kg * DHOLLANDIA loading platform, 9,000 kg load capacity * Platform traversable up to 14,000 kg * Remote control for loading platform Kedpfx Afjxcrq Donedn * Hydraulic rear support * Lift roof, 400 mm lift height * EDSCHA sliding cover, can be moved forward and backward * Sliding tarpaulin, Code XL * Extendable rear portal * Inflatable air hose system in the roof * Lift axle and trailing steering axle * Full LED lighting * Tire pressure monitoring system * WABCO trailer EBS with RSS stability program Inspection possible at any time by appointment. Financing, leasing, and nationwide delivery available upon request. Errors and prior sale excepted. RENTING is the new BUYING, immediately available with our FULL-SERVICE RENTAL.

Condition: used, maximum load weight: 31,640 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2027, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,730 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle SCHWARZMÜLLER Full-ALU Walking Floor Semi-Trailer 91 cbm First registration Internal dimensions (LxWxH): 13,500 x 2,470 x 2,680/2,780 mm Fifth-wheel height: 1,150 to 1,200 mm Axle distance: 1,310 mm Ksdpjyrlcgefx Afnedn Unladen weight: 7,380 kg ALU chassis SAF axles with large 430 mm disc brakes, reinforced "Off-Road" version WABCO trailer EBS with roll stability support (RSS) 1st axle lift axle Aluminum air tanks 6x 385/65 R 22.5 tires JOST full-load crank landing gear ASPÖCK full-LED lighting 4 x LED work lights Toolbox rear left Full-length seam-welded interior wall profiles CARGOFLOOR moving floor with 21 slats, material thickness 8 mm ribbed Remote control operation Rear end plate made of stainless steel 3 bows, reinforced for waste transport Reinforced roof tarpaulin PANAMA 900 g/sqm Swinging rear cross beam With grain hatch in left door leaf 15 pairs of recessed lashing rings in the end profile RENTING is the new BUYING – available from us immediately, also in FULL-SERVICE RENTAL.

Condition: used, maximum load weight: 25,660 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2022, Year of construction: 2022, Equipment: ABS, Schwarzmüller RH240 Jumbo Platform Semi-Trailer Low Loader, Daily Registration. Extendable telescopic type – suitable for building materials and construction equipment transport. - Condition: as new - Gross vehicle weight: 36,000 kg Curb weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width at lower platform approx. 2,540 mm Loading height in the low-bed section (unladen) approx. 830 mm Frame: Extendable central frame welded construction Extension length 6,000 mm Pneumatic locking, actuated from the trailer + additional position for 40ft container in the low-bed section Reinforced design for building material transports, rated for 20 t over 5 m at the center of gravity and for construction machine transports up to 20 t Frame suitable for transport of wooden components L/W/H approx. 13,000/575/3,200 mm Reinforced frame for point load front and rear at load supports Reinforced outer frame on gooseneck plateau 6 mm Reinforced outer frame in low-bed section 6 mm Tapered cross members Adjustable intermediate support approx. 300 mm (not removable), mechanically lockable, designed as stake pocket cross member for 80x80 mm square tube stanchions, and 1 pair of 5 t lashing rings integrated externally in intermediate support Frame suitable for 2-axle tractor units, unladen coupling height approx. 960 mm – 1,020 mm with air-suspended tractor Front: 3 pairs, rear: 10 pairs of 10 t sliding lashing rings in the outer frame, both sides, also foldable outward for oversize load securing 10 pairs of lashing mushrooms with welded round steel at the bottom of the outer frame Frame attachments: Kdsdpfx Aju A Nhnofnen 10 pairs of plug-in housings with reinforcing beams for 80x80 mm square tube stanchions, both sides of outer frame 6 stake pocket cross members for 80x80 mm stanchions 24 steel square tube stanchions, 80x80x5 mm, useable height approx. 2,000 mm, with lashing holes for tie-downs at the top, hot-dip galvanized 3 pairs of recessed container locks in the low-bed plateau for: - 1 x 20ft container - 1 x 30ft container - 1 x 40ft container in extended state U-profile rail for loading ramps at end of frame Support equipment: Manual steel support winches, 2 x 12 t 2 drop-down supports, both sides at rear of frame Wheels: Tires 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low-loader axles with drum brakes Axle lift on 1st axle Axle distance 1,310 + 1,410 mm Friction-steered SAF trailing axle, approx. 20° steering angle, electro-pneumatic reverse lock automatically engaged in reverse gear Last axle is hydraulically steered Braking system/Suspension: Braking system by Wabco Brake/air connections with 2 single coupling heads yellow/red, EBS/ABS socket at front Air suspension with raise/lower function, total stroke approx. 200 mm Automatic adjustment to programmed driving level from 15 km/h Assistance/Safety systems: Standard reporting interval: - Every 15 minutes with ignition on - Every 24 hours with ignition off Axle load display via EBS CAN-bus signal for display in truck cab (truck must be correspondingly pre-equipped) Wabco SmartBoard for reading out data via display (mileage, axle load, brake diagnostics, etc.) Floor: 35 mm larchwood floor, impregnated on both sides, longitudinally laid with small gaps, over wheels with steel chequer plate cover Front wall: Fixed profiled steel front wall, approx. 2,700 mm high with 2 center supports 2 front corner pos

