Used Krone Semitrailers With Swap Body for sale (1,227)

Condition: used, maximum load weight: 13,060 kg, overall weight: 16,000 kg, first registration: 10/2000, loading space length: 7,300 mm, loading space width: 2,420 mm, loading space height: 2,400 mm, Year of construction: 2000, * KRONE WK 7.3 RSTG * 745 BDF swap body * Rear roller door * Clothes rail racks left/right * Unladen weight: 2.9 kg * Gross weight: 16,000 kg ---- Please no emails, phone calls only!!! Subject to prior sale and errors! Functionality of extras not guaranteed! Duodpfx Absx In Tne Aep We also speak: ENG / ITA / HR / SRB / BiH Your contact: Ludvig Kozuha, mobile WhatsApp, Viber Over 20 years of experience in commercial vehicle purchase and sales! - RELIABLE & FAIR - Former DAF contract partner!

Condition: new, Year of construction: 2024, color: white, overall weight: 16,000 kg, empty load weight: 2,950 kg, loading space volume: 45.5 m³, loading space width: 2,470 mm, loading space length: 7,290 mm, loading space height: 2,525 mm, Swap body, smooth steel BDF system, 7,450 mm long. Brand new smooth-walled steel swap body, BDF system, 7,450 mm long, rear portal doors with double internal espagnolette locks. External dimensions: L = 7,450 mm, W = 2,550 mm, H = 2,750 mm. Parking height: 1,320 mm. Total weight: 16,000 kg, empty weight: 2,950 kg. Body in RAL 9010 pure white. Telescopic support legs in RAL 9005 jet black for a storage height of 980 - 1,320 mm. Interior fittings as follows: Roof with anti-condensation coating without roof light window. 27 mm thick, waterproof glued plywood floor, strength according to EN 283, for floor loads up to 5,460 kg forklift axle load. Floor panels with smooth side facing up. Ideal for furniture transport. (A sliding friction value of at least 0.3 is not achieved, therefore the use of anti-slip mats, for example, is necessary for Code XL.) Forklift protection on 3 sides, approx. 360 mm high. Internal end wall with wooden paneling and 3 rows of lashing rails horizontally on the end wall. Internal side walls fully lined with keyhole plates and 3 rows of rod lashing rails horizontally embedded in the side walls. Mounting heights: 800 mm / 1,600 mm / 2,200 mm. Includes 2 locking bars for keyhole plates and combination/slotted-hole lashing rails. Includes load securing certificate according to EN 12642 Code XL. All values given are approximate dimensions in mm and kg. This offer is subject to change without notice; Subject to prior sale. Net prices ex location D-59558 Lippstadt-Rixbeck. Further properties can be found at . . Duedetzdt Uepfx Ab Aep

Condition: new, Year of construction: 2023, color: silver, overall weight: 16,000 kg, empty load weight: 2,430 kg, loading space volume: 47.5 m³, loading space width: 2,480 mm, loading space length: 7,280 mm, loading space height: 2,630 mm, Swap-body platform, sliding tarpaulin BDF system 7,450 mm long, FACTORY NEW Brand new swap-body platform with Edscha sliding tarpaulin, BDF system, 7,450 mm long.\nHigh portal doors at the rear with internal espagnolette locks.\nSPECIAL HEIGHT: 2,900 mm!\n\nBody in RAL 7035 light grey, sliding tarpaulins in RAL 9006 white aluminum.\nSupport legs in RAL 9005 jet black. \nParking height: 980 to 1,320 mm.\nRear portal loading height: 2,525 mm\n\nEquipment:\n27 mm thick, waterproof screen printing plate floor. \nForklift accessible, axle load up to max. 5,460 kg.\nMultilock outer frame\n4 sets of LM insertable slats\nSliding roof (can only be moved from rear to front) \nIncl. load securing certificate body / tarpaulin EN 12642 Code XL.\n\nDelivery date on request. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Dujdpfx Abotib Nmj Aep