Condition: used, maximum load weight: 31,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2020, next inspection (TÜV): 04/2026, loading space length: 13,376 mm, loading space width: 2,468 mm, loading space height: 2,753 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Schwarzmüller S1 J02VLN3 Moving Floor Walkingfloor 91 m³, 1st Lift Axle, Aluminium 21-plank 6 mm smooth floor, 13 lashing rings per side left and right, Permissible total weight: 39,000 kg, Unladen weight: 7,400 kg, Payload: 31,600 kg, Coupling height unladen: 1,160 mm, Hydraulic connection at the front wall, Cable remote control, SAF axles, 1st lift axle, Air suspension, Disc brakes, Portal doors, each with one external rotating rod lock per door wing, Pneumatically operated safety lock on the rear doors, Side and rear underrun protection, 2x crank supports, Ksdpfx Asyvwttjfnodn Access ladder at rear right, Residual discharge moving wall, Storage box on the left, Metal bumpers, Standing platform at the front wall with maximum tread width, railing, and access for roll tarp operation, Aluminium 21-plank 6 mm smooth floor, Roll tarp, Load protection tarp, 1x positioning ladder, Holder for shovel and broom, Air coupling head (red + yellow), 2x 7-pin plug connectors, 1x 15-pin plug connector, 2x hydraulic couplings, 3x hoops, 3x aluminium clamping beams, 13 lashing rings per side left and right, Knorr brake system, ABS, EBS, ALB, DIN EN 12642 Code XL, Wheelbase: 6,500 + 1,300 + 1,300 mm, Loading area LxWxH (up to tarp): 13,376 x 2,468 x 2,753 mm, External dimensions LxWxH: 13,950 x 2,550 x 4,000 mm, Rear upper crossbar pivoting, Clear loading height at rear with crossbar closed: 2,641 mm, Foldable protective cover for lighting on lamp carrier, Spare wheel holder, Tyres: 385/65R22.5 on steel rims, Tyre tread depth left front: 4 mm, Tyre tread depth left centre: 4 mm, Tyre tread depth left rear: 4 mm, Tyre tread depth right front: 4 mm, Tyre tread depth right centre: 3 mm, Tyre tread depth right rear: 8 mm, Additional Equipment: Axle load monitoring via Canbus STATT, Hydraulic connections: 2-line hydraulic system, connections between support legs, pressure left, return right; 2-line hydraulic system, connections at the front wall, pressure right, return left, 4,500 mm maximum distance from the tractor's front edge to the fifth wheel centre, 2,240 mm minimum clear front distance from fifth wheel centre, 1,900 mm maximum rear swing radius, Internal length approx. 13,500 mm (without dividing wall), Internal width approx. 2,470 mm, Loading volume approx. 91 m³ (without dividing wall), Internal loading height front approx. 2,680 mm, Internal loading height rear approx. 2,780 mm, Rear entry height approx. 2,630 mm, Total height unladen front approx. 4,000 mm, Total height unladen rear approx. 3,990 mm, Coupling height unladen approx. 1,160 mm, Loading height front approx. 1,320 mm, Loading height rear approx. 1,220 mm, Welded aluminium frame construction, Short lightweight chassis up to the support legs, Frame height front approx. 150 mm, SAF Intradisc B9 axles with disc brakes Ø430 mm (22.5" disc), load capacity 9 t/axle, reinforced axle bodies, offroad version, Axle spacing 1,310 + 1,310 mm, Lift axle on 1st axle, lifts and lowers automatically depending on weight, with forced lowering and speed-limited drive-off assistance for button operation in the cab and operation by “3 x braking”, RSS – roll stability program, Spring-loaded parking brake on 2 axles, Aluminium air tanks, Air suspension with raise/lower facility, total lift approx. 200 mm, Moving floor body: Aluminium construction from hollow profiles 30/3/2.5 mm, profile width 600 mm, with upper stabilising frame, side with integrated track for dividing wall, re