Condition: used, mileage: 1 km, first registration: 02/2011, color: red, loading space volume: 52 m³, loading space length: 7,700 mm, loading space width: 2,470 mm, loading space height: 2,720 mm, Swap body, double wing door with espagnolette lock at the rear, interior walls covered with screen printing, 1 x anchor rail for locking bars on each side, screen printed floor, vehicle can be covered with advertising and/or lettering Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us! Dedpfx Aet N Drtjb Aoup

Condition: used, Dear customers, Dodpfx Aomn Tfijb Aoup You will find our complete vehicle stock of used swap systems, directly from the manufacturer at: Further details on request: Brüggen Swap-Store Beckumer Str. 51 59302 Oelde

Condition: used, Dear customers, Duedpfxjmn Tpte Ab Ajp You will find our complete vehicle stock of used swap systems, directly from the manufacturer at: Further details on request: Brüggen Swap-Store Beckumer Str. 51 59302 Oelde

Condition: used, Dear customers, Duodpfx Abjmn Ui Es Ajp You will find our complete vehicle stock of used swap systems, directly from the manufacturer at: Further details on request: Brüggen Swap-Store Beckumer Str. 51 59302 Oelde

Condition: used, Dear customers, You will find our complete vehicle stock of used swap systems, directly from the manufacturer at: eggen-gmbh Further details on request: Brüggen Swap-Store Beckumer Str. 51 59302 Oelde ☎ 📱 Dusdpfx Aemn Uc Hsb Aep ✉ swapstorebrueggen-gmbh

Condition: used, functionality: fully functional, Year of construction: 2015, color: blue, overall weight: 16,000 kg, loading space length: 7,820 mm, loading space height: 2,700 mm, reception height: 1,120 mm, We sell or rent out approximately 80 double-decker box bodies with roller shutter doors. Double-decker box body. Length: 7,820 mm. Internal height: 2,700 mm. Portal height inside: 2,525 mm. Total height: 2,925 mm. Corner height: 2,900 mm. Closed box body construction. 19 Euro pallet spaces. The box bodies are located in Southern Germany and in 49504 Lotte. Dujdpfxew Hxxrj Ab Ajp

Condition: not inspected (used), functionality: unexamined, color: white, 7.82 BDF Krone smooth-sided swap body with portal doors, used (multiple available) Parking height 1120 mm The swap body is waterproof External dimensions in mm approx.: Length 7820 Width 2550 Height 2925 Interior dimensions in mm approx.: Length 7700 Width 2480 Height 2700 Lashing: Keyhole 4 container corner fittings on a 20' base, symmetrical overhangs 4 grab rails Floor Type: BO WST 27 mm thick, waterproof, glued plywood floor, strength according to DIN EN 283; For floor loads up to 5,460 kg forklift axle load Box body Interior height approx.: 2,700 mm Total height approx.: 2,925 mm Corner height approx.: 2,900 mm Enclosed structure Smooth side walls made of galvanized sheet steel cassettes Duodpfxjwbgrpo Ab Ajp Roof made of trapezoidal profiled sheet steel, overall height: 25 mm 2 ventilation gills per side wall # Rubbing strip and side wall with recesses Forklift collision protection inside, 3-sided, approx. 300 mm high Smooth end wall made of galvanized sheet steel cassettes Interior end wall with 21 mm plywood panel, 750 mm high, with a continuous 12 mm plywood panel above it Exterior end wall with offset at the top (optimized for cornering) Interior side walls fully covered with keyhole plates 13 steel guide rails recessed on the left and right for Double-deck loading beam Light-weight loading beam for double-deck loading Steel collision protection horizontally mounted on the left and right rear profile. Please note: Actual dimensions and other specific details may vary slightly from the above specifications due to continuous product improvement.

Condition: new, Year of construction: 2025, color: white, overall weight: 16,000 kg, loading space volume: 45.5 m³, loading space width: 2,470 mm, loading space length: 7,290 mm, loading space height: 2,525 mm, Swap body, smooth steel BDF system, 7,450 mm long, brand new, REDUCED TOP PRICE from a canceled order!! Brand new steel smooth-sided swap body, BDF system 7,450 mm long, rear portal doors with double internal espagnolette locks.\n\nFloor panels with smooth side facing up\nFelt covering on the side walls above the forklift collision guard\n3 rows of rod lashing rails in the side walls\nRoof made of trapezoidal profiled sheet steel\nBody painted RAL 9010, support legs RAL 9005 black\n\nAll stated values are approximate dimensions in mm and kg.\n\nThis offer is subject to change without notice and subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects at . . Dusdpfexwy R Uox Ab Ajp

Condition: used, Year of construction: 2007, color: red, overall weight: 16,000 kg, empty load weight: 2,800 kg, loading space volume: 45.1 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,480 mm, Swap body with drop sides and tarp, BDF system, 7,450 mm long, new ROLLFIX TARPAULIN in RAL 5002 ultramarine blue, used swap body with drop sides and tarp, BDF system, 7,450 mm long. Swap body can be used as a storage container. Dodpoxv D Rpefx Ab Ajup NEW Rollfix-type tarpaulin in RAL 5002 ultramarine blue. Some parts of the swap body show signs of rust. Typical signs of use, deformations, impacts and damages. Superstructure painted in RAL 3003 ruby red. All stated values are approximate dimensions in mm and kg. This offer is non-binding; prior sale reserved. Prices net, ex location D-59558 Lippstadt-Rixbeck. See more items at . .

Condition: refurbished (used), functionality: fully functional, color: white, 7.82 m BDF Krone Smooth-Sided Swap Body, used (multiple units available) Color: White Drop-off height: 1120 mm The swap body is watertight and the roller shutter door operates smoothly. Approximate external dimensions (mm): Length 7820 x Width 2550 x Height 2925 Approximate internal dimensions (mm): Length 7700 x Width 2480 x Height 2700 Dsdpfjvxbfmsx Ab Aeup Door opening (mm): Width 2370 x Height 2530 Lashing: Keyhole type Permissible total weight for approval/operation: 16,000 kg Intermodal ready, incl. rail coding to DIN EN 13044 Rail approval Code XL (for rail transport at speeds over 120 km/h) Floor frame: 195 mm high floor module incl. floor panel; rectangular tube longitudinal beams with cross members and outer frame as welded construction with underfloor guide tunnel 4 container corner castings on 20' basis, symmetrical overhangs, 4 grab bar profiles 7 pairs of lashing rings at the sides in the rubbing strip Floor: Type: BO WST 27 mm thick, waterproof bonded phenolic resin-coated plywood floor, strength as per DIN EN 283; suitable for forklift axle loads up to max. 5,460 kg 2 ventilation openings at the front in the floor (as per GGVS) Box body: Superstructure type: AB WST Internal height: 2700 mm Portal height (internal): 2525 mm Total height: 2925 mm Corner height: 2900 mm Closed superstructure Smooth side walls made of galvanized steel sheet panels Roof made of trapezoidal profiled steel sheets, panel height: 25 mm 2 ventilation grills per side wall Rubbing rail and side wall with recesses; internal forklift impact protection, 3-sided, approx. 300 mm high Front wall smooth, made of galvanized steel sheet panels Interior front wall with 21 mm phenolic resin-coated plywood, 750 mm high, above that continuous 12 mm plywood Exterior front wall upper section offset (optimized for cornering) Rear wall with roller shutter door (net width: 2370 mm), with DB Train Plus approval, replaceable rollers Flat steel impact protection for roller shutter guide rails Side walls internally fully covered with keyhole plates 13 steel guide rails recessed left and right for double-deck load bars 13 LM load beams for double-deck loading Horizontal steel impact protection on rear profile, left and right Note: Actual dimensions and other specific details may vary slightly from the above due to ongoing product improvements.