Condition: used, maximum load weight: 30,250 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2014, next inspection (TÜV): 06/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, Year of construction: 2014, Equipment: ABS, Schwarzmüller Platform Flatbed Trailer Lift Axle Permissible total weight: 36,000 kg, Unladen weight: 5,750 kg, Payload: 30,250 kg, SAF axles, Lift axle 1st axle, Air suspension, Disc brakes, Underride protection right, left, and rear, 2x storage compartment right, 1x storage compartment left, Rubber rear impact buffer, Kdedpfjwqyrhex Afnen 2x extensible wide load signs at the front, 2x extensible wide load signs at the rear, 2x crank supports operable from right side, EBS, ABS, Perforated external frame with hole spacing approx. 100 mm, Wheelbase: approx. 6,350 + 1,310 + 1,310 mm, External dimensions LxW: approx. 13,840 x 2,550 mm, Loading area LxW: approx. 13,620 x 2,480 mm, Front wall height: approx. 2,400 mm, Loading height: approx. 1,250 mm, Tires: 385/65R22.5, Tread depth tires left front: 4 mm, Tread depth tires left middle: 16 mm, Tread depth tires left rear: 8 mm, Tread depth tires right front: 5 mm, Tread depth tires right middle: 15 mm, Tread depth tires right rear: 10 mm, Further equipment: Reinforced steel frame welded construction for point load 20 t over 4 m at frame center of gravity for ASH unladen 1,090 - 1,190 mm with air-suspended tractor, replaceable 2" kingpin (EU installation size, corner dimension 2,040 mm), Perforated external frame with hole spacing approx. 100 mm, oval hole 40/25 mm according to DIN EN 12640 Air suspension with lift and lower function (approx. +120/-80 mm), Automatic setting of driving level from 15 km/h, SAF "Intradisc-plus-Integral" air suspension unit with low-maintenance disc brakes, ø 430 mm, 3 x 9 t rigid, wheelbase 2 x 1,310 mm, Front axle automatically liftable = 2-sided lift (1 x 96307) lifts and lowers automatically depending on weight (when lift axle is raised, the loading or total height increases by approx. 50 mm) and additionally with forced lowering incl. integrated start-up aid limited by speed for button operation in the cab (without button installation), 1 odometer = hubodometer (ECO-Meter) (KIT No. 10801, with hubcap KIT No. 52917) (on 2nd axle front right), Mech. 2 x 12 t support winches, single-sided operation and push compensation, Two-line brake, EBS-E - electronic brake system (Wabco 2S2M = one axle = 2nd axle monitored), RSS - stability program, Spring-loaded parking brake on 2 axles, Aluminum air tank, unpainted, Plywood floor 27 mm, flush with outer frame, 2 steel hat profile rails above the longitudinal beams plus additional 12 mm plywood floor, beveled to the outer frame, Fixed aluminum hollow profile front wall 2,400 mm with 2 center supports,