Condition: refurbished (used), functionality: fully functional, 7.82 BDF Krone smooth wall swap body, used (several available) The swap body including the roof is painted on the outside in the customer's color. Common RAL color The substructure and parts of the support feet are not painted, this is not visible after setting it down on the ground. Parking height 1120 mm The swap body is waterproof and the roller door is standard. External dimensions in mm approx: Length 7820 Width 2550 Height 2925 Dusdpfovv R Ifex Ab Asp Inner dimensions in mm approx: Length 7700 Width 2480 Height 2700 Door openings in mm: Width 2370 Height 2600 Lashing: keyhole For registration/operation maximum permissible. Total weight: 16,000 kg KLV-capable, including rail coding according to DIN EN 13044 Rail approval Code XL (for rail transport over 120 km/h) Floor frame 195 mm high floor assembly including floor; rectangular tube longitudinal beams with cross beams and outer frame as a welded construction with guide tunnel underneath 4 container corner fittings on a 20' base, symmetrical overhangs 4 gripper bars 7 pairs of lashing rings on the side in the rub rail Floor Type: BO WST 27 mm thick, waterproof glued screen-printed panel floor, strength according to DIN EN 283; for floor loads up to max. 5,460 kg forklift axle load 2 ventilation openings at the front in the floor (according to GGVS) Case housing Structure TYPE AB WST Inner height: 2700 mm Portal height i. L. 2525 mm Total height: 2,925 mm Corner height: 2,900 mm Closed structure Smooth side walls made of galvanized sheet steel cassettes Roof made of trapezoidal profiled sheet steel, construction height: 25 mm 2 ventilation gills per side wall # Rubbing strip and side wall with recesses Forklift collision protection inside, 3-sided, approx. 300 mm high Smooth front wall made of galvanized sheet steel cassettes Inside front wall with 21 mm screen-printed panel, 750 mm high, above it a continuous 12 mm screen-printed panel Outside front wall at the top with offset (optimized for cornering) Rear wall as roller door (width in length 2370 mm), with DB approval Train Plus, rollers can be replaced Flat steel collision protection for roller door guide rail Inside side walls completely covered with keyhole plates 13 steel guide rails each set into the left and right to accommodate double-decker loading beams 13 LM loading beams for double-decker loading Steel impact protection horizontally on the rear profile, left and right Please note: Actual dimensions and other specific details may differ slightly from the above information due to continual product improvement.

Condition: ready for operation (used), functionality: fully functional, color: white, 7.45 BDF Krone Jumbo smooth-wall swap body, used Exterior color: White Parking height from 920-1320 mm possible. The swap body is waterproof and the roller door is open. Forklift pockets Stackable External dimensions in mm approx.: Length 7450 Width 2550 Height 2950 Interior dimensions in mm approx.: Length 7289 Width 2470 Height 2700 Door openings in mm: Width 2370 Height 2550 Lashing: Keyhole Weight: Tare 3340 kg Maximum payload: 12660 kg Maximum gross weight: 16000 kg Floor load capacity: 5460 kg Capacity: 49.74 m Pallet capacity (in mm) Euro 800x1200 18 Metric 1000x1200 14 Cage mesh 835x1240 16 Dujdpfx Aeuvibtsb Asp “Aussie” 1170x1170 12 Please note: Actual dimensions and other specific details may vary slightly from the above specifications due to continuous product improvement.

Condition: used, Year of construction: 2002, color: white, overall weight: 16,000 kg, empty load weight: 2,980 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, steel beaded BDF system 7,450 mm, with roller shutter door, LACK NEW Body completely overhauled, completely blasted and primed,\nnewly painted in RAL 9010 white,\nfactory-new white rigid support legs (can be exchanged for telescopic ones if required) \nrear aluminium roller shutter door, new rubber seals on roller shutter door, internal height 2500 mm,\n\nInternal 3 rows of combination anchor rails\n\nDelivery date possible at short notice. Leasing possible. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found at . . Duodpfxoub T Tps Ab Asp