Condition: new, overall weight: 36,700 kg, axle configuration: 3 axles, Equipment: ABS, Schwarzmüller RH240 Jumbo Flatbed Low Loader Semi-Trailer Extendable telescopic design – for building material and construction machinery transport - NEW - UNUSED - Gross vehicle weight rating: 36,000 kg Curb weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width (lower deck) approx. 2,540 mm Loading height in well (unladen) approx. 830 mm Frame: Extendable central-frame welded construction Extension length 6,000 mm Pneumatically lockable, operation on the trailer + additional position for 40ft container in the well Reinforced design for building material transport, rated for 20 t over 5 m at center of gravity and for construction equipment transport up to 20 t Frame is suitable for the transport of timber components L/W/H approx. 13,000/575/3,200 mm Reinforced frame for spot loads front and rear at support blocks Reinforced outer frame in the cranked platform 6 mm Reinforced outer frame in the well 6 mm Tapered cross members Sliding intermediate support approx. 300 mm (not removable), mechanically lockable, as stake pocket cross member for 80x80 mm box stakes, as well as 1 pair of 5 t lashing rings on the outside integrated into the intermediate support Frame for 2-axle tractor units, coupling height unladen approx. 960 mm – 1,020 mm with air-suspended tractor 3 pairs front and 10 pairs rear, 10 t lashing rings, extendable at both sides on the outer frame, can also be folded outwards for oversize securing 10 pairs of lashing mushrooms with welded-in round steel on the underside of the outer frame Frame Attachments: 10 pairs of stake pockets with reinforcement for 80x80 mm box stakes, both sides on the outer frame 6 stake pocket cross members for 80x80 mm box stakes 24 steel box section stakes, 80x80x5 mm, effective height approx. 2,000 mm, with lashing holes at top for straps, hot-dip galvanized 3 pairs of container locks in the well platform, retractable, for 1 x 20ft container 1 x 30ft container 1 x 40ft container (when extended) U-profile rail for drive-on ramps at end of frame Landing Gear: Mechanical steel landing gears, 2 x 12 t 2 drop-down supports, both sides at rear of frame Wheels: Tyres 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Self-steering SAF trailing axle, approx. 20° steering angle, electro-pneumatic reverse lock automatically activated in reverse Last axle is trailing steering axle Brakes/Suspension: Brake system by Wabco Brake/air connectors with 2 individual coupling heads yellow/red, EBS/ABS socket at front Air suspension with raise/lower function, total lift approx. 200 mm Automatic leveling to programmed ride height above 15 km/h Assistance/Safety Systems: Standard reporting interval Every 15 minutes with ignition on Every 24 hours with ignition off Axle load indicator via EBS canbus signal for display in driver's cab (truck must be equipped accordingly) Kdsdpou A Nilefx Afnen SmartBoard by Wabco for reading data via display (kilometres, axle aggregate load, brake diagnostics, etc.) Floor: 35 mm larch floorboards, impregnated on both sides, fitted longitudinally with small gaps, above the wheels with steel chequer plate covers Front Wall: Fixed profiled steel front wall, approx. 2,700 mm high with 2 central supports 2 front corner posts, integrated into the front wall, bolted on face side 2 lashing points each on the up

Condition: used, overall weight: 44,000 kg, axle configuration: 3 axles, first registration: 04/2020, Year of construction: 2020, Equipment: ABS, 12172 FLATBED SEMI-TRAILER WOOD SCHWARZMÜLLER 3-axle Y series / STAKE SEMI-TRAILER LONG / SHORT Manufacturer: SCHWARZMÜLLER First registration: 04/2020 Dimensions: 13,150 x 2,550 x 2,800 mm Gross vehicle weight: 44,000 kg Unladen weight: 5,820 kg Payload: 32,480 kg Fifth wheel load: 12,000 kg Air suspension Air suspension lift/lowering function Disc brakes Spare wheel holder Axle manufacturer: SAF HD 430 mm Lifting axle Chassis paint: RAL 7021 black grey Tyres: 6 Tread depth: 15/15/16/16/12/12 mm Rear axle tyres: 385/65 R 22.5 Ideal for long timber, short timber, or sawn timber Kodpfxow Higme Afnjdn Lightweight frame made from high-strength NAXTRA special steels Steel chequer plate cover between the frame beams above the running gear and at the front Grapple protection plates on the frame beams Reinforced steel profile front wall, approx. 2,500 mm high with central support 2 x steel box-section cross supports, chamfered on both sides 8 ECCO STEEL 9 t stakes Suitable for sawn timber transport Stakes mounted via welded clamp fittings = repositionable Each stake on left and right with one lashing bracket for strap hooks Aluminium air tanks / standard approval for 40,000 kg gross weight Approval up to 44,000 kg gross weight with permit All information without guarantee, subject to prior sale! If you have any questions regarding this or other vehicles, please call us. If you have any questions about this or another trailer/car, please call us.

Condition: used, maximum load weight: 33,580 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2017, next inspection (TÜV): 07/2026, total width: 2,550 mm, total height: 4,000 mm, Model year * Model year: 2017 Other dimensions and weights * Payload: 33,580 kg * Permissible total weight: 39,000 kg Kodjxq Ilyopfx Afnodn ----Location 90518 Altdorf near Nuremberg at Noris Truck Center Subject to errors and changes

Condition: used, empty load weight: 3,500 kg, maximum load weight: 35,500 kg, first registration: 04/2012, next inspection (TÜV): 10/2025, total width: 25,500 mm, suspension: air, tire size: 385 / 55 R 22.5 / 8mm, front tire size: 385 / 55 R 22.5 / 8mm, operation weight: 39,000 kg,

Condition: used, empty load weight: 3,500 kg, maximum load weight: 35,500 kg, first registration: 04/2012, next inspection (TÜV): 10/2025, total width: 25,500 mm, suspension: air, tire size: 385 / 55 R 22.5 / 8mm, front tire size: 385 / 55 R 22.5 / 8mm, operation weight: 39,000 kg,

Condition: used, empty load weight: 5,420 kg, maximum load weight: 33,580 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2017, next inspection (TÜV): 07/2026, total length: 13,840 mm, color: red, gearing type: mechanical, fuel consumption (urban): 1,384 l/100km, lifting height: 4,000 mm, Unladen weight: 5,420 kg, permissible total weight: 39,000 kg, location: 90518 Altdorf bei Nürnberg at Noris Truck Center. Errors and changes excepted. Kdjdpfexq Ip Eex Afnjn

Condition: used, maximum load weight: 29,870 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2021, loading space length: 15,000 mm, loading space width: 2,450 mm, loading space height: 2,750 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2021, Equipment: ABS, Schwarzmüller J-Series Long Trailer ---- Nutzfahrzeuge Göppl GmbH ---- Used vehicle - immediately available from 1st owner First registration: 19.11.2021 Vehicle inspection (HU): 11/2026 Safety inspection (SP): 05/2026 Unladen weight: 6,130 kg Gross vehicle weight: 36,000 kg Technical gross weight: 39,000 kg Payload: 29,870 kg Overall length: 15,300 mm Kdodpfoxym I Sjx Afnon * JOST landing gears, front and rear * Tyres: 385/65R22.5 * SAF axles * Full air suspension, 3x 9t * 1st axle liftable * Sliding curtain/Edschaverdeck roof * Aluminium side slats * Rear portal doors * Extendable ladder * Spare wheel holder (without spare wheel) * Plastic toolbox Inspection by appointment possible at our Weiden location ---- Nutzfahrzeuge Göppl GmbH Weiden - Regensburg - Leupoldsgrün - Bamberg - Nuremberg DAF Authorized Dealer - DAF Service Partner - FIAT Professional Service Partner Subject to errors and prior sale Sale only to commercial customers.