Condition: used, color: black, maximum load weight: 18,000 kg, empty load weight: 2,585 kg, loading space width: 2,480 mm, loading space length: 9,195 mm, machine/vehicle number: WKEAZ000001090172, Damage present on the left side of the vehicle: left side underrun protection is deformed and dented, left rear mudguard and plastic cover of the left rear underrun protection show abrasions, wheel nut covers on the front and rear left are partially missing/broken. Front connection cable repaired/patched and with abrasion marks. Front right underrun protection deformed and compressed. Signs of use present. Dujdpfew Rpzdjx Ab Asp

Condition: used, Year of construction: 2011, color: white, overall weight: 18,000 kg, empty load weight: 3,020 kg, loading space volume: 45.9 m³, loading space width: 2,470 mm, loading space length: 7,300 mm, loading space height: 2,545 mm, Swap body, corrugated steel, BDF system, 7,450 mm long, NEW PAINT!! Used, fully refurbished corrugated steel swap body. BDF system, 7,450 mm long * Superstructure completely blasted, primed, and NEWLY PAINTED in RAL 9010 white. * Substructure blasted, primed, and treated with underbody protection. * Installation of factory-new aluminum double-wing doors with galvanized rod locks and new rubber seals. * Factory-new telescopic support legs in black * Forklift pockets, corner locks in the roof – stackable * Interior with keyhole plates in the corrugations * Wooden floor * Access ladder at the rear * New UVV (accident prevention regulation) Delivery possible. Djdpfxsxmkuve Ab Ajup All stated values are approximate measurements in mm and kg. This offer is subject to change and prior sale. Prices are net ex location D-59558 Lippstadt-Rixbeck. You will find more items at . .

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system 7,450 mm long, premium paint NEW in white Used steel - smooth wall swap body BDF system 7,450 mm long, rear with aluminum roller door.\nInside keyhole system in the side walls.\n\nPREMIUM refurbishment:\n- Premium 2K paint - high gloss in RAL 9010 white\n- Underbody blasted, primed and repainted in RAL 9010 white\n- Support legs repainted in RAL 9010 white\n- Structure completely overhauled with new UVV\n- Roof painted 40 cm all around - rest sprayed\n- Scrub base rolled in gray\n- New galvanized ladder\n- New galvanized gill plates installed after painting\n- Contour marking on the bottom side of the entire length in white\n- Contour marking on the rear in the corners in red\n\nAll values given are approximate dimensions in mm and kg.\nThe offer is subject to change and prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more objects at . . Dodpsvm Dfxsfx Ab Aoup

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system 7,450 mm long, paint NEW in Premium Plus Used smooth steel swap body BDF system 7,450 mm long, rear with aluminum roller shutter.\nInternal keyhole system in the side walls.\n\nPREMIUM-PLUS refurbishment:\n- Premium 2 K paint finish - high-gloss - here in RAL 9010 white\n- Underbody blasted, primed and repainted in the body color\n- New roller shutter cables\n- New rubber seals on the roller shutter\n- New support legs - fixed or telescopic\n- Superstructure overhauled with new UVV\n- Roof painted all around 40 cm - rest with fogging\n- Scuff plate rolled in grey\n- New galvanized access ladder\n- New galvanized gill plates fitted after painting\n- Contour markings on the sides at the bottom along the entire length\n- Contour markings at the rear in the corners\n\nAll values given are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Duedpfx Aouzlxmjb Aop

Condition: used, color: grey, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished steel smooth wall swap body, BDF system, 7,450 mm long.\nBody newly painted in RAL 7040 window gray. Aluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff plate \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We would be happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrub base, rolled on the inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step extension ladder\nIncl. new cable anchor plates and steel cables on the roller shutter door\nIncl. new side and bottom seals on the roller shutter door\nIncl. 7 steel plates on the sides and front wall as well as new circumferential sealing seam\nIn order to prevent corrosion\nIncl. UVV functional test certificate\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is non-binding, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Duodopg Dtcepfx Ab Ajp

Condition: new, color: white, overall weight: 16,000 kg, empty load weight: 1,890 kg, loading space width: 2,480 mm, Interchangeable platform, building material version BDF system, 7,450 mm long. Building material swap-body platform, BDF system, 7,450 mm long. \nWith drop sides, high bulkhead and tailgate.\n\nBody frame and bulkhead newly painted in RAL 9010 white, telescopic support legs new in black,\nAnodized drop sides 800 mm with recessed opening handles,\nAnodized tailgate with foot step, fold-out,\nBody blasted and provided with underbody protection\n\nAll values stated are approximate dimensions in mm and kg.\n\nThe offer is subject to change. Subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found at . . Dujdpfx Absu H Nr Ie Aep

Condition: used, color: blue, overall weight: 16,000 kg, empty load weight: 2,700 kg, loading space volume: 44.9 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,480 mm, Swap-body platform, sliding tarpaulin BDF system, 7,450 mm long, AIRPIPE possible - no water bag or ice on the roof! Used and refurbished swap-body platform with sliding tarpaulin, BDF system, 7,450 mm long.\n\nOur services:\nNew paintwork in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nSandblasting work and cleaning of the underbody\nUnderbody provided with underbody protection\nIncl. new side tarpaulins and new roof tarpaulin (also possible in code XL)\nIncl. brand new rigid or telescopic support legs (on request) in RAL 9005 deep black\nIncl. galvanized new 4-step extension ladder\nIncl. new foam rubber seal on the portal doors\nIncl. UVV functional test certificate\n\n\nWith AIRpipe system possible! against ice and water on the roof! (see pictures)\n\n- AIRpipe is suitable for any type of interchangeable body with tarpaulin ( sliding roof or fixed tarpaulin roof ) \n- No time-consuming, manual de-icing - no risk of your drivers falling\n- No traffic hazards due to falling ice sheets\n- Less stress on tarpaulins and superstructures due to gentle removal\n- Cost-effective and time-saving\n- Easy handling\n- Only the air line connection to the truck must be connected by the operator, everything else is prepared\nAdditional price AIRpipe: EUR 1.450,- net\n\nPossible interior equipment structure:\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor (depending on the version).\n\nAll values given are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä. . Dujdpju T Rvfsfx Ab Asp

Condition: used, Year of construction: 2012, color: white, overall weight: 16,000 kg, empty load weight: 2,890 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, smooth steel BDF system 7,450 mm, rear roller shutter used. Smooth steel swap body with aluminium roller shutter, ready for use. Body lettering removed, technically inspected and supplied with new UVV (accident prevention regulation). Interior keyhole system. Duedpoqkdavsfx Ab Asp New paintwork available on request. All stated values are approximate measurements in mm and kg. Delivery possible. Offer is subject to prior sale and without obligation. Prices are net ex location D-59558 Lippstadt-Rixbeck. You can find additional equipment at . .

Condition: used, Year of construction: 2011, color: green, overall weight: 16,000 kg, empty load weight: 3,140 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, corrugated steel BDF system 7.45, NEW PAINT in RAL 6024, BRAND NEW portal doors * Structure completely blasted, primed and NEW PAINTED in RAL 6024 traffic green or RAL color as desired.\n* Substructure blasted, primed and painted in body color.\n \n* Installation of brand new aluminum double-leaf doors with galvanized espagnolette locks and new rubber seals.\n\n* Brand new telescopic support legs in black,\n* Forklift pockets, corner locks in the roof - stackable,\n* Inside keyhole plates in the corrugations\n* Wooden floor\n* new UVV\n\nDents behind the keyhole plates unavoidable - some present as used.\n\nAll values given are approximate dimensions in mm and kg.\nDelivery time on request. Delivery possible.\n\nThe offer is subject to change and prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more objects at . . Djdpfjvzb Ruox Ab Ajup