Condition: used, maximum load weight: 14,050 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2011, loading space length: 7,000 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, Year of construction: 2011, Equipment: ABS, * HUGENTOBLER UL-18 Ksdpfxjyhtnij Afnedn * Through-loading system * Flatbed with tarpaulin * Aluminium floor * Cargo area length 7,000 mm * Cargo area height 2,500 mm * Aluminium rims * Tyres 385/55R22.5 * Payload 14,050 kg * Unladen weight 3,950 kg * Year of manufacture 2011 * Condition: Very good * Working hours: Mon-Fri 07:30-12:00, 13:00-18:00; Saturday 07:30-17:00 * E-mail: * Tel/ WhatsApp/ Viber: Alexandar Ilic * Tel/ WhatsApp/ Viber English: Mladen Ilic

Condition: used, maximum load weight: 14,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2009, next inspection (TÜV): 10/2009, Building materials trailer 1350 mm loading height Air suspension BPW axle 385/65 R 22.5 tyres 7100 mm x 2480 mm, 1200 mm fold-down aluminium side walls 40 mm towing eye with telescopic function Toolbox on the left Ksdpfxewy A Uko Afnsdn

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2019, Equipment: ABS, Vehicle identification no.: VAVTAZ218KH428356 Unladen weight: 4,050 kg German MOT until 04/2026 - Roadworthiness inspection until 10/2026 BPW Eco axles with disc brakes Dimensions: 7,100 x 2,470 x 1,000 mm Drawbar with 40 mm towing eye Pallet box Tyres: 385/65 R 22.5 Ksdpfx Aex S S Hmofnedn Aluminium wheels Modifications, prior sale, and errors excepted. This description is provided for general identification of the vehicle and does not constitute a warranty in the legal sense of a sales contract. The binding description is the one specified in the sales agreement. Our offer is generally without new technical inspection (TÜV). If a new inspection is required, we will gladly provide an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2007, Equipment: ABS, Vehicle Identification Number: VAVAHP2187H256982 Kedpfexpa Eiox Afnedn Unladen weight: 3,640 kg German MOT due BPW Eco Plus axles with disc brakes Dimensions: 7,100 x 2,470 x 1,000 mm Drawbar with 40 mm eye 2 x toolboxes Tyres: 385/65 R 22.5 Spare wheel holder WITHOUT spare wheel Modifications, prior sale, and errors are expressly reserved. The description serves for general identification of the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase contract is binding. Our offer is generally without new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops! The vehicle may have advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2008, Equipment: ABS, Vehicle Identification Number: VAVT202188H283598 Unladen weight: 3,600 kg German MOT due - Safety Inspection 05/2026 BPW Eco axles with drum brakes Dimensions: 6,800 x 2,470 x 1,000 mm Drawbar with 40 mm eye 2 x toolboxes Tyres: 385/65 R 22.5 Kdsdpfoxq Ii Ssx Afnsn Spare wheel carrier WITHOUT spare wheel Specification subject to change, prior sale, and errors excepted. The description is for general identification purposes only and does not constitute a guarantee in the legal sense of a sale. The contractual description is binding as per the purchase agreement. Our offer is generally without a new technical inspection (TÜV). Should a new inspection be required, we are happy to provide a quote from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2017, Equipment: ABS, Vehicle Identification Number: VAVJS1339HD399804 First registration: 21.09.2017 German Inspection (HU) valid until 10/2026 – Safety Inspection (SP) until 04/2027 Unladen weight: 6,450 kg ---- Large portal doors Internal height: 2,950 – 3,000 mm L-profile Kdsdpfx Aey A Arzefnon Side loading height: 2,790 – 2,850 mm Pallet stop strips on both right and left sides SAF axles with disc brakes Sliding curtain, Edscha system Tyres: 435/50 R 19.5 Modifications, prior sale and errors excepted. This description serves for general identification of the vehicle and does not constitute a warranty as defined by sales law. The contractual description in the purchase agreement is decisive. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! Vehicle may be labelled and/or stickered with advertising. Our general terms and conditions of delivery and payment apply.